creating table of partition with null values

Similar Questions

• Remove data with null value

  Hello

  I'm using Oracle 11 g. I have a table with an id of 3, node, the value column. Combination of the column id and node, that must be taken account for deletion on the registers.

  Here, I need to delete lines with the NULL value in the value column. If for a combination of id and node with non-null values, then I need to delete rows with a null value for this combination.

  If the combination of id, node is not null value then this records should not delete.

  Below table, I need to remove the second row, for which is a value not zero VOICE CAL '10' is there, so I need to delete the row with null values. (VOICE, CAL, NULL)

  Network, FL, there is no value is non-null then I should NOT delete this line.

  This table is to have 100 s of this association, we can delete data in a single delete query?

  Or how I can delete rows with nulls for this combination.

  Tab1

  VALUE OF THE NŒUD ID

  VOICE CAL 10
  VOICE CAL NULL
  NETWORK NULL FL

  Thank you

  Hello

  oradba11 wrote:

  Hello

  I'm using Oracle 11 g. I have a table with an id of 3, node, the value column. Combination of the column id and node, that must be taken account for deletion on the registers.

  Here, I need to delete lines with the NULL value in the value column. If for a combination of id and node with non-null values, then I need to delete rows with a null value for this combination.

  If the combination of id, node is not null value then this records should not delete.

  Below table, I need to remove the second row, for which is a value not zero VOICE CAL '10' is there, so I need to delete the row with null values. (VOICE, CAL, NULL)

  Network, FL, there is no value is non-null then I should NOT delete this line.

  This table is to have 100 s of this association, we can delete data in a single delete query?

  Or how I can delete rows with nulls for this combination.

  Tab1

  VALUE OF THE NŒUD ID

  VOICE CAL 10
  VOICE CAL NULL
  NETWORK NULL FL

  Thank you

  You can do this in a single DELETE statement (it is not a request), using an EXISTS or IN the subquery.  For example:

  REMOVE table_x m

  WHERE the value IS NULL

  AND THERE ARE)

  SELECT 0

  FROM table_x s

  WHERE s.id = m.id

  AND s.node = m.node

  AND s.value IS NOT NULL

  )

  ;

  If you would care to post CREATE TABLE and INSERT instructions for the sample data, and then I could test it.

• How to display the line empty as a line with null values

  Hi all
  
  Pls advise me if it is possible to use a single query statement to display
  Empty row (i.e. not a single return line) as a line with null values.
  
  For example,.
  
  Select the names of names_mst whose name = "sgasfgs".
  
  Result:
  Names of
  =====
  < null >

  Hello
  If you desire to join external to double, as shown below, you still get at least a line of production

  SELECT  nm.names
  FROM            dual
  LEFT OUTER JOIN names_mst   nm  ON nm.name='sgasfgs';
  

• NPE for rows with null values in the table of the adv

  I created the table adv, 2 columns, equipped with two text fields. Initially the col2 is empty,
  say that the structure is as follows:

                col1          col2
  Hdr         Question    Answer
  row1       abc           zxc
  row2       pdd           null (user doesnt enter anything)
  row3       zxc            lkj
  
  APPLYBUTTON

  When the user clicks on apply button I want to update these values in the table.
  
  I don't know how to do that, but that's what I'm trying to do. Please guide me the right way if its wrong.
  
  in LICS, I took the APPLYBUTTON action, got all lines of the object corresponding to the view, consulted with everyrow and I'm checking if there are values in the fields in the table, if the value zero, are simply print null. (we would not update on this line). . I could get o the part update, due to null pointer exception
  I get on the row line null pointer exception [1].getAttribute("Answer") for row2, it prints the value of row1 however.
  
  Here is the code I wrote:
  Set of rows from the rowset = (RowSet) vo.getRowSet ();
  Rank rank [] = vo.getAllRowsInRange ();
  System.out.println ("row.length" + row.length);
  for (int i = 0; i < row.length; i ++) {}
  String question = row.getAttribute("Question").toString ();
  String response = row [i].getAttribute("Answer").toString ();
  If (question! = null & &!("".)) Equals (question. Trim()))
  {
  System.out.println ("Question line" + i + "-" + question);
  }
  on the other
  {
  System.out.println ("Question line" + i + "is null");
  }
  
  If (response! = null & &!("".)) Equals (Answer.Trim ()))
  {
  System.out.println ("Response line" + i + "-" + response);
  }
  on the other
  {
  System.out.println ("Response line" + i + "is null");
  }
  
  Why the NPE survey code, I'm checking for null value and you want to print the value null in the logfile... I can not to getAttribute() on the null field, why can not just give me null in the variable I'm assigning to?
  
