Critical network adapters disappeared after update

Hi all

I have a HP G60-630US laptop, running Windows 7 64 bit. A few nights ago, Microsoft commissioned a critical update. After that, all of my network cards contained errors, and I had no network connectivity the wireless or wired. Hovering over the network icon says "no connection is available" (wired or wireless).

I tried to do a system restore first, which has no effect. Then, I went to the Device Manager and found errors with the following text:

Atheros WiFi card

Realtek PCIe FE Family Controller

Miniport Wan (IP)

Miniport Wan WAN (IPv6)

Miniport Wan (Network Monitor)

And under the PnP no errors with:

NativeWiFi filter

QoS Packet Scheduler

PAM light filter

I uninstalled and then reinstalled, the WiFi adapter and Realtek adapter (I tried letting Windows find drivers on the HARD drive, tried HP driver downloads and then tried the latest drivers on the manufacturer websites). Then you use devcon, I reinstalled the following adapters:

MS_NdisWanIp

MS_NdisWanBh

MS_NdisWanIpv6

MS_IrdaMiniport

MS_IrModemMiniport

MS_PptpMiniport

MS_PppoeMiniport

MS_L2tpMiniport

MS_agilevpnminiport

This has removed the errors of the network adapter in Device Manager, but I still have errors with no PnP devices. I have no idea how to reinstall them. I show that WLAN is on, but still there is no network connection. I still get the same "No available connection" error, and troubleshooting gives me this error (cable and wireless):

Windows could not automatically bind the Protocol IP on the network card stack.

I tried the following, but having no impact:

netsh int ip reset all

netsh winsock reset catalog

Route f

Route Pei - 4 Add 0.0.0.0 mask 0.0.0.0 192.168.10.1 (192.168.10.1 is the IP address of my router on another computer)

Under Network & Sharing Center, I tried to click on "Change adapter settings", but it gives me just a blank page, without at all adapters.

However, "msinfo32 > summary > components > network > adapter ' shows that the Miniport (SSTP) WAN is here, with the others, but"Card Type"for each of them to say 'not available', and the IP address, IP Subnect, IP gateway by default and DHCP server all say"not available ".

Finally and most importantly, I can ping myself with no packet loss, but nothing else. So I don't think that the NETWORK card is bad; There must be a conflict with this MS update, but I can't find it.

NO indication at all would be greatly appreciated. This notebook belongs to the Office Manager, and I worked on it for 3 days now! She is doing no work, so I am a little, it becomes a problem.

TIA,

Jason

Jack, I think you might have misunderstood me. I apologize.

When I click on "change card"parameter, there are no adapters on the screen. I have the button "Organize" on the top as usual, but the content area of the screen is all white, with nothing to click on.

But I guess we can forget just for now; a system recovery has apparently solved the problem (for now). But just know that something on 14/09/10 updated critical killed a HP G60-630US, so there must be an incompatibility somewhere.

Tags: Windows

Similar Questions

  • Intel Proset wireless network card disappears after update XP Malware critical tool

    Dell Inspiron 1520 Windows XP SP 3

    My Dell suddenly won't connect not the access point / wireless router / ADSL. Another computer in the House connects fine. Computer has been updated automatically by computer Windows is often verified by McAfee, Secunia, System Mechanic, Lavasoft and MalwareBytes. Among the auto updates could be interrupted?

    'Away', says wireless adapter... Does not recognize the WiFi in the area.  Tried to 'fix' adapter, but message says adapter does not exist.

    I used the restoration of the system for 4 days earlier and the laptop connected immediately. I see a new symbol "added locally on Actiontec m1000 network connection in the network connection window and the network wireless connection says that it is connected to the correct network that has worked well for several years.

    I have several updates of Windows for malicious software tool that install immediately if I reboot, but then I can't connect to the network and must use System Restore (which is now lost because it took more space than allowed). So unable to connect on the wireless... I use another computer for this entry. Help, please.

    Thank you for your response. A friend suggested that McAfee Antivirus had caused a similar problem. I disabled McAfee and the Intel Proset adapter reappeared and the internet could be accessed again. I have removed McAfee from my computer and do not use it again. I hope that this simple correction may be useful to other people with similar problems.

