CS3 will not activate on the new hard drive after the failure of an old man.

Similar Questions

• I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after the use of realplayer download

  I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after using the lplayer rea download

  Hello

  We will try to download different video using different downloader (other than RealPlayer) and see if the problem still persists.

• I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

  I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

  Make sure you have cookies enabled for your browser.  Try using a different browser if the problem persists.

• Why my computer will not pick up my external hard drive?

  Why my computer will not pick up my external hard drive?
  using Windows 7 sp1

  Original title: usb

  Hello Fred,.

  Windows 7 sometimes has trouble recognizing external drives connected to the USB ports. There are a number of possible corrections for this.

  1. make sure you that the USB port in question works with another device, that you know works. For example, take a mouse that you know doesn't work and plug it into the USB port is connected. The mouse still works? If Yes, go to #2.

  2 do a reset power coercive.

  1. Unplug the power cord. Then (on a laptop) remove the battery.
  2. Unplug all USB devices.
  3. Leave it alone - don't connect or reconnect the devices for several minutes.
  4. After several minutes plug the power supply cord.
  5. Then install the battery.
  6. Turn on the computer and restart as normal without plug any USB device.
  7. Connect your devices one at a time and let them install as usual.

  The external hard drive works now? If not, go to #3.

  3. I have and others have used an application of part 3, the freeware Aomei Partition Wizard, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link). Once installed, you need only browse the external drive and select it, then click Properties. That's all; simply choose the drive is enough to get the drive recognized by Windows 7, no formatting required.

  I would like to know if one of these methods works for you. After back here with your results.

  Kind regards

  BearPup

• CS5 Design Standard. Will not activate on the new HARD disk following transfer of old HARD drive. Displays error 213.10 have number series/s etc.

  I recently encountered a problem with a HARD disk drive. So I had to replace it with a new one. Fortunately, I managed to recover the data and applications on the original disc.

  However when I transferred and installed after Adobe CS5 Design Standard on the new HARD drive it will open all Adobe apps.

  He invites a 213.10 error every time. I do not see where to disable or reactivate... Please notify suggested action plan.

  Also, I'll be able to successfully access my previous files after the relocation/activation?

  Thank you very much

  R

  Reinstall correctly. Activation does not work because in the technical sense is not simply there. Screw you them. Run the cleanup tool if necessary and contact support to reset the activations.

  Download the CS5 products

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Mylenium

• Windows 7 will not activate with the OEM key, after the failure of HARD drive.

  Hello

  I was recently asked to repair my brother DELL laptop.  The HARD drive failed and the system unusable.  I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media.  The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.

  The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid.  I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case.  The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.

  I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).

  Any help would be greatly appreciated!

  Thank you

  Brian o '

  Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC8177E3-D2B0-45ED-B79B-E129894262D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1225630707-1574482703-4192685535Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F804090409Time(GMT-05:00) Standard is03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
  Installation ID: 004806170012218410865063155553272544088463952332351022
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: initial grace period
  Time remaining: 43080 minute (s) on (29 day (s))
  Remaining Windows rearm count: 3
  Trust time: 31/03/2013-02:23:35

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  OSFR DELL WN09
  SSDT PmRef CpuPm

  you use an OEM SLP key that only works with the manufacturers recovery media.

  change the product key to that on computers of COA
  Click Start, type slui3, press ENTER.

  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• McBook hard drive is dead and can not install Photoshop to new hard drive

  Dear support team,

  Because of my McBook hard drive died, so I replace the new hard drive but I can't install Phototshop to my new hard drive because of the licensing problem. Help, please.

  What version of PS do you have? If you have CS6 & previously, you will need to contact Adobe to have them reset your license.

• How to use the photos saved on a new hard drive after a hard drive failure?

  My external hard disk drive is crushed when I imported and saved my photos to Lightroom.  The Lightroom catalog was not on this disc.  I had saved pictures.  I copied the photos and the structure of accurate records on my new hard drive.  Just use the 'Find all my files' option in Lightroom?

  Thanks for any help.

  Thank you!

  It worked, but my structure is as follows:

  Photos from Lightroom

  2004

  Jan

  Feb

  2015

  Jan

  Feb

  Softball Sting

  In Lightroom, only individual folders appear.  I have nearly 100.  Is it possible to change the display, so I only to recreate a link to the folder Lightroom Photos instead of each individual file?

• Reinstalling Vista on a new hard drive after the accident.

  Hi, I bought a laptop Lenovo, which came with Windows Vista SP2. Recently, my hard drive crashed and I got a new hard drive. In this case, can I re - install Vista with product key provided on my laptop? If it is possible, how can I get the operating system to install. Appreciate any kind of answers to my question. Thanks in advance.

  Hello

  Yes

  This is your vista license to reinstall on the same machine

  Contact Lenovo and ask them to send you recovery disks vista to reinstall the operating system as it was when you bought it

  http://www.Lenovo.com/us/en/index.html

  they do it for a nominal cost of $

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Then go to the lenovo Web site and download the latest drivers vista of your particular computer

• How to install Windows XP on the new hard drive after an old crashed?

