creating custom brush sets

I use mostly the same set of brushes.  How can I configure them so that when I'm up in the Panel of the brush, brushes that I use most appear, instead of a long list of other brushes that I rarely use?

Hello

Maybe: presets for use in Photoshop

Stone

Tags: Photoshop

Similar Questions

  • How to create a custom brush completely opaque?

    I've created a brush custom in CS3 on a windows computer

    7. I would like the form to be completely opaque and scattered. However, for the moment,.

    clones or iterations of the form are slightly transparent. I only have 'Dynamic form' and 'Broadcast' checked this brush.

    I tried selecting and filling of the larger shape that I created with the brush, wait that he would create a solid form, however, it recreates the effect brush to have some opaque, less opaque forms.

    Any help is appreciated, thank you and take care.

    If the brush has been registered with gray pixels you get transparency in these places when you paint with it, simple as that. Or re-create the brush, according to brush in question, use the airbrush from the Options bar, and then click on and hold until the stroke of the brush is completely opaque black.

  • Expansion of the custom brushes creates several objects

    Hi guys,.

    I'm working on an illustration and I used brushes custom, I did to expose the sketch, but I notice that when I develop the paths, each line gets divided into a bunch of objects as shown in the screenshot below.

    It seems to be slowing down the program massively and is also very convenient for storing the line drawings. Is this something to do with the brush settings? Is there a way to solve this problem, so each brushtroke is just an object?

    Thanks for your help!

    Screen Shot 2016-08-21 at 21.49.48.png

    What do you see if you drag your custom brush from the brushes to the artboard Panel and watch mode plotted?

  • Remove blurred overlap custom brush good spacing.

    I'm doing a custom brush I want to use to draw an extended version to create a continuous bar or beam.  I create the brush without anti-aliasing, but when I use it, it adds the aliasing.  Please see image for better understanding.   Spacing = 98 below is the image starts to overlap and creating a dark seam at the joint of the spaced brush.  I want it to be a smooth transition.

    Any help would be greatly appreciated.  -Tim

    test.jpg

    If I understand you correctly, you have defined a predefined brush that looks like this:

    And you want to caress perpendicular to its long side?

    You see a small gap with spacing set to 100% (the entire width of the brush).

    With a spacing of less than 100% of the brush overlaps, the value and more than 100%, you get a gap?  It's exactly what you expect.

    With spacing set to 20%, you would see a stepping

    And 1% deepening disappeared, but so has the gradient

    But if you set the spacing to 1% and reduce the flow of brush down to 5%, you start to get what I think you're after

    You might had feathered the sides of the brush, like this

    That would have given you a chance to get the result with spacing of brush, but it's still pretty tedious. The best I could do was with spacing set to 39%

    Without knowing exactly what you're trying to create, you have to guess, but I suspect that the brush motor may not be the best tool for this.

    Good luck

  • My custom brushes cannot be color Adobe provided as those pre-defined sketch.

    I'm creating my own brushes in Adobe capture of black and white work. When I call them upward in Adobe Sketch I can't apply the color their as the predefined brushes. I tried to save my brushes like B & W and RGB color brushes, but the result is the same. Y at - it a setting or refinement I'm missing out?

    Hi Tim,.

    Sigh... I'm sorry. Okay, I think I understand now. (I hope).

    There are some pre-defined information in this tutorial (step 4 of 9), to create a custom brush from a captured image. Adobe Creative cloud Mobile Apps tutorials, but it seems to me that when you set the color in the sketch, you are not actually save the brush, because as you mentioned, no matter how to record my brush (rgb or b & w), the color I assign in shims of sketches.

    Can you tell me how you save the brush and color to your set of sketching tools?

    Sue.

  • Opacity of custom brush HELP

    Help, please.  Whenever I do a custom brush, it records at 50% opacity.  I must have a setting like this, but I'm not...

    It looks good on my screen when I do the tip of the brush, and then when I save and try to use it, it comes out with a 50% opacity, but the cursor is at 100%

    To get an opaque brush to 100%! You must be black. It uses the lightness of the defined area to create different levels of opacity of your brush.

  • Trying to create a brush for watermark my pictures. Help!

