Creation of Setup always ask to insert the CD disk

Hello

I am trying to find a way if I can avoid the situation of having to re - insert several CDs while I'm creating an installer at all times. I previously installed all the software on the disk device driver and the original labview application disc (CD it ask me to insert), but I can't seem to move from a generation without having to physically put the CD in the machine.

Any ideas out there?

Thank you very much
-Ted

Hello Ted.

The installer LabVIEW constructor stores the location of the Installer MSI that you used to install the package on your system by default. When you go to build and Installer, it tries to copy the MSI from the same directory, in your case, it's the CD. There are several ways to work around this problem. The first is to copy all setup programs on the CD to your hard drive and install it on your system to your hard drive. The second is to change the setting of the Installation Source location in the section other installers for your build specification. You will see that it points to your CD drive, but you can change it to any place that contains the valid files.

XAQ

Tags: NI Software

Similar Questions

  • Qosmio G40-108 - prevent recovery of product disc ask to insert the disc

    I have a Qosmio G40-108 and it works fine even if the disc is not read discs any longer, perhaps because of a motherboard failure that I replace the disk with a new of brans and it still does not work, but my problem is the following... I have the product recovery disc, I tried to copy it to a USB key and reinstall the OS from USB and the start of software loading a page with the logo Toshiba asking to insert the recovery disk into drive F: I can't use is more like it's broken. How can I prevent the disc from asking to insert the disk into drive F:? There are lines on the laptop recovery disk to install the USB without using the disc?

    I managed to install a generic Windows Vista 32 bit downloaded from a Web site and my serial key works with it, but I really want to reinstall the original software
    P.S. Recovery of product is for Windows Vista Ultimate 32-bit and just in case there is also a serial number of the disk GMR400766ENG

    I don't have any experience with this, but I found an interesting article on creating recovery USB - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

    Maybe you'll be able to create the USB stick recovery. Check it out.

  • I renewed my subscription for photography package is monthly paid, annual. But im not able to open photoshop always ask to renew the subscription. Can someone help me?

    I renewed my subscription for photography package is monthly paid, annual. But im not able to open photoshop always ask to renew the subscription. Can someone help me?

    Hi John,.

    Please see: -.

    'Renew your membership' message when you start an Adobe Creative Cloud application

    Creative cloud applications ask me to connect whenever I run an application

    Hope this helps!

  • relocation of cs5 or cs3 both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5 but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my

    My computer crashed and I tried to reinstall cs5 or cs3, both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5, but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my copy of CS3 same results. Then I tried CS2 it installs and works, but cannot activate online and the phone activation is no longer available it tells me to check the forums?

    First of all, that the software is old enough so that it does not at all with Windows 10... but

    An idea that MAY work to install or run some programs in Windows old 10

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    CS2 (or earlier version) software activation server replacement

    NOTE that CS2 will not install on a Mac "modern."

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  • Stop/Fix "Please insert the last disk of all selfextracting and click OK to continue.

    (With the help of Win 7 32 - bit update)

    I have not used a disk of 3.5 inches for many years.  In addition, I have not used any device (USB, CD or DVD) that has / had problems of "whole selfextracting.

    Also, AutoPlay was disabled on my system for years.

    That said, whenever I do a search of file/folder I get "Please insert the last disk of all selfextracting and click OK to continue.

    How can I be to determine:

    1. What causes the error message and/or
    2. How to stop it forever!

    Thanks for any thoughts or ideas!

    DennisCPA

    Don't know if you've discovered this done yet for you, but I would say it is your usb flash drive. It happens when he is out BEFORE you used the 'Safely remove' icon on the taskbar.

    If it is, then you must copy any information on the USB key to another location and format the USB. Then you can copy the info on it and you're right to go!

    This will continue to happen sometimes even though you have the properties/policies defined in a quick deletion. I got mine the value of the radio button performance and ALWAYS use the icon REMOVE safe in your taskbar. Once you find that your data will be corrupted if is not removed properly, even if the ssd is supposed to be "hot." If you have a usb key that has a light on it, wait for the light to STOP BLINKING before removing it. If you do not have a light on this issue, it is always advisable to wait a second or two after the popup window say you that it is save to remove your USB.

