Cross-origin request blocked: the same political origin does not read the remote resource

Similar Questions

• CD player does not read the series Satellite A recovery CD

  Hello

  I have a laptop my father gave to me and I need to restore it before using it for me because it works very slowly.
  I have the restore cd but I have problems with the cd player.
  It does not read some CDs, but it will not read the cd recovery so its as if it is not there.

  Is it possible to restore it without the cd? I'm not very super-friendly up with computers, so please simplify if possible.

  Any help would be appreciated.

  Thank you

  Claire.

  You can try to boot from the original CD of Microsoft Windows.
  Check if this CD is readable.

  Then you can download the drivers from Toshiba from the European driver Toshiba page and could install the drivers

  A few words about the CD drive problem, it seems that the goal of readers can calibrate in the right position and therefore some CD or DVD is not readable
  In most cases, the CD/DVD drive should be replaced to solve these problems

  See you soon

• Satellite L650 - ODD does not read most of the CD or DVD after BIOS update

  While DVD copy, asked me to do an upgrade of the bios for the included software on my laptop, so I thought that coming from toshibsa, it must be safe. I closed all my apps and let the update occur, restarted my pc and tried to continue to copy my dvd.

  Now my dvd writer does not read most of my CD or DVD, original as well.
  I managed to get hold of my previous Bios version after a battle before the update to see if I can go back to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it.

  Any help would be greatly appreciated I have two days to copy 100 DVDs for a customer and I can't do it now,

  I have a laptop Toshiba Satellite L650 running windows 7 64 bit 8 GB memory with a SSD hard drive

  > I can return to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it

  I don t think that the BIOS is the problem here, the point is that CD and DVD support details are stored in the firmware of the CD/DVD drive and NOT in the BIOS of the laptop.
  So in my opinion the update of the BIOS is not the reason for your problem.

  I think you should check if cleaning the laser lens allows you to read discs.
  Use a fluid wadding tip and alcohol to gently clean the laser lens.

• CD player does not read the CD

  Original title: Windows Installer 4.5 on a computer laptop gateway running windows7

  I tried several things with windows install 4.5. I even tried sfc/scannow, and who came back under the name of no violation. The only thing I have not tried is the clean utility windows, that will help? Who's going to make me lose all my photos and music and information stored in the school's computer? The reason why I am trying to solve this problem is because the Player reads any of my software cd HP, Polaroid and Microsoft2010?  someone please advise

  Hi fredibar,

  1 are. What utilities you referring?
  2. what exactly is the problem with Windows install?

  As the CD/DVD drive does not read the CD, we need troubleshoot CD player. We do not think that Windows Installer is related to the CD player.

  To fix the CD/DVD read the issue, try the following steps:
  a. see your CD or DVD drive cannot read or write media
  b. click Run Now button and run the tool successfully.
  c. restart the computer and check if the CD is read by the CD/DVD drive.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My star bookmark icon does not show my favorites already recorded. My Favorites still exist just unordered, bookmarks section that the star icon does not read the

  Hello. My Bookmark star icon does not read my favorites. I can always use it to record the new bookmarks, but I don't see the 'old'. My Favorites are still there, but the star remains white when I open them and shows them as not saved. Thanks in advance for any help!

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  When the star is to check the Bookmarks Manager, he must control
  all the entries in the file. It could be that the bookmark of the webpage has been deleted.
  Or the sea address have changed. I'm not aware of entries to the
  bookmarks being blocked, unless you have something blocking the changes.

• The CD/DVD drive does not read discs

  Hi, I have a COMPAQ Presario CQ40 with optiarc DVD RW AD - 7561 ATA Device driver, recently the drive does not work properly. It can read and burn the disc, that I already used, but when it's a new (disc white) it does not read the disc.  It has an error message "make sure that the disc uses a format windows recognizes. If the drive is not formatted, you must format it before you use it. "the disc is the format that would recognize the system.  I tried to uninstall the drivers and reinstalled from the Device Manager, but nothing works, tried too much microsoft fixit, always the same.  Hope that there is another work around here... Thank you...

  Have you tried using other burning software?

  Try this free you see if you receive messages.

  http://CDBurnerXP.se/

• My laptop does not read the dvd, but another laptop computer bed. PL advise solution. Thank you

  My laptop is Pressario V2000. My laptop does not read the dvd, but another laptop reads the same dvd. PL is the solution. Thank you

  Try another DVD to verify that your laptop can read at least the other DVD.  If he can't play other DVD's then you need to replace the DVD - CD ROM drive supplied with your Pressario.

  Another thing you can try is to check fingerprints or scratches on the DVD, some DVD players are more sensitive than others.

  J W Stuart: http://www.pagestart.com

• MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE

  MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.

  I DON'T KNOW WHAT IT IS.

  I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.

  IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.

  HELP PLZ

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 - DVD does not read the disk on the computer.

  My DVD does not read discs, when I click ion DVD player on my desktop shows insert a disk me error help

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: Satellite A200-1N7 does not read the SDHC card using Win 7 32 bit

  Hi all

  After that I installed windows 7 32 bit on my laptop, it does not read my sdhc card.
  And he did it when I got Vista.

  Can someone help what to do?

  Thank you very much:

  Adry

  Hello

  Have you installed the driver for the card reader?
  Have you noticed an unknown device in Device Manager?

  Please see the page of European disk from Toshiba for the card reader driver.
  Satellite A200-1N7 belongs to the PSAE3E series
  I found the driver of the card reader for Vista 64-bit
  Usually the Vista driver should work on Win 7 OS too

  If this does not work, then try the drivers released for A500 or L500 series!

  Welcome them

• Satellite P200-140-CD/DVD drive does not read the CD

  Hi all

  I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
  I've updated the drivers, cleaned the lens, completed all the normal tasks.

  Any advise / solutions out there?

  Hello

  Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:

  (1) run regedit (Start-Run-Regedit online online)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  I hope this works for you too! :)

  Good bye

• iPhone 6 does NOT read the SIM cad

  Suddenly after serving more than a year our 6 Iphone does NOT read the sim card. Area of the sim card from the iPhone 6 to our iphone 6 plus the card works well. And the sim card in the iPhone 6plus does NOT register in the iphone 6. So I guess that it is a mistake in the iPhone 6. We think the 'operator' menu item is generally absent in the iPhone 6. Anyone in the community has a solution this problem of reading.  The two IPhones are updated to IOS 9.2. Thank you

  my best bet would be the connector which connects with the sim tray is default

• Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

  Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

  Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

  When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

  iMac (24 inch, early 2009)

  Processor clocked at 2.66 GHz Intel Core 2 Duo

  Memory 8 GB 1067 MHz DDR3

  OS X 10.11.1 (B 15, 42) El Capitan

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati

• My multihandy 3050 flow meter does not read on my computer am not download the driver for it what should I do

  on my laptop the meter does not read and he tells me that the driver is missing, but when I try to download on the site the hydrotechnik nothing happens

  TeeGee

  You should probably contact the meter manufacturer.