creating custom c.war images, similar to i.war.  -context does not

Similar Questions

• Dawn of War 2 does not work with DirectX10

  Dawn of War 2 does not currently work with directx 10. I checked the settings file and it says it works with dx9 and when I try to change it it says that it cannot find a compatible graphics card.

  my graphics card is the GTX 260, so he must run DX10 very well, and I ran it for other games. im just trying to activate ultra options since theyre available only on DX10. I have vista 32 bit.
  I have the latest patch which should make ultra 64 bits available to users

  -very well, understood what I had to do. I put essence.ini to run DirectX 10

  (not sure this helped)
  and ran the command-line directly into the charger of the steam.
  now it's working.

• 'Create a Windows 7 or a later version installation disc' does not appear as an option to select tasks

  I have a MacBook Pro (15 inch, late 2011) race El Capitan.  I just installed a new hard drive and am trying to install Windows 7 using Boot Camp Assistant.  In the window select tasks 'Create a later version or Windows 7 installation disk' does NOT appear as an option.  How to create the Setup disk?

  

  I use https://support.apple.com/en-us/HT205016 to get step by step instructions

  I have already created the disc image of the DVD install disk Windows following the instructions of https://support.apple.com/en-us/HT203909

  When I open Boot Camp Assistant I'm unable to create a Windows 7 installation disc

• Dreamweaver CC 2015.3 interactive images - Hotspots do drag and drop does not work

  Dear all,

  I use Dreamweaver CC 2015.3 and try to use the Image Map option. I'm not using it in Liveveiw so there must be another problem.

  I have inserted a picture and give MapId image2. After that, I tried to drag and drop all three circle, polygon, and rectangle. Nothing happened.

  No map tag is packed. Nothing happens. What is the reason?

  Thank you

  Amir

  mamirs wrote:

  ... I have inserted a picture and give MapId image2.

  As much I know "MapId" is not an attribute of html for creating / using the clickable images.

  An image map using an attribute called 'well' in the tag which must match the attribute "name" of the

  To use the image map tools...

  1. place an image into your page (the tag should be used, image maps do not work on css-background images)
  2 single-left-click on the image in Design view to select it (a black box appears). If you see a blue border and a tab, when you click the image, you again Live View Editor and click on the triangle next to the Code, Split and buttons direct to change design

  3 left - click the shape you want in the Properties window to select the tool

  4. go to the image, click and drag (to a circle or square) or click on several points (for the polygon tool) to create your interactive image tag
  5. change the name of the card on the card Properties window

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.

• BitmapField does not display an image bitmap. In fact, it does not display anything at all...

  My problem is simple and fast. I am probably just a stupid mistake, but the BitmapField component does nothing and does not display the bitmap image. I first tried to display a Bitmap using its setBitmap (bitmap Bitmap) method, which did not work. Then I tried to use it's method setBitmap to the Builder, who did nothing at all no more. Then I tried to use setImage using an image encoded if nothing happened again. Yes, both the encoded image and methods of Bitmap.fromBitmap that make new Bitmap objects and EncodedImage POINTENT to real images in my project folder. So what I am doing wrong, I forget to call a method in needed or what? I use Eclipse with the plugin and I use the Blackberry 9550 Simulator.

  First of all, your use setSpace is incorrect. What you are doing here are to define a space around the bitmap image - in this case, the space is bigger than most of the screens, which will ensure that your bitmap image is not actually on the screen. See the description of the API in the javadocs.

  Second, you SHOULD check the return of getBitmapResource(). If it returns NULL, then the resource was not available. What you're doing here can hide a problem.

• Cannot create a Microsoft account (already exists) and cannot use it (does not exist or is not available)

  Hello
  I need help - I installed Windows 8 Pro and I create a Microsoft account using my personal address (not a Windows Live) everything was fine and then I had a problem with the approval of the account and I made the decision to reinstall everything.

  When installing Windows 8 Pro back, I'm not able to create a Microsoft account because it says already exist and when I try to connect using it does not exist or not available, I used a local account and it works very well and also a new account from Microsoft and it works fine.

  The problem is that I am not able to use my official address as a Microsoft Account

  Could you please help me.

  Thank you
  Chicago

  What is the name of the mental illness?

  Duh!

  An account will be considered as inactive if you don't sign not for 270 days or within the first 10 days after registering. The account will be deleted if it has been inactive for 365 days. When the account is deleted, the user name is immediately available for registration.

  Try this status Checker-

  Status Checker

  When you went through the previously mentioned account recovery process link, do you have provided an alternate email address and you will be notified that you would like to be contacted?

  Try to re-create the account as a new account, if it is still available.

  Windows 8: use a Local instead of Microsoft Live account account to connect

  http://www.tech-recipes.com/Rx/22437/Windows-8-use-local-account-instead-Microsoft-account-login/

  How do to return to the account of Local Microsoft Account, sign in on Windows 8

  http://www.thewindowsclub.com/switch-local-account-log-Live-ID-Log-Windows-8

• Right click on the image & menu is missing/option options does not work

  God knows how many years ago, I've upgraded to Windows 8.1, didn't like it, refreshed/restored Windows 8 and when I right click on an image missing some options are worn and the preview option does not work (Im guessing it is the top lack of option)

  

  Hello

  You have all the applications installed on the computer to open the specified file type?