    So, Im trying to create a brush to watermark my photos, but the predefined brush 'set' is not clickable, but it is clickable with any other picture I have try with. What I am doing wrong? can someone help me please? It is quite frustrating.

    not working.jpggrrr.jpg

    To quote the help:

    Using any selection tool, select the area of the image to use as a custom brush. The shape of the brush can be up to 2500 x 2500 pixels pixels in size.

  • Cannot create custom themes - change the wallpaper on the evolution of a theme the wallpaper on the other themes without apparent reason.

    Hi all

    I am trying to create a bunch of different themes, with various wallpapers and color schemes.

    I use right click on desktop-> personalization.

    At first, it seemed possible to create different themes by going to the image I want, right click on 'set as wallpaper', then enter right-click-on - desktop-> personalization, right click on the theme "non-registered" now watch the wallpapers, I just chose, then selecting "save us." This appeared to save the theme under personalization-> my themes.

    I got up to 5 different themes under "My themes" by doing this.

    But now, #5 theme, it works all of a sudden is no longer like that.

    Now, when the value a new picture as a wallpaper, it does not change only "Unsaved theme" for new wallpaper, it changes at the same time theme #5 to this wallpaper as well. When I save the new theme theme #6 and then go to change theme #5 to the wallpaper I had originally, it replaces theme #6 as well. It is impossible to change a wallpaper without changing both of them.

    I don't understand why it ehaves in this way. Why can't save just a theme and then not have to worry that it will be crushed randomly if I do something else with a completely different theme?

    Th information in this link can help you.
    http://www.maketecheasier.com/create-custom-Windows-8-themes/

  • How to create a brush that changes brightness on pen pressure?

    I want to have a brush that changes brightness on pen pressure.

    I have essentially the same problem as this person 7 years ago: Re: draw under dark work (I'm even using the same tablet )

    There is a way to define a brush opacity on pen pressure, the problem is that it works well in a continuous race. If I start another shot, he adds the darkness at the previous race. Not what I want. The color should be only rgb, rgba not.

    Then, there is a way to define a ' background/forground color' brush on pressure of the pen, which is good for the cool effects and works pretty much exactly what I want if I set the background color of white, except that the light replaced darkness within a single shot. That means when I let go of the Tablet, a white dot appears where I let go.

    In this thread, he writes did he use to do this: "merge layers > layer > Set current to darken layer > Exchange swatches > fill > Exchange color chart." I noticed that in photoshop today cc 2015, when you make a new layer, there is an option to set the blending mode and fill with a neutral color for the blend mode. I don't know how to make the actions, so it would be nice if someone tells me how to do this action.

    To get into the Action:

    Window-> Actions

    Create a new set, and then create a new Action and start recording the steps

  • Can I use arrowheads and figures to be the custom shape set come with photoshop in graphic design that will be put on Youtube?

    Can I use arrowheads and be in numbers the the custom shape set come with photoshop in graphic design that will be put on Youtube or social networking?

    Hi albert xu,.

    Greetings!

    Yes, you can as this is why photoshop is intended.

    You can use and create designs and post that publicly.

    Concerning

    Jitendra

  • Essential support for creating custom reports on "Openmanage" using "Essentials" command line Interface

    Good afternoon

    Please can you help to create custom reports in "Essential Openmanage" using "Essentials" command line Interface

    The default reports are not feasible.

    Hi there Oswaldo and thank you for the question.

    Currently, OME 1.3 doesn't have a custom report generator.  I don't think that the CLI help as it is mainly used to set up from the beaches of discovery and things like that.

    There is a REST API that _may_ allow to return by the data of the database of the MEO program.  The REST API guide is in the section of the Documentation on the Dell TechCenter for OME page.

    www.delltechcenter.com/ome.

    Thank you

    Rob

  • Create custom workflows in virtual machine

    Hello

    I use a native workflow 'Create custom virtual machine', but it does not deploy a machine of the ntemplate.

    He built a raw with personalised VM. Some other workflow to deploy the VM from the model but without customization.

    Is it possible to include an option to model the workflow "Create custom virtual machine"?

    Thanks in advance

    Use several workflow and actions as building blocks to build one that meets your needs... For example, suppose you want to deploy a Windows VM with customization...