    See you soon

    Glenn

  • I lost my backup for windows xp home disks and now my computer asks me for the startup disk. Is there anywhere I can download the file on a dvd?

    Windows xp starts

    I lost my backup for windows xp home disks and now my computer asks me for the startup disk.  Is there anywhere I can download the file on a dvd?

    Hi DrKathy1950,

    ·         Did you do changes on the computer before the show?

    ·         When she asks the startup disk?

    ·         You get the error message?

    ·         Are you able to boot to the desktop?

    Answer with the information required to help more.

    For reference:

    How to replace Microsoft software or hardware, order service packs and replace product manuals

  • NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

    I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

    NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

    any help would appreciated more than you know

    Hello

    Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

    If your laptop is still under warranty, contact HP and arrange for the disc replaced.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  • TrayApps Message - the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the TrayApp disk and click on 'ok '.

    Original title: TrayApps Message

    I get a message, "TrayApp" - the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the TrayApp disk and click on 'ok '.

    Hi BobKern,

    Follow the steps listed in the article mentioned below to solve the problem:

    Resolving MSI startup errors

  • How can I do to repair Windows Vista if I don't have a disk drive & asks me to insert the Windows disk and select Repair.

    I have a netbook with no disk drive that is running Windows Vista.  When I try to turn it on, it tells me that a file is missing or damaged and that I have to install my Windows disk and select repair.  Seeing that I don't have a hard drive on my computer, How can I do to repair vista windows?

    Hello

    Netbooks have the option to reinstall the operating system to when it was new.

    They have a recovery Partition on their hard drives the same as most laptops and desktops...

    You should ask the Netbook Manufactuter for particular key sequence to begin a recovery.

    Some manufacturer's instructions are to press F10 or F11 at startup; others are Alt + F10, etc..

    The installed software doesn't have knowledge written in programming to realize that you have a Netbook and you are unable to insert the disc. That's the way it is written, unfortunately: one size.

    And some more expensive Netbooks now have a DVD player.

    See you soon.

  • Computer keeps asking to insert the CD to burn, but it's already there

    I want to burn cd's and when my computer says to insert the cd again, then opens a small window indicating that I need to insert the cd. " So I did not

    understand why the computer is asking for me to insert the cd with the cd player already.

    The following links may be worth a visit:

    (982116) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
    (Windows XP / Windows Vista / Windows 7)

    Windows Vista - the problems of the CDs or DVDs
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

  • Re: Problem installing CS6 asking to insert the disc, but install office

    When everything will install mastercollection between asking continue it.

    Please insert the disc AdobeMasterCollection6-EnglishJapan to continue (press subsequently again ask)



    I toal 3 drives c, d, e, all mastercollection software stored in the disk d... where I'm wrong please give suggetions

    Branch to a new discussion.

    Rameshk95808743 if you are be prompted to insert the disk during installation then please download a new copy of the Creative Suite 6 installation files.  The installation files for the Master Collection CS6 retail are available to applications to download Adobe Creative Suite 6.

    We invite you to update this discussion, if you encounter additional errors after downloading the installation files again.

  • HP Pavilion dv6000: ask an insert the HP Product Assistant Disk window whenever I start.

    I have started to repair Vista but decided that it was unnecessary and did not follow through with the help of the ERD.  Whenever I start, a window pops up telling me to insert the support HP disc in the CD drive. How can I stop it from appearing?

    Thanks to anyone who responds.

    Doug

    Hello

    Please follow the instructions.

    Honestly, I'm not 100% now, but we will test - it should be one of the following.

