Creation of master plan?
Hello, Im trying to create a plan of mass for a project im working on. I saw a plan button but that gives me problems because I can't change it. I have my out buried components and all traces in place. How to create a master plan and modify it. I couldn't figure how to add no trace after his in place or by removing all copper. Any help would be greatly appriceated.
There are 2 ways to make a copper plane. You describe is basically a copper 'for' - (Place-> Poweplane...) and it fills a copper area attached to a specific network of the whole plan (less trace/pads). It can cancel - which means that it will not cover the existing tracks and you can set traces after the plane of copper is placed. Also, you can remove brass Islands, and you should be able to select (make sure that the copper area selection filter is enabled). I confirmed to Ultiboard v11.
The other method is box-shaped polygon (you manually specify the vertices) - it's called the copper area (site-> box of copper). Similar to the powerplane it can be attached to a net and can also cancel (cancellation is enabled by default - and you can modify other properties to specify other characteristics) and therefore you can place traces with other net transfers in and through the plan (and they will automatically have a release around them). You can also change the shape of copper area and delete it.
Is there something that I just would like to do but can't? What version do you use?
Tags: NI Software
I do a lot of Web wireframing and high-fidelity design. Many pages have many common elements (header, footer, navigation, etc...). With the help of symbols is a great time saver for me, but it would be great to create a MASTER work plan! InDesign has master pages, but it would be good to depend on one tool to do it all, especially with the illustrator tool set!
So here's how it works: create work plans multiple for your project (in this case, it is a Web site design). Define the first work plan as the work of MASTER plan. Anything you put in the main work surface will be duplicated to all other work plans (or the individual to that you would select to copy). When you change something, like a button in the main navigation, it will change in all other work plans. When you create or change something in a non-maitre work plan it will not change anything in the main work surface. Thus, you will probably have to separate an element of the master plan of work to make it unique (for example if another page needs).
That would be so AWESOME!
You could make these elements into symbols, to update an and then they are all updated. Break symbol according to the needs.
IAM new planning. I have planning and configured (creation planning instance, Datasource). When I connect to the workspace and you want to create the new planning application. The wizard opens successfully. After giving the name of the application calendar, currency type, type of Plan, etc... When I click Finish to create a new planning application, it says * ' year error occurred while processing this page.» Check the log for details. * but I have observed something the app was created in Essbase databases and schema. If anyone can tell me wats the exact prob. where can I see the details of the journal. Help me.
Thanks in advance.
Databases will not be created until you have created until you refresh to essbase of in planning, you are not at this stage. Only an essbase application will be created.
What I suggest do you, is remove the essbase application. Then run planning in the start menu and not as a service, this means that you will get the error messages displayed in the window.
Then try and make creating application again and see what errors are produced.
See you soon
Only a client, no personal interest. I was looking for a reasonable plan for Smartphone for three girls. Phones Droid X used on Ebay, $100.00 or so each. Page Plus sells 250 Verizon minutes per month for $12.00 per phone. Use your Google voice on your home or any other WiFi network to send free SMS, free Groove IP application for free voice, once again, on the WiFi for free. Have your MEID number, located below your battery, 13 digits? Your Google Voice number is your account ID if you import your Google voice phone number to the Page. It's Verizon service cellular coverage is the same.
I am trying to create a new master page / detail in Apex 5.0, and at the end of the dialog box, I get this error message:
Session state protection violation: this can be caused by manually editing the protected page P24_MASTER_PAGE_MODE point. If you don't know what caused this error, contact the administrator of the application for assistance.
[I am the administrator of the application, and I have not the slightest idea either.]
The error occurs when I click Next in the dialog Page attributes. The error also occurs in other applications in the same workspace. So I don't think it's important, but I replace the default detail Page number. (The default number of Master Page is grayed out.) In addition, the dialog box layout I had selected... in a table on the same page. I've also specified no master navigation and no reports of master.
Following archived discussion of v4.1.1, Session State protection violation, I modified a diagnostic query and run the following in my diagram:
Select item_id, nom_element page_id, region of apex_application_page_items where nom_element = ' P24_MASTER_PAGE_MODE'
I'm not abreast of any application in my workspace with a Page 24 and sure enough, this query returns no data found. Please take note of this before suggesting to change the attributes of the element. I don't know where the item is and not only the database, apparently. Apex seems to think there is - but where?
