CSA with the Client VPN and remote access
Hello world!
I have the folowing isue: I have to tune in to the CSA for a clinet it connects remote with VPN Client only. He should not be able to connect to any other network or lan or dial-up.
No idea what the policy should change or tune?
Thank you
You can create an access network rule that depends on a State of the system. The State of the system can be defined to have a game of skill, which belongs to the range of VPN and the network access rule would declare that the client computer cannot act as a server on UDP/TCP ports when the State of the system is ensured.
So, if the laptop is not connected to the VPN, it would not be able to act as a server for connections to all and will be locked out. You will need to create an exception for the IP address of the VPN server to your corporate offices and allow the CSA client opening these ports.
Tags: Cisco Security
Similar Questions
-
Problem with the Cisco VPN and Vista client
Hello
I have an easy VPN server configured on a c2811 and users use the Cisco VPN client. Lately, I have users running Windows Vista 64 bit and I need to know what is the correct version of the vpn client, I have to use and the compatibility problems with the server, I configured.
Thank you and best regards.
Cisco VPN Client doesn't have any version that is compatible with Vista 64 bit OS. The only customer that Cisco has released that supports the 64 bit OS's AnyConnect, but it is only supported on the CISCO ASA Appliance
-
HTTPS protocol between the client vpn and host of the internet through tunnel ipsec-parody
Hello
We have a cisco ASA 5505 and try to get the next job:
ip (192.168.75.5) - connected to the Cisco ASA 5505 VPN client
the customer gets a specific route for an internet address (79.143.218.35 255.255.255.255 192.168.75.1 192.168.75.5 100)
When I try to access the url of the client, I get a syn sent with netstat
When I try trace ASA package, I see the following:
1 FLOW-SEARCH ALLOW Not found no corresponding stream, creating a new stream
2 ROUTE SEARCH entry ALLOW in 0.0.0.0 0.0.0.0 outdoors
3 ACCESS-LIST Journal ALLOW Access-group outside_access_in in interface outside
outside_access_in list extended access permitted tcp everything any https eq
access-list outside_access_in note hyperion outside inside
4 IP-OPTIONS ALLOW 5 CP-PUNT ALLOW 6 VPN IPSec-tunnel-flow ALLOW 7 IP-OPTIONS ALLOW 8 VPN encrypt ALLOW outdoors upward upward outdoors upward upward drop (ipsec-parody) Parody of detected IPSEC When I try the reverse (i.e. from the internet host to vpn client), it seems to work:
1 FLOW-SEARCH ALLOW Not found no corresponding stream, creating a new stream
2 ROUTE SEARCH entry ALLOW in 192.168.75.5 255.255.255.255 outside
3 ACCESS-LIST Journal ALLOW Access-group outside_access_in in interface outside
outside_access_in of access allowed any ip an extended list
4 IP-OPTIONS ALLOW 5 VPN IPSec-tunnel-flow ALLOW 6 VPN encrypt ALLOW My question is why this phenomenon happens and how solve us this problem?
Thanks in advance, Sipke
our running-config:
: Saved
:
ASA Version 8.0 (4)
!
ciscoasa hostname
domain somedomain
activate the password - encrypted
passwd - encrypted
names of
name 10.10.1.0 Hyperion
name 164.140.159.x xxxx
name 192.168.72.25 xxxx
name 192.168.72.24 xxxx
name 192.168.72.196 xxxx
name 192.168.75.0 vpn clients
name 213.206.236.0 xxxx
name 143.47.160.0 xxxx
name 141.143.32.0 xxxx
name 141.143.0.0 xxxx
name 192.168.72.27 xxxx
name 10.1.11.0 xxxx
name 10.1.2.240 xxxx
name 10.1.1.0 xxxx
name 10.75.2.1 xxxx
name 10.75.2.23 xxxx
name 192.168.72.150 xxxx
name 192.168.33.0 xxxx
name 192.168.72.26 xxxx
name 192.168.72.5 xxxx
name 192.168.23.0 xxxx
name 192.168.34.0 xxxx
name 79.143.218.35 inethost
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.72.254 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP address 193.173.x.x 255.255.255.240
OSPF cost 10
!
