CronosPlus acquisition card or vision

Dear Sir/Madam,

I have a Cronosplus frame grabber company of Matrox card.

I have a project and I want to use this card in NI Vision 2011.

Please kindly help me how I can use it and please send me the drivers for this card to recognize OR vision.

I appreciate your kind help.

Best regards

Hello

This acquisition card is not supported by IMAQ Vision (as you can see here) to directly call the dll to take with this grabber framme.

Sincerely

Tags: NI Hardware

Similar Questions

  • Exposure / white - black voltage settings on the PCI-1410 acquisition card

    Hello

    I use a PCI-1410 acquisition card and have written acquisition software in Visual Basic .NET.

    In measurment studio there is a button that automatically sets the tensions black and white, based on the tensions of entry on the channel.

    I want this impliment into my VB.NET code.  I am aware of the 'CWIMAQ. BlackReferenceVolt "and"CWIMAQ. " WhiteReferenceVolt' properietes, BUT is there something that will automatically adjust the tensions?  I ask because I don't have background no function that will probe to find what is the maximum and minimum voltage that is nessasary to dynamically set the tensions.

    Thank you

    Jonathan

    Through the research forum.  If the solution below to create the IMAQVision control.  IM assuming that the reason why it wasn't available is because I do not have the license of installed vision

    Dim IMAQVision As New NationalInstruments.CWIMAQControls.AxCWIMAQVision
    IMAQVision.CreateControl)

  • What is the acquisition card OR 1426 compatible with a line/Linear array scanner?

    What is the acquisition card OR 1426 compatible with a line/Linear array scanner?

    I'm currently doing a feasibility study of the project that uses the NI 1426 and a linear Array Scanner acquisition card, and I would like to know if they are compatible with each other.

    Thanks in advance

    Martin

    Hi sandeepchinni,

    I agree with gunnesjr that we need more information about what you mean by Linear Array Scanner.  As he said if it is a scan line or an area then yes it will most likely compatible.  A small correction to what he says.  You need not buy NI Vision if all you need to do is to acquire images.  The framegrabber will be delivered with the software that is needed to work.  If you need to do any image processing then you need NI Vision.  The following knowledge base lists what is installed with the driver for the card.  Live that are installed with OR-IMAQ Vision Acquisition Software?

  • Allows you to control two app PCIe-1427 acquisition card program?

    Is it possible that NEITHER MAX poster image and a program of Uart control a camera through PCIe-1427?

    I'm designing on a FPGA board with a link to the camera, and the side FPGA generates the image of the target. and PCIe-1427 Council receives the image.

    I'm contrling the map via USB2UART FPGA, and MAX displays the image. This works.

    but instead of USB2UART, using UART is possible with the terminal program such as putty and teraterm via PCIe-1427?

    In fact, I can't because teraterm cannot see the PCIe-1427 uart port. However neither offers

    device driver, I think it would work.

    If there is the driver that shows the interface UART to PCIe - 1427 as normal COM port, where is it?

    If this is not the case, why is that this driver?

    And there at - it can access any other OR acquisition card that provides the link camera and COM port interface the other terminal program series?

    Thank you..

    Imperx software automatically find the port (I use Imperx camera).

    When the farmed grabber is installed and NEITHER-IMAQ is installed the software should automatically find the camera.

    Have you tried running the capture with Standard camera card? I understand that you create something special on FPGA.

  • Using the acquisition card in Labview

    I am considering the purchase of an NI PCIe-8242 acquisition card to go with my camera ace acA1300-200uc of Basler. I can't find any documentation on how to actually use the inside of a frame grabber Labview, and I'm very inexperienced with regard to the use of Labview. Anyone has any advice or tips on how I can use the acquisition card?

    For reference, I need start a video stream given a trigger to an different Labview vi, then take some pictures and save them to a directory on the computer in the first 30 seconds. I need to keep the video stream up to the end of the trial. But I can't save any video - only a few pictures.

    Thanks in advance!

    Although he needed the VDM, why would you recommend the duration?  He couldn't really use it.  It would be wasted money.  The only value to it is if you already have an application built using the VDM development software.  (which is more than one Service that is more than the card it looks)

    If you have no customer Service, certainly grab some cheap acquisition cards.  If you already have GOING, I would skip the tips here to blindly buy the card and test your USB3 ports prior to the purchase of surplus material.

    As far as how you would work with the BT acquisition card?  Really, you won't.  You will work with the camera that you plug in LV you won't see anywhere mentioned acquisition card.  In MAX, it'll be the camera.  In LV, you will use the resource name of MAX.  The acquisition card will just be additional USB3 ports.