    Thank you for your quick response.

    XPUserCO

  • application nike + ipod disappeared after updating to IOS 9

    application nike + ipod disappeared after updating to IOS 9

    Can you help me?

    How to get back to IOS 8.4.1

    Best regards

    DILPRINCIPE

    There is no restore IOS. It seems that Nike was not interested in the old app/device support. There is a Nike + running app that you can get to replace that uses the accelerometer in your device iOS instead of the Nike sensor +.

    TT2

  • Wyse V30LE VNC disappeared after update

    Wyse V30LE VNC disappeared after update

    Is it possible to restore the software TighyVnc on firmware for Wyse V30LE was last updated?

    Hello Rogerio,

    Do you like the answer.

    One of my superiors I shared the add-on remote shadow for CE device yesterday. I downloaded for the link below.

    App.Box.com/.../y1axhtd69hqmzcaygle9crwx8cfkyrf8

    I tried to install on my workstation and VNC has been successfully installed.

    Hope this helps someone to solve the problem of the shadow (VNC) remote on thin client with B674 V6.0.

    Thank you

  • A6000 more Twitter icon disappeared after update of Lollipop

    After updating my phone crashed. He resurrected himself, when I rebooted several times. Now the Twitter icon has disappeared. I can start it by typing Twitter on Google widget, I can also launch it from Google through my Apps. How can I get the icon back? I tried to reinstall mNy times without success. Help, please.

    Note from the admin; type of phone and ROM version added to the object (assuming the others offer the correct information)

    Factory reset solved all the problems.

  • XP computer on network disappeared after update

    After weeks of trying everything on these forums, my new machine windows 7 recognized suddenly on my network, my old XP computer. I could link to a network printer on my XP machine and card my documents from XP and a USB on the XP backup drive.

    I started to do a transfer of files and settings. Then, there was an update of windows. I stopped the transfer (before whatever it was transferred, either - I always decided what to include) and restarted the computer after the update

    Now I can't see the old XP machine in network I can see the drives mapped to my computer, but he lost some actions. I have reset the actions on the XP and that you can now view 7. BUT I still want to access the other stuff on the old machine (for example, the optical drive).

    What is strange, is that I can see the new machine 7 to XP, but can't see XP to 7.

    I spent hours trying to get this to work - now what... any suggestions to get it back (apart from catering to the last restore point when everything worked - because it will still need to update later).

    This seems all very weird and I have no explanation for the phenomena you describe. Here are the options I can see for you, listed in order of preference:
    (a) uninstall all antivirus programs and firewall on the Windows XP computer.
    (b) restore your computer to a restore appropriate point.
    (c) restore an image of your Windows 7 computer.
    (d) charging Windows 7.
    (e) living with the problem.
    (f) let me take a look at your machine by launching TeamViewer (www.teamviewer.com).
    Send a note to pegasusDOTfnlATgmailDOTcom if you want to learn more about the f option).

  • Wireless connection disappeared after update wireless connection device

    Hi, I can't connect to any WiFi recently on my computer laptop so I did a little research on the internet and discovered that keep the device wireless to date is one of the solutions. But after I updated it my laptop have a bigger problem, my wireless connection is totally absent. Until it isn't "manage wireless connections" on the left side of the network and sharing Center , but has now disappeared, my "change adapter setting" to have a WiFi connection , but now also disappear. My laptop is Windows 7 and I have attached a screenshot here for your better understanding. I'm not an expert in computers, so please respond in detail as you can, thank you.

    Thanks PML and GTS-NJ for your good answer. I solved it by downloading the drivers the website of the manufacturer of my laptop's wireless and re - install all drivers wireless.

  • News Apple disappeared after updating IOS 10

    I have the i-phone, 6. I recently updated my phone to IOS 10, and man I can say that I am disappointed. Other than my phone is extremely slow and the code for unlocking my phone doesn't answer do not sometimes, I lost suddenly new Apple. I got it on my phone for up to one day after I installed the update, but now it has completely disappeared.

    I tried solutions:

    Turn off the phone and the

    Looked in app store (not there)

    Solutions of Google (none)

    tried to contact support apple (received the message "not available" 3 times)

    so I came here to help. I'm an iPhone very annoyed and angry user who decided after the death of this phone to switch to a Droid device. Until then, I'd like really the application of new return.