Since an earlier discussion which went nowhere, I crushed my most recent request for export file, but that has not solved the problem. I also went into my workspace apex.oracle and created a form master / detail without error.
Thanks for your help!
Apex, the product you hate to love.
It turns out that the dialog box create a Master Page / detail has a Mode option of the Page on modal Page attributes page. I'd be willing to bet, this option is not P24_MASTER_PAGE_MODE. (There is also one for the details of page: P24_DETAIL_PAGE_MODE?) But it has the Normal and gray value.
It is also now a Select list after my dose; I think it was a type item view only before the fix, which only confirms my thought. I was wondering, which could affect, or enable or disable the modification of the attributes of session state for that element. Model and its theme came to mind, and I remember that I had tried to understand something on a model in the last days, had made a change and tried to cancel it.
To no avail, apparently.
Thus, a little more explore new territory, trying to find the modified model and could not. But I read that templates are collected into themes, and I found that I could renumber 26 theme in the application (926). Then make a theme create, from the repository, changing from standard to all themes, click theme 26. Then it was switching themes and rematching models and remove the renumbered theme 926.
Voila! I can now create a master page / detail without report master!
Thanks for all the help, with particular satisfaction for Pranav.shah, who was on the train right but don't know which track to take.
I installed Hyperion Planning 184.108.40.206 on linux 32-bit and trying to create my first application. I have validated my datasources and uses the wizard to create my first sample application. When I click on create, I get an error and inside the /home/oracle/Middleware/user_projects/domains/EPMSystem/servers/EPMServer0/logs/Planning_WebApp.log error is:
Error running query SQL_ADD_ACTIVITY_LEASE with parameters [1, 1138881444, 11:01:27.0 2014-07-06] 
java.sql.SQLException: ORA-08177: can't serialize access for this transaction
Is it because a certain table is locked and I need to unlock it in the comic book? Any idea would be appreciated.
1. log in DB used for the validation of data source and enter the command below
set the serializable transaction isolation level.
2. restart planning services
3. try to create an application
I was wondering if it is possible...
I would like to create a series of work plans that begin in the upper left corner of my canvas. Right now, all arboards are created the dead center.
I can't find an option for this, but is there a way to do it without having to move manually work plans that I create? It's a lot of time if I want to do a lot at once.
Not sure that I understand you exactly, but considering what you want to avoid this
If you suggest to use the tool of work plan to move the original page here
Then, when you duplicate drop target for darts you will get more
You did a good job, explain in words, but screenshots can really help others for instance, you understand, do not hesitate to use the camera tool
I recently discovered some problems at our request on the passivation of the AOS.
After reading some time on the web, I disabled the AM pooling on our application for testing on my built-in server that our request is 'activation-safe'
After that, I have the following error when I try to create a new line on a "actually dated VO:
to oracle.adf.controller.v2.lifecycle.Lifecycle$ 6.execute(Lifecycle.java:190)
at $200 (ADFPhaseListener.java:34) oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access
to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$ 3.after(ADFPhaseListener.java:428)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged (Native Method)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
If the AM pooling is enabled, no errors...
No idea what means this exception?
I use JDev 220.127.116.11, let me know if you need additional information on the VO, entity or something else...
Many thanks for the suggestions,
So what solved my problem was simply uncheck the "cascade update key attributes" relative to the association (composition). I still don't understand why that would be a problem to check if...
No restrictions on Association (composition) with the option "Cascade update key attributes" checked when passivation/activation takes place on a newly created on two line master-detail VO?
I recently finished a course of vmware vsphere 6.0 and I want to prepare you for the exam VCP6.
I remember in the 5.5. version you had a review plan, but I could not find to 6.0
Disappeared from this concept of plan of action, and I must focus on the purpose of the discussion on this page? or I'm looking in the wrong place?
Although there is no PDF separate document as a plan review for these exams, if you look at the links you mentioned, it gives you all the information you normally need blue print review.
as a number of questions, passing score, cost review etc.
If you look under Exam topics, there is also list of Sections and under these objective reviews are listed.
I have MasterVO and ChildVO. And the association between the two are 1 to *. I have a requirement like, I need to create the line in ChildVO at the time of the creation of line MasterVO.
I used the association based on the entities to create the link. This link to view created accessor ChildVO in MasterRowImpl as type RowIterator.