    Please, start new Autoruns (as admin). Be careful and find these entries - after uncheck them:

    + "HP Health Check Scheduler" "HP Health Check Scheduler" "Hewlett-Packard" "c:\program Hewlett-Packard HP health check\hphc_scheduler.exe" «2008-10-09 05:56 ' «»

    "HP Software Update", "Hewlett-Packard" "hpwuSchd Application" + "c:\program HP HP software update\hpwuschd2.exe" «27/04/2010 01:58 ' «»

    + "HP Digital Imaging Monitor.lnk" "HP Digital Imaging Monitor" "Hewlett-Packard Co." "c:\program Hewlett-Packard imaging\bin\hpqtra08.exe.

    + "Vongo Tray.lnk" "InstallShield" 'Macrovision Corporation' 'c:\windows\installer\{8c3ae2d1-854d-4650-a73d-c7cc7ee36b80}\newshortcut2_db7e00c96def489a8112d8f81614f45a.exe' «2007-01-19 23:15 "«»

    + "\HP" health check "HP Health Check Scheduler" "Hewlett-Packard" "c:\program Hewlett-Packard HP health check\hphc_scheduler.exe" «2008-10-09 05:56» "»"»

    + "\HPCeeScheduleForDouglas Depue" "CEEment", "Hewlett-Packard" "c:\program files\hewlett-packard\sdp\ceement\hpcee.exe" «23/03/2007 14:23 "»

    + "Com4QLBEx" "Com for application QLB" "Hewlett - Packard Development Company, L.P." "c:\program Hewlett-Packard HP quick launch buttons\com4qlbex.exe" «2010-01-12 07:53 ' «»

    One of them is probably related to the problem you see. Unchecking in Autoruns will prevent them from starting. Once you're ready, reboot your computer (restart, not stop and start again).   Please, report your findings, didn't this come back after that?

    Something unrelated to the original problem - I see that you have installed a software IOBit - these come with a very low reputation and the level of protection they offer is very low compared to competitive suppliers. In addition, they were taken to cheat and steal things propretiery by other sellers. Personally, I recommend you to uninstall them and replace them with something better like ESET, Kaspersky, etc...

  • Trying to rip from CD the reader Windows (Vista). Player Windows keeps asking to insert the CD when the CD is already in the drive. CD is playable in drives E and F.

    Ripper Media Player (Vista) guard display the message "to begin to insert the CD in the drive audio."  Windows Media player does not recognize that the audio CD is in the drive. How do I solve this problem?

    Hi, BGNG,.

    1. were you able to rip the CD of Windows media player before with no problems?

    2. did you of recent changes to the system?

    You can read the following article to change the location of rip and see if it helps.

    Change settings for ripping

    Hope this information is useful.

  • Windows asks me to insert the recovery disk when that I start.

    Original title: Microsoft Windows Vista Recovery Disc

    I have a samsung computer. I recently had a virus attack, lost all my photos. My computer then shut down (i think) and now when I turn it on she prays for a recveory disk (microsoft windows vist I think), I can't find. Is there anyway that I can buy this record? And if I do, my photos will be recovered? Or, is there another way to recover my lost photos? Thank you!

    Hello

    Here are the different ways to reinstall Vista

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    ____________________________________________________________

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    __________________________________________________________

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    ____________________________________________________________

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

    ___________________________________________________________________________

    Data recovery

    1. remove the hard drive and it slave in another computer

    2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

    3. try Knoppix

    http://www.Knopper.NET/Knoppix/index-en.html

    BUT this method 3 depends on your hardware in the computer that failed

  • Problems become more problems... DISK BOOT FAILURE, INSERT THE FLOPPY DISK AND PRESS ENTER

    I recently had a question on my toolbar menu and begin to disappear.  While I was trying a number of different ideas through forums, I myself in another problem.  Now my computer boots but windows never start I just get a screen saying: "FAILURE of STARTUP DISK, INSERT the DISK AND press ENTER.  It worries me because my computer never came with a CD-ROM it was all preloaded when I bought.  Can anyone help, thanks

    Home premium Windows Vista, 64-bit operating system

    Hello

    Here are the different ways to reinstall Vista

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    ____________________________________________________________

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    __________________________________________________________

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    ____________________________________________________________

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

Maybe you are looking for