Creating ingest Preset does not...

Similar Questions

• Presets does not work; 10.5.8; OfficeJet Pro 8000n

  Hello all-

  I have been using a Business Inkjet 1100d for many years without difficulty.  I created several gifts that worked perfectly.  Currently 10.5.8 System.

  I just bought a new Officejet Pro 8000n and installed all the new software from the CD provided.  I have conducted an audit of the updates and there is not.  The new 2nd printer appear in the familiar print as well as the old printer dialog box.  Each printer can be selected and will work.  However the presets do not work.

  I created new presets with the new selected printer.  I tested the print configuration I saved the preset with and it prints properly (plain paper, rough paper, 2 faces, 8 1/2 x 11 letter, etc., auto source, etc...)  However when I use the preset created for printing it does not work.

  When I change to the new printer to a job, changes in paper size to 8 1/2 x 11 borderless, 2 sides print is disabled, paper is on HP Advanced Photo paper, quality is set to Normal and Source is set to 1 Board.  Selection of one of the presets, for the old 1100D or those newly created for the 8000n have no effect and do not change any of these settings.  I have to manually change each setting whenever I print.

  If I leave the printer selected as the (default) 1100D old presets work correctly (but not the other).  I tried to delete and re-create the new preset several times without success.

  Most of the posts on this topic, I found in looking here seem to relate to the system 10.6, 10.5. not, and so far I have found no obvious answer.  I can't take the time to go through all the settings and change each one for each print job manually.  85% + of my print jobs are project, 2-sided, paper tray 2.

  I've seen a number of messages about problems with the presets does not not in research, so I guess I'm not alone.  Someone at - it any other suggestions?  Thank you.

  Symptom: when you try to use a "Preset" either he does not when you press print or preset will not apply at all.

  Cause: some settings in the print dialog box are specific Application (YOU), in other words, when you call printing, parameters are passed by the application to the print dialog.  What parameters are ALSO may be different with different applications.  For example, HP says that in Safari are WHERE: matching colors, manipulation of the paper, cover Page and Planner.

  In applications that have a 'layout' menu, Type of paper, Orientation, and scale are ACE and NOT stored in the presets (or default rollover of the application). They are passed to the dialog box print from 'Page layout' of the application.

  If no settings in your conflict set with any of the AS specifications that have been put in the dialog print, your willingness to preset NOT work.  For example, if your Type of paper of PHOTO, but your preset specifies the project, or 2-sided printing.

  1-step workaround: the good news is that AS the parameters are modifiable.  Go to your dialog box print and change the setting that conflicts with your preset. For example, replace Type of Photo paper to US letter. Now, when you apply your preset, it will work correctly.

  Solution: most of the conflicts can be addressed in the layout of the application menu. Go to the menu and change the incompatible parameter, for example, Type of paper.  (You may need to save the new configuration to the default settings Page.  If you do not want these new Page Setup default settings for this application, you must create a new preset with specifications that are compatible with existing by default the Page Setup application)

  Exception to the Solution: many (but not all) applications Apple have an anomaly (in the system 10.5, not sure about 10.4) where they pass all parameters AS well.   Examples of affected Apple applications include Safari, TextEdit and preview.  Apple applications that are not affected by this issue include both disk and network utility, QuickTime Player, editor of Script and Automator.  (It may be little 3rd party applications affected as well).  A complete list of applications assigned and unassigned (found on my system) is listed in the message 2 above.

  Apple's technical support attributes this to the fact that OS 10.5 is not 100% compatible with the new printers HP (software).  (10.6 is 100% compatible they say).  Apple suggested that Safari and other applications Apple passing the wrong Type of the dialog box's default paper print do due to the partial incompatibility of the system 10.5 with model new HP printer software.  They had no work around to suggest.

  Bottom line, for Safari, TextEdit, and other problem Apple apps I listed in my applications list (see above), my solution of 1-step workaround apparently is the only solution available.  When you upgrade to Snow Leopard, you should no longer have the problem.  But, if you're on a Power PC Mac and impossible to move beyond Leopard, you're stuck with my 1-step solution.

  1-step workaround above works with all the applications involved however.

• Create a shortcut on the desktop the icon comes back to a 'globe' for any shortcut, I create. It does not cover the actual icon as shown in the url or web page. Any ideas?

  Create a shortcut on the desktop the icon comes back to a 'globe' for any shortcut, I create. It does not cover the actual icon as shown in the url or web page. Any ideas?

  Hi Ronnie,.

  I see that you can not create a shortcut on the desktop. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what operating system is installed on the computer?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5 is the issue limited to the creation of shortcuts on the desktop?

  6. How do you try to create a shortcut on the desktop?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Thank you.

• new album created in iPhoto does not appear in iTunes when I'm syncing my phone?

  I created a new photo album in iPhoto, and this album does not appear in iTunes under the photos when I'm syncing my phone.  an album has 836 photos also but in iTunes when I sync the same album shows that there are only 736 photos... Why are the new photos not added?

