Cross post: Approximate color match?

Similar Questions

• Don't color match images in FCPX

  Hi guys

  I am looking for color match two images in FCPX but when I select the clip, and then the color match, then click on the image, I would like to take advantage of the color palette (and hit apply) nothing happens.

  Is it not possible to color images of football game in FCPX?

  Thanks in advance

  When do you do that? You always hear images?

• Tecra M4 S435 US Version Bluetooth antenna - cross-post

  Hello

  It is a cross-post from the Commission of TE and Tecra message. I decided to write, because I'm not sure I'm supposed to use my Bluetooth antenna for. It's a mystery to me. I bought a pre-configured Tecra M4 with Bluetooth antenna (I don't think it's the same as the Bluetooth Module) and I can not connect any bluetooth device. Also the FN + F8 does not work. Can someone explain to me please what is the Bluetooth antenna.

  Thank you
  Sevi

  Hello

  Check this site:
  http://cdgenp01.CSD.Toshiba.com/content/product/pdf_files/detailed_specs/tecra_M4-S435.PDF

  You will also find compatible parts for Tecra M4.
  You can use the Bluetooth PA3425U-1BTM Toshiba compatible module kit

  Well, this Bluetooth module you can order from Toshiba service in your country or if you use any other device Bluetooth (Bluetooth USB or Bluetooth PCMCIA card key)

• Color matching

  Hello

  I have recently updated Pages v5.6.1 and have noticed that the color matching option is now missing when I select 'color' of the Inspector. I don't know what the correct name for this feature, but it was the one where you can choose a color you had another place used in the document - other text or image select this exact shade. The chart for him, it was like a show (of... a Canon?).

  Is there another way to make in the current version?

  In the color picker, the (loop or pipette) color picker is indicated by the arrow in the picture. Click on that and put it on a color.

  

  

• The use of color matching with a webcam

  Hello

  I have a webcam which I am able to use successfully in labview (i.e.. Get images)

  I looked at the examples of criteria special color and tried to change them, so that I can detect a red spot, which can be seen through the webcam, but were unsuccessful.

  Basically I'm doing color real-time pattern matching

  Can someone point me in the right direction? Or help out me?

  Thank you

  Hi guys,.

  It is an excellent example that installs with the vision development module. This example maybe not EXACTLY what you're after, because it allows you to dynamically set a color model to match. However, you can still save a static "model model" on the disc as well as the use in your code - if it is more relevant to your application. As a bonus in adding, deleting the dynamic learning model would simplify the code a bit.

  Example of model color matching

  When ni.com research or the finder for example LabVIEW, do not forget to specify the COLOR the American way... color.

  Thank you

• [LAVA Cross Post] CTRL + SHIFT + Alpha shortcuts do not work in LabVIEW

  Cross-post from the LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/

  Bug Synopsis: CTRL + SHIFT + Alpha shortcuts do not work in LabVIEW. In particular, CTRL + SHIFT + Z, CTRL + SHIFT + E and CTRL + SHIFT + S

  Test installation: 32-bit LV2012 with the patch of f1 running on Win7 64-bit inside a Parallels VM in OS X 10.8.1 8

  To sum up the tests, I tried:

