cRIO and synchronization with PC with 1588 on Ethernet card

Similar Questions

• Loading Deskeop Palm on PC running Vista and synchronization with m130.

  No device

  I tried to install Palm Desktop 4.1.4 and 6.2 on my laptop under VISTA without success.  I can't open Destop or sync with my handheld M-130.  I installed palmhotsyncsetup.com Desktop 6.2 both Pimlico.  The Office seems to load OK but it will not synchronize with the m-130, nor it will open.  When I try to open the Palm Desktop on my laptop I get an error: module not found note pad.exe.

  Any idea.

  Tried to reinstall worm 4.1.4 as you suggested and using the procedure you referenced and found a tip for clk rt the PD icon during startup and select "Open as Administrator" and who did the trick.   PD is in place, running and sync with the m-130.  Thank you very much.

• Work on 2 computers and synchronization with the mobile WARNING LR

  Hello

  I keep a copy of LR on a laptop and desktop, I keep my LR catalog and the library on an external drive. I also synchronize with LR Mobile. When I get out of my office, I get a message saying that x number of photos are always sync. I do not get this message on my laptop. Synchronization on my desktop does not start unless that delete all my data synchronization. It will be just me to get the same message on my laptop. So, I know why this is happening but I do not know how to solve. I would like to continue the synchronization via my laptop. Is there a way to tell LR on my desktop to ignore the mobile synchronization.

  If the solution is to load LR from my external hard drive, which causes a problem with creative cloud and update software? I also have Photoshop on both computers.

  Thank you.

  Try hovering over the plate on the desktop and click the menu drop down. In Control Panel, you can pause sync from your desktop.

• Virtual copies are not synchronized in a second Lightroom Catalog even if the metadata are written in XMP and synchronization with the metadata has been selected

  Dear community,

  I use a Mac with 5.7 of Lightroom which is configured to store all the metadata in the xmp files. The Lightroom Catalog is stored locally on the Mac and contains only references to images and their xmp files that are stored on a network device. There is another Mac with the same setup with a local separate Lightroom Catalog and access to the same images on the network device.

  At a starting point, the two Lightroom catalogs are identical - they refer to the same images on the network device and contain the same metadata.

  When I update the properties of the image on the first Mac, these changes are reflected in the xmp file. After using the option 'synchronize' with activated "metadata synchronization" on the second Mac, the modified image properties are visible on the second Mac. It is very good.

  However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated. However, even after the synchronization, the virtual copy is not visible on the second Mac. I can change the properties of the image of the original image and get these changes replicated to the second Mac, but the virtual copies remain the first Mac.

  What should I do also virtual copies get synchronized?

  Thank you very mich for your support.

  Best regards

  Peter

  However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated.

  As far as I know, xmp does not contain information about the virtual copies. If this method to attempt to synchronize two catalogs will not work.

  Better you should use the file-> Export catalog on a single computer and then file-> import from another catalog on another computer.

• DM 4.0.0.833 and synchronization with the data-> TABLES DROP dictionary

  Hello

  I have a DataModeler physics implemented in Oracle database, I drop a table of data in DM maker 4.0.0.833.

  The database with the data dictionary synchronization and does not detect that you have deleted a table.

  
  Is this a bug? Or am I something wrong?

  
  

  Thank you
  

  Please mark the thread as answered if answer has helped you to solve the problem.

  Thank you

• Work with the timeline and synchronization with the music

  Greetings!

  I'm trying to synchronize the animation with a piece of music and I'm running into difficulty working with the scene.

  I can create a layer, import a song file, it appears as a wave sound and even shows where the music ends. My problem is that when I use the key entry to play the animation, when I try to stop the animation timeline stops, but the music stops of will and I either have to wait for it to terminate or change the synchronization setting stops, which removes the Visual sound wave.

  I'm used to working in Final Cut, where I can stop and start several times - is there a way to do this in Flash?

  Flash CS5 (11.0.2.489), 21.5 iMac, 3.2 GHz, 8 GB RAM 10.6.6

  Thanks for your time!

  assign property sync of its flow.

• Delete and synchronize with the new iTunes library

  I recently got a new MacBook Pro and put in place a new iTunes account using my apple ID. I was previously using a PC computer and buys a different apple for iTunes id. My phone is synchronized with the computer and transferred all my purchases to my computer, but not my apps. But now it is said to bring anything to my new iTunes, I need to erase and sync, then I can put on the new iTunes things. It is said that it can only be synchronized an iTunes at the same time, but what is it clear? If she will take just the back upward, that's fine. I'm just confused about what is clear and what will happen if I clear its contents. Any help is appreciated.

  sbe1998 wrote:

  I recently got a new MacBook Pro and set up a new iTunes account using my apple ID. I was previously using a PC and buy a different apple ID for iTunes.

  Why did you create a new AppleID?

  You can't transfer purchases to the new AppleID.

  You can update old AppleID if you have the new email address.

  Just copy the entire folder/iTunes / / Music from PC to Veronica on your Mac.
  That's all you need to do.

• The volume on my MP3 player is too low after extraction and synchronization with windows media player. What can I do?

