Creation of Raw Device Mapping (RDM) is not supported for local storage (1017530)

Similar Questions

• How to migrate VM from\TO Raw Device Mapping (RDM) (data store)

  Hi all

  I have aske on the migration of VM from\TO Raw Device Mapping (RDM) (data store)?

  Thank you all for your support

  If you are using vSphere 5, then you can SvMotion the VM attached to a RDM (physical or virtual) with no problems. This means that only RDM mapping file will be moved to another data store without any conversion of changes on the real disc of RDM.

  Note: Do not attempt to change the format of disc thin or thick, which would cause the RDM disk converter for virtual disk.

  More info here: http://blogs.vmware.com/vsphere/2012/02/migrating-rdms-and-a-question-for-rdm-users.html

  If vSphere 4.x is used, hot and then migrate the virtual machine to another store of data will not change the format of the ROW, only mapping file will be moved. This is true for virtual and physical RDM.

  However, the cold migrate the virtual machine to another Datatore will change the ROW to virtual disk format.

  HTH... Let me know if you have any questions...

• RAW Device mapping (RDM)

  OLA,

  Tenho o seguinte caso, 2 LUNS of 1.5 t apresentado para 3 guests. vMotion, HA, DRS, São os recursos than serao band data recovery.

  Disponibilizar uma LUN only preciso para uma VM, para ser minha application data base.

  Awesoe than este caso e conhecido como Raw Device Mappings (RDMS).

  Docks os problemas posso ter tendo em vista meus recursos citados para terms.

  Shivers?

  Very docks series os pros and contras?

  Obrigado

  Te svetila a sober tudo ler na documentacao oficial:

  MAS básicamente, os benefits e voce tem uma superior performance using RDM ao VMDK investment, isso e bom para fileserver large por exemplo. Contact a benefits, vai dpender to voce vai use em or virtual physical compatibility mode.

  Boa sort

  Sober Raw Device

  http://pubs.VMware.com/vSphere-4-ESXi-installable-vCenter/index.jsp?topic=/com.VMware.vSphere.esxi_server_config.doc_41/esx_server_config/raw_device_mapping/c_limitations_of_raw_device_mapping.html

  Benefits

  http://pubs.VMware.com/vSphere-4-ESXi-installable-vCenter/index.jsp?topic=/com.VMware.vSphere.esxi_server_config.doc_41/esx_server_config/raw_device_mapping/c_limitations_of_raw_device_mapping.html

  Limitacoes

  http://pubs.VMware.com/vSphere-4-ESXi-installable-vCenter/index.jsp?topic=/com.VMware.vSphere.esxi_server_config.doc_41/esx_server_config/raw_device_mapping/c_limitations_of_raw_device_mapping.html

• RAW Device Mapping (RDM) (data store)

  Hello everyone,

  I would like to ask I datastore, RDM, I use it with some VMS but when I browse with vsphere on my storage I Ididn find listested on my datastor

  could you please sometimes why not found Ididn.

  Thank you all for your support

  Used as the RDM disks do not present as data stores in the view "storage." There you will find only the VMFS LUNS data warehouses are in format. However, all LUNS - any that they are used as VMFS or RDM data warehouses - should show when you select the vmhba appropriate in "storage adapters".

  André

• RAW Device Mapping (RDM) Questions

  The script (required):

  1 vm that will act as a file share.  It will take an operating system drive and a 200 GB data drive.  It is possible, that it may require expansion in the future.

  3 vms who will act as servers XenApp.  They will require 80 GB of space each (as a single disc).

  We wonder if RDM would be a good option for or all of these servers.  We have used only VMFS at this point, but are interested in the benefits of the RDM.

  Issues related to the:

  1. I said RDM would improve I/O on systems requiring a high I/O (eg., SQL) until I see any advantage on a sharing of files right?  How about on XenApp servers?

