Creation of DVD Windows doesn't recognize DVD burner

Similar Questions

• Gigaframe L80 - Windows doesn't recognize it as a second monitor

  Hello

  I have a Toshiba Gigaframe L80 but is not fully functional.
  Windows doesn't recognize it as a secondary monitor so I can't extend the desktop in the framework.
  Only works in clone mode.

  I tested it on 2 computers according to the manual and the addon, I installed the .NET 2.0 (and 3.0) and I use the software/driver that comes in the box, but it is not recognized and is not shown in display properties.

  Can you help me?
  Is there a driver/software/firmware for the L80 was updated to fix?

  Anyone with the same problem?

  Hello

  I found this info:

  Sub visualization allows the Gigaframe to act as a second monitor for your PC
  To activate the view Sub follow these steps:
  (1) install subview on the laptop.
  (2) in the main menu of gigaframe select settings, then press OK
  (3) select subview and press OK
  (4) select and press OK. Now the Gigaframe is in display Sub mode and is not operable.
  (5) connect the GigaFrame to your PC with the supplied USB cable
  (6) run the subview on your PC software
  (7) the display of Sub pop window, display the current screen display in the gigaframe

  By activating the function void View the willing Gigaframe of two display modes:
  Scope and the Clone mode.

  To assign the suffixe_etendu mode_ Gigaframe follow these steps:
  (1) right click on the desktop and select properties from the menu
  (2) in the display properties panel select the settings tab
  (3) under the view drop-down list, select 2. default monitor on Subview
  (4) check the option extend my Windows desktop on this monitor and the bottom of the settings tab

  Note: in extended mode screen gigaframe becomes your office extensions!

  To set the Gigaframe in _Clone mode_ follow these steps:
  -Uncheck the extent my Windows desktop on this monitor option!

  The gigafmae display the same screen as displayed on the monitor of your PC in Clone mode!

  Love let you subview job function properly, please consider to stop your acceleration DirectX function! _

  If you want to play the video on the Gigaframe, you must select it * as primary monitor! *

• My 2 minute video of camera kodak registration has an .mov extension there. Director of Windows doesn't recognize. Quik time player someone. How can I create a small movie of 2 minutes with video and still images

  How to create a movie with Windows movie maker, it doesn't recognize a small video with the extension. My camera kodak MOV.  Windows Media will play sound only.   Quik time player shows video & sound, but it seems to change you must buy software Quik Time.  Is there something that recognizes. MOV and is free?

  If you convert the .mov file to .wmv format
  You should be able to open it in Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• I get a message that Windows doesn't recognize MIME. What is it?

  MIME

  that means when my computer says windows does not recognize my mime - trying to figure out if my computer is compatible with the upgrade to windows 7

  http://en.Wikipedia.org/wiki/MIME

  Run the Upgrade Wizard (Google it)

• Windows doesn't recognize new photos.

  Whenever I insert my digital camera card, windows do not recognize only new photos, you want to load all images on the card.  A box used to come with just the new photos in and I could choose the ones to whom I wanted to download but it just won't happen again.  Any ideas?

  This can help...

  Only import new photos from camera, not the "old"
  a. open "Windows Photo Gallery".
  b.Click on "file."
  c. click 'Options '.
  d. click on the tab 'import '.
  e. the "File name" field, click on the pointer > select "Original file name.
  f. click "OK".

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Satellite L650 - 1MC Windows doesn't recognize RAM but BIOS is...

  My laptop has the following memory configuration:

  1 x Samsung 2 Gb module (which was the original module supplied with the notebook)
  1 x Kingston 4 GB module

  The BIOS recognizes all of the 6 GB, it says ' total memory size: 6144 MB '

  However, Windows 7 (home premium 64-bit) "6.00 GB (2.0 GB usable)"

  I have been told it is perhaps down to a serious virus - I did a complete analysis of the MSE, that is something of which I removed, however it says that 2 GB of RAM is usable.

  I tried to go into msconfig/startup/advanced and change the maximum memory of 2048 to 6144, but this just changes again in 2048 Mb.

  I would be really really grateful for any help with this.

