Creation of system restore

Similar Questions

• Disable the creation of Automatic System Restore Point? -SOLVED

  Is it possible to disable the automatic creation of System Restore Point (to prevent Windows to create points of food every day and after (re) install programs / Windows updates)?

  I want to manually create System Restore Points because the automatic creation uses too much space, because I install new programs very often.
  Note that I still want to use system restore. I don't want it to be automatic.

  Hello

  Well, Yes, you can shut down the computer to automatically create restore points by disabling the system of protection under the system restore. System protection is a function that creates and records information about your computer's system files and settings regularly. The system protection also saves previous versions of files that you have modified. It saves these files in the restore points that are created just before significant system events, such as the installation of a program or device driver. They are also created automatically once every seven days if no other restore points were created in the last seven days, but you can create restore points manually at any time.

  Again, I suggest you to create a restore point when you turn off system protection. Basically, to store restore points, you need at least 300 megabytes (MB) of free space on each hard disk with the system on Protection. System Restore can use up to 15 percent of the space on each disk. As the amount of space fills up with restore points, System Restore deletes older restore points to make room for the new. The system protection, the feature that creates restore points, is enabled by default. We recommend that you keep System Protection turned on for all hard disks that contain important files so that you can use system restore if you need to.

  Check out the link to disable restore points:

  http://Windows.Microsoft.com/en-in/Windows7/turn-System-Restore-on-or-off

  For more information, you can take a look at this article as well:

  http://Windows.Microsoft.com/en-in/Windows7/system-restore-frequently-asked-questions

  Do not hesitate to ask if you have more queries on Windows.

• System Restore question

  Vista OS 32 bit Home Premium with Vista SP 2

  HP Desktop

  I had removed Java 6 update 22 of my system using the uninstall program. After that I removed and restarted, I also manually removed the remaining elements of the Java/Sun of drive C.

  Do a system restore to a retore point before the kidnapping, give me all these files and folders back?

  but for a program that has been updated such as java? Like not the java of origin

  He'll be back this program to the State it was in during the creation of system restore point. teengeek.freehostingcloud.com

• Trying to expand the space system restore automatic gives error 0x8007007B

  I just had a problem with a driver and wanted to use system restore.  To my great regret, my computer did not a single restore point.  When I went to do it manually, I found that its maximum use was 0% for the restoration of the system in the C drive.  I tried to increase it, but every time I press on apply or ok (an increase of any amount) the following message appears:

  "Could not apply the settings for the following reason: the file name, directory name or volume label syntax is incorrect." (0x8007007B).
  When I press ok, he said: "there was an unexpected error in the property page: (same message as above).»  Please close the property page and try again. »
  I've done the obvious reboot and so on, and it allows me to create a manual restore point, but won't automatically set restore points or be it me to increase the disk quotas.
  Any help would be greatly appreciated.
  (I use a clean install of Windows 7 Professional 32 bit, on a 3 GHz Pentum D, 1 500 gb SATA I partitioned the drive, 4 GB DDR2 and standard components, no software or special equipment).

  Hi sss68,

  Welcome to Microsoft Windows 7 answers Forum!

  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error , perform the following solution:
  To set the path of the appropriate Windows 7, restore point as follows:
  1. click on start.
  The Start Menu appears.
  2. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  3. click on continue.
  The System Properties window appears.
  4. click on the System Protection tab.
  5 under automatic restore points, clear all invalid location or duplicate
  6. click on verify drive C: with the Windows Logo
  7. click on apply, and then click Ok
   
  Create a system manually restore point:
  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.
  4. in the System Protection dialog box, type a description, and then click on create.
   
  Follow the document below for additional guidance on the creation of System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• Problem trying to launch system restore error "the creation of a shadow copy has expired. Try this operation again. "

  The creation of a shadow copy has expired. Try this operation again.  That's what I get when you try to run the system restore.  What can I do?

  (Moved to programs)

  Solved my problem by running the restore of the system in safe mode.  This problem was caused by a Microsoft update that plays well with Windows 7 - it put an end to all parts of Windows troubleshooting and caused this problem of system restore.  I suspect that it also created some havoc with Silverlight too.  So, before launching system restore I changed the way I let Microsoft give me updates - now they can download, but not unless I let them.  Of course, I have absolutely no way of knowing what updates to install and which not to install, I think that I will not install anything unless I 'hear' some chitter-chatter on the net something.

• Xp system restore Creation can point before the current date?

  Family XP has create system restore points ahead of the current date.
  The date of the day was may 5, I restore dates back to the 7th by May 23.
  I don't check June or July.  What can / would be the cause for it?

  Thanks for any help,

  Hello

  ·         The time and date is set correctly on your computer?

  Method 1:

  I suggest you refer to the article below and check if it helps:

  How to set a system restore point in Windows XP

  http://support.Microsoft.com/kb/948247

  Method 2:

  Also make sure the time and date is set correctly before the backup. Refer to the article below:

  How to synchronize the time with the time service Windows in Windows XP

  http://support.Microsoft.com/kb/307897

  Hope this helps,

• System Restore does not start and the creation of a shadow copy times out

  What should I do if the system restore does not start, when creating a shadow copy times out?

