Creation of recovery disks

Similar Questions

• Creation of recovery disks - problems

  Hi all

  I wonder if anyone can help me?

  I recently bought a used HP Pavilion DV6 (DV6-2110ea - product number: VY095EA) laptop and I have problems with the recovery system.

  When I bought it, I managed to recover the system to set up the laptop back to settings by default, and as an afterthought, I tried using the recovery software to see if I could create a set of disks.

  I ran the program expects to be told that the records had been created, but the software came with the message that he has split the partition to create the DVD.

  After a while, he came with a message saying that the disc 2 of 4 was created and asked for the next DVD.

  It seems that the creation of recovery disks never finished original owner and I was wondering if there was a way to start the process so I could successfully create disks.

  Any help you guys could give would be extremely useful.

  Thanks in advance.

  Re the above:

  I have authorized the creation of recovery software complete two final discs that then created file "hpdrcu.prc" in both the location suggested above.

  I deleted the and represented software and it has allowed me to create a complete set of discs.

  Whether if they work, it is another matter altogether, but I'll cross that bridge when I come to it (again - there's always Linux)

  Thanks anyway.

• Pavillion g7 nitebook: creation of recovery disks

  Just bought a refurbished laptop (new never been used) that comes with windows 8. I want to spend to 8.1 and then windows 10. My problem is that it's said I can only create a recovery disk once. If I create a recovery disc now until I have the upgrade (recommended) I will be able to create a disc of recovery once I have install windows 10? Windows 10 is what I intend to use to have a recovery disk which would be the most important, but I'm afraid that if I don't do a disc now and experience trouble while I am upgrading I'll be screwed. Any suggestion would be appreciated.

  HP recovery discs is a completely separate process that the creation of a collection of 10 Windows. You cannot use HP Recovery Manager to create a recovery media for any operating system other than the original.

  You can download and create the Windows 10 for free from Microsoft installation media.

  https://www.Microsoft.com/en-us/software-download/Windows10

• Creation of recovery disks, (new)

  Hello

  I own a Compaq Presario CQ56 Notebook running Windows 7 64 bit I have owned for less than 1 year.

  Recently, I went into the Recovery Manager and ran the creation of recovery media to create backup diskettes.  She needed to complete 4 discs.  I bought new DVD-R discs.  The first drive was a success.  When I was asked to put in the next disc has not then I tried 4 times and each time it failed.  It's a long process, so I gave up for the day.

  A few weeks later I tried again.  The problem that I ran was this recovery media creation began where he left off and began to drive 2.  I had no idea he would do that and unfortunately I threw the 1st disk successfully a few weeks earlier.  I was able to create the last 3 discs but now I don't have the 1st disk... grrrr.

  My question is, is it possible that I can fix this and all 4 disks?

  Thank you very much

  Brenda

  

  Hello Brenda,.

  Sorry for your trouble create recovery disks, because you are still under warranty - please call the 1,800 HP Invent and request HP Recovery media and it should be free of charge.

  Kind regards

• Satellite A500 - problems with the creation of recovery disks

  Hello
  I bought a Satellite A500 yesterday and now I'm trying to create the recovery discs before anything else.
  However, towards the end of the 1st DVD I get an error message saying "Faile dto open the next file. e:\Boot\BCD (0201123-F1-00000000 error code)"and then when I click 'OK', the DVD is ejected giving a message"unable to create recovery 1' media. Physical examination, I noticed that the DVD is written almost entirely.

  Any advise on this? In addition, in the interface, it shows a USB option and says to insert a USB media with more than 7 GB of free. That I can use it to create the recovery disk? If Yes, when I reinstall windows 7, this allows as a bootable drive?

  Greately appreciate any help on this matter. If it is defective, I want to return as soon as POSSIBLE.

  Thank you
  Mercier.

  As far as I know, that you can not use external device for recovery, it is therefore very important create recovery DVDs.

  Try to create the recovery disk using only DVD-R media. Use high quality media like TDK or Verbatim.
  Last month, I've created on the Satellite A500-157 recovery discs and everything went well.

• Creation of recovery disks after upgrading to Windows 7

  My laptop was provided by Toshiba with Vista. He was eligible for a free upgrade to Windows 7. I did it. Problem is that the recovery disk is for Vista.

  How can I do a recovery for my laptop disk, because it is now the Windows 7 operating system?

  What folder of hard disk image:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If this option is still available, you can restore Vista and make a recovery disk.

• Creation of recovery disks on a Satellite Pro L300 running XP pro

  Hello

  you want to create a recovery disc for my Satellite Pro L300. Operating manual provides instructions for Vista but the machine comes with XP Pro.

  Can anyone help?

  Can you please send the exact model number? I just want to check the specification.

  Anyway, as far as I know this model was supplied with preinstalled VISTA 32 bit BUSINESS and WXP recovery DVD. You always have this DVD?

  I m not 100% sure, but I think that WXP had no option for recovery disk creator. The whole story started with Vista.

• Creation of recovery disks ends with the error message

  I tried to create a recovery disc but got this message "cannot read the following D:\06491XP file. Water hydraulics Error Code: 020150-20-00000000 "at half way through the first DVD disck.

  That means and what I can do to create a recovery disk?

  Thanks for your help

  Hello

  You have linked to burn using TDK or Verbatim DVD-R? You see, some media only good acceptt cd/DVD burn :)

• Pavilion DV6809WM: Creation of recovery disks

  Hello

  If I create "Disk recovery" after other software has been loaded, the recovery disk includes additional software? Or what from the recovery disk partition?

