cRIO 9068 + Scan Engine Support error - even if it is installed on the cRIO, after the deployment of error says his lack

Similar Questions

• Adobe Flash Player 18.0.0.194 is installed, but the plugin check, it says that adobe Flash 17.0.9.18 is exceeded, even if I have the latest version of Flash.

  I have a bit of a problem that does not appear on another computer. I am running Windows 7 and on one of my computers in the office and it is visible in Mozilla Firefox Adobe Flash played being updated and overwhelmed at the same time. I have the latest installed flash player which is 18.0.0.194, but it is still announcing Adobe Flash Player 17.0.9.18 and says that it is obsolete. I checked my system with a few technicians as well and it is very clear that only Flash Player 18.0.0.194 is installed on my system for Internet Explorer and Firefox. We are at loss as to what is happening or why it shows this error. I don't even have Adobe Flash 17.0.9.18 installed on the system. With the computer always upward in the shop, after a week and make a ton of search in the forums, that we are all at a loss of what is happening. We tried to uninstall Firefox and reinstalling and that did not help. We also tried to uninstall Adobe Flash and reinstall a new version of it as well. None of them is the problem. Firefox reset as well didn't help either. Being that this happens only on one computer I think it's a very strange situation. Y at - there anyone out there who has an idea of what is happening and how to fix or is really something that can't be fixed? There is no virus on the system. Yes, I tried the update through the update button as well as trying to go directly to the site Adobe itself. Any help would be greatly appreciated.

  Well, I just thought about it all now, but I still want to thank you for your help. You'll love the answer too. I was literally looking at the plugin page and I saw 17.0.9.18 and I arrived just to scroll to the bottom of the page where he showed another application like 17.0.9.18. Guess what he listed as. Real Player. I uninstalled Real Player cloud of programs and it solved the problem. The problem is that stupid little icon appears as Adobe Flash up and in fact what we really know that for 17.0.9.18 is true cloud player. Boy, heaven's to betsy, if anyone out there has the problem I did I sure as hell hope it helps you too. Thanks again for your help. I use no loss anyway so no Real big Player cloud for me. XD

• The engine InstallShield (iKernel.exe) could not be installed. The system cannot find the specified file.

  I am running XP Pro and I am trying to install a program, and I get this error code: motor InstallShield (iKernel.exe) could not be installed.  The system cannot find the specified file.  How can I solve this problem?  Thank you.

  Hello

  · What program are you trying to install?

  You can check the link and try the steps listed: error Ikernel.exe when you install programs by using InstallShield: http://support.microsoft.com/kb/810608

• Photoshop CC 2015 just installed on the laptop with 4K display.  Lack of support for ADOBE?

  I bought this laptop to be used for graphic design, but demand main graphics (SUITE ADOBE) does not seem to support 4K?

  I had no idea.  but does not matter if ADOBE is not currently trying to support?

  Everything I've read ADOBE users, ask for help seems not to get answers on screen 4 K support.

  The interface is so small and will not work with scale of Windows.  2014 version supports doubling the display of the interface I think but not 2015.

  Everything here can point me in the right direction if there is hope for answers?

  Thanks in advance

  Hi ericam.

  Refer to this article: HiDPI and Retina Display support FAQ for Photoshop

  Kind regards

  Claes

• Unable to connect to old e-mail account, even if you try to reset the password

  I can't connect to an old e-mail account. I forgot the password, but even when I try to reset the password, it keeps saying that my "windows live id is incorrect", but it is not. My you tube account is linked to this old mail and it's really annoying! Please help someone?

  Hi Nzgal_01,

  When you use Windows live mail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://social.Microsoft.com/forums/en-us/category/windowslive/

• Why the new cRIO-9076 does not support the scanning engine?

  I spec'd a new chassis cRIO-9076 spiffy but learned that, despite its impressive capabilities, it does not support the analytical engine.

  I'm curious as to why this is.  I hope that this is not an indication of support OR away from the scan engine and perhaps NSV technology as well.

  OK, uninstalled and reinstalled OR RIO 4.0 and now all is well, guess it was just one of those inexplicable installation problems.