  • Several different combinations LabVIEW, guest OS and host OS all fail, including:
  • • LV2012f1 32 and 64-bit and 32-bit LV2009
    • Win7 32 and 64-bit and Windows XP x 64
    • Parallels and Parallels 7 8
    • OS X 10.7 and 10.8
  • Capturing the keyboard to the virtual machine
  • Turn each keyboard setting possible on Parallels, guest and host
  • Reinstall the keyboard drivers
  • Connect a checked keyboard that works on a native Windows machine
  • LabVIEW.ini deleting and letting it regenerate
  • Remapping the shortcuts, for example, CTRL + SHIFT + E to CTRL + E - in this case, 'Show project' works, so this may indicate that it is a problem registering the shortened press, do not invoke the action itself.
  • Sending via the keystrokes on-screen keyboards of guest and host
  • Sending the sequence of keys via SendInput by user32.dll WinAPI
  • Test every imaginable combo of SHIFT, ALT/OPTION, FN, COMMAND/CMD, CONTROL
  • Reinstall the virtual machines from scratch and relocation of LV
  • Here's a kicker: CTRL + SHIFT + Alpha shortcuts work very well on other windows programs (I tried 4 different programs, including Chrome, Notepad ++, Paint.NET), but it does NOT work for VIPM with CTRL + SHIFT + C. This means that only two programs where there are CTRL + MAJ + Alpha bugs are both related to LabVIEW.
  • Here's a better: it is only CTRL + SHIFT + Alpha shortcuts with the prob - CTRL + SHIFT + 3 properly active / deactivates grid alignment and the "tools > Options > Menu shortcuts" will record any shortcut CTRL + MAJ + Non-alpha; He was not only meets the shortcuts CTRL + SHIFT + Alpha.

  New idea of troubleshooting is highly appreciated; Please feel free to jump in here or on the LAVA.

  X. says:

  Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade the latest versions to see if things have become more.

  Any news on that?

  @mellroth has found the solution :-)

• Color match CP1518ni on Mac

  Recently got a new mac for use with my CP1518ni and the color is TERRIBLE!  All the corresponding color talking about support PCs... any help in colors on a Mac?

  Have you tried to change the color matching options in the advanced print settings? Try this:

  1. open an image in the preview and open the print dialog box

  2. click on "Show details", left down

  3. open the menu drop down and select "color".

  4. click on "ColorSync".

  I would use the preset automatic once you choose ColorSync to see how it works. You are able to set up different predefined settings that you can modify according to your preferences. Let me know if that solves the problem.

  -Sean

• Data are blocked after Auto Color Match

  I used Auto Color Match to match a shot with another degree. He did a good job, but it blows too much. I want to be able to bring back the signal that it is the engine too hot. I added a layer of primary air and tried to bring back the gain, but it decreases the rather restrained signal than to bring back data that is already there.

  I'm doing something wrong?

  Is not correct on how that fix works. If you mash the black or blow the whites on a node, then in a node downstream decide to bring this information, you can do in this node. It is the definition of the work in a 32-bit float color space. The float, referring to the fact that the data values FLOAT and are not cut. If Speedgrade values of clipping during his visit to a layer then it is not a 32-bit float environment. Unfortunately, it's a show-stopper for the work I need to do. Guess I'll stick with determination. I hope for Speedgrade catch up here someday, I'd like to be able to use it in production.

• Color match Photosmart D7260 with iMAC

  Hello, I have an iMAC Intel Mac running on OSx Mountain Lion 10.8.4.  All software are up to date including the printer driver software automatically updated. When I print pictures in color, the colors do not match. I got it correspond exactly to 100% in the past. Does anyone have a solution for me?  Thank you!

  Well, I understood what is happening. You don't have a color ICC profile on your computer for this printer.

  Why?

  Because you use the Apple HP drivers for this printer. This isn't necessarily a bad thing. However, it is not the same to have full feature software and drivers that come on the disk with the printer or download it from the HP website. The bad thing is this printer is not only the software for your version of Mac OS X. It's a pretty old printer and there been no drivers and full software functionality of HP since OS X 10.6.

  I'm sorry, but you need to upgrade to a new printer or doing without ICC profiles

  Kyle

• Color matches do not CA, AE and HAVE

  Hello

  I have a character who must be animated to host character without arms attached. The arms are added in After Effects. The character was drawn in Illustrator.

  I am the character as a PNG sequence, and the arms are two static PNGs

  For some reason any, whenever I bring you the sequence of PNG of the head / torso in AE, the color saturation is skewed higher than the actual color. This translates the arms looking for obviously as separate pieces.

  Is there a way to solve this problem in animation character until I give in? If this is not the case, how can I do to solve this at all?

  Any help on this would be appreciated.

  Thank you.

  What is - this - the PNG is always saved as RGB, CMYK not. I suggest to change your original RGB file and then everything must match throughout the entire workflow.

