CS6 - create a button using the photoshop image file

Similar Questions

• I have photoshop cs6 and want to use the patch tool, but I can't find it anywhere in my program. I tried to download the latest updates, but I'm still not. Fix function is supposed to be part of the package CS6?

  I have photoshop cs6 and want to use the patch tool, but I can't find it anywhere in my program. I tried to download the latest updates, but I'm still not. Fix function is supposed to be part of the package CS6?

  Hello Mojo,

  Please right-click on the Spot Healing Brush, and you should be able to see the patch tool.

  

  Kind regards

  Tanuj

• Error code #0xe0f00013, using the factory image restore

  Hello world

  I've had this laptop for about 8 months. The model is HP PAVILION DV6T-4000 NOTEBOOK of NOTES,

  I'm a software developer, so I need to install Linux on this machine using dual boot.

  I created the recovery disks before installing linux.

  Once I installed linux, windows 7 has stopped working and started asking for the disc of windows 7. Using recovery discs, couldn't find an option to restore the old installation of windows 7 (these options are disabled). Other options of formatting HD and restore out-of-factory State were available. In the end, I had to select restore factory image.

  When I boot the recovery dvd and do a system restore it support all 5 discs and the 6th disc when it is 83% and is "copy files needed to restore the hard disk" it throws below error:

  "Recovery Manager is unable to restore your computer by using the original image.  Please contact HP support.  "Error code: 0xe0f00013.

  I tried to restore it 3 - 4 times, each time that the result would be the same.

  I ran HD self-test, which doesn't show any problem with my HD recovery, I created discs are cool and have no scratches. I'm not sure what the cause of this problem.

  All this raises questions under:

  (1) what is the hexadecimal code "0xe0f00013?"

  (2) once we buy a "personal" NOTEBOOK, should we not be free to install any operating according to our need?

  3) why HP does not provide with a Windows disc, and why should we depend on recovery disks, or the recovery partition; These unreliable mechanisms?

  Earlier, I had a Dell laptop that provided me with all the windows and recovery disks.

  I bought HP recovery discs. lets see if provided HP recovery disks.

  If anyone has any other work around, please help.

  Thank you.

  Hello

  There may be a work-around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it comes to the retail version accurate, you would need.

  If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD.

  http://www.mydigitallife.info/Download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-link...

  Use the disk to perform the installation, enter the Windows activation key located on the underside of your laptop when asked and once installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need to find from here.

  Kind regards

  DP - K

  

• How to create a button like the one pictured here

  How to create a button in the button "print" below?

  

  I was actually thinking of doing it two separate buttons placed side by side. The "print" button, of course would be just updated the Boolean value, that is easy. But the drop down menu is a bit more difficult. I tell myself that I could customize a drop down, but because I was not able to play with it in LabVIEW (don't have it at home) I don't know if you can change the alignment of the drop-down box actually etc. The decline is down to the location of the box and look like something you can change in the control editor?

  I guess I could also use correct .net? But I'll try to keep it all with just control editing in LabVIEW if possible. Thank you.

  for (imstuck).

  I use a listbox multicolumn and toggle visibility is when the user clicks the button.  I've attached an example:

  

  ~ Simon

• Can I create a button that the copy is a certain test for my Clipboard?

  Can I create a button that the copy is a certain test for my Clipboard?

  For example, when I click the button on the site, then the next time to paste it somewhere, a specific text appears?

  If possible, could someone please explain to me how? =(

  Hi Travis,

  There is no native function to Muse to achieve this goal. However, you can use custom code to achieve this. Please see the following link for the code example: How to copy to the Clipboard in JavaScript?-stack overflow

  Kind regards

  Aish

• How to view the box in the button using the skin?

  Hello

  I'm putting the box inside the spark button using the skin. The button looks like in -.

  

  I want the button for the mouse event answers (which is some kind answer), but I also want to check too must respond to the mouse events when the mouse pointer is on the box.

  I am able to create a button that looks like in above. But when I move the mouse on the button, the button has changed and looks.

  

  As can be seen that there is no check box. I need to always appear on button box and should also be clickable.

  One have idea how solve it?

  Thank you

  Prithveesingh Zankat.
  

  
  

  <>Box includeIn = "mounted" left = "2" top = "2" bottom = "2" width = "16" red = "0".

  Right.Disabled = "10" horizontalCenter.disabled = "0" verticalCenter.disabled = "0" width.disabled = "18"

  Left.Down = "2" top.down = "2" bottom.down = "2" verticalCenter.down = "0" width.down = "18"

  left. class= "0" top.over = "2" down. class= red '2 '. courseis '0' width. class= "18".

  Left.up = "2" top.up = "2" bottom.up = "2" verticalCenter.up = "0" width.up = "18"

  />

  in the code above you were asked to include in the report only, you do not have to override the updatedisplaylist etc, if you don't need, you can remove the counting other elements such as the color of highlighting, strokes, borders etc., if you don't need. But don't forget to add your own background color when you remove everything else.