  Thank you

  This can happen if the iPod Photo Cache in your iPhoto library is corrupted.

  What version of iPhoto do you have?

  Try to remove the iPod Photo Cache in your iPhoto library, such as described here - see the link: iTunes: understand the folder iPod Photo Cache

  And try to synchronize again.

• New logon user - new user account is created, but it does not work

  I have Windows Vista Home Basic Edition.  My computer has suddenly developed a little problem on user account and the guest account.  Every time a new user is created in the user accounts in the Control Panel, or the guest account has been enabled, users cannot open a session.  Any attempt to these users or comments of logon is greeted with "service user profile Service does not have the logon - user profile cannot be loaded."  When the new user is removed, and is used to save all the files, there is no file to be saved.

  The problem is not a corrupt profile or SID which should be deleted or renamed and so on.  The problem is that when I create a new user through user accounts in the Control Panel, no profile or anything else seems to be created with it. The computer shows absolutely nothing more than the new user in the title of the user accounts and on the logon screen.  The new user is not in the settings under the my computer properties. There is no document (desktop and so on) for the new user in Windows Explorer; There is no SID for the new user.  It seems that there is no profile or anything for the new user.  System Restore could not help, because the incident that wiped out all system restore points also annihilated profiles. There is no '.bak' file in the registry for all users.

  I have the same problem with the guest account.  There is nothing in the browser to indicate the existence of a guest profile. It doesn't seem to be a SID for the customer.  The guest account cannot be used because any attempt to logon as a guest is greeted with "service user profile Service does not have the logon - user profile cannot be loaded."

  Yes, please is there someone who can help us solve the problem of not being able to effectively create new users and have a guest account. Thank you.

  Hello temp8127,

  Thank you for your answer!
   
  You can do a 'repair Start Up' but will have installation disc.  If you perform a new installation, then Yes you will need to copy your personal files on a device.  Please let us know status.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx#ex
  NoteIf your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Create shortcut folders does not work all the time?

  I needed to create multiple folders shortcut for a project that needs them often, and I just couldn't. Still, I remember in the past and one of them actually have on my desktop for my photos.

  It appeared that in folder trees if I right click on the folder you want, "create shortcut" Option did not show upward! the same with the folders on my desktop would be! If rich of this conclusion, I copied my "recalcitrant" folder on the desktop (had to cut short the copy because it was great!), but got a copy of it on my desk (with only what he had time can be fully copied!). Then right clicked on it and the shortcut option appeared! I re routed the path to the original on my D drive folder and it works well.
  Obviously something does not work as it should and I don't have to do all this, so I hope someone knows the answer to this problem. Maybe a stupid option that must be checked on somewhere...

  I don't know if this is your question or not because it should either work, or not at all. The first fix, here is a zip file which will certainly not hurt to try. It's my answer for those who have reported lately that the new folder option did not work in Win7 canned.

  Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible. Here are two patches.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

• In ACR presets does not not after upgrade

  After I updated my ECA to 6.7, my gifts (VSCO and Mastin Lab) does not work on my RAW files.  The error says "selected parameters use 2012 process that is not supported by this version of Camera RAW.  I have to go again to 7.1 to my presets to work?

  Yes, this means that you need to update.

  CS6 is available as a stand-alone, so you would not go CC if you are not ready to.

• Adobe prelude CC - Ingest dialog does not appear after a double-tap to ingest

  I'm having a problem with Adobe prelude, version 2015.0, 4.0.0 (Build 138), which is the most recent version at the moment. I use Windows 7 Professional. My problem is this: when I click on "Double click to interfere", I never see ingest the dialog box appear. I have multiple monitors, but I do not see the dialog box on any of these screens and I don't see anywhere on the taskbar. At this point, if I try to click anywhere in the application, it gives me a sound of ding as if the dialog box was opened. Then I have to use the Task Manager to close the application. Restart the PC does not help. I even uninstalled Creative Director Cloud prelude, rebooted, and then reinstalled the application, and the problem persists. Prelude used to work just fine for me until about a week ago. Help, please. Thank you!

  Hi Maverick,

  As mentioned by you in other post, it's resolved by pressing Windows key + left or Windows Key + right to restore the location of a window of the application to its default value.

  Thanks to accentuate the problem and the solution.

  Mayjain

• Creating .exe cloud does not open when you download.

  As the title says, I can download the file but it does not open. In addition, when you attempt to open in Internet Explorer, it says that the file is not found or it can be moved.

  Any help?

  Andrew

  We can call you and help you resolve it.

  Otherwise, you can create a new user account and verify that.

  Create a user account - Windows help

  Thank you

  Varun

• Adobe AIR - creates disk image does not open

  Hi, I am trying to create a dmg file and does not open the image file. I work on a Mac and it's not the first time that I do this.

