creating image

Similar Questions

• IMAQ CREATE, image type setting

  Hello

  I'll put my f031b Pro Guppy camera pixel format.

  It seems too long I put attributes with property nodes: pixelformat as Mono 16, no matter what I put in the "IMAQ create"--->"image type", I still get output 16-bit gray scale.

  Is this correct?  What can control when I change the image type to "IMAQ Create"?

  best,

  Wen

  If the image is passed directly to the Image to get VI of IMAQdx, the type is unimportant since it is converted by the driver when it fills with data. Only the border size is relevant.

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

  Hi all

  I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

  When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

  After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

  The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

  Technical specifications

  First Pro CC 2015.4 (latest version)

  OS: Windows 10 Pro (Version 1511)

  CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

  RAM: 16 GB

  GPU: EVGA GTX 1070 (latest drivers)

  SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

  Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

  Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

  Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

  Type: MPEG Movie (.mp4)

  Image size: 3840 x 2160

  Frame rate: 29.97

  Format of the pixels: 1.0

  It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

  Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

  Any help?

  It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

  For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

  The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

• "Unable to create image buffer" error when rendering

  I'm trying to render it again a project previously made in the new version of first.   My machine is 16 GB of RAM, processor Intel i5, Nvidia 960 graphics card.   I've made this before.   But in this first version, RAM usage increases until all the 16 GB is full, make it fails with the message "Unable to create image buffer."   I also get the message that my computer is low on memory and a second 'unknown error' first.    This message in the event Log:

  Windows correctly diagnosed a State of lack of virtual memory.

  The following programs use the most virtual memory: Adobe Premiere Pro.exe (12704) consumed 61467721728 bytes, natspeak.exe (10428) consumed bytes 549675008 and n360.exe (2404) consumed bytes 235859968.

  I deleted / restore my preference in first twice, without modification.   I also see this behavior in Adobe Media Encoder.   Anyone else seen this?

  I was the sequence of the deletion and recreation, and the problem seems to have disappeared.  I tried to re-create the bug, so I can post more information, but no luck so far.   All I know for sure is that it was REALLY boring.

• I want to create images as Holger Lipman. What program and how I would do this. I learned to look at Processing.js and OpenProcessing. What is the equivalent to Adobe.

  I want to create images as Holger Lipman. What program and how I would do this. I learned to look at Processing.js and OpenProcessing. What is the equivalent to Adobe.

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Hello

  Not really sure, please try to post the request in the community specific https://forums.adobe.com/welcome

  Kind regards

  Sheena

• How to create images that react to the size of the browser (and not to the device)?

  How to create images that react to the size of the browser (and not to the device)?

  Hello

  Please try this widget.

  http://widgets-musethemes.BusinessCatalyst.com/tb032.html

  Concerning

  Vivek

• What settings to use in Photoshop to create images for 42 "LCD TV

  Hello world

  I hope you can help me please:

  I want to do a video advertising in store for a store selling at retail.  I use Adobe Photoshop to create images and create the movie using Windows Live Movie Maker.  The film runs on a 42 "Hannspree LCD TV.

  Here are some images of the TV, I need film on:

  

  

  

  Question

  Should what settings I use in Photoshop for this TV?

  For example, I choose file > New > Preset: Film and video > size:... .but what size?

  Is there a certain pixel size, aspect, resolution etc, I need to know to LCD TVs or design in general?

  Here's a picture where I need help:

  

  I noticed that Windows Live Movie Maker has an option of image format, such as:

  

  But I still want to know what settings to use in Photoshop.

  Sorry for the question long and if the solution is real obvious - I'm a newbie!

  Thanks in advance,

  bazraam

  Hi Bazraam

  This is the setting I would use. I normally would raise the resolution to 300 just in case I want to print the image, but if not 72 will work fine

  

• Creating image of report as work demo

  Dear Pakars
  
  Creating image of report as demo work?
  
  Thank you
  Imansyah

  Hello

  Are you asking how to include images in a report? If so, take a look at the documentation to support declarative blob.

  http://www.Oracle.com/technology/OBE/Apex/apex31nf/apex31blob.htm

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• Disk utility cannot create image

  I am trying to create a new disk image encrypted to store sensitive files I get only when I need to use them/it.

  I can't get the disk utility to create a new image.  I use "File" > "New Image" > "Blank Image...". "If I leave all the settings in the pop missed up I get the error:"the operation failed with the State-5000.

  Ideally, I want to create an image that I will eventually burn on DVD; If I change the settings:

  "image Format" = ' CD/DVD Master '.

  "size:" = "4.6 GB (DVD-R DVD - RAM).

  "encryption:" = "128-bit AES encryption (recommended).

  I get the error: "the operation failed with the State 13.

  Anyone know what these errors?

  The volume I am creating the image is using safe.

  As far as I know,-5000 is the OS X value for a permissions access error. Check the location where you want to store your image is writable, and also there is enough free space. Try to create a smaller image to see if the free space is the problem. It might be interesting to try and 'first aid' on the right if the target disk.

  C.

• create image disk without unused space

  Hello

  I don't find any response to this question except what makes a blank image with utility app and drag-and - drop the files but I can't imagine there is not a better solution to create a disk without unused space image. I turn with SD card a lot and need to backup these discs without unused space. Is there a solution?