  I intend to play my MP3 in my car, but the volume is too low. I tried to adjust the volume on the car radio and the MP3 player, but the volume is still too low. I tore and synchronized through windows media player with MP3 and the speed of transmission of high-quality files. Also I tried to drag and drop in windows Explorer, but once again the volume is still too low.

  I tried also exactly the same with an IPOD shuffle, but again, the volume is too low.

  Try the steps in the article provided

  http://www.ehow.com/how_7464813_increase-DVD-rip-volume.html

• Question "BOLD" of blackBerry Smartphones and synchronization with the new Media Sync for Mac

  Someone at - he had problems with the new media manager not achievements the media in the "BOLD" card, it worked for my curve but not the "BOLD" it says for me to insert the press card. I tried formatting, but still used hired there is one in there to transfer my iTunes. Any suggestions?

  I just tried sync'ing a playlist from iTunes to my "BOLD" w / Media Sync and it worked fine. I don't have a memory card either. It took two trials - the first doesn't seem to work, but the second went without a hitch. You have your "BOLD" value will automatically switch on the mass storage device when connected to your Mac - I do not know if it would make a difference.

• Multiple Blackberry blackBerry Smartphones and synchronization with Outlook calendars

  Hello world

  I have 3 different calendars on my "BOLD", but when I sync with Outlook, it syncs only one of these calendars. Is anyway to combine all 3 caldenars to one on the Blackberry, so all appointments will be synchronized with Outlook? I have 3 calendars in error, not by design.

  Thank you

  Darrell

  Take a look at this article

  http://www.BlackBerry.com/BTSC/KB19240

• Export and synchronization with the AF sound

  Hello, program is really interesting, and I see big potential, but maybe not for my, I don't understand it begins

  I want to ask you, what I am doing wrong.

  My film animation for export and import as a wermutstrop to the FA. Animation is long 735 dng, but the sound is longer then wermutstrop dng. How can I import in the AF and sound video at the end of synchronization. I can see in Ch, the animation is just 12 fps. What I am doing wrong in AF.

  Thank you

  Hi Jan... Either use the dialog box interpret the consistent at the same rate (12 fps) film about the PNG any of the sequences, or even easier is to use the import script (file > Scripts > new host character model Recording.jsx) which makes the import and in line for you.

• Synchronization with computer without SIM card blackBerry Smartphones

  I still have my BB BOLD ubt waiting for provider myservice provide SIM card (it takes 3 weeks).

  While I'm waiting, it is possible to synchronize my phone with my office in order to import contacts, etc., without the SIM card inside? If I do this, when I put the sim card, mydata will remain in the phone?

  Thank you!

  All contacts and data synchronize you with the BlackBerry device is stored in the device memory or the memory card, no Sim Card, go ahead.

• BlackBerry smartphone synchronization with Outlook calendar and remember more than 200...

  Since obtaining my Curve 8310 and synchronization with outlook calendar, whenever I re - synchronize my handheld device remembered only about 200 of my events 1000 + and offers to remove 800 + events to my outlook on the pc.

  I don't want to lose these data to both portable and pc. So I always click on the option "re-sync" so that I have (re) - effectively transfer the info from my pc to the handheld every time, so don't not the deletion of valuable data from my pc.

  It seems a bit ineffective design and more unlike blackberry. That's why I missed something somewhere, I'm sure...

  Can someone tell me where I'm likely to go wrong? I would be very grateful...

  PS. I recently upgraded to version 4.5 OS and synchronized with enthusiasm to see if it was a question... He seemed to remember data for day 1. But now I have to synchronize again today. Back to his old "do you want to remove any tips?'..."

  Hi and welcome to the forums,

  You have your configuration only transfer again?

  Located in taper to transfer the date range, I usually put 365 on both sides

  before that date and after this date.

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• The HP ENVY h8-1500z with a new video card upgrade

  Hello

  My current video card is a 1 GB of Nvidia that came with the installer and requires more power.  I want to upgrade the video card for this (http://www.newegg.com/Product/Product.aspx?Item=N82E16814131562) this map requires power and this kind of care.

  

  I opened my PC and it looks like the current power is 300W, but I do not see a card for a video about this card. My question is: Y at - it sort of an adapter I can use with existing PS? If I need to exchange the PS, can I use any power supply in this PC? It will be (http://www.newegg.com/Product/Product.aspx?Item=N82E16817139050) to adapt and work? If not, what suggestions do you have?

  Thanks for the help.

  Wanted to add that I am running:

  6-core AMD FX 6120 to 3.50 Ghz

  14 GB of RAM

  64-bit OS Win Pro 8.1

  NVidia GeForce GT 620

  The graphics card, you want to install on your computer requires a minimum of 500 watts power. The Corsair CX500M that you access will work for your computer and work with your desired graphics card.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Synchronization of e-mail and contacts with icloud

  I have an iphoneSE c. 9.3 (last updated) and win 10 computers.  I want to synchronize my computer messaging and contacts with my phone.  I need to create an e-mail for this icloud account?  Also, I'm confused by what I should turn on or off in the settings.

  Just set up the e-mail account with the same information on your computer to your phone:

  Set up an e-mail account on your iPhone, iPad or iPod touch - Apple...

  This discussion might help the synchronization of contacts:

  How can I sync my Iphone contacts with laptop running Windows 7