Actually my idea is to substitute create method in MasterVORowImpl and call ChildVO ViewObject and call the method. createRow() on it. But I don't have access to ViewObject, instead it gave access to the RowIterator.
Could you please provide any pointer to reach above feature?
Thanks in advance.
Jdev version - 18.104.22.168.0
You can use the line iterator to create new toys of the child vo.
Check the doc http://docs.oracle.com/cd/B14099_19/web.1012/b14022/oracle/jbo/RowIterator.html and you will find the createRow and insertRow methods in this interface. The framework has created the straight for you.
With passage in the foreground master deleted feature, how to we move something in the master document to be at the top of the content of the local page?
Master page do not appear in the layers panel, I see...
Open your master (or whatever that is the page contains your footer). Go to the layers panel. Create a new layer. Select all items in the footer. Go to the Menu object. Select move to layer and choose the created layer (probably the 2 layer). Your foot will now be above the rest of the content of the site.
The tutorial 'Working with Master Pages' Muse and other documents suggest that "object...". Move to... Master in the foreground', it's how place you images in unique pages behind Master Page elements. I don't have that option in my version of Muse CC. Please notify.
This option has been replaced long ago by a comprehensive system of layer.
Open the layers panel and you can move each object where you want.
If you create a new layer, it is present on all pages, the master page as well. This allows, for example, to have a menu widget on a master page and post it in front of any object on your pages 'normal '.
You will find a video:
I'm new here so forgive if this question is put to death!
I'm studying towards my VCP4 certification (self-paced + exam prep classes) and was surprised when a friend told me that the action plan for the course has changed.
VMware warns members of the community forum of new changes to the action plan and where can I download most uptodate for examination blueprint?
Also my route chosen (Self study + exam prep classes) will allow to qualify for VCP certification?
Thanks in advance
Troy is located on the two sides. VMware don't normally warn people of plan changes, but that does not change often and most of the changes is cosmetic or to repair broken links. The objectives of the review have not changed since the first public version of the VCP4 exam. You will need to attend an official course of vSphere instructor in order to qualify for the VCP certification, you will not be certified unless you do whether or not you pass the exam. I can help get you reserved (e) on a course that by the look of your forum user name, you are based in the United Kingdom, send me an email if you want my help with that: [email protected]
I don't see an option for object-> move--> master foreground when I'm working on my master page in Design view. The only option I see is layer1 and it's grayed out. Is this a known issue?
The option "move to" is abandoned since we launched a workflow overall better to arrange the objects using layers - http://helpx.adobe.com/muse/tutorials/layers-muse.html.
You just need to move the content of your master page to the top layer of most in the layers panel. And the content of the pages of content in the other layers to be able to manage easily. This shoud keep the contents of the master page at the top.
I'm having a strange problem when creating a planning application.
In the workspace, I created a new source of data and after a planning application. After I pressed the finish, I received the following message:
There is no such thing as X the admin user for this application
You have created a new planning application.
The application is created in Essbase. Admin has security defined in the application is created automatically.
The application does not appear in any application group to Shared Services.
I can't remove the application in the workspace. It says Application cannot be deleted, check the logs for more details.
I'll post the logs later today, probably see them that someone can point me in a good sense.
I already rebooted without success.
It is useful to have a read of http://download.oracle.com/docs/cd/E17236_01/epm.1112/hss_admin/ch03s05.html
and look at the 'Filter to limit the users' property, you can include a filter that exclude certain AD user as admin.
See you soon
Maybe you are looking for
I can't connect to my usps. com account, but after update to 30.0 FF, I am unable to process a shipment. I am able to enter all the info (sender/expedition/type/date/insurance pkg shipping address) and when I try to "add to cart" - I get shots back a
In recent weeks, ATT claimed for my iPhone running iOS 9.3.1 uses given to 4 - 5 times the rate that I've used over the past years - around 1 GB/day. As far as I know, nothing has changed in my network setup or my usage patterns. The personal hotspot
Ok. so I googled this and thought to throw out to the mac cognescenti. advance apologies if this isn't the right forum for this, but apple seems to come with great new tools very frequently. Anyway, here goes: is it good hardware or software to track
I'm on the pay and go. BlackBerry Curve 8520. Was having to pay £15 a month, so I changed the simplicity by ringing the hotline info thingy. I pay £10.50 per month now for what should be unlimited texts and 100 MB of internet every month. But the int
How to remove Adobe on my Mac computer?