• Create a button on the front for the diagram

  Hello

  I am looking to create a button on the front for the diagram.

  Is this possible? If so, how?

  Thank you!

  
  

• Recovery Manager cannot restore computer using the original image

  Hello

  I'm working on a Pavilion P6000 desktop series (WW639AA).  Windows 7 (64 bit) does not load as it seems that his score is corrupt. I ordered a new restore disc (and additional floppy) HP to restore the hard disk.  I tested the hard drive and all past.  However, when I run the Recovery Manager and try to restore the computer, I get the following error:

  «Recovery Manager cannot restore you computer using the original image.»  Contact HP support.  ' Error #0xe0ef000e.

  All of the suggestions.

  Thank you.

  blewettjl,

  A disk that has been 'cleaned' will have this error with HP rated DVD.

  HP has a patch, called CyberLink Recovery disk utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en

• Impossible to scan: "another program or computer using the HP imaging device.

  Original title: hp scanning problem

  I can't seem to find anything on the hp site regarding my being not scan with the center of Solution because that 'another program or computer use the HP imaging device ".  I have my Officejet 6500 connected via an ethernet cable in my Linksys routeras is my internet modem.  Someone has an idea?  I can print fine; I can't scanner to work other than the program with the paint.  Thank you for coming so someone can help out me.  -Steve M

  Hello

  I suggest you to visit the following links: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Networked-C6280-and-Windows-7-64-bit/td-p/217282

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Windows-7-Professional-and-HP-printer-software/TD-p/224258

  I hope this information is useful.

• Why and how 'create a profile using the e-mail icon?

  When I try to send a screenshot of a web page, and after that I'm going to "email recipient" a small screen appears and tells me that "no profiles have been created.  To create a profile use the mail Control Panel icon.  What this means and how can I do?  I use outlook express and can not send another email, just not screenshots of web pages.  UPS used to before.  I recently "upgraded" in IE8.  Thank you!

  Check in Internet Options as your default mail Outlook Express Manager
  (The mail applet is to use with Outlook, part of the Office family and completely different from Outlook Express)

• How to create IT strategy using the BES administrator API

  Hi all

  Can tell me, how to create IT strategy using the BES administrator API.

  Please provide me with the code example.

  Thanks in advance.

  Kind regards

  Sampath

  Hi Sebastian,.

  The Administration of BlackBerry API does not support the creation of it political. This feature is currently with the development of control and review for a future version of the BlackBerry Web Services for the Administration of the company.

  Kind regards

• Get the 500 error trying to create a table using the REST API

  Hello

  I tried to create a table using the REST API for Business Intelligence Cloud, but I got 500 Internal Server Error for a while now.

  Here are the details that I use to create a table.

  

  and the json to create the schema that I use is

  [{'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ["ROWID"]}]

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['RELATIONID']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['ID']}

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['RESPONDEDDATE']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [255], 'columnName': ['RESPONSE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_CREATEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_CREATEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_LASTMODIFIEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_LASTMODIFIEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_SYSTEMMODSTAMP']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [10], 'columnName': ['SYS_ISDELETED']},

  [{'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [50], 'columnName': ['TYPE']}]

  I tried this using postman and code, but I always get the following response error:

  Error 500 - Internal server error

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.5.1 500 internal Server Error The server encountered an unexpected condition which prevented him from meeting the demand.

  I am able to 'get' existing table schemas, delete the tables, but I'm not able to make put them and post operations. Can someone help me to identify the problem, if there is no fault in my approach.

  Thank you

  Romaric

  I managed to create a table successfully using the API - the only thing I see in your JSON which is different from mine is that you have square brackets around your values JSON where I have not. Here is my CURL request and extract my JSON file (named createtable.txt in the same directory as my CURL executable):

  curl u [email protected]: password UPDATED h x ' X-ID-TENANT-NAME: tenantname ' h ' Content-Type: application/json '-binary data @createtable.txt https://businessintell-tenantname.analytics.us2.oraclecloud.com/dataload/v1/tables/TABLE_TO_CREATE k

  [

  {

  'columnName': 'ID',

  'dataType': 'DECIMAL ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': false

  },

  {

  'columnName': 'NAME',

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'STATUS."

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'CREATED_DATE."

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  'columnName': 'UPDATED_DATE ',.

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  }

  ]

• If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  Yes, you can access the project that you created after the trial is over, but you need to back it up.

  Concerning

  Stéphane

• Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!

  Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!

  No one can tell you anything without the proper system or other technical details info. The standard answer with all the problems of text is quite simply, you have a "bad policy" on your system and need to get rid of him.

  Mylenium

• I use Illustrator CS6 (Mac). I use the free transform tool. Why can I not use shift, Option, command to distort in perspective?

  I use Illustrator CS6 (Mac). I use the free transform tool. Why can I not use shift, Option, command to distort in perspective?

  Ah, hong.

  Then, drag Option and only use Cmd + shift.