• cRIO - Scan engine's hybrid mode does not

  Hello

  I have a cRIO project in which almost all my modules must operate in mode of scanning (high density, low sampling etc. requirements), however I 9870 module that requires the FPGA interface, so I will try to get cRIO to work in hybrid mode. I followed the instructions in the article on this subject without success. At the present time, everything works perfectly if I leave the chassis in the interface in scan mode, but when I go to the FPGA interface (deploy the change, compile my FPGA vi, download the bitfile and restart the RT vi) none of my data values are updated, and it's not just that they are stable, the timestamps on them are all zeros. The RT is Scan Engine State VI says the scan engine is in Active mode, but still it behaves as if it is not. Any suggestions?

  Thanks for the help,

  Jon

  Hello Jon,

  Can you explain your configuration a little more in detail?

  When you say download the bitfile tell you download the bitfile blinking to run at startup?  The FPGA VI is set to run at startup?

  Your code RT has an 'open FPGA VI reference' calling in?  If not, can you try that one?

  You are able to communicate with the 9870 in hybrid mode?

  Thank you

  Sebastian

• Scan engine access on CRIO protection?

  I'm running a production Tester high volume using the CRIO in a car factory, and my application uses the analytical engine.  I fell right on s analysis vi engine in the measures of e/s palette that allows you to target a CRIO and alter the scan engine.  Although very convenient, it seems that it is a very dangerous thing to leave unprotected or some kind of user access rights.

  Can password - protect the scan engine settings changes to avoid this kind of change?  Locking of the CRIO accomplishes this?

  Thank you

  Rob

  Hi Rob,

  I found a better way to protect the cRIO. In your project, right-click on your controller for cRIO, and go to properties. In the properties on the left side menu, you will see a list of Catergories. If you click on the user access, you can allow and deny access to certain IP addresses. Now, only the IP addresses in the list of the grant will be able to connect to the cRIO (and if you can not connect, you can not deploy any code). I tried this and I accidentally the cRIO locked out. If you never lock yourself out, you need to modify the nor - rt.ini, located on the RT controller. Because you can change the access to this file as well, you want to password protect the Max cRIO thus so that this file cannot be changed.

  Thank you

• mode scan interface - 805 error

  Hello

  I am a beginner system Compact RIO. The on I have a few questions scan mode interface.

  The only plug-in hardware is

  The cRIO-9012 controller and chassis integrated cRIO-9101

  a map AI 9205

  a card DIO 9401

  I would like to use the scan interface mode to understand the functioning of the cards, the in FPGA interface mode, it takes time for the compilation.

  The chassis does not support the interface mode scan, so I set up 2 cards variables individually using the I/O. Then I create the VI United Nations simply to read the voltage level of the card HAVE. I get an error - 805: source of synchronization, synchronize with the scan engine.

  I also checked in MAX, scan of OR soft the engine is installed.

  Could someone tell me this problem?

  Thanks in advance.

  Lily

  
  

• Scan engine mode on RT does not not with EtherCAT NI 9144 chassis

  Hello

  I have problem with communication of the cRIO-9074 RT with NO 9144 via EtherCAT.
  I add the expansion with a NI 9203 module chassis to my system running on the cRIO-9074.
  I use it in engine scan mode. My PC application communicates with RT by network data stream. When I run only asks to RT, the RT is the reading of variables EtherCAT I/O chassis with no problems, but when I run the PC host application, RT probably go into configuration mode and interrupts communication with chassis EtherCAT - I can see that the LAN LED on expansion chassis stops flashing. "" Then, with still running application I click in the LabVIEW Project Explorer, the item target and select utilities ' Mode Scan Engine "pass back"Switch to active"Configuration, then it starts to communicate. I tried to do the same thing programmatically work with the Scan Engine VI Mode Set but it doesn´t so Runt-time it does not work as well.

  The behavior described above happened when I added the chassis extension in the project and only the module place entries in this chassis are affected, the rest modules 8 places directly in the cRIO-9074 work withou any problem.

  System:

  Professional Win7
  LabVIEW 2013 SP1
  OR-Industrial Communications for EtherCAT 2.7
  OR CompactRIO 13.1

  Hello

  problem solved. The reason was function RT Set Date and TIme.vi what casues on NOR-9144 error and blocked EtherCAT communication. I found that this function is no longer supported in LabVIEW. After the removal of this feature of application of RT, everything works fine.

  BR, Jan

• Scan engine OR does not work

  Hello, I'm trying to deploy a program on the a compactRIO real-time controller. I decided to use the scan mode for now. However, when I try to start my VI I get the following error:

  One or more items in this deployment that the NI Scan Engine and the corresponding I/O driver (s) must be installed.  Go to MAX to install.