interface Vlan3
Shutdown
nameif dmz
security-level 50
192.168.50.1 IP address 255.255.255.0
OSPF cost 10
!
interface Vlan23
nameif wireless
security-level 80
192.168.40.1 IP address 255.255.255.0
OSPF cost 10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
switchport access vlan 23
!
interface Ethernet0/7
!
passive FTP mode
clock timezone THATS 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
DNS lookup field inside
DNS server-group DefaultDNS
domain pearle.local
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
Remote Desktop Protocol Description
EQ port 3389 object
object-group service UDP - udp VC
range of object-port 60000 60039
object-group VC - TCP tcp service
60000 60009 object-port Beach
object-group service tcp Fortis
1501 1501 object-port Beach
Beach of port-object 1502-1502
Beach of port-object sqlnet sqlnet
1584 1584 object-port Beach
1592 1592 object-port Beach
object-group service tcp fortis
1592 1592 object-port Beach
Beach of port-object 1502-1502
1584 1584 object-port Beach
Beach of port-object sqlnet sqlnet
1501 1501 object-port Beach
1500 1500 object-port Beach
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.50.0 255.255.255.0
object-network 192.168.72.0 255.255.255.0
object-network 192.168.40.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.50.0 255.255.255.0
object-network 192.168.72.0 255.255.255.0
object-group network inside-networks
object-network 192.168.72.0 255.255.255.0
WingFTP_TCP tcp service object-group
Secure FTP description
port-object eq 989
port-object eq 990
DM_INLINE_TCP_1 tcp service object-group
port-object eq ftp
port-object eq ftp - data
Group object WingFTP_TCP
DM_INLINE_TCP_2 tcp service object-group
port-object eq ftp
port-object eq ftp - data
Group object WingFTP_TCP
the DM_INLINE_NETWORK_3 object-group network
object-network 192.168.72.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
the DM_INLINE_NETWORK_4 object-group network
object-network 192.168.72.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
object-group network Oracle
network-object OracleTwo 255.255.224.0
network-object OracleOne 255.255.240.0
network-object OracleThree 255.255.224.0
the DM_INLINE_NETWORK_5 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_6 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_7 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_8 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
EQ-3389 tcp service object
the DM_INLINE_NETWORK_9 object-group network
network-object OracleThree 255.255.0.0
network-object OracleTwo 255.255.224.0
network-object OracleOne 255.255.240.0
object-group service DM_INLINE_SERVICE_3
the purpose of the ip service
EQ-3389 tcp service object
Atera tcp service object-group
Atera Webbased monitoring description
8001 8001 object-port Beach
8002 8002 object-port Beach
8003 8003 object-port Beach
WingFTP_UDP udp service object-group
port-object eq 989
port-object eq 990
WingFTP tcp service object-group
Description range of ports for the transmission of data
object-port range 1024-1054
HTTPS_redirected tcp service object-group
Description redirect WingFTP Server
port-object eq 40200
Note to inside_access_in to access list ICMP test protocol inside outside
inside_access_in list extended access allow icmp 192.168.72.0 255.255.255.0 any
Note to inside_access_in to access list ICMP test protocol inside outside
access-list inside_access_in note HTTP inside outside
inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 any eq www
access-list inside_access_in note queries DNS inside to outside
inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 no matter what eq field
access-list inside_access_in note the HTTPS protocol inside and outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any https eq
Note to inside_access_in to access list ICMP test protocol inside outside
access-list inside_access_in note 7472 Epo-items inside outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq 7472
access-list inside_access_in note POP3 inside outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq pop3
inside_access_in list extended access permit udp host LifeSize-PE-HQ any object-group UDP - VC
inside_access_in list extended access permit tcp host LifeSize-PE-HQ all eq h323
access-list inside_access_in note video conference services
inside_access_in list extended access permit tcp host LifeSize-PE-HQ any object-group VC - TCP
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any
Note to inside_access_in to access list Fortis
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any object-group Fortis
