Cs5.1 Extended on Windows 10 installation problem

Similar Questions

• Installation of CS5 Design Premium on windows 8.1 problem

  I'm unable to install my CS5 Design Premium on windows 8.1

  Whenever I get to the install page I get an error code

  "A (20) error occurred during installation"

  "Restart your computer and try again.

  I have tried a few times now and get every time the same mistake.

  Someone who knows what's the problem?

  Hi Bjorn,

  Design Premium CS5 is untested in point 8.1 of Windows, so it is difficult to tell if it will work with Windows OS 8.1 or not. You can follow the article: system requirements | Design Premium to check the system requirements for the same thing.

  Also, you can follow the articles: troubleshooting installation | CS5, CS5.5 and errors in the Installation and launch journal | CS5, CS5.5, CS6, CC and troubleshoot accordingly to try to make it work on your computer.

  Let us know if it works or not.

  Thank you

  Yann Arora

• Satellite M30X windows 2000 installation problem

  I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?

  Hello
  Make sure that the system BIOS and other hardware is compatible with Windows 2000.
  This article may also help.

  HOW to: Specify a specific HAL or a third party during the installation of Windows
  http://support.Microsoft.com/?ID=216251

  Good bye

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• iMac 27 end of 2012 windows 7 installation problems.

  Dear Apple community.

  First of all I know that the topic was discussed a few more times, but after I tried to follow the instructions and directions and patterns almost everywhere on the net I am a blind spot.

  I have an iMac 27 "end 2012. I managed to install Windows 7 with Bootcamp through a combination of different methods, on line. (downloaded the Bootcamp Support 5.1.5621 software as described in many forums)

  But I am stuck because I always have problems with my UBS3 ports that do not allow my keyboard and graphic tablet to work (I had to uninstall the app in safe mode to return to UB2) and the resolution of the screen that is only 1280 x 720 at the arrow, trash and other stuff that appear distorted.

  Since I'm on some architecture and 3D modeling programs in Windows I want to ask for help because I don't really know where to look further.

  When I solve the problem, I promise to write here a detailed method to install win7 on iMac late 2012 for those in need.

  Can anyone help me to finally get a solution? Thanks a lot for your time and looking forward to hear that here you.

  Hi Polfus,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your Boot Camp installation. If you continue to have unexpected behavior of port connections and display resolutions in Boot Camp, you can find the troubleshooting steps in the following article useful (my apologies if you've seen elsewhere / fact them):

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

  You can also check that you are running the 64 bit version of Windows 7, as shown here:

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Concerning

• Satellite Pro 6000: Windows XP installation problem

  Win98SE works well on my Satellite Pro 6000. I put XP on it.
  During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

  Save mode then also does not work, I can't see anything.
  What I've done wrong? It seems that the video driver is missing?
  With the recovery cd is everything works again. (win98se)

  Someone at - it solution to put XP on this laptop?
  Gr. R.

  Hello

  In my opinion, there should be no problem with the use of Windows XP on this unit.
  As far as I know the laptop came with WinXp pro, W2k and Win98SE.
  In this case, all required drivers are available and must be installed in the correct order.
  I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

• Windows Update installation problem

  When I turned off my laptop Windows Vista Home Premium, the system entered into mode "install updates". It has been the installation of update 3 of 8 for more than an hour. The display does not turn off and unplug the machine. The disk led is on continuously.

  Do I have a problem? Should what steps I take? Thank you.

  Hi jayalan,

  Welcome to the Microsoft Answers site!

  The updates take time depending on the size of the file. If the update has hung so I suggest you hard reboot the computer and see if you can boot to the desktop. If you can boot to the desktop and then the updates are not installed will appear and which will be installed during the next update.

  Once done with the step above after starting the computer on the desk. I suggest that reset you Windows Update components and perhaps that should take care of the updates. install the updates by selecting two both than some updates system needs to reboot for the changes to take effect.

  Access the link below to reset the Windows Update components automatically.

  http://support.Microsoft.com/kb/971058

  If the computer does not start on the desktop, then I suggest you to start safe mode and see if you can boot to the desktop. Once you are in the office, do a system restore which will take the computer to a time where it was working fine.

  Go to the link below for the procedure to start in Safe Mode and system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Let us know for if you are unable to boot to the desktop or to get help.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows xp installation problems

  Unfortunately I have no error message as such, first of all the toolbar menu bar and start disappeared in an irreversible way, at the same time that no executable programs would work, no sound would not play and only internet browser as well as wading through my folders and files was the only operational things. After an attempt to remedy this situation, I was told (online) to reinstall windows xp, this seemed an idea without danger at the same time, as I did before attaching unrelated problems, however, when reinstalling (or should I say before installation was complete) in one of the many process, the pc would restart and get to the device registration screen , from there, it's been jammed indefinitely, and flashing icons of many colors and forms have appeared and in some cases, replace a word or a number. (placement and Visual icon seem to be completely random)

  I also read (before attempts to reinstall) it could be a malware problems, well that sounded rather difficult for me, as the malware program would not start let alone clean all the above questions. I have redownloaded malwarebytes and again, unsuccessfully, to get any .exe program to initialize even. An error appeared in keeping it (unfortunately silly me, I had not planned this far ahead and has not copied the error name/numbers)

  I have tried many various difficulties through the system recovery and repair, but without success, I know it's not good to go, but any help at all would be greatly appreciated.

