CRIO of deployment plug-in missing 9082 and NI 9514
Hi all
I am trying to use deploy a 9514 C module that is installed in a cRIO 9082.
I would like to get access to the interactive test Panel, but every time I try to do it won't let me not deploy the unit.
I get an error as follows: "LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item.» Make sure that the appropriate software is installed. Deployment is completed with errors", that leaves me unable to access the test Panel.
I have 2012 LabView and NI RIO 3.3.0 installed. Also, I tried to update the firmware on the 9514 itself using LV without modification.
To see the software installed on the cRIO, see the image as an attachment.
No idea what I'm doing wrong?
Best regards
JZaulich
Hi Jakob.
Thank you for this test. Versions of the software now matches our documentation. I looked in the documentation, and that should be all you need. Unfortunately, that didn't solve the problem.
However, I found an old service request about a similar problem, where the solution was to install the driver OR Motion. According to all the literature I found, it shouldn't be necessary, but I can try you?
http://www.NI.com/download/NI-motion-8.5.1/4355/en/
After installation, you must also install the driver on the RIO using MAX.
Tags: NI Software
Similar Questions
-
I tried Windows 10 and after 10 days of hell, I asked them to uninstall. But went with is my old Acrobat Reader. I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too. A friend told me that I have to uninstall and then re-install again. I am a 71 years who does not know what to do. Help
Hi jimm13886845,
Of course I'll help you get this problem is resolved.
Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.
Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.
Let me know if you encounter a problem, we will be happy to help you.
Kind regards
Nicos
-
CS6 missing tools and convert the RAW files from my Canon D 760
I have Creative Suite Premium edition in 2012. There seems to be missing tools and I can't convert my RAW files from my Canon D 760. Can anyone help?
There seems to be missing tools
Those who precisely?
Also, I can't convert my RAW files from my Canon D 760. Can anyone help?
Devices supported by Camera Raw
The 760D has been first of all fully supported in Camera Raw 9.0.
Download and install Camera Raw 9.1.1 which is the latest version of Camera Raw, which is compatible with the CS6.
In Photoshop, click Help > updates.
Check if the correct version is installed in Photoshop by
Mac: Photoshop > about Plug-Ins > Camera Raw
Win: Help > about Plug-Ins > Camera Raw
If this update mechanism is not working, try to manually install Camera Raw 9.1.1
Camera Raw installation of Adobe Photoshop CC and CS6 program
-
How to remove missing references and audio files or instruments that popup at launch I need is no longer?
For audfio missing files: go to the Project Audio Bin, mouse control select unused , and then press DELETE. And then click Save.
Missing instruments or plugins, go to your mixer and remove/Exchange any plugins that have a '!"in all of their slot. And then click Save.
-
Missing episode and title of the Podcast
I produced a podcast for a few months and everything went great. But now one of the episodes (ep #15) is missing from the iTunes store and my title changed to "No Title". Do not know why.
Pet food; http://www.underthecrossbones.com/feed/podcast/
iTunes Store: https://itunes.apple.com/us/podcast/no-title/id1039621331?mt=2
I checked my stream and the missing episode and the title are here. I also watched the show in a different podcast player and everything is there. I use Blubrry power press to manage the episodes on my Wordpress site and I double checked all the settings there.
Ideas?
I can't check in Windows, but in iTunes on a Mac store, there is no missing titles. However Episode 15 is missing, even if it displays when you subscribe and seems to be OK in animal feed. Sometimes, the store does this kind of strange thing: it will probably itself sort out the next time the Bank verifies the power, I hope in the next few days.
-
My battery is empty and does not load. I plug in the power cord to opperate the computer but the battery won't charge. Icon is reading "plugged in, not charging" and battery LED light on the side of the computer is flashing white, even if the laptop is turned off.
I checked the adapter cord and battery test that came back "ok".
Is it my laptop stop working once I have run out of battery even with the adapter cord? How can I fix the battery?
Thank you
Annie.
Your battery part number is 761230-005.
REO
-
Get error message iTunes had some missing files and must be reinstalled after Windows updates
Original title: Windows Update 10/02/11; iPhone 4; iTunes no longer works
I have connected my iPhone 4 on the USB port, it synced and then left the phone connected and current run iTunes when I went to bed. When I woke up, the Welcome screen was carried out and, after login, I got the message that Windows updater had made some updates. When I clicked on iTunes, I got an error message that iTunes had some missing files and must be reinstalled. I tried to do a system restore to recover my iTunes library before the update. System restore would not have worked either.
Hi SethAaaron,
It seems that the reboot might have corrupted the itunes.
You can try to uninstall itunes completely and reinstall and check:
Check out the link:
You can view the following link to uninstall a program:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Also check out the link:
No content appears in iTunes after to
http://support.Apple.com/kb/TS1967
"Some required files are missing" error when opening iTunes 7.5 or error-2093 when you open QuickTime Player 7.3
http://support.Apple.com/kb/TA25074?viewlocale=en_US
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think, if this post can help solve your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Photosmart 6520: Miss username and password to access Photosmart 6520
Miss username and password to change security etc. by web app to the printer
I understand now. You are in the built-in Web server and can't access the Admin settings. In order to reset the password to the parameters, we need restore default settings of network on the printer, and then reconfigure the printer to your wireless network again. You can use the following steps to restore the default settings of network on the printer;
- Tap the icon of the small key (settings) you see in the upper right of the touch screen of the printer.