• Color match

  Hello I would like to make a matching color between 2 photos with lightroom?

  Hi julien.carto,

  Why do you want to match the color of two images?

  See if that helps. Match between photos in Lightroom color balance to prepare family/wedding albums | Community customer Photoshop family

  See also how still shots of matching colors and video Clips using Lightroom 4 - YouTube

  Kind regards

  Assani

• Color match and yet serious type effect

  Hello

  I found this picture of an old book cover. I would add another type that seems to match the police, color and effects (bevel, relief, etc.) used to "London".  I have a font is close enough to use (the 'TEST'), but I'm a little hurt with the color and effects.

  For color, if I sample the color inside the type "London", its too light when I try to use it to 'TEST '. Is it possible to match exactly?

  No one knows what effects will get the same results as what's on 'London '? I've attached a screenshot of my Panel of styles of current layer to the layer of 'TEST '. Thank you!

  

  

  Part of the problem is the choice of the police, which is much thinner than the sample of London. Also the color not so bright. More in a moment.

  The third important consideration is the fact that the surface texture which is manifested in the letters from LONDON, appears in the TEST sample, and he should be able to look authentic.

  To put this texture in the type, change the Lab Color Mode that separates the colors of tone & texture. Choose the channel L. Select one area of texture at least as large as the area THAT TEST occupies. Then back to RGB and paste, as an extra layer during the TEST. Set its blending mode to luminosity. Last, use your TEST type layer to create a mask for the layer of brightness (texture) so that only the type is affected by the addition of the texture that you copied layer L of the laboratory.

  Finally, adjust the opacity of the layer of texture and change the color of the type to match in LONDON. The color must be done after the texture has beeb applied.

• How color match in Photoshop from an external site?

  I'm trying to match a red color on my website [link deleted] banner and I can't figure out how to get the color code of my site Web in Photoshop. Someone at - it ideas? Thank you!

  Read this:

  My colors are different outside of Photoshop.

  Once completed, create a screenshot of the Web site and use the color picker to sample the color.

  Mylenium

• Why Lightroom color match not during editing in Photoshop CS3

  I just started using Lightroom 4, the only version of lightroom that I used. Short version, save me lots of time. But I went to change more in photoshop and noticed that the color is radically different. I have Photoshop CS3 (10.0.1) and ProPhoto color space is to match to lightroom. I have make changes in lightroom, say remove dust spots, it appears in the version of photoshop. It seems that, in the shadow of the coast is where it really shows. My workflow would be to import to the original raw in lightroom 4 (1 5 d mark II canon) and go on changing. Right-click to edit in Photoshop CS3, and it is where the colors go crazy. So if I save the file with any editing done in Photoshop and compare side by side in lightroom, they are completely different. What is the origin of the radical difference?

  

  Here are the screenshots where the screenshot left the original image is the image dark and light, this is what it looks like when opened in Photoshop. Compare it to lightroom on the screenshot on the right, this is what it looks like when I saved the file in Photoshop. Then, how open it in Photoshop, then hit save the change of image? If I do edit in lightroom and then export the jpeg and open in photoshop, I get the correct color, exactly the same as my original lightroom raw.

  My external editor in lightroom settings are tiff, space colorimetric prophoto.

  Photoshop preferences are to preserve embedded profiles.

  If she does not make in Lightroom, it is absolutely false. CS3 uses ACR 4.x, which is not compatible with the LR4 2012 process.

  You must choose "Display in Lightroom" when it prompts or before opening in CS3. If it does not prompt you, try resetting your speedy deletions in Prefs-> General-> guests-> Reset.

• New Stallion posted Pantone color

  New version 1.1 posted for W520.

  You can use a USB sensor instead of the builtin with the Pantone software. I am curious of the results. I was calibrated using Native rather than D65. I think that the results look better. Too much green to D65.

  Update: I have applied the above profile. The difference between internally (native) compared displayed seems to be a bit less saturation of the blue channel. Am I missing something else? Thanks for the post to profile.