  • How to find the time between two channels of entry in the data acquisition card or pci 6036

    Hello

    I read a lot-related posts on the simultaneous measurement of two input voltage of similar channels in map data acquisition. I know that the best material is "simultaneous measurments of the Series DAQ cards" but I only pci data acquisition card 6036 and I try to understand what is the time between the reading of the two channels . This period is always constant? (must it rely on a voltage (amplitude, frequency, waveform..). I send the sine wave (s) to the two channels and read the values of V, if they read the same value, the difference should always be zero but I get-0,002 to 0.002 Volt difference (I must find a way to convert it in time). A screenshot of my VI is attached. I wonder how I can accurately measure the time delay between the channel.

    I am open to any suggestion, my final goal to read exactly two channels at the same time ((ou connaître le délai exact donc je peux correspondre les données correspondantes étant donné le temps de retard))

    Hi spinup,

    better you should post your question in the forum of LabVIEW, LabWindows/CVI is used

    Good luck.

  • Saving a file from an acquisition card .avi

    Hello

    I just got an delivered acquisition card. Model is the MC4 '' Source of imagery. With the acquisition card, they delivered a CD with drivers, including drivers for LabVIEW, so that I managed to do it working pretty quickly.

    What I want to do with the grabber is record 4 cameras, put the text together, put some of 4 images in the image and save it as a file .avi with 25 frames per second. With that, I have encountered several problems:

    1: I don't have the camera to record 25 frames per second.

    2: when I overlay the image with text, it displayed as expected for LabVIEW. However, in the video (that I've seen with Windows Media Player), the text was gone.

    Does anyone have experience with video processing? Any help is greatly appreciated.

    I'll post some of my code tomorrow, so that you can see what I've done so far.

    Here's an update:

    I had to call the method AVIStartCapture by invoking the node.

    Now, it works fine.

  • I am building a system and I need to help experts to choose the data acquisition card.

    Hello world

    I am currently working on a design project I need to take a data acquisition card that responds to the output of the amplifier. I'll build a force detection system which I have taken the following as detector and amplifier:

    http://content.Honeywell.com/sensing/Sensotec/pdf_catalog08/008834-1-EN_Model_UV%20Bridge.PDF

    http://content.Honeywell.com/sensing/Sensotec/pdf_catalog08/008638-1-EN_Model_53.PDF

    Please recommend me which data acquisition card I could take. The only requirement I ask is to have less than 0.1% global uncertainty.

    Thanks for anyone who can help

    Since your amp has - 3db at 7 kHz and you need only 10 bits 0.1% will do almost any card with.   USB-6009 is the lower end. USB-6210 the next step.

    Then take a look at some other boundary conditions: do you need it calibrated? (Is there a QM adj. who could ask questions?) Space?, EMC/noise, entry, differential

    Take a look at the USB-9237 with a conditioner bridge construction...

  • uninstall the USB 2.0 by youyan acquisition card

    I have vista 64.I cannot uninstall the EasyCap USB 2.0 capture card. I go to the control panel and click on uninstall, comes when I do setup.exe does not. My cd burner and dvd also quit when I installed it. (EasyCap USB 2.0 by Youyan acquisition card.

    Hello

    Try this free Revo program to remove it.

    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    See you soon.

  • 2014.02 - Bluescreen Windows 8.1 vision acquisition software (imaq vision acquisition express vi in labview)

    Hello

    I have big problems to install the Acquisition of Vision software to Windows (64-bit) with installed LabView 2013 SP1 (32-bit) 8.1. He finds himself in a blue screen after the computer is restarted.

    My main problem was that I only had 'Vision Acquisition' express vi LabView 2013 SP1 Windows 8.1. So I installed this VAS2014.02 (http://www.ni.com/download/ni-vision-acquisition-software-2014.02/4584/en/) and it solved the problem, the vi in labview and works fine until I restart my pc. Because after the restart of the blue screen is coming. After several times of blue screens it came Windows 8.1 recovery menu. By selecting "Help for starting" or something similar (I have German OS) in "Advanced Boot Options", the system could be recovered with relatively little loss of data (work today has been lost, only yesterday the files were there). So I repeated the installation of VAS2014.02 and once again the same: blue screen after restarting Windows 8.1.

    It is not compatible with it?

    (but it is: NEITHER Vision Acquisition Software 2014.02 - Windows 8 32-bits/8 64-bit/7 64-bit/7 32 - bit / Vista / XP 32-bit/Server 2008/Server 2003 R2 32-bit)

    What can I do to use the Vision Acquisition express vi into labView 2013 Sp1 Windows 8.1? I had lost the good part of the time today to operate without success. Thank you for your suggestions in tips!

