Creative solutions to the problems of the Tablet
All I see on these forums are complaints about of bugs and problems. Complaint after complaint after complaint. Well, it's annoying, and I'm writing this, to ask if anyone has creative SOLUTIONS to bugs. Things that can make our lives as owners of Sony Xperia Tablet S, a little simpler, until the update takes place to fix some bugs and maybe make more bugs. We will see that a group of creative minds can achieve the things we got okay?
I'll also take ways CREATIVE to differentiate between the Tablet better, or simply more fun.
Hi RyanMelendez93.
Please return the exact issue with your tablet to have for the same troubleshooting steps.
Tags: Xperia Tablet
Similar Questions
-
I bought the creative cloud but the application still in a trial. What can I do to solve the problem
Hello
Please see the below help documents:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?
You have a corrupted user agent which identifies you like Firefox/3.0.11
- Mozilla/5.0 (Windows; U; Windows NT 6.1; UK; RV:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 WebMoney Advisor
See:
-
Problem to make a call on the Tablet mode.
Hi, I have the latest installed Skype (6.14.0.665) from the game store.
On a Lenovo tablet with Android 4.4.2
When the Tablet is in landscape mode, the call button doesn't seem to work.
The screen is not damaged - it does not work right up or upside (the soft turns).
I can very well use the call in portrait mode button.
Also, the video call button works in landscape mode!
I've attached screenshots to show the button of the issue.Can you help me?
Thank you.You beat me by 6 minutes borisk3...
Can confirm that this problem has corrected the non-operational call key.
Mike. -
I found the solution for the problem of sound-acpi with Satellite P100-219
Hello
I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?
See you soon,.
MIKHi Mik
As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.
-
Original title: Picture It Photo 2002
Recently, I upgraded my RAM to 1 G. Since 2002 the picture it will work, but immediately stop saying that it will inform me if there is a solution to the problem. Everything I read on this site, I think that the fix may be a patch. Question: anyone know how to get me to the patch?
Would appreciate it a lot! Thank you
This could it be? If not, Google more.
http://forums.CNET.com/7723-6136_102-301075/Microsoft-Picture-It-2002-crash-patch-for-XP-only/ -
I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Client to make VoIP calls
I recently started having problems, make VoIP calls from my computer. I use VoIP Busters (and using it for a few years without any problems). Evertime I try to call the destination phone rings a couple of times and then stop. The next thing that happens is an error message that says: "Client for VoIP calls has stopped working. Windows is checking for a solution to the problem. It is followed by another screen that says: "a problem caused blocking the program working properly." Windows will close the program and inform you is a solution available. " Nothing happens. How to overcome this problem.
I finally had to resort to the re-installation of Windows. This solves the problem. But don't forget to back up your computer and email address / addresses before you do.
-
1 - with regard to support USB connected hard drives that will not transfer data & like to come & go quite often of the view.
Everything seems like a joke to me, when I read that a lot of people have hard drives USB who worked for a year, & when it stops working or acts upward, we all have a test to see if it connects & works very well on our other connections PC/Laptop & the only advice given, this firmware is upgraded or a list of hard drives that have been tested and work on the E3000.
2nd - my other problem is that my E3000 now decides of its own to disconnect wireless & cable Communication and then reconnect alone, whenever you feel.
What makes angry of this problem is that it is abundant in the Forums & I tried all the fixes, but I still have the same problem & sound as good as this device of 2 year, Max is grilled. As is the case when there is a loose connection that overheated, in what thread or welded metal move when heat is added & move at the time where the heat is removed.
PROBLEM:
My touch 1 Maxtor (from the approved list) is connected and playing now you see me & now you don't game. If I ever try to import or to export any image file or music, the Communication goes & then sometimes will return its own. Working with Game Consoles, when something begins to work intermittently, then it is a hardware problem or software with the device. It is not a user error, when it worked fine before.
SOLUTION?: This is why we are all here. Thanks to a landmark of expert for the same problem that many of us have?
How about this solution. Why not let all E3000 owners send there wireless routers is not working towards a credit for a new operating model nice. I think that we would all save a lot of headaches & get rid of 25% of all calls for help on this forum.
Thank you for your attention,
BigdogTim7
PS. Please give us/me expert advice on how to solve the problem. If nobody knows the answer, then Cisco/Linksys looks really bad for selling a router high of $$$, being touted for the games and files sharing multimedia home & it only at this stage. If it should be recalled, will bring up by all means, or come up with a fully functional firmware.
Thanks again & hope to hear news good & productive, cause I am so tired of playing with this E3000 & will more than likely stay away from your product for any & all future purchases, no matter where you are ranked (E3000 was 3rd & best prices of the top 3 when I bought it).
