Critical Airport network functionality can be enabled to provide access to printers, Apple TV, music player?

Similar Questions

• How can I get the albums without support of Apple's music?

  Can how I buy music without support of Apple's music?

  You can use the iTunes on your iOS device App Store to purchase music and download songs. It is a separate application, then the application of music but once you make a purchase and download songs will be playable in the music app.

• My Airport Time Capsule can act as a WIRELESS access point

  Hello.

  I brought a Time Capsule with my Mac Pro. It worked well since yesterday.

  I have set up the time Capsule as a WIFI, bypass at my local network access point. There is a router (cable) works at home.

  It's my Mac Pro AirPort Utility and my iPhone, my Time Capsule is displayed with an exclamation point saying "device not found". I can't connect to the disk on this subject by afp share, or smb. Time Machine function is gone too. He failed trying to connect to the share drive from another computer connected to the time Capsule by cable network.

  But at the same time, WiFi works well.

  I tried to recycle energy. Sharing disk will be available. But if I start the Time Machine backup, it will not be a few seconds.

  Any idea?

  Thank you.

  There are several posts here related the issue.

  Luckily, you have set up your new Time Capsule for Back to My Mac (BTMM)?

  If so, the 'temporary' solution is to delete/disable the option of the CCMM, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

  If you have not enabled CCMM, we have other options for you to try.

• I have some old CD of music on them. How can I add them to my collection of Apple's music on iTunes?

  Hello world. I spent my garage and I found some very old classical music on the CD. I have a subscription to Apple's music and I want to be able to play this music on my computer/iPhone. How do I rip the CD therefore music appears in my music library in iTunes? Thank you for your help. (Importing and burning in iTunes)

  Open iTunes, insert the cd, click on import

• Invited with 2 airports network expansion

  I have a Time Capsule 802.11ac (used a router with DHCP and NAT) and an extreme recently added as an extension of the network.

  I configured the extreme through the Airport utility to expand the networks via a connection time Capsule wireless net of ether. I have configured the router out of the box with the utility Airport a few weeks ago and everything seemed ok. When the update to Airport utility and Firmware was released this week I updated the two airports (now at 7.7.7) and Airport utility.

  Who broke the network extended comments. In my opinion, he was working before the update, but it was not much used. After the update, the primary network of comments Time Capsule airport operating normally as before. But when it connects to the network invited by the extreme mode bridge, my devices that all get a self assigned IP. Apparently, broken updates bypass DHCP.

  I have reset the extreme at the defaults and it reconfigured several times with Airport utility, but it still does not work.

  To summarize the network is Time Capsule (DHCP and NAT) with the network comments-> Extreme (bridge with network feedback mode) connected by ethernet. The main wireless network works on the two airports. The distance between the Airpotrts is 3 floors and about 60 feet, so that they do not interfere with each other and the networks may be extended wireless only via ethernet.

  Has anyone another considering also occur after the recent updates? Before?

  I contacted Apple support, and so far, they are puzzled. The technicians were not very familiar with the expansion of network of comments and intensified the issue to engineering. I believe that the recent update may have caused the problem, but not sure.

  I solved this problem. When you use Ethernet, you must have a direct Ethernet connection between airport expansion and airport router (no switch between the two). Now comments from both airports network functions.

• Can I use a gift card to iTunes to charge my subscription of Apple's music?

  about to buy an iTunes gift card and I wanted to know if I can use it to charge my subscription of Apple's music. Thank you

  Hello

  I think you can...

  Check out this discussion > you can pay the new composition of music from Apple with an iTunes card?

• Can I transfer my subscription to Apple's music

  The woman has children attached to its AppleID for family sharing.  I have the Apple music account and children would like to support my subscription of Apple's music.  But, since they have already joined in the account of the wife through sharing of the family, they can not also be attached my subscription of Apple's music.  Can I transfer the composition of Apple's music to the wife, or cancel my subscription to Apple's music and start again on the side of wifes?

  Hi E.F.Hutton,

  Thank you for your participation in the communities of Support from Apple.

  Because your wife is your group sharing of the family Organizer, she subscribe to Apple music and choose the members of the family. Then you can put an end to your individual subscription to Apple's music and (after its expiry date) join the family group shares to take advantage of the members of the family, too.

  For these steps, see manage your membership Apple music on your iPhone, iPad, iPod touch, Mac, or PC and set up the family sharing.

  Best regards.

• You can disable network functionality

  It can move, but I didn't know where he was going.

  I have a Tungsten E2.  I have a ball of baseball scoring software package that I use in this topic.  Whenever I get back something, the Palm is looking for a network service.  Is there a way to disable network functionality?  I looked through the manual and saw nothing.

  Thanks for any help.

  The only characteristic of 'network' has the E2 is Bluetooth.  But it seems that the software itself is trying to establish a connection, as if she's trying to connect with a place to download data... has it always done this?  Perhaps there's an option or preference in the software that turns off this feature?

  Oh Yes... I moved this to the Commission of software.

  Message edited by smkranz on 06/25/2009 15:43

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.

• My 6to4 network card can not start code 10. How can I fix it? I think he asks me not to connect to the internet

  My computer is an inspiron 1525 Vista Home Basic

  Hello

  The basics of the Internet runs on IPv4.

  03:54 is not necessary unless you click on and link that is configured as IPv6, where the name 03:54 (chahge IPv6 to work on IPv4).

  To turn on/off and set the IPv6 components - http://support.microsoft.com/kb/929852
  -------------
  Generally to evaluate wireless.