  Thanks :)

  Thanks for the comments. ;)

• My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.

  Original title: CDs? DVD not recognized

  My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.  No error message does nothing! ???

  Sorry my bad https://support.microsoft.com/en-gb/mats/cd_dvd_drive_problems/en-us , Ric (I've corrected the link as well)

• How windows media player recognizes what is dvd playback

  When you put in a disc and you are offline windows media do not identify the DVD.  When you connect to the internet and that put the DVD it doesn't recognize the DVD and displays useful information about the DVD.  What information of the disc using Windows Media Player?

  Information about the digital media content, such as artist, title, album, producer, etc.

• Windows Live Photo Gallery does not recognize my CD/DVD burner. How can I fix?

  I installed Live Photo Gallery (twice), but it does not recognize my CD/DVD burner, which works OK otherwise.  How can I fix?

  PCubedP

  Hello

  As the question is limited to Windows Live Photo Gallery, I suggest that you post the question on the link provided below for assistance.

  http://windowslivehelp.com/product.aspx?ProductID=20

• WINDOWS does not recognize my cd/dvd drive

  Windows stopped to recognize my cd/dvd drive. I can not read or write discs. I tried the Microsoft Mr.FixIt and it keeps saying "an unexpected error has occurred please try again later." I don't know what else to do. I've tried everything. The player is not yet in Control Panel under devices. And I don't know wut luk in the BIOS.

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Creation of DVD Windows can't find the dvd burner

  Hey, I have long used Director Windows and published my films through windows dvd creation, and programs have been working perfectly... but now I have a problem... When I get to the part where I want to make the movie, I can get the project ready and make the titles and all, but when I'm choosing to burn the project/dvd, create dvd windows can't find the dvd burner? I checked the bios and Device Manager and used another program cdburnerxp to burn a file... Then, how the creation of windows dvd to save my dvd burner?

  Hi mwinterberg,

  I don't know if you are still struggling with this problem, but looks like it's maybe a codec for your DVD Burner problem. See the following link for help with this:

  Codecs: Frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/3d0c5a49-8F61-45cc-8A7D-38c4695ba9291033.mspx

  I hope this helps. Please report if you still have any questions.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player won't recognize that my cd/dvd burner, so will not burn anything even if during 3 years, until now

  Windows Vista operated computer that has worked well so far, now Winsows Media Player does not recognize my burner. Tried to do the upadting for my burner,

  but said that everything is up to date, can someone help me?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows DVD maker does not recognize not my DVD burner.

  After I create a project and start to move forward through burning. I can't select a DVD burner from the drop tab on the first screen. If I try to burn just said that I did not choose a burner and when I come back I am still unable to choose as it still doesn't apear in the dropdown tab menu. How can I get this progam to recognize my DVD burner?

  I already checked and updated my driver for the reader. I also burned some data (music) on a DVD and was able to play it through media player.

  Any help would be greatly appreciated...

  Bigd1

  Hello, bigd1

  Save the screen of the computer (start-> Computer), is labeled as a DVD - RW drive?

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My windows will not recognize my CD/DVD drive

  My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Windows Movie Maker project doesn't find or burns correctly in DVD maker overview

  I have created a Windows Movie Maker project, composed of many avi files (129 min) and I can see the entire project in Movie Maker, but when I go to burn a DVD in DVD maker I can only listen to excerpts from the first minutes 33 and the rest is a black screen with no audio (as if there's nothing there). Also when I burn a DVD only burn the first 33 min.  I tried to publish the project to my computer in WMV format, but I get an error when I try to open in DVD creation that the file is not indexed and cannot be opened in creation of DVD. I tried to uncheck the vidoe filters and that has not worked.  Help, please. I put many hours of work into this and am very frustrated.

  The file is too large and complex. The best would be to create
  several small projects... To each post in the. WMV or. DV - AVI
  format in a folder on your hard drive. Then you can import the collection
  video files in DVD Maker and each clip becomes a scene
  (Chapter) on the DVD. (You can have up to 18 scenes).

  The following links explain how to post:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  Also... for a project for more than two hours... There is a possibility that
  You may need to use a DVD Double layer...

  Good luck...