- Press the wireless Menu.
- Navigate to restore the default settings of the network.
Once restored, go to the Wireless Setup Wizard in the Wireless Menu and reconfigure the settings.
-
Recently, MS windos XP sp3 fails to recognize the common plug & play devices. Says error message "software not signed" then demand load anyway?... I say yes, but the charger just an infinite loop, preventing the drivers to load.
MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = unsigned. Was the load ok previously.
This is how I have to upgrade? I have five computers and two are 98 and 95 for some software. That line. TonyR
The signed data are perhaps crushed or damaged on the HARD drive.
Hello
See this Microsoft KB article and check if that helps.
How to troubleshoot unknown devices listed in Device Manager in Windows XP
http://support.Microsoft.com/kb/314464
When you install a device driver and Windows detects that it is not digitally signed, you receive a warning message and the option to cancel or continue the installation this message only appears if your computer is configured to display a warning message whenever an installation program attempts to install a device without a digital signature driver.
Note A device driver is signed digitally can still be listed as an unknown device in Device Manager.
For more information about driver signing for Windows, see the Microsoft Web site at the following address:
-
Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens.
Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens. How to solve this problem?
try to reinstall the Intel chipset drivers:
http://us.Acer.com/AC/en/us/content/drivers/4531;-; Aspire 20ZS600%
Select your operating system and download the drivers from the Intel Chipset, and install it, restart, and try again.
or
Press the logo windows + x
Choose Device Manager
Click controller series universal
Right-click on the Intel USB controller, and then choose uninstall
Once done, reboot and wait windows re - install the drivers
-
Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.
Hello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads -
Windows Vista 32 bit OS. Corrupt or missing files and error msg "invalid parameter."
Windows Vista 32 bit OS. Corrupt or missing files and error msg "invalid parameter."
Original title
I don't understand what you mean by "title". You want a test?
Hello cock.
Please see the TechNet wire which may be related to your current number: -
Recently, I had a problem in that, plugged in my camera and also my phone options auto run does not come up as they used to do.
The cameras appear under my computer and in Device Manager but not under "Devices that you connect to your computer will be listed here" appear in the automatic game options and this area is totally blank.
I also checked the box "Use AutoPlay for all media and devices to" check in the auto play options. CD and USB sticks work very well.
I have Windows Vista. I read that Microsoft has sent a security update patch to stop the AutoRun works on Windows Vista. I tried to turn it around by using their dose, but it doesn't seem to help.
Any ideas anyone?
Hi - my problem is now solved.
Not long after reading the post above the laptop crashed and had to have a replacement hard drive.
I just got the laptop PC repair workshop, and although there are still a lot of updates to download, I plugged the camera the hurrah the AutoPlay menu appeared.
Obviously there is something fundamentally wrong with the laptop, but it will be interesting to see if AjutoPlay still works when all the Microsoft updates have been resettled.
Thanks a lot for your help.
-
Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.
As you have a laptop, better make this laptop in the computer Forum post here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Tip: when you post a message, preferable to always include the computer model.
Bev.
-
Help ID this product that plugs into the back and in the wireless card I believe.
No technical support can tell me what it is and can't find it online so I hope that someone here a tell me. My PC is a Studio XPS 435MT running vista sp2. The thing plugs on the back and it looks like the wireless card. Any help would be thank you very much.
The reference is WX482. It's a wireless antenna.
http://www.eBay.co.UK/ITM/Dell-Wireless-antenna-1-5-M-cable-RU297-WX492-brand-new-/290640031415
http://www.Amazon.com/Dell-Ru297-wireless-network-antenna/DP/B008GHIB8W
The installation DVD contains only the OS and all the native drivers for Windows (included by Microsoft). All drivers that are not included by Microsoft with the Windows operating system must be installed. Looking at your 435, if you install Windows 7, you should not need to install the system software (software Dell which can change the functionality or the identification of some of the equipment) or the chipset (not listed). You must then video and, eventually, audio drivers or modem. If the installation of Vista, you won't need the system software (none is listed for this system), but you must start with the chipset drivers.
Maybe you are looking for
-
name of the variable to variable
Hello to all (especially @Niel & @Stivejobstan123 & @Camelot) next beginner question: can I ask (and, in fact, create) a variable by its name in this way: Repeat 3 times I put 1 I value a (i) * 6 Set i to i + 1 end repeat back to (2) return etc. PS I
-
I had this problem with Firefox 4.x - and I just upgraded to FF5, but the problem persists. What happens is, when I surfed on more than one page (or site) on a tab, then want to go back, I find that my back button history has often several versions o
-
Top of the page next to the image/photo is the Statue - Online etc. Below which the LOCATION with a flag I want to talk to someone at the monent that says to call from China, but the location shows as Sydney Australia So... Location of the is a secur
-
Download Windows XP Professional SP3 update installers?
I have an old computer running Windows XP Professional SP, and he needs an Ethernet card. Unfortunately, I don't have enough money to buy one for her. Is it possible that I can download all the updates that are released for it and put them on a drive
-
HP Mini 110: the password test failed CNU9256w50 fatal system error
I tried to turn it on after a few months of use do not, and this password thing came, but I have no idea what is the password. Please help me password check failed CNU9256w50 fatal system error