  HI: my name is greg, my brother recently bought a used computer to replace the one he had, which crashed. Itrdidnt have a hard drive in it, so he put an in, he had then loaded the windows xp for the computer crashed, but after that, it could not authenticate the computer only it Noah has can you help me thank you so much Greg

  How to activate XP:
  http://support.Microsoft.com/kb/307890

  You can move the windows on a new computer

  If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on a single computer at a time (and if it's a Windows 7 Upgrade version the new computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.

  If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.

• L50 satellite will not start up - request password HARD drive

  Hello

  I hope someone can help me

  I have a laptop Toshiba Satellite L50 and when I start it, it says
  + no boot device please don't restart System.

  It is still under warranty because it was purchased only 6 months ago.
  I took it back where I bought it and they told me to contact Toshiba.

  I'm waiting on a reminder.
  I hope that someone can help you. He also asked that the HARD drive password.

  Where can I find this information?

  Hi Kym

  I guess the L50 Satellite cannot find the boot device (HARD drive), because the HARD drive was obtained with a drive password HARD and without this HARD isn't accessible disk password and the system does not start properly.

  Did you set this password for HARD drive in the past?
  I m request because this isn t password on new laptops. This HARD drive password can only be set by the owner of the laptop

  Of my knowledge if you know n t this HARD drive password, you will not be able to access the HARD disk in such a case, the HARD drive would be useless, and the data would be lost

  That's why I recommend you check if someone put the HARD drive on your laptop password where you n t know the password, you will need to replace the HARD drive and reinstall the system once more.

• Windows Vista will not complete installation on SATA hard drive

  I tried to install Windows Vista Home Premium 32 bit on a new desktop computer Acer X 1200 (less than 1 year).  Vista recognizes the drive, format and copy all the files on the disk installation.  Then restarts, is preparing to launch for the first time and get to the part where it says installation finished and hangs there.  The green progress bar does not move and it hangs indefinitely.  The hard drive is SATA and I put a new disc in hard, but exactly the same thing happened.  The motherboard has no IDE port on it and there is no option in the BIOS for the IDE emulation.  At this point I think the motherboard is bad, but I am working also on a laptop HP 1 year with SATA hard drive that does exactly the same thing.  The two systems are pre-installed with Vista Home Premium.  The two systems see the hard drive, but will not complete installation.  I even tried to run the WD Tools Data Lifeguard before installation with no luck at all.  There is no error message or error code, just of hangs and end no installation.  You have any suggestions for this?  Thank you.

  What was my problem I bought the equipment... like motherboard, memory, cpu, and video

  Vista would not be install.would blow on the end of the installation so I tried to put it natively and it worked!

• Resync after the new hard drive and battery failure - SOLVED

  I have Vista32 and Hotsync Manager 7.0.2 all works very well with my Treo 680.

  My son tungsten battery went to zero and I put it on the cradle without data now.

  Recently, I replaced my hard drive and have his registered user directory.

  When I sync, it does not recognize the user directory that I copied to My Documents/Palm OS Desktop / (username)

  When I create a new account it just creates the account and I have to manually reload everything.

  How can I easily copy all the old stuff from the tungsten to the computer?

  It was the same exact version of HotSync.

  I don't use Palm Desktop.

  I does not solve the problem but after 2 hours.

  (1) I have synced the tungsten, create a new user with empty data.

  (2) I then faked a dead battery by doing a hard reset on tungsten.

  (3) I then replaced my new data folder empty (under My Documents/Palm OS Desktop /(hotsync name) with my old data from my hard drive to backup folder.

  (4) I then did a hotsync, which now had the name of Hotsync to choose and feeling that it was a Virgin tungsten, all the old data has been reinstalled.

  (5) thanks for the help

  Message is about: Treo 680 (Cingular)

• Why will recogize Xp no my new hard drive of 1 Trabit

  I / v just installed the HDD (1 trbite). Why XP does not recognize my hard drive? I'm upgrding for windows 7

  Built-in disk management to prepare the drive.  To start the disk management tool type diskmgmt.msc in the box run from the start menu.

  John

• Re: Satellite L300 will not start and cannot restore HARD drive

  I have a L300 which stops just to start (after that the screen flash BIOS) with a single cursor flashing when I boot from the HARD disk. I can access the bios Setup and boot from the CD. I took the HARD drive connected to my external USB adapter on another PC and I can see partitions C and D and read the files correctly. I noticed that there is a directory called 'HDD recovery' on the D drive, but I don't have a recovery CD or another program to restore it.

  I found a boot of Vista recovery disc and it allows me to start a version of vista recovery but when I check the windows system can't find any errors. Also, if I choose the system restore then he says that he has no restore file.
  I suspect it's the disk HARD restore being Tosh files and Windows.

  Help someone!

  Paul

  Set the default BIOS settings and enter the Advanced Start parameters using F8 at startup.
  You can boot OS using the safe mode option?