  * note * my usb ports are both issues and was not able to get the most recent of my files on an external hard drive etc, I would really like to come out of this with my hard drive in tact.

  Alternatively, you can attach your hard drive as 2nd drive or slave for other PC work and then just copy the data off the coast.

  Because of the strange characters and colors I would always start the recovery console

  Unfortunately it did not work and the same colors and icons appeared at startup boot via the controls proved to be without success either.

  I have yet to try this another recovery disc, I'll try that now, other then that, it seems that it would be a fixed format.

  Respectfully, that you try many different things absolutely without success. I encourage you strongly to create this live cd, following the instructions on the link in my previous post, recover your files, reformat, re-install and do with it.

  Any method allows you to retrieve your files get and do. You have re-installed windows 10 times since your first post and have been without headaches. It's just my recommendation of course.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Update of new Windows 7 installation problems

  Hello

  After windows 10 road test for a few months, I decided that it wasn't going to work for me. So I used my drive of windows 7 to do a new installation, after I formatted the hard drive. I installed the operating system successfully, but when I do the 200 some setting to update and to install as failure 8 and it asks me to restart, I do. After he completes the updates I login and then the screen is black except for the cursor that I can move around. I did that only connected things are a monitor, keyboard and mouse and Ethernet and always have the same question.

  I restarted in safe mode, and I am able to do throughout, on the desktop, no problem. So that being the case I thought I could do a system restore and updates from another chance. Well, I did this 3 times now with no luck. I even downloaded the diagnosis of WindowsUpdate tool and when I run it I get the error code "0 x 80070002.

  I honestly have no idea what to do and have not found help online.

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows 7 installation problem

  I'm trying to install Windows 7 from an expansion of Seagate 2 to and have used http://bootableusb.net/make-bootable-external-hdd-install-windows-78/ to format it to install Windows 7.

  However my my problem is that whenever I try to start the installer, it will not from 0 percent and cancelled with an error: "Windows Setup could not reset the deployment engine. To install windows, restart the installation.

  External not worth it, unless you want to run the installer to replace C.  But you will always have a cleaner installation by removing all partitions during installation that requires the stick bootable or disc.

  Follow own reinstall Windows 7

• Repair Windows 7 installation problem

  I want to try a repair installation on my computer running W7 Pro x 64 SP1 to see if it will solve a problem that I think is related to a problem with the OS.  I have a version of Windows and a valid product key, activated.   I have my original W7 install disk (it was actually an update of XP) as well as a separate drive that is the update SP1 of W7 (NOT an installation disc).

  Despite having valid keys, I am unable to download the image of recovery of Microsoft software, receiving a message that the language is wrong and that I should choose another language.  I went to tech support and they said it was because the product key was used 20 times - I only used it once, and it was obtained directly from MS during a support for the problem to upgrade installation.

  In any event after hours of troubleshooting including calls and conversations and an initial statement that my only recourse was to buy a new key technical support referred me to MS shop, telling me that they would give me a new key. After more chat, the MS store tech referred me to the reception of the answer; so, after hours of support not I dropped.

  With the resources I have, is it possible that I can build a drive that I can use to repair/installation, without having to download a picture of MS?

  Well, more hours on the phone with various divisions of MS support and FINALLY got someone who gave me a link where I could download an ISO of Win 7 Prof x 64 legitimate, installable to my system.  It took many more hours than I would have had to spend, this copy is legitimate, but, at least, I can now use this to do a repair/install of my dysfunctional W7 program.

• Python in Windows 7 installation problems

  Hello. I tried to install the Python on my laptop (Windows 7 Pro) language using the Installer MSI Windows x 86 3.2.2 Python from www.python.org. During the installation, I right click and install as an administrator. The command line works very well, but I am unable to get Idle GUI to load. He thinks about it for a few seconds while the blue circle icon appears, then nothing - not even an error message.

  I tried other versions of Python - e.g. ActivePython, with the same result. It does not seem to make a difference, what version of Python that I use. Any help gratefully received!

  Hello
   
  1. you use 32 bit OS or 64 bit one?
  2. What do you mean when you say "I am unable to get Idle GUI to load"? Are you talking about the GUI for the window or the window of the software installation when you try to run it?
   
  Python 2.6 (32-bit and 64-bit version) are compatible Windows 7. It is suggested to install Python 2.6. Please visit the following link for more information. Windows 7 Center compatibility:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Python&v=Python%20Software%20Foundation&UID=2&l=en&pf=0&PI=0&s=Python&OS=64-bit
   
   
  Method 1: Boot your system in clean boot mode, and then install python 3.2.2. Try now to the KB article to perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.
   
  Method 2: You may need to run the following troubleshooter to install and run Python 3.2.2.
  Open the program compatibility troubleshooting utility:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter
   
  It will be useful.