  You can guide me what approach to take, if it is not correct.
  I must examine DataDictionary and collect data there?
  Thanks in advance.

  Hello

  handle the exception of null on these two statements like this pointer

  String question = "";
  String response = "";

  Try
  {
  question = row.getAttribute("Question").toString ();
  }
  catch (NullPointerException e)
  {
  question = "";
  }

  Try
  {
  answer = row.getAttribute("Answer").toString ();
  }
  catch (NullPointerException e)
  {
  response = "";
  }

  Si ( !("". Equals (question. Trim()))
  {
  System.out.println ("Question line" + i + "-" + question);
  }
  on the other
  {
  System.out.println ("Question line" + i + "is null");
  }

  Si ( !("". Equals (Answer.Trim ()))
  {
  System.out.println ("Response line" + i + "-" + response);
  }
  on the other
  {
  System.out.println ("Response line" + i + "is null");
  }

  Thank you
  Gerard

• Add filter slot table form to show the lines with null values

  Hello
  
  I have a tabular presentation where we need to add a filter with two values (selection list) so that if one of the columns in a table (column1) is zero, then I need to display all records where column1 is null.
  
  I was wondering how do I put this in the Source of tabular forms where condition. This filter has only two values,
  
  All the
  NULL for the error
  
  So when the user selects all, then all the records in the table are shown
  If the user selects 'Value Null in error', while the records where Column1 is null will be shown
  
  For example
  

   column1        column2
                         A
                         B
        1               C
        3               D
   

  If the user selects, then
  
  all four files will show up. Else, only the first and the second will be returned.
  
  Thank you

  Hi, Ryan.

  Try a static LOV like this

  STATIC2:;,--- All ---;--- All ---
  

  and a Where clause, like this

  where column1 is null or :p1_filter like '%%'
  

  Jeff

• Update statement using unique table with null values

  Hi all
  
  I want to update the table example table contain columns of c1.c2, c3 as below data
  
  tab1: -.
  ------------------------
  C1 c2 c3
  1 2 null
  3 null null
  4 5 null
  6 null null
  -----------------------------------------
  
  now, I want to update each value null to bellows value c3 c3
  for example, the data as below
  
  C1 c2 c3
  1 2 3
  4 5 6
  
  How can using the update statement update it please help me
  
  Thanks in advance
  Bala

  So you can never be sure of your order by...

  SQL> create table tab1 as
    2  (
    3  select 1 c1, 2 c2,  null c3 from dual union all
    4  select null, null, 3 from dual union all
    5  select 4 ,5, null from dual union all
    6  select null, null ,6 from dual
    7  );
  
  Table created.
  
  SQL>
  SQL> select *
    2    from tab1
    3  /
  
          C1         C2         C3
  ---------- ---------- ----------
           1          2
                                 3
           4          5
                                 6
  
  SQL>
  SQL> merge into tab1 t
    2  using (select rowid rid
    3              , c1
    4              , c2
    5              , c3
    6              , lead (c3) over (order by rowid) ld
    7           from tab1
    8        ) v
    9   on (t.rowid = v.rid)
   10   when matched
   11   then update set c3 = ld
   12   delete where c3 is null
   13  ;
  
  4 rows merged.
  
  SQL>
  SQL>
  SQL> select *
    2    from tab1
    3  ;
  
          C1         C2         C3
  ---------- ---------- ----------
           1          2          3
           4          5          6
  
  SQL> 
  

  @Peter: PTR, het is niet koud. Het zonnetje schijnt ;)
  for everyone: no, it's not cold. The Sun is shining.

• Alter the State of Session? -Apex form publishes text with null value

  Recently I discovered a problem with our Apex facility in which all selected as source for a text field value will eventually be displayed as a null value in the database.
  We run APEX version 3.2 in an Oracle 10.2.0.4 database using Oracle HTTP Server from 10 g companion disc.
  
  At first glance, everything seems to work as expected; I created a simple table called "oracle_sr" with 2 columns, as both not null:
  
  SQL > desc capacity.oracle_sr
  Name Null? Type
  ORACLE_SR_ID NOT NULL NUMBER
  TIMESTAMP NOT NULL DATE
  
  In APEX, the form wizard has been used to create a form on this table.
  After execution of the pages and you enter a value for the timestamp field, I can create folders without problem.
  
  The question arises when I choose a source for the timestamp field value.
  All the source options causes the same error (including a static value) so I'll focus on the SQL query to the source as:
  
  Select sysdate double;
  
  This should replace the date system in the area of text timestamp when the page is executed.
  As expected, the value appears in the text box, but when I submit the form to create the folder I get the error:
  
  ORA-01400: cannot insert NULL into ('ABILITY'. "" "" ORACLE_SR '. "" TIMESTAMP")
  
  I have worked with APEX for quite awhile and have successfully used this technique in many applications but just to begin to see this error in recent days. What's particularly odd about this message is by default postings "not null" created by the form wizard sees timestamp class as having a value. Session state information included below reports a value yet the database is to launch the ORA-01400.
  
  Someone has a similar problem? I have spent a good amount of time to try looking for this problem but can't seem to find any similar messages.
  
  I have included the release of my test page, debugging from what I see, it seems to be a value associated with the filed timestamp:
  
  0.00: a C C E P t: request = "CRΘER."
  0.00: metadata: go look up the definition and application shortcuts
  0.00: NLS: wwv_flow.g_flow_language_derived_from = FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language = en - us
  0.00: alter session set nls_language = "AMERICAN."
  0.00: alter session set nls_territory = 'AMERICA '.
  0.00: NLS: CSV charset = WE8MSWIN1252
  0.00:... "NLS: decimal separator Set =". »
  0.00:... NLS: Set NLS Group separator = ",".
  0.00:... NLS: Date Format Set = "DD-MON-RR.
  0.01:... Setting session time_zone in-06: 00
  0.01: setting NLS_DATE_FORMAT application date format: DD-MON-RR
  0.01:... NLS: Date Format Set = "DD-MON-RR.
  0.01: fetch database session state
  0.01:... Check the owner of the 2303701116904676 session
  0.01: setting NLS_DATE_FORMAT application date format: DD-MON-RR
  0.02:... NLS: Date Format Set = "DD-MON-RR.
  0.02:... Check for expiration of the session:
  0.02:... Metadata: Page Fetch, calculation, process and branch
  0.02: session: extract information from session header
  0.02:... Metadata: Retrieve the attributes of the page for application 109, page 50
  0.02:... Validate page affinity point.
  0.02:... Check off the items hidden_protected.
  0.03:... Check authorization security systems
  0.03: session state: Save elements of form and p_arg_values
  0.03: *... Session state: you save newValue of the object "P50_ORACLE_SR_ID" = "" "escape_on_input ="N"* 0.03: *..." " Session state: you save the object "P50_TIMESTAMP" = newValue ' 26 May 09 "" escape_on_input = "N" * ""»
  0.03:... Session state: Save "P0_CURRENT_PERSONNEL_ID" - registration of same value: "1."
  0.03:... Session state: Save "P0_OFFSET" - registration of same value: "0".
  0.03:... Session state: Save "P0_ACTIVE_WEEK" - registration of same value: "24 May 09".
  0.03: point of treatment: ON_SUBMIT_BEFORE_COMPUTATION
  0.03: branch point: BEFORE_COMPUTATION
  0.03: point of calculation: AFTER_SUBMIT
  0.03: tabs: make the connection for the tab queries
  0.03: branch point: BEFORE_VALIDATION
  0.03: perform validations:
  0.03:... Point Not Null Validation: P50_TIMESTAMP
  0.04: branch point: BEFORE_PROCESSING
  0.04: point of treatment: AFTER_SUBMIT
  0.04:... Process 'PK get': PLSQL (AFTER_SUBMIT) declare function get_pk return varchar2 is begin C1 in (select ORACLE_SR_SEQ.nextval double next_val) loop return c1.next_val; end loop; end; Start: P50_ORACLE_SR_ID: = get_pk; end;
  0.04:... * session state: saved point new value "P50_ORACLE_SR_ID" = "6."
  0.04:... Treat "Line of ORACLE_SR process": DML_PROCESS_ROW (AFTER_SUBMIT) #OWNER #:ORACLE_SR:P50_ORACLE_SR_ID:ORACLE_SR_ID | IUD
  0.04: see the error page...
  0.04: execute rollback...
  
  ORA-01400: cannot insert NULL into ('ABILITY'. "" "" ORACLE_SR '. "" TIMESTAMP")
  
  Cannot process the row in the ORACLE_SR table.
  Back by demand.
  
  Any thoughts would be appreciated.
  
  Thank you
  
  Justin.