access extensive list ip 192.168.40.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any eq www
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any https eq
inside_access_in allowed all Hyperion 255.255.255.0 ip extended access list
inside_access_in list extended access udp allowed any any eq isakmp
inside_access_in list extended access udp allowed any any eq ntp
inside_access_in list extended access udp allowed any any eq 4500
inside_access_in list of allowed ip extended access any Oracle object-group
inside_access_in list extended access udp allowed any any eq 10000
access-list inside_access_in note PPTP inside outside
inside_access_in list extended access permit tcp any any eq pptp
access-list inside_access_in note WILL inside outside
inside_access_in list extended access will permit a full
Note to inside_access_in to access the Infrastructure of the RIM BES server list
inside_access_in list extended access permit tcp host BESServer any eq 3101
inside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group
inside_access_in list extended access permit tcp any any HTTPS_redirected object-group
access extensive list ip Hyperion 255.255.255.0 inside_access_in 255.255.255.0 allow VPN_Pool_2
inside_access_in list extended access permit udp any host 86.109.255.177 eq 1194
access extensive list ip 192.168.72.0 inside_access_in allow 255.255.255.0 DM_INLINE_NETWORK_7 object-group
access extensive list ip VPN_Pool_2 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access deny ip any any inactive debug log
Note to outside_access_in to access list ICMP test protocol outside inside
outside_access_in list extended access permit icmp any one
access-list outside_access_in Note SMTP outside inside
outside_access_in list extended access permit tcp any any eq smtp
outside_access_in list extended access udp allowed any any eq ntp disable journal
access-list outside_access_in note 7472 EPO-items outside inside
outside_access_in list extended access permit tcp any any eq 7472
outside_access_in list extended access permit tcp any any object-group inactive RDP
outside_access_in list extended access permit tcp any any eq www
outside_access_in list extended access permit tcp any any HTTPS_redirected object-group
outside_access_in list extended access permitted tcp everything any https eq
access-list outside_access_in note hyperion outside inside
outside_access_in list extended access permitted tcp Hyperion 255.255.255.0 DM_INLINE_NETWORK_4 object-group
outside_access_in to access Hyperion 255.255.255.0 ip extended list object-group DM_INLINE_NETWORK_3 allow
outside_access_in list extended access permit tcp any host LifeSize-PE-HQ eq h323
outside_access_in list extended access permit tcp any host LifeSize-PE-HQ object-group VC - TCP
outside_access_in list extended access permit udp any host group-object-LifeSize-PE-HQ UDP - VC
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access udp allowed any any eq 4500
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list extended access udp allowed any any eq 10000
outside_access_in list extended access will permit a full
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_8 192.168.72.0 255.255.255.0 inactive
outside_access_in list extended access permit tcp any any Atera object-group
outside_access_in list extended access deny ip any any inactive debug log
outside_1_cryptomap list extended access allowed object-group Hyperion DM_INLINE_NETWORK_2 255.255.255.0 ip
outside_1_cryptomap to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow Hyperion 255.255.255.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 193.172.182.64 255.255.255.240
inside_nat0_outbound list of allowed ip extended access all 192.168.72.192 255.255.255.192
inside_nat0_outbound list of allowed ip extended access all 192.168.72.0 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 VPN_Pool_2 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_5 object-group
inside_nat0_outbound list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0
inside_nat0_outbound list of allowed ip extended access any Swabach 255.255.255.0
access-list 200 scope allow tcp all fortis of fortis host object-group
access extensive list ip VPN_Pool_2 outside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_9 object-group
outside_cryptomap_2 list extended access allowed object-group Hyperion DM_INLINE_NETWORK_1 255.255.255.0 ip
outside_cryptomap_2 to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0
Note Wireless_access_in of access list, select Hyperion / wifi access NAT rule.