  The error message when I open the disk image is "Suite of disk image can not be opened" and the reason "not recognized".

  It's really weird, because it used to work and now for some reason any ceased. First I thought that it could be, because I compiled with the new SDK 4.0, but then I tested it with older SDK as 3.5, 3.8 and 3.9 and the problem persists. Old projects that worked fine also are no more building disk images.

  My system was 10.8 and I thought that the problem could disappear if I install the new Mavs, but after upgrading the problem is still there.

  Repair disk permissions and the file did not help also.

  Anyone has any idea what it could be? I'm really at the end of my knowledge.

  Thank you very much

  Solano

  OK people, finally found the problem. I use FDT and for some reason, FDT stopped to add the indicator -target native when compiling a native installer. I think that certain day FDT introduced this bug.

• Pages created with TPL does not scroll

  I recently acquired a contract to upgrade a site built in CS2 with tables for something that is HTML 4.01 compliant. I use CS5 and have updated the design of the TPL, but now my pages does not scroll with the new model. I tried using the tag of overflow in several ways and locations in the worksheet DWT and style itself, but to no avail. I also created new pages of this model, and they either scroll. I clearly missed something, someone has ideas about what it is? Someone needs to code snippets?

  Thank you, Kevin

  A couple of things.  First, you can ignore the Javascript error in the validation of DW.  It's the old code, designed to work with older browsers, so it is not always validate.  Table tag error I would still recommend fixation as well as the style tag that appears after the body.

  Next to your scrolling problem, your content is in a fixed position container.  Fixed positioning means that the container will be in the same place and is not really grow or shrink.  He's right there.  It is not flow with the rest of your document and I see no reason to keep it fixed.  And on top of that, it is inside a table cell that makes even less sense.  Delete and see if that solves your problem.

• create dvd Windows does not burn music and slideshow

  Windows 7... When I add the photos and music I can listen to samples and it is great. But after I burned the dvd and go to replay theres no music. the first time I did it, he put some music with it, but I changed some of the music and he burns the original stuff I had on this subject, not the new. Help, please

  I started all over from scratch, and it does not burn any music now.

  Hi tcfs,.

  Welcome to the Microsoft community. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. what application did you use to burn the pictures and music?

  4 you get an error when you are unable to burn music on the disc?

  I suggest you to refer to these articles and check if they help.

  Burning disc for Windows 7 tips: http://windows.microsoft.com/en-US/windows7/Disc-burning-tips-for-Windows-7

  Burn a CD or DVD in Windows Media Center: http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-in-Windows-Media-Center

  Windows Media Player, frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• When the files of ingestion, prelude does not see an entire tree.

  When the files of ingestion, prelude is not going deep enough into my directory tree.

  It seems to stop at the 5th level of the root. I have structures down 8 levels on some directories.

  First Pro sees OK because it uses the Windows Explorer interface, while the prelude has its own file tree interface.

  I have set up a situation of test, and Prelude didn't hurt to follow along the line... eight files down, was always fine...

  

  The only thing you could check... notice the "consider as ' box top-right? That should be "list of files" to continue. In file earlier, I got a clip CinemaDNG, and he wanted to change to "As DNG" here. And would not go further down in the directory as this file until I changed the setting for this folder. It is because for a number of file formats off camera, regarding the CinemaDNG and some of the Arri, RED and other formats, the images are more than one type DPX where each image is a separate file, as written on the disc, so a file is actually a logged clip. So, "show you" prelude where the image folders, and she knows to show those clips, not as a bunch of still images.

  Then you have some of these formats as shown on this "as:" in the drop-down list in these records? If so, there is your problem. You may need to change your storage scheme.

  Neil

• Creating cloud Login Does not stay Login

  Since the CC updated last week, I can't login on my Mac.  It will connect, sync my files, and then after 5-10 minutes, it will automatically disconnect me.  I delete file opm.db of the library several times and does not help.  I have not updated the CC on my first Mac and there are not any problems.

  Hi Victoria,.

  I recommend you to contact our team of chat/phone support because they can remote into your machine and help.

  Please click on the following link: Contact Customer Care

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options indicated below in the capture to get support of screen options:

  

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Creating cloud App does not seem to be updated itself

  I am running Mac OS El Capitan on my rMBP. Such, 26 January 2016, my creative cloud app version is 3.4.1.181 which, according to the release of these notes are released on 26/11/2015. Release notes for the desktop Adobe Creative Cloud application

  • There has been some updates since then, for example 3.4.2.187 on 11/12/2015
  • Office Manager has not get up to date, despite her "always refresh app" checked, and I'm the only administrator account on this computer.
  • Director of office notified me on other updates app for the PS, InDesign etc.

  
  

  Is there some updates it downloads not, or if I have a problem how can I fix?

  Hello

  Ideally creative cloud update should be installed itself. But for some reason if it does not update itself you can uninstall the creative cloud desktop application and install again.

  Uninstall Help https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  Install it using Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial