creating Windows dvd does not recognize the music in my itunes library

Similar Questions

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer of operating system Microsoft Corporation

  System name HANDSOME-PC

  System manufacturer LG Electronics

  System model C500.-g. AEE5GE1

  System Type X 86-based PC

  Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

  H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

  Product key:

  X 16-96084

  CONCERNING

  TUESDAY BIOJY

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 does not recognize the installation discs

  Hello

  I have a problem, and I don't know if there is a solution, but here goes.

  My laptop is a HP DV6-7029WM Windows 7, 64 bit.

  The hard drive was dead, and he was replaced last month.  I sent it to HP.  C is the hard drive, and was originally the recovery on D. Removable media were on E, and when I connected a USB stick or memory card reader it would on F.

  When I came back, hard drive was on C as it was originally, and there was no recovery drive D. D is now my removable media drive. When I put in a USB stick or a memory card reader, which is now on the E drive.

  After I bought this, I put the recovery on a USB key, but I've accidentally thrown out. (My mistake) So I ordered the installation diskettes after that I return my HP PC.  I had 2 DVD system recovery disks and an Application and a recovery DVD Drivery.

  I want to reinstall Windows back to the default settings. I put disc 1 (System Recovery DVD) and close.  I reboot and it goes directly to the office. I hear the whirring disc, but nothing happens.

  I go to the control panel > Recovery > advanced retrieval methods. I click on restart, and it loads files and then says DVD set, which I do. He told me that he does not recognize the installation disc.

  I googled this problem and found a poster on CNET that had the same problem as I do. Also, I can't do a system restore.  My problem is the same as this poster on CNET.  I can read DVDs and CDs.  Those that work very well.

  http://forums.CNET.com/7723-19411_102-568059/Windows-7-installation-disc-not-recognized/

  The files are on the DVD, because I see them.

  I don't know what to do. Should I send my PC back? Can I do to solve this problem?

  Thanks in advance.

  pen

  Hello:

  With recovery disc 1 into the DVD drive, restart the computer and at the beginning of the HP welcome screen, press the ESC key to display a menu of options.

  Select the F9 boot menu option.

  Select the DVD drive on the list of bootable devices, and press the Enter key.

  Watch the screen for additional instructions.

• Qosmio F30 - 112 - Windows XP does not recognize the HARD drive

  Hello.

  I have a Qosmio F30-112.
  I tried to install the Windows XP Professional instead of the Media Center edition.
  However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.

  I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
  But when I try to install XP Professional it always gives me the same error.

  Suggestions for the configuration of the BIOS or solutions for why this is happening?

  Thanks in advance.

  Hello

  Just a question:
  You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubt

  The fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.

  You should have a look here in this doc from Toshiba:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  and should also search this forum for other threads

  Good bye

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Windows XP does not recognize the Sony Walkman NWZ-E344 media player Red

  original title: Sony Walkman NWZ-E344 Media Player Red

  My Windows XP does not recognize my Walkman when installed in USB. All other computers do, then only, assumes that I do not have good pilot.

  Hi brumbybrat,

   

  You must install the drivers for the walkman to recognize.

   

  More information is available in the following links:

   

  Is there a CD of installation for the Walkman® player?

   

  How to install manual and the Content Transfer software for the Walkman® player

• Windows 7 does not recognize the graphics cards

  I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

  In "Device Manager", it shows two units operating as VGA standard with no details etc.

  It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

  Any ideas or help... Please also stay simple for a non PC Geek

  No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

  It of free and worth to be using,

  http://www.Macrium.com/reflectfree.aspx

• Windows 8 does not recognize the photosmart 5510

  Cannot use my HP Photosmart since the installation of Windows 8. My pc does not recognize the printer.

  Hello

  Please download the following program and run it on your Windows 8 machine:

  http://ftp.HP.com/pub/softlib/software12/COL44840/MP-109033-2/hppiw.exe

  You need the printer on your home network.

  Kind regards.

• WINDOWS 8 DOES NOT RECOGNIZE THE SCANNER OFFICE HP OFFICEJET 4500

  MY WINDOWS 8 DOES NOT RECOGNIZE SCANNER OFFICE OF HP OFFICEJET 4500

  Hello

  1. don't you get any error message when the scanner not detected?

  2. do you insert scanner in another port of the computer or to another computer?

  3. were there any changes (hardware or software) to the computer before the show?

  4. other recognized devices?

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Run the hardware and devices Troubleshooter and see if it helps.

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press on enter.
  c: now click material and its.
  d: now click hardware and devices , and then click Next 

  Answer please if you have any questions.

• Lost in car-Windows xp does not recognize the slave drive

  I do reinstall xp home, no problem when I did the system does not recognize the slave drive I have.  As far as I can tell that it's all hooked up correctly.  When I go into disk management it does not recognize the drive either.  All of the suggestions.

  Hi james.williams,

  1. How is the drive connected to the computer?
  2. What is the number of the brand and model of the player?

  I suggest that you check the jumper settings and make sure that the jumpers are correctly positioned.

  Make sure they are in the two master/slave jumper and not cable select.

• Recovering the Windows system does not recognize the hard drive

  Computer does not recognize the hard drive when booting.  Guard gives me 1782 disk error.  Then try to use the ROM installation thing and throw a disc hard test there is no option to test anywhere.  Computer was working fine this morning and then I stop when I turned it back on it was not properly start.

  I have a zt3000 running xp sp3

  someone please help me, thanks

  Hello

  Please reinsert the drive from the rear panel and check if the device detects the drive hard in case you have the same problem, then the hard drive is bad, you need to replace the hard drive and reinstall the operating system on the unit to return to its operating state.

• Windows 7 does not recognize the DVD drive! HELP need before March!

  Guys, my DVD drive was wrking a few weeks now, it's not. Windows 7 does not detect it shows in my computer or Device Manager it isn't freeking.

  Although, when I start my system, I checked it in the BIOS and it has been detected. So please help me! I need a solution before March 2012...

  Hello

  Do you know if there are major changes or downloads or something like that to the computer until the reader has stopped working?

  Have you tried a system repair on a date where the car worked very well?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

• My laptop that is running windows xp does not recognize the computers on the network running windows 7. Any advice?

  I recently created my home network again.  It consists of a laptop running windows 7 Professional 64 b, b Office windows 7 Professional 32 running and a netbook under windows xp home.  Two computers running windows 7 recognize each other and share correctly, but the netbook will not recognize the other computers on the network at all.  They can see it, but then say they can't access them when you are trying to access.  They are all on the same workgroup.  Computers that run windows 7 discovered the network, file and printer sharing, and public folder sharing all lit.  Password sharing is disabled and windows manages the homegroup connections.  Any advice would be appreciated, I need to use computer dvd players 7 on the network to install some things on the netbook.

  Hi mahmorc,

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Update the latest drivers for the network card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658