    Hello

    Click on the link:

    News of Apple by Apple

    https://appsto.Re/us/KFxK_.i

  • SSD disappeared after update

    Hi people,

    I just did the last update of El Capitan on my Mac Mini 2011, 10.11.6, as well as the removal of Team Viewer (after the recent security issues) and reboot, the OS disk just disappeared.

    It has 2 drives, a Samsung SSD 840 and 2 TB HDD; the SSD is the startup disk.

    I started from a SD card and can not see the SSD drive in disk utility, nor I see the car at all from another Mac so start the Mini into disk mode target (also using disk utility). The regular reader of 2 TB appears in each case.

    Any suggestions on next steps?

    Thank you!

    Update: I tried another drive in the same Bay, and it works, so the Board and wiring are OK. Tried the SSD again after re - install and still nothing. Looks like the SSD is dead unless anyone can offer something different...

  • Windows Live contacts (MSN messenger) disappeared after update of Skype, affects now all devices

    Hi all

    Updated to version 7.7 and suddenly all my windows live/msn contacts have disappeared.

    check my other devices and the same thing happened (another pc and mac)

    Have passwords reset.

    Once all my Skype accounts + microsoft + facebook.

    still no job.

    Any help would be greatly appreciated.

    Many thanks and best wishes,

    T

    I have re-bound all my accounts
    Changed my password for my Skype and microsoft has and their game.

    Recorded in Skype using my microsoft account
    After 2 minutes my contacts have begun to appear, and after a few minutes they began to get online.

    Skype Online filter is still broken and does not open msn but if I go to the messenger tab it all works.
    I can live with this question.

    Congratulations to all and have a GREAT DAY!

  • 10 windows network discovery broken after update 6.5.2

    Today, I decided to implement the actions of ReadyCloud and discovered that I needed to update my firmware to do this. The NAS then update itself 6.5.1.

    Just about everything (including the new shares of cloud) works, except for one thing: access to the network Windows 10.

    Can't seem to find out reliable NAS on two different windows 10 machines on the local network. Under explore > network you can actually see the NAS appear for a second, then disappear, then reappear etc.. A Windows 7 machine on the same network has no questions!

    I have since discovered that the firmware 'update' is not up-to-date, but installation manual 6.5.2 did not fix anything. I also discovered that if I manually have to map a drive to a location on the NAS Server I can navigate it very well. If I try to navigate by opening the SIN of network locations, the newly open Explorer window closes as soon as the SIN disappears from network locations.

    Here is the configuration:

    * The RN104 with firmware 6.5.2

    * Services SMB, HTTP, and HTTPS are the only ones to be activated

    * Volume 1 X-RAID on 3 discs

    * 1 USB external drive

    * Active ReadyCloud (no other cloud services)

    * No apps running / installed

    Network clients:

    1 x Windows 7 (works fine)

    2 x Windows 10 (works mapped drive, network navigation does not)

    Hoping someone can enlighten us!

    (edit: I probably would add I did obviously, as reboot all the machines in question)

    I see that your logs are invaded by Discovery WSD service-related messages. I you sent instructions on how to upgrade to a more recent version of this service.

    It seems that you used to have two volumes and the NAS still has references to the volume that you destroyed in its config that must be cleaned.

  • The network card failure after update of Windows 10

    I suddenly had no network connection after upgrade Windows 10 (June 14, 2016). After the restart, I had a big red x, the symbol of my network. Click Troubleshooting and gat the message that my Killer NIC 1535 had driver or hardware problems. Tried system restore, but that did not work (restoring the system has no take0 even after disabling my anti virus. Also my Windows 10 settings no longer appear Ethernet option. Anyone has a solution or work around, if someone has encountered this problem?
    My PC has been updated the same day and he had no problems. He still has Ethernet option.
    I have an Alienware 17R3

    Hello

    Please write to us!

    Kindly click on the link below that may help you.

    Windows.Microsoft.com/.../Fix-Network-Connection-issues

    Tad service kindly private message and your email address.