    Create a new workflow called "deploy Windows VMS"

    Inside of this workflow, add the following workflow:

    Clone, windows with a single NETWORK card and credential<-- this="" will="" clone="" a="" vm="" windows="" vm="" from="" template,="" perform="" sysprep="" (change="" unique="" id,="" guest="" os="" name,="" set="" administrator="" password,="" join="" domain="" if="" specified,="" and="" set="" ip="" address="" as="">

    Take the exit (a new virtual machine) this workflow and send it to each flow of work following:

    • Change of RAM (Workflow)
    • Add the disk (Workflows)
    • changeVMvCPU (Action)

    should look a bit like this:

    Once you have linked all together correctly and all attachments, you'll probably want to adjust the presentation so that the CPU/Mem are in the correct section, as well as additional info on the disk... Here's a quick example:

    This process could be replicated, but using a Linux workflow specific to meet the same needs deployment clone custom Linux virtual machines.

  • could not complete the order of custom shape set due to the program error

    I use the tool pen to draw a shape and select to create a custom shape. I use the path: edit - define a custom shape = 'impossible to finish the order of custom shape set due to the program error.

    The error message is displayed when I click on the button set.

    Well, it was pretty much a mistake in the way I created. I guess that because I deleted the path and created a new and each works well. So, if this happens just you try to delete the path and create a new form. Hope my experience helps someone. X]

  • Can work with custom brushes was seen on another computer?

    OK, here is my situation, I have a project that I used a few custom brushes.

    I'll save on USB.

    One then show to a friend on her ON another computer.

    The strokes custom work will appear on its HAVE on another computer?

    Or I have to develop traits? Or save custom brushes?

    Thank you

    P.S. I DON'T ask if I can use these brushes custom on another computer, I ask if work that I created on a computer with custom brushes can be seen on another computer, just to clarify.

    Brushes incorporate composite like any other type of object data when the PDF compatibility option is active. The appearance will remain intact. It may simply be impossible to change things.

    Mylenium

  • Pse5 LOADING A BRUSH SET

    created a new brush set.

    It appears in the list of predefined load Manager.

    When I click on load - nothing.

    When I list as assorted brushes brush sets, basic brushes etc, he's not here

    Yes, we rebooted pse5 - even restarted the computer.

    Help!

    Thank you all

    UPDATE *.

    I found where he saved the new together and copied to the places where all the others.

    now PSE5 considers appropriate.

    How any other set will again be saved in the right place?

    Thank you all

    You are using vista or windows 7 and the 32 or 64 bit?

    In the preset manager when you save the game (save set in the preset Manager dialog box), go to

    C:\Program Files (x 86) \Adobe\Photoshop elements 5.0\Presets\Brushes

    and see if you can save.

    If you get the message that you can't, and he suggests somewhere like the documents folder, you can change the destination to your desktop, then move

    the brush on the right directory.

    You can probably also, right click on the shortcut of elements 5 photoshop and choose Run as administrator and you should be able to save the brush sets to

    C:\Program Files (x 86) \Adobe\Photoshop elements 5.0\Presets\Brushes, but it's a pain, so I would just save the whole somewhere and then move it to the folder brushes in pse 5.

Maybe you are looking for

  • How to release the hearing?

    I signed up for 3 months of trial and don't know how or what to do? Just ask amount? How to buy or download? The free trial version, what exactly?

  • Acer switch Alpha 12 - Horrible battery life

    I got the new Acer for a few weeks now and am totally disappointed with the battery life.  Pushing I can get maximum about 2½ hours before the battery to recharge.  This is without doing anything difficult for Acer.  Brightness is 25% and I lost abou

  • No sound after installing new video driver.

    Original title: video driver installation breaks sound... When I downloaded a new Autodesk program had to install a new video driver.  Once that was completed my sound no longer works.  Thanks in advance for your suggestions. D. R.

  • 12 c - BOX WHEN ODI IS in maps

    HelloI just would like to know is possible to do the following select statement with ODI 12 c mapping in order to load the results into a target table?SELECTTable1.my_field,Table1.ipart,Table1.ISEC,CASES WHERE NOT EXISTS (SELECT 1FROM TABLE2JOIN IN-H

  • Como dejar pay the uso una application quota?

    Como puedo cancel los pagos los planes President con Adobe? That no sea the option of devolver do pagos, but avoid that generen