  2 RDM must be added as a LUN full, correct?  In other words, when I create a LUN on the storage (Dell MD3000i) it will be presented to the ESX host and when I create on the virtual machine, I have only the choice to add the LUNS together as an RDM?  Ideally, I would like to create a group of entire disks on the MD3000i and it cut up.  I should create 4 MON (1 @ 200 GB) and 3 @ 80 GB?

  3. how the reader of RDM file sharing data, would expand if I have to?

  Thank you.

  1. I said RDM would improve I/O on systems requiring a high I/O (eg., SQL) until I see any advantage on a sharing of files right? How about on XenApp servers? Meh I would go with VMFS for file server no real benefits with a ROW here. I really can't tell in what concerns the systems of Xenapp, but said app provider unless otherwise I would stick with VMFS

  2 RDM must be added as a LUN full, correct? In other words, when I create a LUN on the storage (Dell MD3000i) it will be presented to the ESX host and when I create on the virtual machine, I have only the choice to add the LUNS together as an RDM? Ideally, I would like to create a group of entire disks on the MD3000i and it cut up. I should create 4 MON (1 @ 200 GB) and 3 @ 80 GB? Full LUN, yes

  3. how the reader of RDM file sharing data, would expand if I have to? IIRC you expand the LUN on the storage, the case comments and re-create the mapping of RDM. Start the virtual machine and should see the guest space.

• HP EVA4400 + ESX 3.5.0 + discs Windows 2003 Raw Device Mapping

  Hi all

  I'm testing a configuration to help:

  • HP EVA 4400

  • ESX 3.5

  • Blade HP c-class

  Verification of compatibility EVA4400 on-site HP Spock, I found this note in the section Notes General Guest OS (1): "(7) Raw Device Mapping is not supported on Windows 2003 Guest Operating System load."

  I would use snapshot EVA (BC) to a Windows 2003 Server (not R2) for backup.

  In the VMware HCL, I have not found confirmation of this note.

  1. does anyone know if the note concerned only W2K3 or same W2K3 R2?

  2. "is there anybody out there" who uses this configuration? EVA4400 is: + W2K3 in ESX 3.5 + RDM + instant. Any problem?

  Thank you very much

  Max

  The restriction was lifted (don't know why he never existed - perhaps no trial):

  Release notes for HP StorageWorks 4400 Enterprise Virtual Array (XCS 09006000)

  Reference number: 5697-7997, second edition: January 2009

  * Configuration of VMware for the raw device mapping details

  RAW Device Mapping only is not supported with Windows 2003 Machine virtual guest operating system and versions prior to version ESX 3.5.0.

• VM 2 not clustered for a raw device mapping

  Hi, I'm new in the world of VMWare. I watch discussions related to this issue, but the only one I met was on "more than a vm in the group for access to the raw device mapping drive". In this thread, we had to change the vmfs to a shared access mode.

  My question is:

  I want to have 2 vm with the same raw disk bound, but only one of them is going to power. This virtual machine (it is power on) will work with the raw disk (data base), while the other virtual machine is turned off. In the case of the first vm failed, I disabled this virtual machine and turn on the virtual machine second. This second vm start working with the database in the raw disk. How can I do this? Is necessary how to access shared for this problem?

  I hope you understand me with my poor English.

  Thank you very much.

  What you want to do is simple, you do not need to use shared mode. Probably the best way to achieve your goal is to build your first virtual machine and get it all set up and then remove (do not remove) the RDM and the clone to the virtual machine. This will result in two virtual machines with the same host name and the same SID (assuming Windows here) - two IDENTICAL systems. Power on each virtual machine in turn (only lit at the time) and add the ROW as an existing drive. As long as one virtual machine is running at the same time, there will be no problem.

