Creation of the debugging token error: file has already been signed

Similar Questions

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• How can I change the font size on a document that has already been signed?

  How can I change the font size for my entry on a document that has already been signed? It seems that Adobe will not allow this. Thank you.

  Hi jonathanh19241035 ,

  I would like to inform when, once the document is signed and then after that it does not to exchange with the font size if it's signatures is the digital signature.

  If its use fill & sign and then using the add-on Acrobat the size of the font of the entry can be change.

  Also, this can be done in Acrobat Pro not in the drive.

  Kind regards

  Christian

• Download the Debug token error

  I try to install the token of debugging on my device. I've added as a Test device with the password WiFi IP address and device. I also created a debugging token. When I try to download to the device (when the appliance is in Mode Token Upload), it takes a long time and I get an error indicating that the download failed - connection refused.

  I checked the symbolic debug information and everything seems fine. I also tried to download the token via command line, but I still get connection failed.

  Any ideas?

  Nevermind, after three days of troubleshooting, I was able to install it. It was just a problem of network.

• Can I find out if my hidden files has already been copied to an external drive?

  I want to know if any, if hidden files has been consulted or copied in particular. Is there any software to tell? I use a vista

  There is no way to install something now and do go back and tell you if yes or no files have been copied in the past.  It is rather likely, there are utilities that you can install now that that will follow for you by the departure, but having never been to this market, I can't say with certainty.  Search Bing or Google find these software fairly quickly if there is.

• Can I reinstall my CD of Windows XP SP3 on a new drive hard if the one in that it has already been installed is lost or stolen? It will be always authentic?

  I bought a genuine Windows XP SP3 CD (french version), installed and activated, it after finding that the windows came with my computer was a fake. A few months ago my computer crashed, and my father has taken recently to his colleague to repair. The guy stole my hard drive and replaced it with another one cause it new, my father will not understand it, but I did it, the hard drive, he gave a our files, but it was XP in English and a counterfeit version. Applications of now facing guys have lost another, so I intend to install my genuine XP CD on a new hard drive, is this possible? I mean if I do that it will still be authentic or will know it must get another cd (again)?

  Thank you, any help appreciated.

  Hello Haby-Habbes,

  If you have real hologrammed CD and certificate of authenticity, so you have the Windows license.

  Install it on the new hard drive. Good advice on all XP themes, visit the http://www.annoyances.org/exec/forum/winxp

• When I download CS5.5, I get an error message telling me one of the files has not been downloaded correctly, but there?

  I downloaded CS5.5 three times and every time I chose the set.up.exe file I get a message that there is an error in the download and a file has not been downloaded correctly, but everything has been downloaded and just went through.

  I thought about it thank you.

• command line to create the debugging token has problem with the bbidtoken

  Hello

  I tried to use the BB ID token to create the debugging token.  Following the instructions of the command line, I got an error.

  BlackBerry-debugtokenrequest - bbidtoken bbidtoken.csk - storepass mypassword deviceid - 12345678 dt.bar

  Error: Only RDK or COMINCO Signatures are allowed when using BBIDToken

  The token id BB must be correct, because I can use it to sign an application.  I can also generate the debugging token from Momentics.  I believe momentics also call blackberry-debugtokenrequest internally, but do not know what are his secret settings.

  Thanks in advance for any help.

  Tyler

  Try without the parameter of bbidtoken.csk - bbidtoken.

  Also, make sure you use blackberry-debugtokenrequest of the 10.2 Gold SDK.  Previous versions do not BlackBerry ID support chips.

• Install Acrobat 10 on Surface by 3 with the error "Error 1006, the volume of a file has been externally modified."

  When installing acrobat 10 on Surface Pro 3, had Error 1006 "the volume for a file has been externally altered', how to fix?

  Hi rickyf36983392,

  Try to install Acrobat X using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Kind regards

  Nicos

• ORA-19504: failed to create the file, ORA-00270: creation of the archiving log error

  Hello
  
  Oracle 11 g 2 on windows 7, I of primary and standby on the same system (learning).
  
  When I check on status of primary and secondary use under request it gives applied log is 'NO '.
  
  SQL > select sequence #, used from v$ archived_log;
  
  SEQUENCE # APPLIED
  ---------- ---------
  516 NO.
  517 NO.
  NO. 523
  NO. 524
  525 NO.
  531 NO.
  NO. 532
  533 NO.
  NO. 541
  544 NO.
  
  When I checked error on DB primary .he give me more erro.
  SQL > SELECT 'ID', 'DB_status' STATUS DEST_ID, EXCURSION place "Archive_dest', 'ERROR' OF V$ ARCHIVE_DEST WHERE DEST_ID < = 5;
  ---------- ---------
  Error Archive_dest
  ------------------------------------------------------------------------------------------------------------------------------------------------------
  1 D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG ORA-19504: cannot create the file «»
  
  2 STAND ORA-00270: creation of the archiving log error
  
  I checked the space on the system... is there enough free space on the disk.
  