  I recommend you to set the default values for the program and check if the problem persists.

  Check out these links for assistance:

  Choose the apps Windows uses by default

  http://Windows.Microsoft.com/en-in/Windows-8/choose-Programs-Windows-uses-default

  Program access and computer by default

  http://Windows.Microsoft.com/en-in/Windows-8/set-program-access-computer-defaults

  You can also check if the problem persists in clean boot mode.

  Also, try to run a SFC scan-

  http://support.Microsoft.com/kb/929833

  Refer to:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  to reset the computer to start as usual after a repair.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• a dynamic image in the plugin model generator does not work

  Hi all
  The documentation says:
  Direct insertion
  Insert the jpg, gif or png image directly into your model.
  +... This works of course.
  Reference URL
  1 insert a dummy image in your model.
  2. in the image of Microsoft Word Format dialog box, select the Web tab enter the following syntax in the alternative text box to reference the URL of the image:
  URL: {'location http://image'}
  For example, enter: url: {'http://www.oracle.com/images/ora_log.gif'}
  +... This also works when I encode a url in the form url: {"http://www.google.com.tr/images/firefox/mobiledownload.png"} +.
  
  The element of the XML file reference
  1 insert a dummy image in your model.
  2. in the image of Microsoft Word Format dialog box, select the Web tab enter the following syntax in the alternative text box to reference the URL of the image:
  URL: {IMAGE_LOCATION}
  where IMAGE_LOCATION represents an element of your XML file that contains the full URL of the image.
  +... This, however, does not work. +
  
  I use Apex' report query tool and my query is like
  Select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION of... (a single results set for my model)
  the xml data is generated by an IMAGE_LOCATION tag. I have load to plug-in model of word. The Url appears correctly in the report if I get a simple ordinary field.
  But when he is at the image-> Internet-> alt as a url text format: {IMAGE_LOCATION} no image displayed.
  I need to keep this simple design for a user procedure simple word could design a report using the just of the plugin model generator. I do not wish to explore the region of xsl - fo... yet.
  Could you tell me why I can't get this url: {IMAGE_LOCATION} to work?
  Concerning
  
  PS: My BI version: 10.1.3.4.1
  
  Published by: oeren June 8, 2011 12:28 AM

  Try to replace IMAGE_LOCATION .//IMAGE_LOCATION
  It worked for me.
  Kind regards
  Joshua

• MTI created with height 3, length 25 and no fake film, does not

  Hello
  
  I created the Message text entrance with height 3 length 25 and no fake Wrap, its does not work in read-only Mode. so that its display of the text box to read only wrong.
  We also send it back the text in read-only Mode.
  Please let me know, how we can solve this problem.
  
  Any help or advice will be highly appreciated.
  
  Thank you
  Pascaline

  Got your boyfriend requirement :)

  Seems you have confused with approaches which I referred. Let me explain crearly:

  A first:

  Now, did you SPEL on 'Read only' property of the messageTextInput element. I want you to try putting the SPEL on "Disabled" messageTextInput item property.

  A second:

  Now, you have messageTextInput. I want you to create an element of messageStyledText guest, a view instance, attribute of the view, height 3, length 25 and no false Wrap. Shoe SPEL 'Rendering' property of messageTextInput and messageStyledText elements. So that you will only display an item/field at a time.

  -Anand

• Images on the yahoo home page does not load/display in firefox

  Everything suddenly when the yahoo homepage support any of the images on the page are visible. This has never been a problem in the past. I tried the previously recommended fixes, such as clear, clear cookies, caching, updating firefox, etc. I even tried to delete the Chamber of combustion and redownloaded/reinstalled but still have the problem.

  What antivirus security software do you have?

  In this thread, Avast has been identified as the cause of a similar problem.

  • [/ questions/1082096 it miss me photos on Yahoo.com home page and do not know why, any help?]

• (similar to the PivotTable) matrix does not

  Hello
  
  I'm using after query to create a matrix (similar to a PivotTable) with categories through horizontal and vertical... everything works fine except that the TOTAL amount is displayed only when all cells horizontally has a value
  
  
  with got_aggregates as
  (
  Select
  LEAD_SOURCE,
  SALES_MANAGER,
  ACCOUNT_CONSULTANT,
  Max ((DECODE (SALES_STAGE, 'ALWAYS CONTACT', opportunities, NULL)
  ) STILL_CONTACTING,.
  Max ((DECODE (SALES_STAGE, 'SPLEEN', opportunities, NULL)
  DUD)),
  Max ((DECODE (SALES_STAGE, 'AUCUN COURANT OPP', opportunités, NULL)))
  ) NO_CURR_OPP,.
  Max ((DECODE (SALES_STAGE, 'CALL RETURN LATER DATE', opportunities, NULL)
  ) CB_LATER_DT,.
  Max ((DECODE (SALES_STAGE, 'MEETING BOOKED', opportunities, NULL)
  ) MEETING_BOOKED,.
  Max ((DECODE (SALES_STAGE, 'OCCASION IN EOM', opportunités, NULL)))
  ) OPP_IN_EOM,.
  Max ((DECODE (SALES_STAGE, "L'AUTRE", opportunités, NULL)))
  )),
  Max ((DECODE (SALES_STAGE, cm, opportunities, NULL)
  TBD)
  Of
  (
  
