Creation of the disk recovery Partition recovery disks or HARD.

Similar Questions

• Computer automatically restarts and the disk driver hard name question.

  Original title: my PC has 2 problems

  Hi guys, I'm going to talk about my PC has 2 problems.

  1. The problem is when I turn on my computer and boot my system, after 20 minutes I'm playing games, it auto restart my PC several times. 2 weeks ago, my old diet was very serious problem and the cause cannot start my PC, so I bought one to replace. Until a few days ago, it worked with my PC. He still now, have the same problem, but that sometimes he can't start several times and then she came back to do it again. I thought that it will more work and not a problem. I am very nervous and furious...! >:(
  2. Another problem is that my drive hard(location is C:\), it cannot load my system sometimes as the first problem earlier. Not only that, when it is started my PC, I checked all my hard drivesof driver name(I have 2 HARD drive, everything is very old)right click on C:\, click 'Properties' and then click 'Material' tag for the driver name lists. I don't see a single HARD drive driver name(it's in D:\), not on C:\ Name of the driver drive HARD, but in 'My Computer', it takes C:\ icon to click. I don't know why a few months ago, it has worked until now, one is missing and we're still on the list of driver name.

  Hope everyone give me help.

  Hi Billy,

   
  1. do you get an error message/code?
  2. What is the brand and model of the computer?
  3. How many partitions on each disk hard you?
   
  -For the first issue with computer restart automatically, follow the steps in method 3: disable automatic system failure reboot from the link:
  How to solve problems of hardware and software drivers Windows XP
  http://support.Microsoft.com/kb/322205#M3
   
  If the problem persists, see the event viewer for the detailed error message.
  Follow the link for the procedure:
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427
   
  -For the second question, I suggest you to run a check disk and find if it helps.
  Reference:
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  Also check if all of the hard drive and the drive letters are displayed correctly.
  Follow the steps to access disk management:
  a. click on Start and then run.
  b. type diskmgmt.msc in the text box and press the enter key or press the OK button.
   
  If the problem persists, you can write to us and we will be happy to help you further.

• Portege Z30 - problems of USB - error Code 10 using the disk external HARD - SOLUTION

  Hello

  I wanted to just connect a problem and the solution I just got/found. It's about a Z30 with an installation of Windows 7 32 bit and a 1 TB mSATA SSD.

  I was unable to get any USB 2.0 drive Flash or any (if USB or USB 3.0) external HARD drive to work. They would try to install but I'd end up with a yellow warning triangle in Device Manager.

  After various attempts of a workaround - I spotted alongside the driver.sys and usb.sys load - there was a mysterious driver which I finally tracked down the wizard of related software.

  After uninstalling the magician - all USB keys and external HARD drive worked perfectly.

  Do not have this problem with an other Toshiba with a standard SSD EVO and magician - so not quite sure that the installation is triggered it.

  However problem now * solved.*

  Thanks for sharing!

• Laptop HP 15-f162dx: THEIR is NO OPTION of DVD FOR DVD RECOVERY DISC CREATION IN the HP RECOVERY MANAGER'S

  I HAVE HP 15-f162dx NOTEBOOK PC in WHICH I AM creating RECOVERY DVD DISCS IN "HP RECOVERY MANAGER", BUT in THE "HP - CREATE RECOVERY MEDIA" IS NO OPTION TO CREATE a DVD. EARLY CLAIM.

  CONCERNING

  Ok.

  I don't see that as a real issue or problem.  The ability to create a recovery media is part of the purchase, and you do not have the ability to create a recovery media.

  Why don't you use the option of USB flash drive?

  The USB stick recovery is higher on the recovery DVD disc in a number of ways.

  (1) a usb flash drive are not damaged by just scratching the surface, unlike the DVD in a set of recovery disks. A scratch on the side of disc label #1 and the whole is unusable.

  (2) a recovery, when from a usb flash drive takes less than an hour, so that once made with one set of recovery disks can take up to four hours.

  (3) not all DVD media can be used to create a reliable recovery DVD media.

  (4) DVD media can be easily destroyed by heat, if you live in a region of the world where the temperature is normally high.

  (5) usb recovery media creation takes less than an hour, compared to the time it would take to make a recovery of the DVD disc.

• Share the creation of the disk using VMWare

  Grid version: 11.2
  Guest operating system: Solaris 10
  SE host: Windows 7
  Virtualization software: VM Ware 8 workstation
  
  I want to install 11.2 IM on my laptop.
  