  If you have changed the Source Type of an element of database column to something else, so he cannot participate in the automated line choreography Fetch/automatic line processing (DML). You must leave the Type of Source, as it was and change the default value of the element fill when the ARF process retrieves a null value for the column.

  Scott

• Create Table in Access with AutoIncrement field

  Hello

  I like to create a new table in an access database.

  The problem is to create an ID field with autoincrement. I can add "not null" and "primary key" for the field, but not the option "autoincrement".

  You have a solution to this problem?

  Thank you

  Marcus

  Access autoincrement

  It seems that if the Autoincrement does not work, you can try Counter as specification of column.

  /Y

• display of the output cursor empty with null values

  I have the below procedure of the State where he is shown the output to the client.

  The requirement now is if the select statement does not return a value any with the input given then output parameter should see NULL values instead of no line at all.

  
  One method is to get the number of the select query that is written in "open p_out for." And then write the condition as if count is 0 then null other show data.

  Could you please suggest me any other alternative to this.

  Create or replace procedure test (p_empno in number , p_out out sys_refcursor) is
  
  begin
   open p_out for 
   select e.ename, d.deptname, s.sal , p.addr , v.age
    from emp e ,dept d, sal s, padress p , age v
   where e.deptno = d.deptno and d.deptno = s.deptno
   s.sal_id = p.sal_id and p.id = v.id
  and e.empno = p_empno ;
  
   
  exception when others then
   open p_out for 
   select null , null,null,null,null from dual;
  
   
  end test.
  

  Thank you

  Maybe NOT TESTED!

  Select x.ename, x.deptname, x.sal, x.addr, x.age

  of the double

  left outer join

  (select e.ename, d.deptname, s.sal, p.addr, v.age

  from emp e,.

  d Dept,

  SAL s,

  padress p,

  v of the age

  where e.deptno = d.deptno

  and d.deptno = s.deptno

  and s.sal_id = p.sal_id

  and p.id = v.id

  and e.empno = p_empno

  ) x

  1 = 1

  Concerning

  Etbin

  Select x.*

  of the double

  left outer join

  (select *)

  WCP

  where ename = 'ETBIN.

  ) x

  1 = 1

  EMPNO	ENAME	JOB	MGR	HIREDATE	SAL	COMM	DEPTNO
  -	-	-	-	-	-	-	-

• Throw the records with null values columns

  Hi all.
  
  Anyone know how to dispose of records containing null column values?
  
  In the target table, I have the set Null option? with "N"... then the process sqlldr load some records. I need to load all of this without the records with null column values. by result, if the field X is null then load the file.
  
  Kind regards.
  
  Published by: ASzo on 05/06/2013 12:37
  
  Published by: ASzo on 05/06/2013 12:38
  
  Published by: ASzo on 05/06/2013 12:42

  load data
  INFILE...
  in the table...
  When x! = ''
  fields completed by...
  (x ...)

• How to deal with NULL values in regexp_substr?

  DECLARE
     TYPE t_rec IS TABLE OF VARCHAR2(200);
  
  /* case 1 */
     l_input    varchar2(100) := '28/09/2009 00:00:00|AFRISB|FC|773|7|17|512|76|60|U|';
  /* case 2 */
  --   l_input    VARCHAR2(100) := '06/10/2009 00:00:00|PDIERR|PS|999|0|1|0|0||U|';
     l_bars     PLS_INTEGER;
     l_fields   PLS_INTEGER;
     l_rec      t_rec := t_rec();
  BEGIN
     l_bars     := regexp_count(l_input, '\|', 1, 'i');
     l_fields   := l_bars + 1;
  
     FOR fld IN 1 .. l_fields
     LOOP
        l_rec.EXTEND();
  
        l_rec(fld)   := REGEXP_SUBSTR(l_input, '[^|]+', 1, fld);
        dbms_output.put_line('Fld ' || fld || ': ' || l_rec(fld));
     END LOOP;
  END;
  

  The above code is that I break a string of pipe delimited into individual elements.

  Looking at the case 1 in the code, the output displays each field correctly. However in case 2, the 9th field is null (nothing between the two tubes) so the regexp_substr 19 online is assigning the 'U' in the box 10 as a field 9.

  What should I do to get the line 19 to correctly assign a NULL value to field 9?