    Thank you

    Robin

  • Windows apps disappear after update 8.1 automatic windows and keyboard do not work on the internet

    I've had my Toshiba Satellite for 2 months, but after the automatic update of the Windows apps disappear and the keyboard does not work when I go online (I can type when I connect as a guest, but I can't type as an administrator).

    Can someone help me, in steps (I'm not a computer wizzard).

    Alexander of Amsterdam

    Hi Alexander,.

    Thanks for posting your query on the Microsoft Community.

    Thank you for details on the issue. That your applications Windows disappears, I suggest you follow the methods below:

    Method 1: Troubleshooting applications.

    The apps store can automatically detect and fix any incorrect settings or errors that could cause problems with applications.

    Refer to the article below and try the steps in it.

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

    If the issue still persist, then follow the method below.

    Method 2: I suggest you to check if the applications have been successfully updated. See the procedure to check the updates below:

    a. press Windows + C keys in the app store for Windows.

    b. click on settings and then click App updates.

    c. click Check for updates and install available updates.

    If the issue still persist, then follow the method below.

    Method 3: Follow the steps below to give permissions to All THE APPLICATION PACKAGES.

    a. go to Program Files (make sure that "hidden files and folders is on").

    b. right-click on WindowsApps and go to Properties > Security tab > Advanced.

    c. click on continue to display object permissions.

    d. for the owner, it will show TrustedInstaller, click on change.

    e. a new window will open to certain Types of objects > select groups , and then click Ok.

    f. in the text box below to type All THE APPLICATION PACKAGES.

    g. press Ok and restart your system.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

    Thank you.

  • Why the subjects in my project RoboHelp disappear after update to RoboHelp 2015?

    After the upgrade to a RoboHelp 10 to RoboHelp 2015 project, all the themes of the project are deleted when the subjects are then updated. The project is a document linked FrameMaker - updates as planned, but when I update the headings, one of two things occurs:

    1. Links are broken and all the topics appear in the 'Broken links' folder, or
    2. All subjects simply disappear.

    (Running Adobe Tech Comm Suite 2015 on Windows 7, 64-bit; RoboHelp being updated to v12.0.2.384; FrameMaker, set updated to v 13.0.2.433.)

    I had a few successful update of the subjects if I update separately each 'chapter' in the book, but if I use the option "update all the ', the results are as shown above. And, as you can see, the results are not compatible. This happened with two projects that I have converted in 2015 of RoboHelp.

    I find no information about it in the forums. Screenshot below is included to show the effect of ' update all ' in a project.

    I appreciate any assistance with this annoying quirk!

    Carole

    RH 2015 update issue.jpg

    Hello

    I tried your steps exactly but it works very well at my end.

    Try this: in the project folder there is a file named .cpd, delete this file and re - open the project in RoboHelp and then update the book connected to FM.

    Try it and tell me if it solves this problem.

    Kind regards

    Manu of FIFA

  • Distiller disappeared after update

    My distiller disappeared as a printer option after that I installed the latest update for my Acrobat 9 Pro 9.5.2 I run on Mac OSX10.7.4. How to bring back my Distiller?

    Please visit http://helpx.adobe.com/acrobat/kb/cant-print-pdfs-mac-os.html

Maybe you are looking for

  • billing for msn

    I want to pay my MSN premium account so I can access my e-mail, can someone help me please.

  • Problem in the file video runing

    Hi guys,. I have a problem and need your help. When my computer launches a video or a website with animated images, after 15 minutes, the screen has several vertical lines and then my computer suspend.s I don't know what the problem is. Here's the ph

  • HP CM1415fnw does not print after awhile

    I have a HP CM1415 cold printer. LAN cable (WiFi turned OFF) IP fixed, located on the Panel of the printer No. "sleep mode" (permanently on) After that the printer is turned on, it works fine. After 10 to 30 minutes, printing is NOT possible. Windows

  • charging media center - product key is not valid

    I had to reinstall Windows 8 due to a failure of the drive. Now, I can not recharge the pack Media Center using the key provided initially. How can I reinstall the Media Center?

  • Creation of an altitude of a grid

    My apologies if this is in the wrong place.I need to find the coast of an area, using only an altitude of gray of low quality. Each pixel corresponds to a 100 m square, and only the exact Center of the pixel represented altitude. Thus, the coast is n