  HTH,

  KLC

  Ken Cline

  Technical Director, virtualization

  Wells Landers

  TVAR Solutions, a company of the Wells Landers group

  VMware communities user moderator

• Frames and Raw Device Mapping

  We used frames for some time on the storage array that we use for our 8 guests ESXi 5.5

  Of course the frames must be enabled at the end

  Array of the ports of kernel VM VMWare DVSwitch <>- <>- <>- Core Switch <>switch - Bladecenter

  If I SSH in one of our guests and to make a vmkping s 9000 to a port on the Bay, it shows that the frames are working well

  We bought another Bay of storage to be used strictly for home video of a surveillance system. I called cameras server that runs as a virtual machine. I added to it a 3 TB of this new array raw device mapping. Can I use the frames between the new table and the virtual machine that uses the RDM? I'm a little unclear on the string "end-to-end" when you use a RDM. The beginning of the part of the string is shown below. Do not know whether or not the RDM traffic crosses the DVSwitch

  Bay <>- Core Switch <>- Bladecenter switch

  When I SSH into a host that has one of the virtual machines with an attached RDM and use vmkping s 9000 to a port on the table ROW home that doesn't

  I have a vlan not routable separated for all traffic storage

  Usable for RDM frames? If yes how to do this job?

  Yes, that's why I try a ping to 8960. It seems that the frames is enabled but due to the load of package, it is a lower number. Most of the devices and or switching equipment ran to 8960-8972. Here's why.

  ICMP/Ping is not encapsulate the 28 bytes ICMP + TCP header. That is why the maximum size of the data part of package 8972 alone. Try the ping to your windows prompt to 8972 and let us know what you get.

  I hope this helps.

• Grey raw device mapping

  We are implementing vsphere 5. our host machine is HP DL 380 G7 and storage storage IBM DS. We are implementing SAS SAN using HBA cables. There is no iSCSI or fiber module. We want to implement file on vphere server using win Server 2008 R2 SP1. We want to access our data directly from SAN LUN and not vmware data store. Whenever we try to add disks of virtual machines, raw device mapping is gray. If we check in the adapters of storage, we can see available LUNS. I don't add it to the data store. still, it is grayed out. Why? Please help us

  Welcome to the community,

  Please read http://kb.vmware.com/kb/1017704 to find out if your storage system supports the RDM and whether it's save to disable the ROW filter. Article is not tagged for ESXi 5.0, but I guess this also applies.

  André

• The kernel cache exists for physical Raw Device Mapping?

  Hello

  I use a SAN storage disk attached to the operating system as "Physical Raw Device Mapping" and mounted at/mnt/disk1.

  I was lke take backup of/mnt/disk1 with "SAN Storage FlashCopy function", which copy entire disk in the SAN storage box, bypassing the operating system Linux and VMware kernel.

  Summary of the backup script is as follows.

  Step1: Synchronize "clear the cache of the Operatiog Linux system

  Step 2: umount/mnt/disk1

  Step 3: ExecFlashCopy ' run SAN Storage FlashCopy function

  Step 4: mount/dev/sde/mnt/disk1

  But if the VMware kernel cache for 'Physical Raw Device Mapping Device', "Empty the Cache of VMware" is necessary in step 2.5.

  You know VMware cache exists for P "effective Raw Device Mapping Device", and how do I rinse it out.

  Thank you.

  Your proposal is false. ESXi is not linux and does not cache for VMFS.

  ESXi does not cache the IO VM guest operating system receives IO acknowledgement when the disk controller to acknowledge completion of e/s.

  ESXi doesn't have any cache for RDM, what is physical or virtual.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• Virtual Raw Device Mapping

  Can someone explain to me the difference between a regular virtual disk and a virtual raw device mapping? When I create the RDM I am just creating a file pointer to the correct virtual file? If yes why anyone would use virtual raw device instead of just mapping to create a typical virtual drive? I understand the benefits and limitations of the physical RDM I just do not understand the goal of the RDMS virtual.

  Well, even if a RDM in virtual mode allows you to use the tricks and VMware snapshots is not always the same thing as VMFS datastore.   As stated previously, you can easily remove this ROW and the provision of a physical server without losing a bit of data or to copy.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• VM cloning with raw device mapped drive

  Hey people... need help.

