creating a view and use the view in a model

Similar Questions

• Create new Orgs by using the API (hr_organization_api.create_hr_organization) and details additional Org Unit

  Hello

  I created some orgs again using the API (hr_organization_api.create_hr_organization)

  I also want to create additional details Org Unit FDF but not sure which API to use.

  I am trying to insert data into attriubute1, 2 and 3 of the table to hr_all_organization_units by using the API, however the hr_organization_api.create_hr_organization API only allows me to use a segments of1 to 30 in the parameters of the API and NOT the attribute columns

  Can someone please suggest.

  Thank you

  Hello

  As you have rightly noted, hr_organization_api.create_hr_organization is not the settings to meet the ATTRIBUTE?.

  You could try calling the hr_organization_api.update_organization with the "p_organization_id" returned by the API call 'create '.

  Kind regards

  Rajen

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.

• Data Modeler: how to create and use the collection type

  Hello
  essentially of departure I don't understand how (for example) create and use the data based on the type of data varray type.
  
  Please notify.
  Thank you
  Andrew

  Hi André,.

  You can create new types of collection (varray/table) in two ways:
  (1) in the browser - find 'Types of data' > 'Types of Collection' node menu dropdown - there just 'create new collection type' it
  (2) in the types of data model diagram - you can create collection "some type structured" or collection of references to the it - use 'new Collection... '. "tool and click first on sight structured type and after the structured type that will contain the collection - new attribute is added to the latter and if there is none this type of collection already didn't set the new collection type are created and you can change it later.

  Philippe

• How can know you if someone has consulted and used the default Administrator account in Vista?

  I was not aware that the default Administrator account is so easily accessible if there is no password on it. In my view, a standard user has accessed this and it seems that the computer is having a lot of problems now. Is there a way to tell? Needless to say I care that much personal info could acceded as well as commercial information.  Security, 3 administartors (users) appears in some of the boxes, and I only know 2 of them, myself and the default admin?  I'm a recruit of the computer and the other person is somewhat a geek so I could really use some help. I am the system administrator, but don't really know what to look for. I would really appreciate if some wiz could help me.

  Thank you

  Hello

  You can't find if someone has consulted and used the default Administrator account in Vista. You will need to set up a password so that no one will be able to access the admin account.

• I have a document composed of separate PDF files that reside in a folder and are related to each other through hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I have a link to a PDF file to another and use the button "Previou

  I have a document composed of separate PDF files that reside in a folder and are related to each other through hyperlinks. Each pdf file is configurΘ for dΘmarrer with bookmarks displayed, however if I have a link to one PDF file to another and use the "back" button to return to my starting point bookmarks are replaced by "vignette". Is there anyway to prevent this?

  Hi Mike,.

  While the implementation of the links, if you choose to open the file in a new window then you will not experience this issue, then you can simply switch to the file view and previous bookmark will remain as it is.

  Is that what helps with your query?

  Kind regards
  Rahul

• Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

  I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

  I have the SSD and the caddy

  I need to:

  delete the original OEM HD

  Install the SSD

  install OEM HARD drive in secondary Bay

  Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

  or I have to

  delete this HD

  Install the SSD

  go into the BIOS, and then assign him drive in AHCI (etc.)

  Install Win 7

  install OEM HARD drive in secondary Bay

  etc.

  I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

  is this true?

  Pavilion dv7 - 6143cl

  I7

  8Gb

  Win7 (64)

  Thank you very much

  Hello:

  Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

  If so, you have an AHCI BIOS default.

  If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

  I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

  So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

  To install W7 on your SSD, check your own install of W7 disc.  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Can't answer your question on the dual boot as I never did before.

  Paul

• How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  You create a document by using an application of word processor like Microsoft Word or Corel WordPerfect or OpenOffice Writer.  Think of it as a broad a page roll.

  When you print the document, you can print all pages of the document on one sheet of paper (the normal default value), or you can print on both sides of a sheet of paper.

  Some printers are capable of automatic double-sided printing.  With others, you print all the odd pages and then take the stack of paper, turn upside down and put it back into the printer to print all pages.  You need either to read your printer manual, or experiment a bit to determine if you need to re - organize the first last pages before printing the second side.

• Please how to create an e-commerce using the muse of adobe

  Please how to create an e-commerce using the muse of adobe

  ECWID is certainly the easiest to customize muse and it's very easy for customers to add/manage products. Another thing that many people love in Ecwid, it's that you can host several stores account. If you know css/javascript then you can do this on your own, but if you want a widget that does, make these widgets.

  If you are looking for some great Ecwid widgets, you can enter these ones that are free. And if you are wanting to customize even more (including the ability to host multiple account stores), you can get these even more impressive widgets for $14.99 with promo code: 1MUSESTORE #.

• I've created a form that uses the value field text to fill the text of another field.  Does not take into account changes

  I've created a form that uses the value field text to fill the text of another field.  However, if I need to change the text, the second field does not update this change.  Instead of reset the form each time, is the Javascript code to update the fields if they have been modified?

  For example I Text1 and Text2.

  When I type in Hello in Text1 I see Hello in Text2.

  Later, if I decide to change to Goodbye Text1, Text2 remains Hello.

  The shape of the hoe can recognize this change?

  Thank you

  Edit: I think I have misunderstood the situation.

  If you want to both fields have the same value, just to give them the same name.

• I need acrobat pro to open a pdf file I created in quark and reduce the size of the file?

  I need acrobat pro to open a pdf file I created in quark and reduce the size of the file?

  It may be preferable to use a downsampling image option in Quark during the pdf creation process.

• Can I create a cursor and set the values by myself

  Can I create a cursor and set the values by myself, and it has not been filled by an SQL?
  
  Thanks in advance

  Yes, you can.
  Use variables with a default value or nvl (some_parameter, some_variable) in your cursor WHERE predicate.
  They provide an example if it isn't clear, since that's all I can think about reading your post...

• href="file://f://myfile.ext would not specify the hard drive and use the same directory as my html file.

  When you use href="file://f://myfile.ext' it will open fine in Firefox 3.6.8. However, I wish NOT hard code hard drive and use the location of the same player if my html file that calls this href link.
  I tried to use href="file:///myfile.ext" and it does not work. I get an error message saying file not found.
  For ie browser I can just specify href = "" / myfile.ext "and it works very well."
  This is a simple html file that refers to several local files and I have everything on a usb key (IE my F drive). The memory stick will be sent to several people and their USB can be another letter.

  I found a solution to my problem. Found I could just specify
  href = "MyFile.ext" and he will see when he's in the same directory as the html code containing the reference. " No need for extra slashes!

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• Can I connect my WiiU to my iMac and use the iMac is a screen to play games?

  Can I connect my WiiU to my iMac and use the iMac as a screen to play games WiiU on it?

  N °

• Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either.

  Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either.  Can repair you.

  Hello
  Follow these instructions:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let us know if that helps you.
  Brian