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

• Can my older extreme join network of my new extreme and provide printing as an Express services?

  Hello to you all, kind-Apple-help-people...

  So, I just got a refurbed Time Capsule/Extreme to replace my old, short ' squat extreme n.  I have the new network that all together up and happy, no worries.

  Back in the day, I used to have a fleet of 1 St gen expresses established providing the air in different rooms and connected to the printer in the office. They disappeared for a long time now, but it occurred to me that it would be nice if I could put my older extreme, now retired, to such use.  I want to put in the office and my printer on the USB port.  I really didn't need to "extend" the network or anything fancy.  With my old man expresses, I just put them up to 'join' the existing network.  This "join an existing network" doesn't seem to be an option available when I run today Airport utility.  Can I do this?

  Sorry, but no. You can't have an AirPort Extreme 'join a wireless network' for the purposes of sharing printers or hard disks. At best, you could connect by Ethernet to your Time Capsule to this effect.

• How can I make it work with just an Apple TV, AirPort Express and iPod/iPad/iPhone?

  Hello people of Apple, I have some questions about a new "setup" of Apple products that I hope I can get to work between them. In other words, I need to know if what I am wanting to do in fact is possible with this new configuration.

  Current set up:

  • mini iMac (a former member of 2010, but fully updated for OSX El Capitan)
  • drive external HARD as the Time Capsule disk and with tons of music not purchased through the iTunes store (from my CD collection)
  • Old Airport Express connected to the modem (which received the fiber of my ISP)
  • 3rd Gen iPad
  • iPhone 6 more (work phone)
  • iPod Classic 5th Gen with close to 30 GB of my library and plugged on my car stereo to
  • iPod Shuffle 4th Gen for gym

  I want my setup to be:

  • Apple TV
  • Airport Extreme with external HARD disk * even from above * (my library backup iTunes music around, videos and photos) connected via USB
  • iPad Pro
  • iPhone 6 Plus
  • iPod Classic 5th Gen that I want to stay plugged into my car stereo to
  • iPod Shuffle 4th Gen for gym

  So my questions are: can I continue to sync my iPod Classic and my iPod Shuffle without a computer (I guess maybe not), and if so, HOW? I'll be able to sync the iPad and iPhone via wifi without computer as well? Also, I'll be able to play my library directly from the drive external HARD using the Apple TV?

  I'm guessing / hoping that the new Apple TV from the music/iTunes app and the pictures/iPhoto app, I can connect my iPod to the airport and synchronize them via the app AND connect Apple TV directly on the HARD disk via the airport. And perhaps also to synchronize the iPad and the iPhone on wifi in all Apple TV apps or something or maybe I just need any Uploader in iCloud and will not even need the HARD drive more except as a backup. Help!

  You have need of computer-Mac or PC. You can sync the iPhone/iPad wireless, but only via a computer in iTunes, I'm not sure about the capacity of wifi iPod.  Not to mention the iTunes, the software is required to manage the devices and media.  Important note: you must always back up your purchases - just because you buy a book, movie, TV show, song today does not necessarily mean that the media will be available from Apple servers for eternity.  The Studios retain rights and may, at any time, sign an exclusive agreement with a network, streaming provider etc which would then remove this file to be available on Apple servers.  You must download and save purchases - that would need a computer running iTunes software. You could buy storage for all your media, but then additional personal iCloud yet you would need a computer to manage. In addition, with respect to the Apple TV, you cannot connect all readers.  The USB port is only for the restaurant and full-service.  The Apple TV is a streaming device, but for the local media, he uses homeshare, which requires a computer iTunes rather than be connected directly to a storage device.  Although there are other applications like plex or infusion but they would require a NAS configuration rather than the HARD disk, and you would want / need a computer to manage the NAS server...

  the only thing you want to eliminate is the only thing that is required for all...

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• Airport network - difficulty to its replacement by a component of roaming

  I have a roaming (ethernet) Airport network.

  Cables/modems (UBEE of TW) - Airport Extreme - out ports WAN on Time Capsule and Airport Express (also connected directly to the radio). Configuration, as far as I know, conforms to Wi - Fi base stations: how to install and configure AirPort Express for AirPlay and iTunes - Apple support>

  The Airport express was old and keep people with their streaming music dropped. So I had a new Terminal Airport Express 802.11n.

  I can add it to the network - but as soon as I do, the internet connection goes down. When I remove it, the internet connection is up.

  I can't understand what could be the problem; the old Airport Express does not cause this problem with the internet connection.

  I'm under El Capitan.

  Lisa,

  This type of problem occurs when the Express is first set up to connect to the network using Wireless... .and then the Ethernet connection is applied. In other words, the Express waiting for a wireless connection but it also gets an Ethernet connection... and this creates a massive feedback loop that effectively blocks the network.

  Please, try the following:

  Turn on the Express for a minute or two

  Maintain in the reset on the back of the Express button until you see the yellow light starts to Flash quickly, hold a few seconds when it occurs, and then release the reset button. Give the Express a full minute to restart again.

  Make sure that Ethernet network cable is connected to the "O" on the Express WAN port

  Click the WiFi icon at the top of the screen of the Mac, and then click directly on the AirPort Express Terminal to start the configuration "Wizard". The first screen that appears resembles the illustration below, except that you will see your devices and the network name is displayed.

  

  Type a short and simple name that you want to use for the Express

  Click next

  Now, look at the following screen to confirm that the Express is set up to extend using Ethernet. It is the confirmation that the Express will be configured correctly.

  

  When you see the message Setup is complete, click done.  And you're done.

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.