  I was under the impression that shared LUN for the installation of the grid can be created using Openfiler. But according to the document below, it is possible
  
  http://www.dannorris.com/wp-content/uploads/2008/04/2008_341_norris_ppr.PDF
  
  But Dan Norris said "+ VMWare Workstation has a limitation in the sharing of disk, it's one of the reasons we use VMWare Server (which has no such restriction). + »
  
  I don't know what version of VMWare Workstation speaks it. Is it possible to create shared LUNS using VM Ware workstation 8 (which I have)?

  You can create shared discs by editing the file manually .vmx (never tried on my good computer)

  or you can also use Virtualbox, which is free and supports the shared disks

• I formatted the disk.how hard to recover data?

  In my laptop one disc has been formatted there.i and he did two partitions at this point I do not copy some files. How to recover files?

  Hi jadunathhota,

  There is no Microsoft recovery tool to recover the lost data. However, you can use your favorite search engine and download any third-party data recovery software.

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• The disk cleanup hard disk, property Page is missing

  My button of disk cleanup on the property Page of all the hard disks on the general tab is missing for centuries.  Short of a reinstallation of Vista Ultimate x 86, we might want to know how can I get it back?

  Disk Cleanup works through other options available for the throw, but I miss my button, everyone has seen?

  I still have my representable pattern pink and blue used and free space on the drive, just no button.

  To the wire when I tried most of the troubleshooting steps based including SFC/scannow, ChkDsk, Msconfig, Safe Mode, different users and a few others, I probably forgot to mention, and does not.  There is a lack of information on the various web sites that I visited on this small inconvenience.

  Hi Linney

  Try this.

  Right-click on the Recycle Bin on the desktop and select Properties.

  If you do not have the Recycle Bin on the desktop, open Windows Explorer and look for him at the bottom of the Navigation pane.

  Recycle bin properties, make sure that the drive letter of the System Volume is selected. (Usually c :))
  If you have the 'c. do not move files to the Recycle Bin Option to remove files when they are immediately deleted"selected, and then select the other option. Click apply/OK.

  Check the results on the properties of drive of the volume.

  I hope this helps.

  Ronnie Vernon
  Microsoft MVP
  Windows desktop experience

• error volume generic when you try to install the disk driver hard ext

  I have a toshiba satellite laptop computer with Vista Home Basic and a WD my passport essential 320 GB external hard drive

  Here's the question,

  I got the update of WD Web, its installation site and on my computer work... will not install the drivers.  I go to the Device Manager and the drive appears as unknown device.  try to update driver software, and then gets all throughout this so-called - "windows found driver software for your device but encountered an error trying to install", and then below that theres a picture of a hard drive and next it is written "generic volume". then below that it says "this operation requires and the interactive window station.

  went to disk management, any option that I click on reassign a drive letter or to reformat I get various error messages.  basically the wtf.  Ive google the issue and the error message and have tons of similar problems posted by other people, but nobody has the right solution for me - tried so much.  I called windows, they were no help, sent me here essentially.  not called WD they have no help...

  Anyone have any ideas?

  Thank you!

  Hello fighclubber25,

  a. don't you make changes to the computer before having this problem?

  b. are the other USB devices work properly on your computer?

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  My research, I find that there are several problems with the Antivirus software when trying to install the drivers for the Western Digital hard drive. I suggest that you disable the antivirus software temporarily and verify if you are able to install the drivers. Also, make sure you download the correct version of the drivers.

  Note: Make sure that you enable the antivirus software after the test. You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Connect the drive to another computer and check if you are able to load the drivers. Just to make sure that the hard drive is not defective.

  You can also check out the link that will give you information on tips for solving problems with USB devices below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• the upgrade of the disk sata hard to new ssd sata 3 disc 1

  I have Hp m9510 running windows 7 64 bit home edition.  The motherboard is ASUS IPIBL-LB (Benicia), my drive sata hard existing 1 running in raid mode.  I want to add a new SATA of SDS 3 as a new startup disc and leave the player sata 1 existing as a backup.  Insofar as the motherboard is built for sata 1, if I install a sata pci card 3 I will then be able to obtain the transfer of higher data rates of the new ssd without causing other problems?

  If your current configuration has a single disc, then your default would be AHCI.

  RAID stands for redundant array or inexpensive disks and requires two or more physical hard disks for the implementation.