    Michael

    Hi Michael,

    I'm sorry for the problems you are faced with customer Service. There is a known issue with some software components which ARE pulled inward, which will cause the BSOD you see. The problem is examined formally at the moment, but in the meantime, the simplest solution is to remove the stand from the IO IMAQ for R series cards (1483, 1473R, 8237R, 825xR) as described here: http://forums.ni.com/t5/Machine-Vision/After-upgrade-to-NI-Vision-Acquisition-Feb-2014-Windows-does-.... If you require the use of these cards, there are other workaround solutions for which you can contact OR support that is formally addressed.

    Kind regards

    Joseph

  • Imaging Source DFG/SV1 acquisition card is not correctly recognized in LabVIEW 2009

    I have an Imaging Source DFG/SV1 frame grabber/capture card (I think that this example uses a Bt878 chip) that I am using with LabVIEW 2009 (Fall edition 2009 academic Site license), including elements of acquisition of vision (NEITHER Vision, NOR-IMAQ (4.3) OR-IMAQdx (3.4), etc.). I have all the latest sources of imagery support drivers and software for the Board of Directors (http://www.theimagingsource.com/en_US/products/grabbers/dfgsv1/ drivers: v6.0.3.0, IC Software v2.1 and IC Imaging Control v3.1) with drivers being compatible DirectShow. The DFG/SV1 is detected in MAX under devices NOR-MAQdx / DFG/SV1 / cam0 and I can grab and preview images, however to 320 x 240 resolution, I have a higher resolution camera and know that the jury is capable of greater resolution using IC software manufacturing and also via TWAIN with ImageJ software drivers. Interesteingly, if I try to acquire an image of the card purchase using the Vision Assistant, the DFG/SV1 card is not recognized as a card acquisition, but listed under IEEE 1394 or GigE peripheral, revealing with it being direct device that I can't understand. Despite this I can acquire images, but I am limited to 320 x 240 format and change the type of image (RGB, UYVY etc) causes an error. Once again, oddly enough, I can use "enter and select mode example VI" which should only be compatible with IEEE 1394 cameras.

    I'm not sure why LabVIEW is not seen this card properly, I contacted Imaging source who were also intrigued by the fact.

    Any information on how this could be resolved would be much appreciated.

    Thanks in advance.

    Hi OCastell,

    With this Council Imaging Source, the only interface supported with drivers of NI Vision Acquisition is through using IMAQdx DirectShow interface. It is possible that their DirectShow driver does not properly support all of the capabilities of their Council. Given that ICR software and TWAIN support can be routed to a different implementation of one of the DirectShow support, you can see the different features available. Unfortunately, you probably go through Imaging Source to determine why their DirectShow driver does not support the full resolution. You can confirm that it isn't IMAQdx this limiting trying other software such as Windows NetMeeting or AMCAP DirectShow and see what capture resolutions are listed.

    Because the DirectShow interface is managed by IMAQdx driver, it will not be detected as a framegrabber IMAQ using the IMAQ driver. This is expected since it fits in the same category as firewire and GigE Vision cameras and is supported with the IMAQdx driver instead.

    The "Grab and select the Mode" example VI isn't really specific FireWire, although he was certainly intended to highlight the various video modes that generally expose FireWire cameras. Since the DirectShow devices are similar and have several selectable video modes, it's why he's probably working. In any case, IMAQdx abstracts usually differences between all supported camera types and in general a single VI can run on all cameras IMAQdx-taking in charge unless you rely on buses or the camera-specific features.

    Regarding Vision Assistant marking the camera as 'IEEE 1394 or GigE', I think it's just an aesthetic issue (which may already be fixed in new versions). When IMAQdx was out, these are the supported types of cameras and so Vision Assistant was trying to say clearly what driver was used for the type of device. Now that IMAQdx supports a multitude of new interfaces (including DirectShow and some IP cameras) that the label is inaccurate.

    Finally, looking at the specs for this capture card, it looks like a standard reference BT878/848 model and then you could try potentially replace your Imaging Source driver with one here:

    http://BTWinCap.sourceforge.NET/

    I used this with a with IMAQdx BT878 capture card and can get it to capture an image full resolution (but of course, your results may vary...). It goes without saying that this solution using DirectShow is much more limited than using an industrial camera on 1394/firewire or a framegrabber IMAQ.