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. What is the accurate and complete error message you get?

  I suggest you try the steps suggested by Gokul T on September 8, 2010 and see if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/system-restore-will-not-start/16c201d3-3932-40e4-883C-502f701b077f

• Hall 20: I can't do a system restore to overcome the refusal of the system to accept the password.

  I did a restore to factory on the Pavilion 20. Pressing me F11 has troubleshooting screen and I chose the system restore. All right

  I set up the UserName Admin and the password carefully (but don't think to do a password recovery disk).  I installed a different AntiVirus Norton application, a default value.  So I uninstalled Norton.  It required a reboot to complete uninstallation.

  This is where my problems started.

  Upon restart, the computer will not accept the password!  There is no mistake here.  It was carefully designed and entered in the creation of duing twice.  I even considered perhaps that I soon take my finger on the SHIFT key (twice) then tried many variations of SHIFT or no change for the capitals and even the next character in the password.  I restarted 50 times trying to get just one time and then I would like to choose a new password for connection.
  
  For the next, I thought I could just do a restore of the system from zero and re - configure again.  But now there is no option for me to use the system recovery.  This option is missing!  I spent many hours on searches of google for similar problems.  It's just not there.  I tried to use F10 and F11 to enter the system recovery.  I get to the menu troubleshooting and it has 3 options: Refresh uoir PC, reset your PC options and advanced.
  Clicking on advanced options gives me the system restore (a restore point (doesn't) usung) System Image recovery, startup repair, command prompt and UEFI firmware settings.
  
  I'm positn gthis in the hope that I can do a system recovery to the command prompt.  Is this possible?  If this is not the case, how can I do a system restore when the OPtion is not avaiiable?

  My question is: a complete system recovery was done, why it is no longer possible to

  Hello Newton51

  It will display the number of full model of the computer.

  I don't know what happened on your system but when you do the reset of the system, don't go not advanced.

  You should be able to click on reset your PC. That will erase the C: partition and reinstall Windows.

  

  When its finished, and you get to the part where it asks you to create a password for the user, LEAVE BLANK.

  Restart to make sure you can connect without using a password.

  IF you succeed at this stage, create your HP Recovery Media via the HP Support Assistant.

  If you enter an impasse once again, recovery media will wipe the drive and reinstall everything, including the recovery partition.

  NOTE: HP will allow you to record only one copy of the recovery media, so not to interrupt the process when you start.

  Now remove Norton and restart.

  Install this that never new you want security.

  When you're done, go to your user profile and carefully create your word password but do not close yet.

  Create the key to reset password on a USB key.

  Now restart and test your password.

  You have a USB reset if it doesn't.

  ----------------------------------------------------------

  If you are not able, or do not succeed to reset the PC, you have two options. Use the MS media creation tool to create recovery media (from another computer).

  Then, reinstall Windows 8.1 and download your HP drivers and install them.

  Or

  Order directly the appropriate recovery of the HP Support media.

  Contact HP worldwide | HP® official site

  Choose the country you are. Choose Help, then to the House.
  Enter the full product number and follow the prompts to contact Support.

  Chat with an agent will ensure that you get the appropriate recovery media.

  Hope that helps.

• The system restore points, how can be stored/kept?

  I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

  In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

  And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

  Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

  Hey, Jose,

  I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

  I'll try to put your comments in quotes, with my response immediately after, flea.

  The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

  "Here are some reasons that XP will remove RPs.

  'http://support.microsoft.com/kb/301224 '.

  • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
  • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
  • No disk compression
  • Did not display the warnings system restore.
  • I do not turn off System Restore fo any player.
  • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
  • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
  • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
  • I don't think I'm under low disk space.    :-)
  • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

  "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

  http://support.Microsoft.com/kb/950249

  This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

  • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

  "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

  • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

  "If they are all absent, it always seems that a human element involved somewhere."

  • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
  • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
  • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

  "To answer your question:

  The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

  • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

  I'll certainly post the info you suggested in the post on the SP3 forum.

  "Do or do not. There is no test. »

  • "Luke, the force is with you." :-)

• Error code 0 x 81000101 is displayed. -Cannot create a system restore point.

  The computer is a laptop upscale just out of warranty (of course), running 32 bit Vista Ultimate SP2.  I can't manually create a restore point and the last created automatically was over 6 months ago.  The specific error is: "the creation of a shadow copy has expired.  Try this operation again. »

  I've read the previous post and answer a question similar (7-8 January 2010) and tried his recommendations 1 and 3, without success.  I wasn't number 2 because he was is not clear to me.  My computer experience has included the replacement of memory, disks, video cards, etc. and a large number of configuration of the software, but I'm not comfortable to change sensitive PC parameters, unless the procedure is clear.

  After two years of trying everything, I finally fixed my system restore using this WalterBerndlpost: check if you have a program called "XFast USB" usually installed with the provider of the card mother ASRock MoBo.