  Information about the version of the database are:

  BANNER

  --------------------------------------------------------------------------------

  12 c Oracle database Release 12.1.0.1.0 - 64 bit Production
  PL/SQL Release 12.1.0.1.0 - Production
  CORE Production 12.1.0.1.0
  AMT for 64-bit Windows: Version 12.1.0.1.0 - Production

  NLSRTL Version 12.1.0.1.0 - Production

  Thank you

  Steve

  Hello

  If you want to use regexes, so instead of

  REGEXP_SUBSTR (l_input, "[^ |]") +', 1, fld);

  use

  REGEXP_SUBSTR (l_input

  , '([^|] *)(\|| $)'

  -P

  fld

  NULL

  -P

  );

  . The 6th argument to REGEXP_SUBSTR is a new feature of Oracle 11.1.  It's kind of a back reference. Normally, REGEXP_SUBSTR returns the substring that matches the pattern in the 2nd argument.  If the 6th argument is 1, however, REGEXP_SUBSTR returns only the part of the pattern between the 1st on the left '(' et sa correspondance)."

• REGEXP_SUBSTR for the list delimited by commas with null values

  Hello
  
  I have a column that stores a list of values comma-delimited. Some of these values in the list may be null. I'm having some trouble trying to extract the values using the REGEXP_SUBSTR function when null values are present. Here are two things I've tried:

  SELECT
     REGEXP_SUBSTR (val, '[^,]*', 1, 1) pos1
    ,REGEXP_SUBSTR (val, '[^,]*', 1, 2) pos2
    ,REGEXP_SUBSTR (val, '[^,]*', 1, 3) pos3
    ,REGEXP_SUBSTR (val, '[^,]*', 1, 4) pos4
    ,REGEXP_SUBSTR (val, '[^,]*', 1, 5) pos5
  FROM (SELECT 'AAA,BBB,,DDD,,FFF' val FROM dual);
  
  POS P POS P P
  --- - --- - -
  AAA   BBB

  SELECT
     REGEXP_SUBSTR (val, '[^,]+', 1, 1) pos1
    ,REGEXP_SUBSTR (val, '[^,]+', 1, 2) pos2
    ,REGEXP_SUBSTR (val, '[^,]+', 1, 3) pos3
    ,REGEXP_SUBSTR (val, '[^,]+', 1, 4) pos4
    ,REGEXP_SUBSTR (val, '[^,]+', 1, 5) pos5
  FROM (SELECT 'AAA,BBB,,DDD,,FFF' val FROM dual);
  
  POS POS POS POS P
  --- --- --- --- -
  AAA BBB DDD FFF

  As you can see that neither calls work correctly. Anyone know how to change the regular expression pattern to handle null values? I tried various other models but could not get anyone to work in all cases.
  
  Thank you
  
  Martin
  -----
  http://www.ClariFit.com
  http://www.TalkApex.com

  Hi, Martin,.

  That's what you want:

  SELECT
     RTRIM (REGEXP_SUBSTR (val, '[^,]*,', 1, 1), ',') pos1
    ,RTRIM (REGEXP_SUBSTR (val, '[^,]*,', 1, 2), ',') pos2
    ,RTRIM (REGEXP_SUBSTR (val, '[^,]*,', 1, 3), ',') pos3
    ,RTRIM (REGEXP_SUBSTR (val, '[^,]*,', 1, 4), ',') pos4
    ,RTRIM (REGEXP_SUBSTR (val || ','
                        , '[^,]*,', 1, 5), ',') pos5
  FROM (SELECT 'AAA,BBB,,DDD,,FFF' val FROM dual);
  

  The query above works in Oracle 10 or 11, but in Oracle 11, you can also do it with only REGEXP_SUBSTR, without using RTRIM:

  SELECT
     REGEXP_SUBSTR (val, '([^,]*),|$', 1, 1, NULL, 1) pos1
    ,REGEXP_SUBSTR (val, '([^,]*),|$', 1, 2, NULL, 1) pos2
    ,REGEXP_SUBSTR (val, '([^,]*),|$', 1, 3, NULL, 1) pos3
    ,REGEXP_SUBSTR (val, '([^,]*),|$', 1, 4, NULL, 1) pos4
    ,REGEXP_SUBSTR (val, '([^,]*),|$', 1, 5, NULL, 1) pos5
  FROM (SELECT 'AAA,BBB,,DDD,,FFF' val FROM dual);
  

  The problem with your first request was that he was looking for sub channels of 0 or more non-virgules. There was as a substring. consisting of 3 characters starting at position 1, he returned "AAA", as expected. Then there was an another substring, the 0 characters, starting at position 4, so it returned NULL. Then, there was a substring of 3 characters starting at position 5, so he returned 'BBB '.