Well, I'm here, not having heard an assumption about my problem, but to get an opinion of experts & solution to my problem, but also all other users of the same or very similar problems.
I am now a HAPPY 'Belkin N600 DB' owner for only $79.99 @ Wal-Mart/Radio Shack. This new does much more than the Cisco E3000 wireless router & even changed my Modem 100 MB (green) flow out of 1000 GB (Amber Light).
So, so HAPPY now!
Bigdogtim7
-
You have a support company or the name of Creative Solutions?
A company called just to technical support. Their name is Creative Solutions. They are a legitimate company that uses Windows?
A company called just to technical support. Their name is Creative Solutions. They are a legitimate company that uses Windows?
SCAM.
Do not respond. If the scammer calls once again, hang up.
Here is a list of tricks scammers have used... funny supportphone calls.
-
I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?
Hello
Make sure you have the latest network adapter drivers fron toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
and if windows update is at the origin of the problem change how to get updates to uncover the problem update
When you have found the issue, a right click on it then invited uac then hide
read the information on the link below
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
-
When I turn on the system of his displayiing on the moniter as NTLDR missing. Please give me the solution for this problem
Hello
NTLDR is not used for installation of Vista, it's a vestige of WinXP / 2K. If it is listed as "missing", then your boot sector is damaged and must be repaired. The steps are described here: http://support.microsoft.com/default.aspx/kb/927392?p=1
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Have had problems since 31/12/09. Tech replaced Dell hard drive 14/01/10 because all software solutions did not resolve various problems, including the screen black and white letters indicating the mode without failure, or count down the regular opening. System Restore has used several times, all software removed and replaced. New Quickbooks reinstalled two times 10, it usually starts up quickly. I was told not to turn it off, just let it run. It automatically goes into sleep mode, it still does not start correctly. Last message is that Windows has recovered from an unexpected shutdown; Windows can check online for a solution to the problem. Problem event name: bluescreen
Windows has recovered from an unexpected shutdown. Windows can check online for a solution to the problem. Problem event name: bluescreen.
Hi slopchop
In the last few days have installed new programs? Or Anti Virus?
Try the steps in this link and check:
http://support.Microsoft.com/kb/958233
http://support.Microsoft.com/kb/925810
Also refer to:
After back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
* Original title: software problems
Whenever I open my Kodak easy software, that he told me that he stopped working and no solution to the problem. How can I fix this?
To allow a person to better help you, can you provide more information please.
for example:
- What is the full name of the 'software kodak easy' AND its version number?
- Is it intended to be run on this version of Windows 7, or if it was originally intended for an earlier version of windows?
- What is the exact error message when it does not work?
- He has already worked on this computer? If so, when did it stop working?
If it is your program - http://support.en.kodak.com/app/answers/detail/a_id/36670/selected/true - it seems that it is no longer available for Windows.
If you have a 64 bit OS, it can help - http://support.en.kodak.com/app/answers/detail/a_id/30535/~/easyshare-software-on-64-bit-computer-running-a-windows-7-or-windows-vista/selected/true
If it ran on an earlier version of Windows, but will not work on Windows 7, try running mode of compatibility - http://www.sevenforums.com/tutorials/316-compatibility-mode.html - which may allow some older programs to run on a later version of the operating system.
-
Original title: games
When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)
Help, please. :)I just "uninstalled" pack of the accelerator, and it worked fine.
Maybe you are looking for
-
Satellite Pro A120 - ALERT: System protection failure.
Hello I had a problem after installing Windows XP SP3 and a new startup the laptop stop and asked: ALERT: System protection failure.Password = What should I do? I called service and they told me to send the laptop to the Toshiba Service.I don't whant
-
Problem with the background color of a disabled control
I have a few controls on the top a box colored and elevated. When I disable and gray (round button) control an adverse change occurs in the background color of the control-it gets surrounded by a grey version of the color of the raised area. I would
-
I create templates for Windows 2008 R2 the final step of each creation is a /oobe/shutdown sysprep. Once the template is cloned and booted up, we do an other sysprep /oobe /reboot. The second sysprep is supposed to be in order to change the SID... Qu
-
Disorder of the display - black and cut
Hello! I have a problem with the display of my Xperia, it started last week when my view stop responding and half got an image gray as when TV has no signal, sometimes after 2 minutes it works again, other times, and it's really annoying, the screen
-
Disable encryption of the user export packages
HelloWhen you try to import users, we get an error to v6.2. The error indicates that addictive "-unspecified" is missing. We believe that it is P4P enveloping the error in a kind of error handling, because we have all the data related to the user c