creating components
In the components Panel in flash 8, how can you give your new component icon, instead of the box design bit 3 which is automatically the icon by default. Can I also create my own icon component from scratch and put it up in my control panel?These 2 questions are more or less the same thing.
Thank you!
found this:
http://www.Adobe.com/support/Flash/applications/creating_comps/creating_comps06.html
Tags: Adobe Animate
Similar Questions
-
Create components in a loop and how to reference them
Hi all
I have a problem I know not many have met before, but I am a little confused (maybe it's too early )
I want to do two things:
1. I want to run a loop of creating components
for example
Pseudo code
for (i = 0; i < 10, i ++)
{
create a new button called here "Warning" (will get ten buttons called Button0, Button1... Button9)
}
2. I want to then be able to refer to them without knowing their names at compile time
Pseudo code
for (i = 0; i < 10, i ++)
{
Key [i] .width = 100;
}
How can I do this please?
See you soon
Ian
Declare a buttonArray, and push them in the table that each button is created.
for (i = 0; i<10,>10,>
{
create a new button called here "Warning" (will get ten buttons called Button0, Button1... Button9)
var btn:Button = new Button();
buttonArray.push (btn);
.
.
}
while making reference to
for (i = 0; i
{
(buttonArray [i] as button) .width = 100;
}
-
changing or creating components
Hello everyone,
I would really appreciate some help with the following, as I'm fairly new to MultiSim:
I do my homework of lab and I try to place a component amplifier operational 741c. Well, there is a c 741 741 but no. How do I create my own or where should I look? I tried to use the help function, but am not really following their directives. Help, please?
I use "lab manual (MultiSim in italics) to accompany electronic devices and circuit theory.
I think the 'c' is just a part of the packaging system. That is, the LM741CN is a dip 8 pins, where the LM741CH is a package of TO - 5. Search for the part by using a wildcard character (*) before the part number and it will produce a much larger selection of parts. In the version of PowerPro, I counted 57 different components!
You could try just using the Virtual 3 or 5 pins opamp and edit the settings by default such as slew rate, BMU, Cin, etc. to match your datasheet. Unless you were designing a high-frequency or voltage circuit, the SPICE simulation for a standard topology will not generally cause a lot of variation.
To create a template from scratch: http://zone.ni.com/devzone/cda/tut/p/id/3173
-
How to handle complex properties after creating components?
If I create a new object of a ComponentDefinition, I pass a variable as a property to it.
page var = serviceDetailsPage.createObject ();
page.service = servicesDataModel.data (row);
NAV.push (page);
The content of "page.service" is an object and I need to extract data to display on the newly created page.
{Label
text: service ['name']
}
This simple example works fine, but I need to do something more "complex". I tried to use onCreationCompleted, but the event is fired to early because it is trigged until the property is assigned.
onCreationCompleted: {}
Service ["components"] .forEach (function () {}
// ...
});
}
I'm looking for another event that is emitted when the page is displayed to the user (or before!) for access to the property and use that he is happy for the manipulation of the Fryer.
Try this:
var component = Qt.createComponent("MyPage.qml"); var myPage = component.createObject(nav, { "service": servicesDataModel.data(indexPath) }); nav.push(myPage);
-
Handling dynamically created components qml in C++
Hey,.
I dynamically create a qml page by using the following code:
onClicked: { var favPage = favPageDef.createObject(); nav.push(favPage); } attachedObjects: ComponentDefinition { id: favPageDef source: "FavPage.qml" }
I would now like to manipulate the components in this new page qml in c ++. How to access these components?
I was able to access the qml components fairly easily if they were created during the initialization of the application, but of course, this isn't the case.
I discovered what the problem was. I had to do my public AbsractPane in my header file. Then when I created the qml component and calls a function in c ++ it turns out to be a child. Thanks for everyone help well.
-
[Help] Create components dynamically and its id
Hello guys.
I need a help
I know it sounds weird in the title which precedes but I struggled to find a better solution, but can´t understand it.
I searched the internet but couldn t find a solution to my problem.
Here's what I have to do.
I need to create an order of the day. Each cell must accept a new event or remove an existing event
The idea is to show all the 365 days of the year. It s important and clearer to the user.
I ve tried to use the < mx:Repeater > to reproduce a 365 times custom component. He succeeded but I can´t find a way to access these components to change its properties.