  The problem with your 2nd request was that he was looking for 1 or more non-virgules. 'DDD' is the 3rd this substring.

  Published by: Frank Kulash, on February 16, 2012 11:36
  Added Oracle 11 example

• ORDER BY a column with NULL values only

  Hello
  
  The order of column has all null values for the results of my query set.
  
  Ex:
  
  Select a, b, c from table1 where type = 'type1' and ID = "id1" order by column1
  
  In the above query, "column1" contains nulls for 'type1 '. The order of the records in the result set is different for different ID values if the values of a, b and c are always the same.
  What is happening in the 10g database.
  
  I have also observed that the order of the records for the same query conforms in the 9i database.
  
  (1) is the difference due to the difference in versions of database?
  (2) is there a way to get the order even records independently entry ID?
  (3) I cannot in the same order in 10 g DB too as the order in 9i DB?
  
  Thank you.

  Hello

  Madhuri says:
  Hello

  The order of column has all null values for the results of my query set.

  Ex:

  Select a, b, c from table1 where type = 'type1' and ID = "id1" order by column1

  In the above query, "column1" contains nulls for 'type1 '. The order of the records in the result set is different for different ID values if the values of a, b and c are always the same.
  What is happening in the 10g database.

  I have also observed that the order of the records for the same query conforms in the 9i database.

  If two or more rows have the same values (or NULL) for each ORDER BY expressions, then you may not be sure what order they will be. The system is free to do whatever he finds convenient. What the system identifies Dresser can vary depending on many factors, including the version, the size of the table, the conditions in the WHERE clause, there is a GROUP BY clause, or not... In all cases, it is not something that you can depend on. If you want the output in a certain order, to specify the order in the ORDER BY clause.

  (1) is the difference due to the difference in versions of database?

  Could be. In all versions, Oracle said that you cannot count on the order being compatible, except if the ORDER BY clause, it is consistent.

  (2) is there a way to get the order even records independently entry ID?

  Add more expressions at the end of the ORDER BY clause, as tie-breakers.
  For example:

  ORDER BY  column1
  ,         a
  ,         b
  ,         c
  

  If table1 is really a table (not a view), you can add a ROWID.
  In most cases, you can ORDER BY expressions that are not in the SELECT clause. So if you have a primary key, you can usually ORDER BY it, even if you don't see it.

  (3) I cannot in the same order in 10 g DB too as the order in 9i DB?

  Of course, ORDER BY works the same in all versions. If you have an ORDER BY clause to unambiguously, the output will be exactly the same order in any version.
  Remember that the absence of ORDER BY has no effect in all versions. If you have an ORDER BY of ambiguous clause, you can not count on the coming out in a particular order in any version.

• SQL Loader with null values

  Dear friends,
  
  I have comma-delimited .dat files. Here is the example.
  

  abc, xyz, 456
  ase, asd, 890

  I have no problem loading using sql loader under normal circumstances.
  
  When a null value somewhere, for example:
  

  abc, , 456
  ase, asd, 890

  or
  

  , xyz, 456
  ase, asd, 890

  I could not load them.
  
  How can I fix this error?
  
  Any suggestion?
  
  I am using Oracle 10 g R2 running on Windows Server 2003
  
  That's how I connect
  

  $sqlldr userid=userid/password control=d:\load\controlfile\table_name.ctl log=D:\load\log\tablename.log resumable = true errors=0

  It is a way the contorl file looks like
  

  LOAD DATA INFILE 'D:\load\dat\tablename.dat' BADFILE 'D:\load\bad\tablename.bad' DISCARDFILE 'D:\load\dat\discard\tablename.dsc' 
  INSERT INTO TABLE tablename FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS( col1, col2, col3)
  {code}
  
  How can I handle this?
  
  Please advice.
  
  Thanks in advance.
  
  Nith
  
  Edited by: user645399 on Jun 14, 2010 1:38 PM
  
  Edited by: user645399 on Jun 14, 2010 1:38 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                

  Try column_name '' in the control file.

• Calculation of the sum of a column on a XML editor RTF with NULL values

  Hello
  
  I have a problem to get the sum of a column in XML editor RTF, if one of the lines has a null value.
  
  say, I have 4 columns and values
  
  CASES1:
  NULL, NULL, 4, NULL
  Sum, I expect is: 4
  
  CASE2:
  NULL, NULL, NULL, NULL
  I'm waiting for is a null
  
  Is there a way to do this?
  
  Thank you
  Anita

  Try this

  AMT's column