  In this case the preferred configuration would also be AHCI. It's a SATA mode. (Advanced host configuration interface) His replacement is IDE (emulation) mode

• The disk performance hard OS ESX influences the performance of ESX somehow?

  Hello

  Does the OS ESX (e.g. hard disk performance

  between SATA and SAS) affect the performance of the ESX somehow?

  (To clarify, I wonder about the hard drive that ESX is

  installed, not the hard drive that are the VMFS volumes).

  This information will help us determine if the benefit of

  faster disks to the ESX operating system outweigh the additional costs.

  Thank you!

  John

  Welcome to the Forums - there are two parts that the local disk speed will affect perfomance - during the startup of the ESX host, it will delay the start of the server ESX - the other begins as others have said if you do not set / the effective Service Console - what needs to be done to ensure your service console is configured approriately.

  1. Sevrice console the maximum value of 800 MB memory - which is then installing ESX you set space swap to 2 x 800 or 1.6 - GB

  2. When accessing your virtual machines using RDP or SSH, this will reduce the load on the service console

  3. Minimize running them something extra in the Sevrice Console-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Can not boot from the disk external HARD on the Satellite L100-130

  My os is Windows XP Pro Family Edition, when I create an image with Acronis image treu, put the image on the old HARD drive.
  Restart boot cd/dvd en, my system won't see ex H.-D.

  How is that possible?
  (SATELLITE L100-130)

  Please mail to:[email protected]

  Hello

  This question is not for the laptop manufacturer but for software producer.

  If you have two partitions copy this image to the second partition (D) and check if it is not visible. I do the same with the Norton Ghost image creator.

• The disk controller HARD Satellite L855-10U Sata 2 or 3?

  I want to change my HD to an SSD, but want to know if the controller is 2 SATA or SATA 3.

  Hello

  The laptop supports Intel HM76 express chipset.
  The chipset supports 2-port SATA 6Gbit/s. (SATA-3)

  However, we recommend to install a diagnostic equipment like Everest Home Edition or SANDRA Soft tool to get information on the pieces of your hardware.

• How to validate windows after the disk crash hard with or without pay for a new disk

  Hello

  Thanks for any help. My hard drive crashed after it overheated. Each attempt I used to reinstall or use a backup version failed because my hard drive could not be found. This disc that came with my computer was so useless. I had to go to a computer repair shop & buy a new CD with Windows 7 on their part. Now, when asked to reactivate it, it says my code is not genuine and is not even from America. I read in another message that a person would buy a CD to their computer manufacturer. I do now? I have the dang code for my original windows installation. It is right on the side of my computer Tower, but obviously it does not work as disc of the repair shop has a different code.

  Now that my computer is totally fixed, is it possible for me to try and reinstall my windows with the repair disc supplied with my computer when I bought it? Alternatively, I can reset my computer to its factory installation? Are these files on my computer since I have used another drive? I'm guessing that probably not. Thanks again for any help.

  Statistics of the computer:

  Windows 7 Home Premium 64-bit

  Hard drive: 1 TB

  Memory: 3 GB

  Processor Intel Pentium E58

  I'm pretty computer illiterate, so if you tell me to go to a certain place and type a number of keys, I won't be able to understand it, even with the simplest explanations... I'm sorry.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Problem with update of Protection of the disk on Tecra A8 - 10F

  I have a problem that the Toshiba HDD Protection Utility does not work and I do not know why.
  {I tried this driver and I've not found for Tecra A8 PTA83E 10F but I found for Tecra M9 (PTM91) Windows Vista HDD Protection 2.0.1.7 Utility) updated the site {(ptm91)-hdd-protection-utility-2.0.1.7-windows-vista-free-download.html http://www.opendrivers.com/driver/239805/toshiba-tecra-m9}
  I installed it in my laptop but the problem is that this utility does not protect to shock the laptop, I put all settings by default, and do not protect not always.
  Perhaps because the driver for Toshiba Tecra M9?
  So please can someone give me this Toshiba HDD Protection Utility software?

  You can send me to my email: [email protected] or give me the site address :)

  Note: I've searched this site on this driver it and I can't find :(

  Hello

  In my opinion the disk utility HARD does not work on your Tecra A8 because the software was not designed for the A8 but for M9.

  The European driver Toshiba page does not provide the HDD Protection Utility for Vista.
  But I found one for the Tecra A9.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Look for the utility of the disk protection HARD Tecra A9 on the A8. Maybe it will work

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.