As some of them may have an appointment and others not.
< mx:HBox horizontalGap = "0" >
< mx:Repeater id = "monthRepeater" >
< mx:VBox verticalGap = "0" >
< mx:Box id = "mes_box" borderColor = "#000000."
borderStyle = "solid".
borderThickness = "0.5".
width = "80" >
< mx:LinkButton label = "{monthRepeater.currentItem.month}" fontStyle = "normal" fontWeight = "normal" / > "
< / mx:Box >
< mx:VBox verticalGap = "0" >
< mx:Repeater id = "daysRepeater" >
" < visao:CaixaDia id = linktexto =" {daysRepeater.currentItem.day "day_caixaDia"} "labeltexto =" {daysRepeater.currentIndex} "/ >
< / mx:Repeater >
< / mx:VBox >
< / mx:VBox >
< / mx:Repeater >
< / mx:HBox >
Is it possible to use < mx:Repeater > and dynamically create IDS for these components?
Thank you
You can access objects created by a Repeater, as if the id was a table, as in the following example:
If this post answers your question or assistance, please mark it as such.
Greg Lafrance - Flex 2 and 3 certified ACE
www.ChikaraDev.com
Training Flex and Support Services
-
Help with dynamically created components (turning point properties on or off)
Hi all! I'm working on an application with a bunch of delegates of control is created dynamically.
Here's my use case-scenario:
I do a type app GPA calculator, and instead of hard coding a lot of drop-down lists for students select notes, I created a custom component. According to the documentation, each component created dynamically are destroyed until the parent TI auto is destroyed. ControlDelegate seems to be a better option that you can set the flag to false to make the component to go. I created a delegate of control that uses the custom of the list drop-down and added a few aliases to give each a name of object on creation. Now, my problem is that I can't understand the correct item call to the property delegateActive set to false to make the element disappear.
Here is the delegate of the control:
import bb.cascades 1.2 Container { property alias cT : classTitle.text property alias oN : obName.text property alias dN : dDown.objectName property alias cdF : dDown.delegateActive property alias dDown : dDown topPadding: 10.0 bottomPadding: 10.0 ControlDelegate { id: dDown sourceComponent: droDwn delegateActive: true } attachedObjects: [ ComponentDefinition { id: droDwn GpaDD { ddPro { title: cT objectName: oN } } } ] Label { id: classTitle text: "" visible: false } Label { id: obName text: "" visible: false } onTouch: { console.log(dDown.delegateActive + " " + dDown.objectName) } }
on the home page, I have the following code to create a new component:
Page { id: gpaCalc actions: [ ActionItem { id: addDD title: "Add Class" imageSource: "asset:///images/add.png" ActionBar.placement: ActionBarPlacement.OnBar onTriggered: { var nn = ddContainer.count(); var newDD = defDrop.createObject(); newDD.cT = "Class " + [ nn ]; newDD.oN = "_" + nn; newDD.dN = "_" + nn; ddContainer.add(newDD); } }, ActionItem { id: remDD title: "Remove Class" imageSource: "asset:///images/Edit.png" ActionBar.placement: ActionBarPlacement.OnBar onTriggered: { console.log(); } } ] attachedObjects: [ ComponentDefinition { id: defDrop DropDelegate { } } ] Container { /* ImageView { * horizontalAlignment: HorizontalAlignment.Fill * verticalAlignment: VerticalAlignment.Fill * imageSource: "asset:///images/rect_overlay.png" * opacity: 0.65 * }*/ ScrollView { horizontalAlignment: HorizontalAlignment.Fill verticalAlignment: VerticalAlignment.Fill scrollViewProperties { scrollMode: ScrollMode.Vertical } Container { horizontalAlignment: HorizontalAlignment.Fill verticalAlignment: VerticalAlignment.Fill topPadding: 50 leftPadding: 50 rightPadding: 50 id: ddContainer onCreationCompleted: { if (ddContainer.count() < 2) { var nn = ddContainer.count(); var newDD = defDrop.createObject(); newDD.cT = "Class " + [ nn ]; newDD.oN = "_" + nn; newDD.dN = "_" + nn; ddContainer.add(newDD); } } Label { text: "Select Your Grades" textStyle.fontStyle: FontStyle.Normal textStyle.fontWeight: FontWeight.W100 verticalAlignment: VerticalAlignment.Top horizontalAlignment: HorizontalAlignment.Center textStyle.fontSize: FontSize.XXLarge } } accessibility.name: "TODO: Add property content" } } }
How can I find the last delegate of control created to define the delegate tag as wrong?