    Hope this helps,

    Eric

  • Synchronize the analog continuous entry and continuous analog output using the unique PCI6024E data acquisition card

    Hello

    I want to generate the continuous signal and at the same time I want to read that signal that I generate using a single card DAQ. I want to generate signal and the received signal is synchronized and in phase.

    I looked at several samples on the sync, but it quiet confusing. One using the same clock of entry while the other use a trigger to start. I use the PCI-6024E DAQ card.

    Can someone help me in this regard?

    In two of these screenshots, the task to HAVE started first (that's what you want, because it is the task of the slave).

    Typically for AO, you can simply write a unique period of your waveform, and then regenerate again and again.  Your waveform would be preset before the task starts.  If you need to update the waveform on the fly according to enter programming during execution of the task, you would disable the regeneration.  In addition, if the wave form is such that it cannot be easily represented by a predefined buffer (for example, it is a strange frequency which is not a same ditch at the bottom of the sample clock), then non-regeneration is the way to go.

    Best regards

  • Imaging multi channels using the acquisition card OR

    We have a 1408 IMAQ being controlled by LabVIEW 8.0.

    We want to install multi-channel of imagery. All the channels work individually. However, when I was trying to show two channels simultaneously, single channel works and I got the following error message:

    Error 1074397150 has occurred to IMAQ enter Setup.vi

    Possible reasons:

    NOR-IMAQ: A timeout error occurred while you wait for the specified event. If you expect a picture, make sure all the video data is acquired during the period. If you wait for a signal, check that the assertion of signal occurs within the period.

    Sometimes I get a different error message asking me to assign different buffers to both channels. I understand that IMAQ 1408 has only analog digital (ADC) converter to digitize the incoming video. It may acquire up to four different cameras, but only of a camera at a time.

    I don't mind do frame rate in half. I think to show only one channel at a time and do the two channels alternantly. But I need to know how config routes to get there.

    I've attached an example that should work.  I could not test it because I don't have the equipment, so it might need some settings.  I would test it with one channel by setting the channel # 1.  Once it works, define channels # 2.  I set the display to use snapshot mode so the same image can be used for all screens.

    The only reason that I can think of that would make multi-channel acquisition fail when single channel works is the lack of synchronization between signals.  The start of frame signal must be the same for all channels.

    Bruce

  • Aero Glass problem? saved only in black and white video acquisition card: clolour sceme changed temporarily Aero in Vista Basic: I have Vista home premium, 32-bit

    video capture card via USB to the PC... everything works but only in black and white and info: perpetual sceme changed temporarily Aero in Vista Basic:

    What is the reason why it is black and white?

    .. and if so: how to change? I have Vista home premium, 32-bit system (PC bought in 2007)

    can anyone help?

    Hans

    Hello

    1 have had any changes made on the computer before the show?

    2. who is the manufacturer of the video capture card?

    3. If it works well before?

    4 is the issue limited to the video capture card?

    Method 1:

    Check the link and see if it helps:

    Solve problems with Windows Aero

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

    Method 2:

    I suggest also refer to article and change the theme:

    Change desktop theme

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

    Method 3:

    I would also suggest update you the graphics drivers on the computer and check if the problem persists.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • software acquisition card

    I brought a student and teacher edition card .i'm unable to download the software avtivate

    Hi JoGrimesMia

    Please visit: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

    http://www.Adobe.com/eEurope/products/activation/

    Or contact Adobe Support: http://helpx.adobe.com/in/contact.html

    We also invite you to contact our support at http://adobe.ly/yxj0t6 team

Maybe you are looking for

  • Remove master password

    How can you take the password off of acer 5510

  • I want to go back to windows 10 Windows 7

    I want to go back to windows 10 Windows 7. My dear friend, please help me, you know what happen to me? I have windows 7, I got 10 free upgraded windows then I am facing many problems internet ect... same time I lost my old windows also so I download

  • BlackBerry smartphone email messages

    I have 2 email addresses that I use on my Blackberry "BOLD". Both used to work properly. The gmail address still works. Recently, I had problems with my business e-mail on my company domain. He received e-mails on my Blackberry, but then they disappe

  • Refine the big big problem with edge

    HelloI'll try to be understood. My language is french, but I can't find a solution to my problem, so I'm here.I just downloaded Photoshop on my new computer. Before, I was using on my old. So I tried some manipulation just to make sure that everythin

  • Why does he not use filter Gallery? Photoshop gives me ERROR

    I can't use the filters Gallery, the image is RGB, but Photoshop gives an ERROR: No. is pueden asignar mas azulejos office