  If you continue to experience this conflict, see the topic "Deploying and running screw on year RT target" in LabVIEW help for more information on the deployment target conflict resolution.

  I time LabVIEW Real-time on my machine so I don't know what is the reason for this and I can't find it under MAX where to install the scan engine (again, I guess that it is already installed).

  I'm using LabVIEW 8.6.1 and the modules I use on my cRIO-9073 are 9477 module and the module AI 9205. Any help would be appreciated.

  Hi Pawel,

  You must install the NI-RIO driver on you cRIO (but first on your PC). After that, go to the MAX and select your cRIO. There is a point of software. Click on it and install the driver on your cRIO OR Rio. The latest version is 3.1.1.

  You will find here.

  Mike

• Hardware scanning Y700 14ISK error

  I currently have the 700-14isk yoga lenovo model. I recently ran the ha / rdware scan from the software lenovo. Everything was fine except it has failed when it came to the test Intel HD 520 graphics card mathmatical operations. Is it because I have decreed NVIDIA gpu (940 m)?

  Result code: WVC007002-UL7VPG

  Note from the admin; system added to the object type

  See https://support.lenovo.com/us/en/solutions/ht105222

  The error is a false alarm.

• OR Scan Engine is available by myRIO or sbRIO?

  I see information on NI Scan Engine for cRIO.  That exist for myRIO or sbRIO?  I can't find this setting when I do a new project.  It is a potential project.

  Help August 2015: https://zone.ni.com/reference/en-XX/help/373197G-01/target6devicehelp/supported_hardware_rt/

• Link to the variable of the scan engine

  I have the attached labview, the settings on a variable diagram and shared block.  In my project I have a cRio who is using the analytical engine and signals some time RTD.  in my computer, I have a shared variable that I have an alias to the scan on the cRio engine variable.  I thought that this would then make the variable shared on myComputer would report to the same as the engine to scan on the cRio variable; However, this is not the case.  In the front, you can see I get 0 for the myComputer shared variable while getting the correct value of the variable of cRio scanning engine.

  Binds a variable to a variable of scan engine means that it will keep the same value?  I have to do something more?  I want to do it this way because I have a VI that find all the variables in the file SystemParameter.lvlib and did things with them.

  

  Hey GreenRiver

  If I understand correctly, you bind the network variable to the ProcessInRTD indicator. If you put this code in a while loop with a stop button, what happens? You can have a race condition here, where he reads the network variable and puts this indicator and then reads the temperature of the unit and who refers to the indicator of RTD.

  A suggestion I have is just wire the output of IO functionality in the network within a variable period of time loop. Then, on your host VI, read the network variable.

• Operation not supported. Cannot open a document processed by the engine of JRC in the C++ stack.

  I have visual studio 2010 with Crystal reports extension add on.  Everything works perfectly in development (Win XP Sp3).  When I create my Web site and try to access a report crystal on my web server (Windows 2003 R2 32 bit) I get the following error:

  Unsupported operation. Cannot open a document processed by the engine of JRC in the C++ stack. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.

  Exception details: System.Runtime.InteropServices.COMException: Operation not supported. Cannot open a document processed by the engine of JRC in the C++ stack.

  Source error:

  An unhandled exception is generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception below stack trace.

  Stack trace:

  [COMException (0 x 80041811): no support of operation.] A document processed by the engine of JRC cannot open C++ stack.] CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open (object & DocumentPath, Int32 Options) + 0 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open (object & DocumentPath, Int32 Options) CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened (+ 95 + 270) [CrystalReportsException: load failed report.] CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened () + 333 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID () + 31 CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport (context RequestContext, Boolean bAddToCacheWhenCreated) + CrystalDecisions.Web.CrystalReportSource.get_ReportDocument () + 201 Reports_POD 438. Page_Load (ByVal sender As Object, ByVal e As EventArgs) + 55 System.Web.UI.Control.OnLoad (EventArgs e) + 91 System.Web.UI.Control.LoadRecursive () + 74 System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) + 2207

  I installed CR2008, 2011, etc. nothing works.
  I've looked everywhere for a solution to this error.
  If anyone has a solution please post.  It would be much appreciated!

  Thank you

  WS

  Salvation Will Stoner,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the MSDN Windows Server forum.

  http://social.msdn.Microsoft.com/forums/en/vsreportcontrols/threads