• Windows 7 installation problem - I can not load the disc of windows 7 for

  I can't get windows disk to load 7. I am trying to run the full version on top of XP.
  When I open my computer, always open the D drive then its empty. Any ideas?

  ETA, I try to install the 32 bit one

  I have an answer!

  At least, it worked for me tonight, and I pray it works out for others in this situation.

  I got exactly the same problem as you, except that I wanted to replace Vista with a clean install of Windows 7 on a computer of the 32-bit system IE.  But, like you, it just has not been grateful that there is a disc in there after that many 'click' would say tell me to insert a disc or that there was a disk failure.  I have since bought nine from a retailer, and was not very impressed and nor am I impressed by the response from Microsoft about this problem and must send them a letter expressing my displeasure.  Issues such as this must be properly studied and perhaps added to the 'specifications' of the software to warn buyers to potential problems of certain brands or models of PC.  In my opinion be told to get off the USB drive with a process that most of the audience would find almost impossible to understand and follow and with the many added costs of having to buy a portable hard drive, large enough DVD or USB drive is unacceptable, as far as Windows 7 is not an item to purchase low price as it is.

  In any case, this is what worked for me.

  I came to the conclusion that I wasn't going to lose more than £100 and so I have to use a laptop hard drive in order to make the suggested drive of USB and copy the disc on the laptop hard drive.

  I went into 'my computer', inserted the disc and he started his stupid clicking on and was not recognized, but in the list readers on the left side, I dragged all drive "E" (which is my DVD player and where the disc of Windows 7 was) on the USB hard drive.  This does not seem to have an effect, so I click with the right button on the E drive and press "copy" and "Paste" on the USB hard drive.  Now, I'm not sure if there is just a delay between the first process or if it was this process that has worked (as a result, please try both), but suddenly it seemed to 'wake up' the disc and it was recognized instantly and "run setup.exe" appeared in a pop-up and I could finally install Windows 7!  (Please Note - Although the disc began to copy it to the USB, I could have cancelled at any time so didn't need actually portable hard drive for this process - it just seems to 'wake up' when I tried to copy it somewhere else).

  I really hope it works for all those stuck with this problem and would like to hear if it has.

  Another point to note is that during installation, the computer will restart several times, and each time restarted mine, it got stuck on the screen black 'boot from CD' (due to the computer not recognize drive).  It was, fortunately, easy to solved for me to eject the disc and then close it again (leaving the disc, of course).  The rest of the installation was fine.

  Please, please post on here if the works above for one of you who have problems.  I sincerely hope that it is.

• Language of Windows 8 installation problem

  I've seen this before, but the answers never seem to work, let alone apply even to my

  version of windows. I had to take my computer be restored, and they choose to

  install the pack of English as the main language of the computer. I thought that this would not

  a question and as soon as I came back, I tried to install the language pack, but each time

  I am trying to download and install, part of it never ends.

  "The following updates were not installed:

  Language Japanese module - Windows 8 for x 64 systems - (KB2607607) [ja-JP_LP].

  There always seems to be something that prevents installation to complete entirely. I tried

  Anyway, install it via the computer restarts (which would say then do not unplug the computer,

  and would that part 5 of 84 is downloading, or something of the sort.) Each time, he would get to the

  end of the installation, it looks so there 'no' install, and saying that it restarts.

  I see there are son tell her because I let Windows updates be active, but I've never had

  This problem in the past before? Is there a way to manually download the update? I don't really want to 'restore' this computer again.

  Hello

  You might face this question when the components responsible for Windows updates to install is damaged. Please write us with the following details.

  Are you facing this problem with any other update?

  I suggest to follow the steps below and check if you help.

  Method 1: Run Windows Update convenience store.

  Open the link given below to run the troubleshooter, but it is valid for the edition Home Premium and Enterprise edition.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Check the question and move on to the next method.

  Method 2: Download and install the update to the clean boot.

  Download the language pack the link given below and try to install the clean boot.

  Language packs

  http://Windows.Microsoft.com/en-us/Windows/language-packs#lptabs=WIN8

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. 

    

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Please refer to the section: how to reset the computer to start normally after a boot minimum troubleshooting section of Kb to start the computer in normal startup after having solved the problem.

  Let us know the status of the issue. We will help you.

• Windows 98SE installation problem

  Hi all

  This is my first post here.

  I am installing Windows 98SE in VMware Workstation. For the VM I created, details are below.

  

  Every time when I start the installation program, it must first check the disc as usual in the installation of Windows 98, but after completing the disk check my host computer that is running Windows 8 64 -bit will be restart suddenly.

  I tried several times and same problem happening over and over again.

  I'm really frustrated now. Can someone help me on this.

  Thanks in advance.

  Hi greatgamblerand welcome to the VMware communities!

  You use Workstation version 9.0.0?  There is a flaw in this version which can cause an unexpected reboot of a host Windows 8 with a processor Ivy Bridge.  If this is your situation, update to version 9.0.1 or newer (I recommend the version 9.0.2) should solve the problem, as described in the VMware Workstation 9.0.1 Release Notes.

  Download site: Download VMware Workstation 9.0

  See you soon,.

  --

  Darius