Access extensive list ip 192.168.40.0 Wireless_access_in allow Hyperion inactive 255.255.255.0 255.255.255.0
Wireless_access_in list extended access deny ip 192.168.40.0 255.255.255.0 192.168.72.0 255.255.255.0
Comment by Wireless_access_in-list of the traffic Internet access
Access extensive list ip 192.168.40.0 Wireless_access_in allow 255.255.255.0 any
standard access list splittunnelclientvpn allow 192.168.72.0 255.255.255.0
splittunnelclientvpn list standard access allowed Hyperion 255.255.255.0
standard access list splittunnelclientvpn allow Pearleshare 255.255.255.0
splittunnelclientvpn list standard access allowed host 85.17.235.22
splittunnelclientvpn list standard access allowed OracleThree 255.255.224.0
standard access list splittunnelclientvpn allow 143.47.128.0 255.255.240.0
splittunnelclientvpn list standard access allowed host inethost
Standard access list SplittnlHyperion allow OracleThree 255.255.0.0
Standard access list SplittnlOOD allow OracleThree 255.255.0.0
Standard access list SplittnlOOD allow 143.47.128.0 255.255.240.0
access extensive list ip 192.168.72.0 outside_cryptomap allow 255.255.255.0 DM_INLINE_NETWORK_6 object-group
outside_cryptomap_1 list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0
outside_cryptomap_3 list of allowed ip extended access any Swabach 255.255.255.0
192.168.72.0 IP Access-list extended sheep 255.255.255.0 GrandVisionSoesterberg 255.255.255.0 allow
192.168.72.0 IP Access-list extended sheep 255.255.255.0 VPN_Pool_2 255.255.255.0 allow
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
MTU 1500 wireless
local pool VPN_DHCP 192.168.72.220 - 192.168.72.235 255.255.255.0 IP mask
mask 192.168.75.1 - 192.168.75.50 255.255.255.0 IP local pool VPN_Range_2
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 613.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (wireless) 1 192.168.40.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp smtp Mailsrv_Pearle_Europe netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ftp ftp netmask 255.255.255.255 Pearle-DC02
public static 990 Pearle-DC02 990 netmask 255.255.255.255 interface tcp (indoor, outdoor)
static (inside, outside) tcp 3389 3389 Mailsrv_Pearle_Europe netmask 255.255.255.255 interface
public static tcp (indoor, outdoor) interface www Pearle-DC02 www netmask 255.255.255.255
public static 40200 Pearle-DC02 40200 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static tcp (indoor, outdoor) interface https Exchange2010 https netmask 255.255.255.255
public static tcp (indoor, outdoor) interface h323 h323 LifeSize-PE-HQ netmask 255.255.255.255
public static 60000 60000 LifeSize-PE-HQ netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static (inside, outside) udp interface 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255
public static (inside, outside) udp interface 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255
public static (inside, outside) udp interface 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255
public static (inside, outside) udp interface 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255
public static (inside, outside) udp interface 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255
public static (inside, outside) udp interface 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255
public static (inside, outside) udp interface 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255
public static (inside, outside) udp interface 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255
public static (inside, outside) udp interface 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255
public static (inside, outside) udp interface 60010 LifeSize-PE-HQ 60010 netmask 255.255.255.255
public static (inside, outside) udp interface 60011 LifeSize-PE-HQ 60011 netmask 255.255.255.255
public static (inside, outside) udp interface 60012 LifeSize-PE-HQ 60012 netmask 255.255.255.255
public static (inside, outside) udp interface 60013 LifeSize-PE-HQ 60013 netmask 255.255.255.255
public static (inside, outside) udp interface 60014 LifeSize-PE-HQ 60014 netmask 255.255.255.255
public static (inside, outside) udp interface 60015 LifeSize-PE-HQ 60015 netmask 255.255.255.255
public static (inside, outside) udp interface 60016 LifeSize-PE-HQ 60016 netmask 255.255.255.255
public static (inside, outside) udp interface 60017 LifeSize-PE-HQ 60017 netmask 255.255.255.255
public static (inside, outside) udp interface 60018 LifeSize-PE-HQ 60018 netmask 255.255.255.255