  Select
  LEAD_SOURCE,
  SALES_MANAGER,
  ACCOUNT_CONSULTANT,
  SALES_STAGE,
  Sum (OPP) opportunities
  
  Of
  (
  Select
  LEAD_SOURCE,
  SALES_MANAGER,
  ACCOUNT_CONSULTANT,
  (CASE
  WHEN SALES_STAGE like '%' |' ALWAYS CONTACT ' |' %' CAN ALWAYS "CONTACT".
  WHEN SALES_STAGE like '%' |' DUD' | '%' THEN 'SPLEEN '.
  WHEN SALES_STAGE like '%' |' NO COURSE OPP' | '%' THEN 'NO CURRENT PPO '.
  WHEN SALES_STAGE like '%' |' CALL-BACK' | '%' THEN ' CALL-BACK DATE FIXED.
  WHEN SALES_STAGE like '%' |' MEETING ' |' %' THEN 'RESERVED SESSION.
  WHEN SALES_STAGE like '%' |' EOM OPPORTUNITY ' | '%' THEN 'EOM OPPORTUNITY'
  WHEN SALES_STAGE like '%' |' QUALIFIED OPPORTUNITY ' |' %' THEN 'EOM OPPORTUNITY'
  WHEN SALES_STAGE like '%' |' ASSIGNED TO A DIFFERENT REP'. '%' THEN 'SPLEEN '.
  WHEN SALES_STAGE = 'OTHER' THEN 'OTHERS '.
  WHEN SALES_STAGE = 'OTHER' THEN 'OTHERS '.
  OF OTHER SALES_STAGE
  END)
  SALES_STAGE,
  Count (PROSPECT_NAME) as Opp
  from TABLE_A
  Group
  LEAD_SOURCE,
  SALES_MANAGER,
  ACCOUNT_CONSULTANT,
  SALES_STAGE
  )
  Group
  LEAD_SOURCE,
  SALES_MANAGER,
  ACCOUNT_CONSULTANT,
  SALES_STAGE
  )
  Group
  LEAD_SOURCE,
  SALES_MANAGER,
  ACCOUNT_CONSULTANT
  order by
  LEAD_SOURCE,
  SALES_MANAGER,
  ACCOUNT_CONSULTANT
  )
  Select a.*, STILL_CONTACTING + RATE + NO_CURR_OPP + CB_LATER_DT + MEETING_BOOKED + OPP_IN_EOM + OTHERS + TBD as TOTAL
  Of
  got_aggregates one
  order by
  LEAD_SOURCE,
  SALES_MANAGER,
  ACCOUNT_CONSULTANT

  Hello

  Do not forget that NULL + x is set to NULL.
  Using NVL (or COALESCE) to process the missing as 0 values when you add it. Do something like this in the main request:

  select  a.*
  ,      NVL (still_contacting, 0)
        + NVL (dud,            0)
        + NVL (no_curr_opp,      0)
        + NVL (cb_later_dt,      0)
        + NVL (meeting_booked,   0)
        + NVL (opp_in_eom,       0)
        + NVL (other,            0)
        + NVL (tbd,            0)     AS total
  ...
  

• Why is there some images that I click in iphoto does not open?

  When I click on some photos in two albums in my iphoto library, they turn into images of exclamation point. IM assuming that this means there is some sort of mistake, but I don't know why.

  This means that iPhoto has lost the link to the original file.

  Have you been clean recently? Used all the apps that 'own' or 'tune up' your Mac?

  What version of iPhoto? What version of the operating system? You have a back up?

• Outbreak of similar PCI-6251 reference edge does not work with two channels?

  I use this card PCI-6251 to acquire data from two channles of entry. I need to use reference similar edge trigger. the trigger for the chan signal 1 and acquire data from chan 1 and 2 chan. However, the error is that this card can't take two channels with similar trigger edge reference. Please check if it's the PCI-6251 limilation. If so, can you suggest any other card can do this work? The normal extent can trigger from one channel and acquire data from many other channels.

  Thank you

  Liming

  
  

• Star Wars Empire at war gold does not work on Windows Vista

  I bought star wars empire at war gold and when pack I insert on the tray and close it, it didn't read on my hp pavilion a6120n pc. After some time, nothing happened. Why?

  The other question...?

  As I said - if you can not read at all on a single computer and can be downloaded to another computer - the obvious suspect is usually the problem.

  Third question about all this...

  Can you read other CD/DVD in the drive that cannot read this particular CD/DVD?
  (It cannot be 100% dead - just not that good of a player OR go dead.)