  On primary DB (destination of the journal archive)
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
  More old sequence of journal online 564
  Log sequence archive 566
  Current log sequence 566
  
  On standby DB (list of newspapers of record)
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
  More old sequence of journal online 564
  Log sequence archive 566
  Current log sequence 566
  
  Please guide it's because of the destination of the journal archive even shared by the standby and primary?
  
  If yes how do I change the destination of the newspaper archive on standby DB?
  
  Thank you.
  
  Edited by: 977220 April 18, 2013 20:49

  change initialization parameter

• Cannot create the debugging token

  Hello world

  Being new to BlackBerry, but not to programming I wanted to create some apps, but that's where the problem began:

  I'm not able to create a debugging token.

  Momentics IDE using:

  Matching and signature succeeded.
  The message I get is: "error creating debug token".

  Thanks to the usr\bin\ tools

  I was able to create the file author.p12 to sign with blackberry-keytool
  But using blackberry-debugtokenrequest I was not able to create the debug token file. The syntax used is listed below (1). It tells me that devicepin is not found.

  Using (2) I get "error: the password of csk specified is not valid.

  Changes of "author.p12 path" - keystore adding nothing

  Adding the 'path of the bbidtoken.csk file' results - cskpass in the above error

  By using the token in the file .csk instead of the path the console does not complete the command and locks into place. (Ctrl + C still works)

  System 8.1 Win x 64, Java is x 86, used x 86 powershell for orders

  If anyone can help, that would be really appreciated.

  (1)
  BlackBerry-debugtokenrequest - storepass (-devicepin ) + []

  I use the old AIR SDK to create debugging tokens, but I also creates the chips on the command line, the call should be similar. That's what I do

  blackberry-debugtokenrequest -cskpass %1 -keystore %2 -storepass %3 -deviceId %4 newDebugToken.bar
  

  where

  %1 = password of the cskfile

  %2 = your keystore .p12

  %3 = password of the keystore

  %4 = the hardware of your device id as hex (don't forget 0 x)

  Also note that there is no «»

• Cannot create the debugging token (.bar)

  Hello

  A few months ago I got xxx.csj - RDK-client and client-COMINCO - xxx.csj and registered with blackberry-signer. I used them to sign my applications published in the world of Blackberry. Some time later, I registered author.p12, barsigner.csk, and barsigner.db in a place course and then reinstalled my Windows OS.

  Today, I tried to create the debugging token. If I run:

  C:\bbndk-2.1.0\host\win32\x86\usr\bin\blackberry-signer-s'inscrire - csjpin - storepass xxxxxxxx xxxxxxx customer-RDK - xxxxxx.csj customer-COMINCO - xxxxx.csj

  I get an error:

  Cannot save client xxxxxxx because there is no more the record attempts. If you are already registered with this server, you must restore your backup signing keys. If you do not have a backup of the key, then you can order a new set of keys at www.blackberry.com/go/codesigning

  OK, I have my author.p12, the barsigner.csk and the barsigner.db, so I tried:

  C:\bbndk-2.1.0\host\win32\x86\usr\bin\blackberry-debugtokenrequest cskpass - xxxxxx - keystore author.p12 - storepass xxxxxxxx - deviceId xxxxxxx debugtoken.bar

  I get an error:

  Error: Not yet registered to request debugging tokens

  What's wrong? How can I generate a debugtoken (.bar file)?

  Oops! My mistake, I forgot to copy author.p12, barsigner.csk and barsigner.db to the default location:

  C:\Users\\AppData\Local\Research in motion

• PowerCLI - an element with the same key has already been added ERROR

  Hello

  I opened a case with VMware on a problem using PowerCLI. And pretty well, they said that they do not support scripts... But the error is not related to any script. It is related to the first command I run against one of our Vcenter and we have 6 of them.

  Everything worked well until we went from 4.1 to 5.1

  I can connect to our VCenter fine, but the first command always give an error and fail to the powercli but the task still occur in vCenter.

  When it gets ugly, is we have several powershell script to maintain and automate our environment but now these script fail.

  Example, we have a script to deploy the VM model and then configure the appropriate hardware configuration and add Notes and custom attributes. But the script fails after that deployment so the rest will not run. It will be possible that deploy us to the first virtual machine.

  So for 'Band-aid' question, I added a line to my script to start a virtual dummy machine, to make sure that what is in the script will work fine.

  Error:

  PowerCLI C:\Program Files\VMware\Infrastructure\vSphere PowerCLI > start-vm vm - Server-m46

  Start-VM: 2013/06/26 11:57:05 Start-VM an element with the same key has already been added.

  Online: 1 character: 9 + start-vm < < < <-vm server-m46 + CategoryInfo: NotSpecified: (:)) [start-VM], ViError + FullyQualifiedErrorId: Client20_VMServiceImpl_StartVM_ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.StartVM)

  As far as I know, done to the PowerCLI VMware supports.

  I don't think they support the client script debugging, but the product PowerCLI itself is supported.

  I created a few calls myself in the past.

  What you see is a known problem, there are a few discussions in this community who has something similar.

• Could not get the debugging token

  What is the problem? I tried to generate a new token to https://www.blackberry.com/SignedKeys/codesigning.html and it's always the same problem...

