cRIO and 9234 modules do not work or communicate via fpga with accelerometers, fpga, connected to the real-time application is also related to shared variables related to modbus slave

Hello

I have a compact rio, which has a 4 way frame this chassis is the three modules of ni9234, they are related using FPGAs for application in real time, then using shared variables in the low-speed loop associated with a slave modbus to communicate with the domain controllers, the nor 9234 accelerometers linked to them with option ac coupled iepe on c modules , my problem is the real-time application seems to work well even when power loss occurs it restarts without problem and the fpga written hard disk portable bin files very well, but without an accelerometer connected I get readings of low noise as soon as I connect an accelerometer to one of the outputs 10 it just goes to a fixed number (0.03125) as soon as you unplug it again He returned to readout noise, I ran a scan on the modules and get only a spike when I connect or disconnect the accelerometer, I tested voltage at the pins on the module and I get 22 volts CC which makes it more likely that the material is not the problem, but software is perhaps the cause to hang up, I join the project and files for your perusal. I also realized a new project which, in mode directly linked scan has the module entry in the shared variable and the scenerio even once again. Help would be appretiated.

Thank you very much

Jason

Whren using waveform with the 9234 acquisition, we recommend the following FPGA and RT model.

http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209114

It can be extended as a datalogger with:

http://zone.NI.com/DevZone/CDA/EPD/p/ID/6388

or using shared variables combined with the analytical engine

http://zone.NI.com/DevZone/CDA/tut/p/ID/9851

The FPGA in all this, as well as the framework of RT have used successfully by 1000s of users.  I recommend giving these a try.

Tags: NI Software

Similar Questions

  • My modules do not work all of a sudden with firefox 43.0.1

    This morning, they worked; This afternoon they do not. the error message indicates that they can be verified. should each module be developed by its owner? What a mess! I use windows 7 and firefox 43.0.1.

    Firefox now automatically disabled addons unsigned for the safety of the user.

    Please visit these sections of Mozilla for more information on addons unsigned and how allowed them:

    Warning: The steps above may present a security risk. Please use with caution and at your own risk.

    Please consider notifying the proponent of the addon on the issue, so that they can get their addon signed as soon as possible.

  • As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    This may be caused by the Tab Mix Plus extension

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    You can try to install the latest Dev version of Tab Mix more if you use this extension.

    See the sticky on the forum of Tab Mix Plus:

  • Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

    Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

    Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. It might help others who have the same problem.

    Thank you.

  • All my modules do not work! Help, please!

    Today I turned on my computer and after FireFox starts, I realized that all my modules don't work at all! When I tried to check all have been properly installed and implemented market, but anyway, I didn't see their options in the Tools menu or the contextual menu (which appears when you try to save an image, CCI). My main modules (that I use constantly) are DownThemAll, ImageHostGrabber and NetVideoHunter. None works! And when I tried to "restore my last session", he has not worked as well! (It was in FireFox 11). A coupla hours ago I installed the latest version of FireFox 17th, hoping it would help me solve the problem. Nope! There is none! And by the way, now my "Add-ons" page in the Tools menu just does not open! I already scanned my computer for the bugs and viruses (with 2 specified programs) and found nothing! So I just the hell can understand what the problem is and where it could come from! Help, please! I don't want to install GoogleChrome or any other browsers and wasting my time to import links, fix bugs and various modules, etc.!
    I just need to my FireFox good old (now the most recent, in fact) works correctly and that's it!
    I thank you very much in advance!

    Thank you to everyone! But I found a solution easier - I saved just my FireFox to the base and then added settings on all necessary extensions. Everything works fine now! In any case, I understand your willingness to help: it's really comforting to feel that I'm not the only one!

  • The top of page 1 1/4 inch has no answer whin you click on it. As in this page, sign in or register and other app does not work. in English

    The top of page 1 1/4 inch has no response when you click it. As in this page, sign in or register and other app does not work. in English

    This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

    Hello

    I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

    After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

    It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

    I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

    Can someone help me so that the 3G module working in return?

    Of many tanks and best regards

    Hello

    Have you checked the settings in the BIOS?
    To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

    To access the BIOS press ESC and F1
    Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

    Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
    This is the driver for the 3G module.

  • FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

    modules common to xp... not on this model...

    added value for xp... not on this model...

    FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

    C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

    The Toshiba REAL will raise your hand... Please?

    you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

    I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

    but no one knows where the FN drivers (no pun intended...)!

    None of the drivers Vista FN will get them to work with XP

    XP drivers for other models will not be installed on this model

    It comes from * ed

    1200 for a machine that cannot dim the lcd...!

    It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

    If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

    I will also publish on 4shared.com in a massive zip...

    Ok

    Send me a fix...!

    (too late for a refund...!)

    TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

    If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

    Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
    Maybe you'll find people with the same opinion.

    > 1200 for a machine that cannot dim the lcd...!
    I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?

  • Toshiba common modules does not work properly

    Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.

    Anyone know what this means?
    I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
    Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.

    I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
    Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.

    Please let us know if everything works well again.

  • ICloud and Outlook 2010 does not work

    My contacts and calendar icloud do not work in Outlook 2010.  I've done all the troubleshooting applies recommended - still no dice.

    When I click the calendar or contacts, I get an error message that says: "cannot open all the files.  The information store could not be opened.  I've updated the IoS last night on my phone and Tablet - and it works always this morning at my office on Outlook 2010.

    It happened all of a sudden, and it's after a windows update 2 days ago.  I turned on so anti-virus program.

    He is puzzled, and I think it's related to updates.  I was hoping that the update IOs last night could solve the problem.

    This - see How to fix "Information Store could not be opened" on Outlook, Windows 10 & iCloud.»»

  • Just updated to IOS 10 and replace text does not work

    Just updated to IOS 10 and replace text does not work.  For example typing in omg should show oh my God. Has anyone else got this?

    I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?

  • I can't log in to my account to Mozilla, and Password Reset does not work.

    I have an account to create themes and Mozilla Add-ons, but now it seems inactive,
    and password reset does not work. Here is one of my themes:
    https://addons.Mozilla.org/en-us/Firefox/addon/Fox-December/
    my email: [email protected]

    Support for the site Add - ons are here:
    https://discourse.Mozilla-community.org/c/Add-ons

  • My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

    My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

    Right-click on the header at the top of the list of messages and select from the list of options.

  • The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

    The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

    Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

  • The plus sign next to my tab stopped working: when I click on it nothing happens. I tried uninstalling and reinstalling and it still does not work.

    The sign + to add a new tab has suddenly stopped to work earlier. I tried uninstalling and reinstalling and it still does not work. What can happen and how to fix it?

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

Maybe you are looking for