Any help is appreciated!
You have so much you need to do it this way?
Why not just have a placeholder for * each * drop-down list and turn them on and off individually using delegateActive? -
Align dynamically created components
I use the custom component shown RemoteImageView here to download the images.
How to use the component properly in QML?
I use this code in a loop to create a couple of RemoteImageViews:
var imageView = remoteImageView.createObject(mainContainer); imageView.url = "urltopicture" mainContainer.add(imageView);
The component works fine, but all images are stacked on eachother.
I would like to have a presentation which adds them to the side of the other, ultimately use them as buttons.
Let your mainContainer have a StackLayout with orientation LeftToRight.
What you are asking? I guess that's currently a DockLayout
-
How can I create an application as a component? Where, when is necessary to change some properties I can use the property inspector to change some of them?
See if you can learn how to make the following article...
http://www.Adobe.com/devnet/flash/articles/creating_as3_components.html
-
How to create components of ADF BC as EO 'view with INSTEAD of trigger.
I have a 'vision with INSTEAD OF trigger' on an external schema. is it possible to create the ADF EO on top of this point of view in my local schema?. If possible, then it is possible to insert/update this portal uses standard data ADF controls and module application.? I'm trying to see if it is possible with the standard controls of ADF without calling pl/sql API for insert/update this external table. any ideas are appreciated.
--
Kind regards
Suryahttp://stegemanoracle.WordPress.com/2006/03/15/using-updatable-views-with-ADF/
-
Creating components in non-visible the ViewStack containers
Here's my problem.
I have a ViewStack that is controlled by a TabBar with the first child selected by default. The ViewStack is dynamic and can have nay number of children, who are each a Canvas element. Each child container makes Web services calls in order to retrieve the data displayed in it. I call each WebService in each child in the background, while the user views the first child. While every Web service is running, I display a component ProgressBar on top of the canvas, the canvas-centric.
In the first (visible) child, ProgressBar now, appear in its correct position. However, in other ViewStack children, called Web services and displays of the ProgressBar, but he went way up in the left corner of the canvas, only partially visible.
I think it has something to do with the parent components is used until the child ViewStack canvas is made visible, but I can't find a solution.
Can anyone help?
I have attached the code for my custom ProgressBar component (I removed useless code - i.e. styles).
Thank you.I thought about it.
I added an event handler for the show of events on the component MyCanvas.mxml which updates the display of the component, and then loops through each component child canvas and calls the moveToCenter() function. I have implemented this in my original application, and it works like a charm - all child pages (under each tab) are be preloaded with data until the user clicks on the tab, so that each page is ready for display immediately, or at least will be ongoing and show that it is current, as soon as he clicks on the tab.
Awesome.
Thank you.
-
Jdev 12 c create components programmatically
Hi friends
I add new columns to my treetable using a slider number component, it works fine but I want to add an outputtext with a contextinfo inside
just like that:
<af:outputText value="This is a test" id="ot2"> <f:facet name="context"> <af:contextInfo id="ci1"> <af:showPopupBehavior align="beforeStart" triggerType="contextInfo" popupId="p1"/> </af:contextInfo> </f:facet> </af:outputText>
I'm able to add the outputtext but not the facet contextinfo, showpopupbehavior far, I have this:
the val is the number of columns to add
for(int c = 0; c < val; c++) { RichColumn col = new RichColumn(); col.setHeaderText("Valor "+c); col.setWidth("40"); RichOutputText coldata = new RichOutputText(); coldata.setValue("desc"); /*PERFECT UNTIL HERE*/ FacetTag fc = new FacetTag();//the import is: javax.faces.webapp (I dont know if it is correct) fc.setName("context"); coldata.getChildren().add(fc);//error only allows UIComponents RichContextInfo ci = new RichContextInfo(); ShowPopupBehaviorTag sp = new ShowPopupBehaviorTag(); fc.setParent(sp); // ci.getChildren().add(sp); coldata.getChildren().add(ci); // sp.setAlign(new ValueExpression()); << I dont know how to pass this parameter :( /*END OF FUSTRATION*/ col.getChildren().add(coldata); children.add(col); }
(From line 08-17) I am trying to add the facet as a child of the RichOutputText and RichContextInfo a child this and the ShowPopUpBehavior a child of RichContextInfo
Thank you!