  Get device PIN
  Device PIN: 2xxxxeea
  Request Debug token
  Error: Server returned HTTP response code: 403 for URL: http://www.rim.net/Websigner/servlet/PBDT-Waterloo

  I got it working at home, finally... I think I can get the token does not work on some servers transparent http proxy/firewall...

• Trying to do a simple REST, the security token error installation

  I'm trying to put in place a series of calls to API using c# .net. I have combed through the documents of installation, download the sample code from Github and contacted the support of Eloqua, but I can't seem to shake this same error:

  Eloqua security

  A security token that is associated with your session became invalid. This can happen if you open multiple instances of Eloqua, in different browser windows or tabs and then log out of one of these bodies. Please either close this window or tab or click here to log in again.

  I checked with Eloqua to make sure that my user name is configured to perform API calls. Now, I'm just trying to make an API call. Finally, I would like to add contacts, send emails and possibly to other activities through the API fires from a web application. I don't know if it's important, but I noticed that all of the code is a client application, not a web application. Is it possible to make API calls in code-behind to a .aspx page?

  The debug error I get is:

  System.Xml.XmlException: ' > ' is an unexpected token. The expected token ' "' or"'. " Line 3, position 62.

  This error occurs because the answer is the above HTML error message.

  Here's the code I'm running. It fires on a Page_Load handler on a .aspx page that compiles:

  var client = new Eloqua.Api.Rest.ClientLibrary. Customer (Instance, UserId, UserPass, 'https://secure.eloqua.com/API/1.0/');

  int emailId = 1;

  Eloqua.Api.Rest.ClientLibrary.Models.Assets.Emails. email email = customer. Assets.Email.Get (emailId);

  Response.Write (e-mail. (ToString());

  From: EloquaClient/Client.cs:

  public Customer (string site, user string , string password, string baseUrl)

  {

  BaseClient = new BaseClient(site, user, password, baseUrl);

  }

  From: EloquaClient/BaseClient.cs:

  public BaseClient (string site, user string , string password, string baseUrl)

  {

  Client = new RestClient

  {

  BaseUrl = baseUrl,

  Authenticator = new HttpBasicAuthenticator(site + '-' + user, password)

  };

  Client.AddHandler ("text/plain", new JsonDeserializer());

  }

  public T get < T > (int id, depth depth = depthletter) where T: RestObject, new)

  {

  var point = new {id = id} T;

  var request = Request. Get (request. ) Type of. Get, item);

  return Run < T > (request);

  }

  From: EloquaClient/Request.cs:

  internal public static RestRequest Get (Type , type, RestObject restObj)

  {

  restObj.type = restObj.Type;

  var request = new RestRequest

  {

  RequestFormat DataFormat=. JSON

  };

  switch (type)

  {

  case The type. Download:

  request. Method = method. GET;

  request. Resources = restObj.Uri + ' / ' + restObj.id;

  Break;

  case The type. Put:

  request. Method = method. PUT;

  request. Resources = restObj.Uri + ' / ' + restObj.id;

  request. AddBody (restObj);

  Break;

  case The type. Publish:

  request. Method = method. POST;

  request. Resources = restObj.Uri;

  request. AddBody (restObj);

  Break;

  case The type. Delete:

  request. Method = method. DELETE;

  request. Resources = restObj.Uri + ' / ' + restObj.id;

  Break;

  case The type. Search:

  request. Method = method. GET;

  var resource = new StringBuilder(100);

  resources. Append (restObj.Uri);

  if (restObj.id! = null & & restObj.id > 0)

  {

  resources. Append ("/" + restObj.id);

  } else

  {

  resources. Append ("s"); / / pluralize endpoint

  }

  var searchObj is restObj as ISearchable;.

  resources. Append ('? ') Search =" + searchObj.searchTerm +.

  "& count =" + searchObj.pageSize +.

  '& page =' + searchObj.page +.

  "& depth =" + restObj.depth

  );

  request. Resources = resource. ToString();

  Break;

  default:

  throw new NotSupportedException (type. (ToString());

  }

  return request;

  }

  From: EloquaClient/BaseClient.cs:

  internal T run < T > (applicationIRestRequest ) where T: ( new)

  {

  Answer IRestResponse< T > = Client.Execute < T > (request);

  if (answer. ResponseStatus! ResponseStatus=. Completed)

  {

  This is where it is throwing this error:

  ' > ' is an unexpected token. The expected token ' "' or"'. " Line 3, position 62.

  response to throw . ErrorException;

  }

  response to return . Data;

  }

  
  

  No idea where the code is a failure and how can I get this (supposedly) simple API call to return a value instead of a security token error?

  
  

  Thanks in advance.

  Nick
  

  Hi Fred,.

  I have cleared my cookies and unfortunately it does not solve the problem. Frank Shih to Eloqua stressed that endpoint was wrong ('REST1.0 ' rather than 'secure.eloqua.com/API/1.0' secure.eloqua.com/API/). I fixed who and receive is no longer the security token error. Now, I get a new error, but I'll make another post for that to keep things organized.

  Thank you.

  Nick