  I have a virtual machine that lives on a 500 GB Lun. The virtual machine has a C: drive of 60 GB (OS) and a 1.5 TB Raw Device Mapped LUN.

  My problem is I'm trying to clone this machine to have a backup of it. However when I try to clone a 500 GB or even 1 TB data store it says that I don't have enough space to do. I went and removed the RDM 1.5 TB LUN in cloning options so that it would only clone the C: drive. Still the same message.

  Also I noticed that the data of 500 GB store the VM currently living has a hard 1.5 to file which I assume is the Raw Device mapped LUN. Why this creates a file if it is mapped SAN. How she even to create a file of 1.5 TB on a 500 GB data store?

  Certainly, this seems to be the reason.  Instead of a clone, use vmware converter standalone and treat the VM as a physical server.  That should allow you to continue.  If nothing else, you can 'remove' the raw device of the VM, clone and then add the raw device to the original.  Converter should work well.

  vExpert

  VMware communities moderator

  vmwise.com / @vmwise

  -KjB

• Cannot add Raw Device Mapping as hard drive

  Hello

  We have 2 Server 2008 Virtual Machines (which are clustered) that make up a Cluster 2 node x.  The ESX servers that organize these VMs (ESX Server different on each) are connected to a San.  When I place these two VMs, I could add a hard drive "Raw Device Mapping" without problem - he could see data warehouses, I had Setup on the SAN.  However when I try to add a hard drive "Raw Device Mapping" on the 2 new virtual machines, the only options I have are:

  -Create a new virtual disk

  -Use an existing virtual disk

  Any ideas why Raw Device Mappings is greyed out?

  You add the second node RDM disk by selecting "use an existing virtual disk".  The ability to add RAW devices is only available for RAW LUN which has already been mapped to a virtual machine.

  When you add the ROW to the first node, a mapping for the RDM vmdk file was created. It's that developed from the second node.

  See http://kb.vmware.com/kb/1004617 for more details.

  André

• Aprarece RAW DEVICE MAPPING

  Hola

  Quiero crear una nueva virtual infrastructure mi Máquina y estoy lanzando el Assistant "customized" para indicarle "raw device mapping" hacía una lun of the cabina ISCSI as tengo.

  Me appears "aprarece" in gray.

  ¿Esto porque?, put back esx ven el cabina física, asi como el iscsi datastore software iscsi as tengo con openfiler, y tengo MVs running en esos data warehouses.

  ?¿?¿¿?

  Gracias

  Hola,

  ESO are, primero lo tiene than ver el ESX como una LUn, luego el disco Crystal for the VM as RDM lun of the esa.

  Saludos

• Init DirectDraw(), screen buffer to create Surface() - cannot create a DirectDraw Surface. Hardware closing - DDERR_NODIRECTDRAWHW - one game only DirectDraw object creation was attempted, but the driver did not support any hardware.

  Nancy Drew games - get this error message: Init DirectDraw(), screen buffer to create Surface() - cannot create a DirectDraw Surface. Hardware closing - DDERR_NODIRECTDRAWHW - one game only DirectDraw object creation was attempted, but the driver did not support any hardware.

  Any suggestions?

  Hi gkfuller,

  Have you followed the steps that I recommended above? If this isn't the case, please do and check the result.

  Step 1: Remove the game completely:

  If the above steps do not work, uninstall and reinstall the game should solve this problem.

  How to change or remove a program in Windows XP

  After you have uninstalled the game, check that all the game files have been removed from your computer. The remaining game files will be in one of the following locations (depending on the title of the game and your operating system):

  C:\Nancy drew
  C:\Program Files\Nancy Drew
  For XP: Folder 'My Documents' (C:\Documents and Settings\nom_utilisateur\Mes Documents)

  For more details, see: Impossible to uninstall using Add/Remove Programs

  Step 2: Reinstall the game

   

  To install the game manually, see the steps in the article below.

  http://www.herinteractive.com/CMS/FAQ/install-does-not-start-when-i-put-my-disc

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.