I solved my problem that canceled a pasheEvent another
I solved it by using:
{} public void preRenderVista (ComponentSystemEvent componentSystemEvent)
my code that adds a treetable children,
that way even if the user presses the F5 the tree keeps her children
}
-
Create the screw terminals in Multisim
Hello
I am looking for a Terminal screw in Multisim to use for laying on a wiring diagram. These do not exist or would have to create it? If I create it, someone at - it a simple way to do it (I have never had one to create a component, etc. in Multisim before)?
Thanks for your help.
Mike
Hi Mike,.
What is your version of Multisim? There is a screw in version 13 block in the connectors for group, the TERMINAL_BLOCKS family.
If the component you need isn't available, you can use the Component Wizard (Tools menu) to create a component layout only . Keep in mind that the man you need to create a custom print. For your reference, here are two tutorials:
Creating a custom component of NI Multisim
Creating a custom in NI Ultiboard component
Note that the first tutorial is for creating components simulatable, in your case you don't need a SPICE model for the Terminal screw.
Here's another tip. If you can't find the Terminal screw in Multisim, but you will find a similar component, you can simply change. Just place the similar part, open its Properties window (right click), select the value tab then click on change the component in DB. After the edition of this component, you will need to save your user database.
Hope this helps Mike.
-
Power Supply missing components
Hello
I am a first year electronic engineering student and I would like for obvious reasons, like to get to know and use Multisim.
So I decided to build a power supply on it to test with different loads and gadgets attached to it. Initially, it seemed easy enough until the
I realized that there are some items that I can't find on the database and will have to do it myself. Im not that PRO yet and I only have 6 days left on the trial.
Could someone help me please? Just point the equivalent components on the basis of data of OR
Here's the food I want to build and simulate it on Multsim.
http://www.rason.org/projects/powsupply/powsupply.htm
I've had trouble finding a voltage regulator and some of the Transistors aswell.
Thanks and greetings
Basket
Hello
If you cannot find a component in Multisim, you can always create it using the Component Wizard (Tools menu), this is a basic tutorial:
To create a component simulatable, it need a SPICE model. SPICE models are therefore created by manufacturers, visit the manufacturer's Web site to see if they have the model you need, you can also use a search engine.
For your reference, I have attached a file Multisim with the LM723. You can save it in youruser database, just right-click on the component and select Save to DB component.
I hope this helps, welcome to Multism!
Kind regards
-
Hi all
I am a beginner for Jdeveloper and ADF, I installed Oracle XE and Jdeveloper11g R1 in practice.
I created the application, under the model, project Viewcontroler, created components BC and made mapping.
Now created new page and tried to expose VO (from data control) on the page, immediately it's end with the error message saying "invalid parent for the element af:document element.
I found that the problem with the tag < f: view > isn't there (not defaulted) under the tag root, by go - ogle.
My question is why < f: view > tag is not set by default when creating the .jspx page.
is there any work around to avoid this problem, because every time I can't add this tag manually to the new page?
Thank you
Aurore
You are created JSP, not the a jsf page.
Here's what you'll need:
Maybe you are looking for
-
I'm trying to resize the length of the address bar and the search bar. I could before using a 'line' between them to drag to resize. But now it's not showing. Any ideas?
-
need to install on the machine where IE does not work how?
had to restore a machine running win7 pro 32-bit. IE does not work reinstall firefox can I do a disk or use a flash drive to install on this machine. How can I do?
-
I just downloaded iTunes on my new PC Win 10. First of all, I inserted the backup from the old PC files (iTunes/music libraries, etc.). At the opening of the iTunes I can't find the 40 GB of old files. I have tried edition/preferences/Advanced tab,
-
I bought a new laptop from 15g163nv and not being is not a big fan of win 8 I demoted for Win 7. I'm having a real problem to find all the drivers for this system. Any help would be greatly appreciated. Thank you
-
The release date was June 22, but my phone has not yet improved. So, I have some questions for you all that have the update. How is it? It's a 'real' ICS OS update or Verizon made some changes? The update allows us to remove all the bloatware without