  Thank you

  RoDnSuE

  Hello

  Recovery media is essentially a bootale copy of the recovery partition and will not include any software etc that was added because you bought the machine.

  Kind regards

  DP - K

• Satellite L300D-12I: error of calibration of power while the creation of recovery disks

  I have a laptop Satellite L300D-12I & get a "power calibration error" when trying to create Toshiba recovery disks. Does anyone have any ideas how to get over this?

  Power calibration error especially if the laser lens cannot calibrate (moving) in the right position and can not handle the inserted disc.

  In most cases, the STRANGE must be replaced. :(

  I put t know why it happened on your L300 but I hope that your warranty is valid
  So contact the ASP as soon as possible and ask for the check!

• Creation of recovery disks without the ability to boot - Satellite L300

  Hello!

  I have a Toshiba Satellite L300-139 (Vista, 160GG, 2 GB of memory).

  Hard drive has been damaged (when Vista starts, the system won't start at all, and each time only a white screen with the mouse arrow is shown--> tried all the choice + start PE etc but there is no access to the Recovery Console) and it doesn't have the ability to run the CHKDSK command to resolve this problem.

  No recovery disk was created when the computer was new.

  I removed the hard drive laptop and plugged into my desktop computer, but 2 partitions on 3 were damaged, and I managed to recover data, including:

  c:\Program Toshiba
  d:\HDDRecovery

  Data recovery was made using www.sysresccd.org and external USB hard drive.

  I copied all the data on the USB drive and run program TRORDCLauncher (run as administrator). He didn't he removes my vista DVD player and it fails with the error (rough translation):
  "Another process is using the drive or there is no available disks. Check the status of the drive. [OK] »

  It seems that the recovery of the Images have been created with Windows PE 2.0 tools (Imagex), but that the data is spread around the files I was able to manually create the recovery disks.

  Ideas and knowledge how to create diskettes of recovery with this data, what I have or what I need to order the DVD and wait a few weeks before sunrise to new system?

  Thank you!

  -L

  PS.
  If anyone knows a nice solution for Microsoft CHKDSK running to my computer, I would be happy! Tried: PE starts (versions of Vista and xp) + all recovery methods that were available in my computer... a Simple boot with sata support and run CHKDSK ISO image would be nice!

  Sorry but there is no chance that you can create recovery DVDs. Recovery DVDs can be created if you use creator only Toshiba Recovery tool and unfortunately there is no way to do it.

  Using F8 HARD drive recovery procedure can work only if the HARD drive configuration is not modified (new operating system installed), the HARD drive recovery folder must be placed on the second partition.
  So with short words, you can do this only if the laptop to factory settings. Now, you can't do anything other than the original new order DVD of recovery for this model of laptop.

  If you want to do this you can order under https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• Solution of workaround for the creation of recovery disks!

  I have a Compaq CQ50-110US (5-6 years) running Windows Vista service pack 2 (32-bit with 3 G of ram) and I never did the partitioned hard drive recovery discs and as I would like to add a larger HARD drive I'm making them. I tried to do and as soon as I begin the process immediately, he goes to "Cancel" mode, even though I did not choose Cancel. I found the advice of HP to turn off UAC (user account control is what this means, in my view) and have chosen to disable this feature, but it seems does not make the difference because he always goes to 'Cancel' and it does not change if I have a blank media disc in or on a usb flash drive. My only question is, are at - it alternative workaround to get it do not jump right to the screen to cancel it or have a free program that will do it more easily. If I have omitted any information that could help forgive me being a novice to this is my kryptonite and I'm better at some hardware upgrades. These are the questions of software that suck when it goes the instructions say fine, thank you.

  Sorry I have never seen this behavior and have not the slightest idea. You can order your Support page recovery disks. Scroll the list of the drivers/software to see the command option.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3752689#N1339

• Which disks are accepted during the creation of recovery disks?

  Hiya

  No one knows the answer to this question. I just bought a HP Pavilion dv3-2310ea and wanted to create recovery disks, as shown in the installation instructions. I used Verbatim DVD - R 4.7 Gb 16 x 120 min and the laptop wrote things on the disk, but it cannot check in the end. Thus, none of the recovery disks is possible.

  I got fed up with the purchase! There is no indication on what drives exactly may or may not be used. It's a waste of money, nothing else, the inserted disc cannot be used for anything else.

  Help, please.

  Thank you.

  Sony DVD + R is one I always get good results with and recommend here often. A search of the forum should increase several posts like yours where it has solved the problem.

  Or, as suggested_contact HP and tell them your effort failed and ask a set to be sent. HP used to send em free in this case if you are still under warranty... not sure if this is still the situation.

• Creation of recovery disks when Windows 7 does not start

  My sister's hard drive is in imminent failure on HP G60-535DX laptop. Windows 7 does not start. I need to make recovery disks. I was able to save info goes into System Recovery Manager, but I don't see an option to create recovery disks to install the system on a replacement hard drive. Is it possible to create diskettes or order?

  Thank you

  Nanila51

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• creation of recovery disks after the upgrade to windows 8

  I already install windows 8 pro RTM I get MSDN, but I forgot to do the recovery disc.

  I want to know is possible if I now Windows 7 recovery disk? Which means that when I upgraded to windows 8.

  I already check using the Recovery Manager, and he needs 5 DVD-R for recovery, - is this normal?

  Hello

  Yes, normally you need 5 DVD. I believe that you always C:\Wndows.old and you can use it to go back to Windows 7 to Windows 8.

  Kind regards.