  When you try to create a restore point, it hangs on "creating a restore point," followed by the error message: "the restore point could not be created for the following reasons: the creation of a shadow copy has expired.". Try this operation again. (0 x 81000101) Please try again. »

  I googled and came across many others who had solved the problem of 0 x 81000101 by uninstalling XFAST USB. I was living the problem with ASRock Xfast USB version 3.0.28.

  I then uninstalled Xfast USB ASRock (xfastusb) and rebooted. This solves the problem of 0 x 81000101.

  NOTE: I tried first to upgrade to ASRock Xfast USB version 3.0.38, but once again received the error message. Remove on the Start Menu does nothing, given that a pilot that settles in your system. Uninstalling removes this driver

  Another example of these programs 'boost' is 'USB 3.0 push"ASUS, but if you don't have that kind of advice, but have any kind of"USB turbo-propellers"installed, you should always delete. They don't get along well with the Volume Shadow Copy service.

• Need to do system restore after you perform the most critical updates

  Since getting internet cable in January, and the creation of a network, I couldn't install more updates to Vista security on my laptop Dell for 5 years.  Every time I have download and install, the next time I start my PC, repair Windows startup program is displayed because Windows cannot start.  The only solution never finds it is to do a system restore, which of course gets rid of all the updates of security that I just installed.  An exception to this rule are the updates with a tool to remove malicious stuff.  Those who work.  And my works of Bit Defender.  But I'm heading out for big trouble not being able to do all the other critical updates?  What do you think is the problem?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  I suggest you to install the updates one by one and...

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/9b7aafc2-5e3c-4d2D-BC01-4b81d319922a >

  NOTE: any changes you make now will NOT affect updates already in the queue of the installation. For which is concerned about the automatic updates, you have already approved these updates.

  UTC/GMT is 07:30 on Tuesday, may 1, 2012

• How to change group policy for the system restore will create restore point

  I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.

  I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.

  How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.

  To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks.  Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.

  You can provide any help would be greatly appreciated

  Thank you

  Skyraider 33

  Hello

  You receive an error message when creating a new system for Windows vista restore point?

  Using the Group Policy Editor

  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,

  Follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

• Cannot create 0 system restore point error code 80070057 x

  Hello

  Please help me with this error:

  Today, when I do a manual create a system restore point, I received the following message "could not perform scheduled task for the following reason: parameter is incorrect." I do a sfc/scannow, but the process has frozen the audit of 100% and has not given any results. I have also uninstall the antivirus software and redo the creation but without success. Please let know me what I can do?

  Thank you

  Negis

  Hello

  Sorry for the late post. I don't try to back up or restore. I just want to create a restore point.

  Netherless, I followed the advice on this thread http://social.technet.microsoft.com/Forums/en/itprovistasecurity/thread/37160397-349e-4aa2-992e-1ffe58b5e51e and renamed the SR file in %windir%\System32\Tasks\Microsoft\Windows\SystemRestore to SR.sav and can create restore points successfully. So I create a restore point, a new SR file is created adjacent to the old (SR.sav)

  However, is it to let the SR.sav file remains in the folder or just delete it? Is it possible that renaming some files to offset it later?

  Please kindly answer. Thank you

  Negis

• in the group policy system restore

  When I try to start system restore, a message appears "restor died in grop polity" I did not know that Vista Home Premium has group policy

  1. click on start, run and type regedit.exe, and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  Delete the value DisableConfig
  Delete the value DisableSR

  3. exit the registry editor.

  http://answers.Yahoo.com/question/index?QID=20090417123324AAlUeXy

  http://www.Winhelponline.com/blog/restore-point-creation-disabled-by-group-policy/

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7 - How to create installation of the automatic system restore points

  After installing Norton 2010 Security Suite, my hp officejet pro 8500 printer stopped printing. When I tried to do a system restore, I found that I had only a restore point and that was created after the installation of Norton.

  Under XP, I had restore points created every day, automatically.

  How to configure the creation of automatic system restore points in Windows 7 Pro?

  Hello Mikeoncamano,

  Welcome to the Microsoft Answers site

  Turn on or turn off System Restore

  System Restore regularly changes made to your computer's system files and uses a feature called system protection to create restore points. System protection is turned on by default on the hard disk that Windows is installed. You can enable restoring the system for other disks by turning on system protection for these disks.

  You can not turn on protection system for a disc is formatted by using the FAT or FAT32 file systems.

  To turn on System Protection

  Open system by clicking Start , right-clicking computer, and then click Properties.

  In the left pane, click system protection.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Under Parameters of Protection, click the disk, and then click Configure.

  Do one of the following:

  To be able to restore system settings and previous versions of files, click on restore system settings and previous versions of the file.

  To be able to only restore previous versions of files, click only restore previous versions of files.

  Click OK, and then click OK again.

  Kind regards

  It will create automatically restore points when there are changes to the computer or Windows.

  Disable your Norton protection system and check if she created the restore point...

  Bharath
  Microsoft technical support