  Thank you if you have an idea

  Samuel

  If you create a disc from a device image, it won't take as much space being * used * on this unit, not the total capacity of the card.

  In disk utility, file-> new Image-> < device name > Image

• Creating image using disk utility

  Hi - I am trying to create an image file of and CD Audo to later burn multiple copies (I own the rights on this CD).

  The process I use is to load the CD in the drive SuperDrive, open disk utility and select the disk in the sidebar (curiously, the drive itself is not there, just the disk). Can I go to file = > new Image == > Audio CD Image. Select a destination, Format: unalterable, encryption: no) and click Save.

  He done much work slowly disk reading and writing of the file (Audio CD.dmg). However, if I try to open the file when it has finished, it said "no mountable file system" and if I burn it to a CD - r disc resulting almost blown my speakers with the sound. To check, I tried with a commercial CD as well - same result.

  I'm doing something wrong here. He doesn't know he used to work in previous versions of the utility.

  System: Mac Pro early 2008 OS X Superdrive Pioneer (original Apple) El Capitan 10.11.5.

  Hello

  There is a little powerful 3rd party app called 'Burn '. Older applications, it's works well in El Capitan as well. If you decide to download and install, you will need to go to preferences > Security and privacy to allow him permission to run for the first time. After that, he will not ask you again. It is simple and easy. Create .iso and burn. Create and burn data/audio CDs and copy CDs as well. There are a few 3rd party applications which are worthy of Mac, and this one is. The name of it, is once again, 'Burn '.

  Bravo!

• Newly created images will be displayed in Firefox 8 for Mac. Same images appear in other browsers. Why?

  1. the new images are uploaded, but will not appear in Firefox on my Mac with OS 10.6.8 8. (Does not appear in other browsers, for example, Chrome, and Opera and appears on 8 Firefox for PC). In addition, other images of the display of the page.

  2. I have cleared the cache, cookies, etc., in recent history and restart applications and computers.

  3. I tried to create GIF, JPG and PNG, but none present on the page in Firefox on my Mac. I can see the image incriminated in other browsers such as Chrome on the same computer and Firefox on PC. Offending pages are in HTML and PHP: http://www.brookfieldcivic.org/advertisers.php and http://www.brookfieldcivic.org/advertising_freedom_montessori.html

  Image links: http://www.brookfieldcivic.org/images/advertisers/freedom.png and http://www.brookfieldcivic.org/images/advertisers/Freedom_Montessori_bizcard.jpg

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• Saellite U920T - cannot create image Refresh

  Hello

  I have a U920T with 8.1 x 64 and a history of BSOD.
  For the second time, I had to use my backup image and re - install everything.

  8.1 for Windows has the ability to create a custom refresh image.
  But when I run the recimg.exe statement, I have a with "entry point not found" error with migcore.dll.

  Does anyone know how to create this image of refreshment.
  From my research on the internet, it seems that there is a problem with Toshiba laptops...

  Thank you
  Loïc

  Hello

  > But when I run the recimg.exe statement, I have a with "entry point not found" error with migcore.dll.

  I read that this migcore.dll error if you try to restore the image of Win Win 8.1 8 running system
  I read in the Microsoft forum that function recovery image which appeared in the Win 8 system has been changed by the upgrade to 8.1 Win.

  If in case you try to restore the laptop to a point of time in the beginning, I recommend you to use the image created in the system Win 8.1

• Unable to creat image of recovery for C720

  I can't create a USB for my Chromebook C720 recovery image. If I try the C720 itself, it hangs at the stage of download.

  I tried to use the Linux Google's script, but discovered that there is no recovery for a "PEPPY C6A-V7A-I7S" image - the device hardware ID on recovery thr screen.

  Internet search has been fruitless so far. A that someone managed to create a recovery for the C720 USB?

  Thank you.

  Hi YukiNagato,

  You can try it on another computer? I use a Windows PC but on a Chrome browser, you install the Chromebook recovery utility and here you can get your chromebook out of the list or you can finish the model and it will download and create a recovery disk. This drive (USB or flash) will be available on the recovery disk, personal data will get formatted.

  If you want to make sure that you have the right model, you can connect the machine by pressing ESC + refresh + Power to bring you to a white screen with an exclamation point. The model will be listed below.

  Here is the official Google steps on how to do this process: https://support.google.com/chromebook/answer/1080595

  Thank you
  Cory

• Create Image hard drive dead

  Okay, so dying was a bit hyperbolic.  2 problems:

  1. I found some bad sectors on my hard drive that the check disk window does not reach the difficulty (even after the execution of SEVERAL times).  Any ideas on alternatives to the disk of the window check?
  2. My hard drive is under warranty and I want to swap out.  But Windows 7 will not let me create a backup with a defective sector image.  I don't want to reinstall Windows and all my programs again. Ideas on how to create an image that I can use to run windows on a hard disk of expenses without just to save data and starting from scratch?
  Thanks in advance.

  Check out the Web site of the manufacturer of the drive for tools that can repair bad sectors.

  This cloning program claims to be able to manage disks failed http://www.miray.de/products/sat.hdclone.html . A free version is available. If bad sectors contained important data, it is not necessarily a good idea.