public static (inside, outside) udp interface 60019 LifeSize-PE-HQ 60019 netmask 255.255.255.255
public static (inside, outside) udp interface 60020 LifeSize-PE-HQ 60020 netmask 255.255.255.255
public static (inside, outside) udp interface 60021 60021 LifeSize-PE-HQ netmask 255.255.255.255
public static (inside, outside) udp interface 60022 LifeSize-PE-HQ 60022 netmask 255.255.255.255
public static (inside, outside) udp interface 60023 LifeSize-PE-HQ 60023 netmask 255.255.255.255
public static (inside, outside) udp interface 60024 LifeSize-PE-HQ 60024 netmask 255.255.255.255
public static (inside, outside) udp interface 60025 LifeSize-PE-HQ 60025 netmask 255.255.255.255
public static (inside, outside) udp interface 60026 LifeSize-PE-HQ 60026 netmask 255.255.255.255
public static (inside, outside) udp interface 60027 LifeSize-PE-HQ 60027 netmask 255.255.255.255
public static (inside, outside) udp interface 60028 LifeSize-PE-HQ 60028 netmask 255.255.255.255
public static (inside, outside) udp interface 60029 LifeSize-PE-HQ 60029 netmask 255.255.255.255
public static (inside, outside) udp interface 60030 LifeSize-PE-HQ 60030 netmask 255.255.255.255
public static (inside, outside) udp interface 60031 LifeSize-PE-HQ 60031 netmask 255.255.255.255
public static (inside, outside) udp interface 60032 LifeSize-PE-HQ 60032 netmask 255.255.255.255
public static (inside, outside) udp interface 60033 LifeSize-PE-HQ 60033 netmask 255.255.255.255
public static (inside, outside) udp interface 60034 LifeSize-PE-HQ 60034 netmask 255.255.255.255
public static (inside, outside) udp interface 60035 LifeSize-PE-HQ 60035 netmask 255.255.255.255
public static (inside, outside) udp interface 60036 LifeSize-PE-HQ 60036 netmask 255.255.255.255
public static (inside, outside) udp interface 60037 LifeSize-PE-HQ 60037 netmask 255.255.255.255
public static (inside, outside) udp interface 60038 LifeSize-PE-HQ 60038 netmask 255.255.255.255
public static (inside, outside) udp interface 60039 LifeSize-PE-HQ 60039 netmask 255.255.255.255
public static (inside, outside) udp interface 60040 60040 LifeSize-PE-HQ netmask 255.255.255.255
public static Mailsrv_Pearle_Europe 7472 netmask 255.255.255.255 7472 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8001 8001 interface tcp (indoor, outdoor)
public static 8002 8002 LanSweep-XP netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8003 8003 interface tcp (indoor, outdoor)
static (inside, outside) 193.173.12.194 tcp https Pearle-DC02 https netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Access-group Wireless_access_in in wireless interface
Route outside 0.0.0.0 0.0.0.0 193.173.12.206 1
Route outside OracleThree 255.255.224.0 193.173.12.198 1
Route outside 143.47.128.0 255.255.240.0 193.173.12.198 1
Route inside 172.27.0.0 255.255.255.0 Pearle-DC02 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.40.0 255.255.255.0 Wireless
http 192.168.1.0 255.255.255.0 inside
http 192.168.72.0 255.255.255.0 inside
http GrandVisionSoesterberg 255.255.255.0 inside
SNMP-server host inside 192.168.33.29 survey community public version 2 c
location of Server SNMP Schiphol
contact Server SNMP SSmeekes
SNMP-Server Public community
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-aes-256 GRANDVISION esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map0 1 match address outside_cryptomap_1
outside_map0 card crypto 1jeu pfs
outside_map0 card crypto 1jeu peer 212.78.223.182
outside_map0 card crypto 1jeu transform-set ESP ESP-3DES-SHA-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-ESP ESP-3DES-MD5 MD5-DES-SHA ESP-DES-MD5
outside_map0 map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map0 1 set security-association life kilobytes 4608000
card crypto game 2 outside_map0 address outside_cryptomap_2
outside_map0 crypto map peer set 2 193.173.12.193
card crypto outside_map0 2 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5
life card crypto outside_map0 2 set security-association seconds 28800
card crypto outside_map0 2 set security-association life kilobytes 4608000
card crypto outside_map0 3 match address outside_1_cryptomap
outside_map0 card crypto 3 set pfs
outside_map0 card crypto 3 peers set 193.172.182.66
outside_map0 crypto map 3 the value transform-set ESP-3DES-SHA
life card crypto outside_map0 3 set security-association seconds 28800
card crypto outside_map0 3 set security-association life kilobytes 4608000
card crypto outside_map0 game 4 address outside_cryptomap
outside_map0 card crypto 4 peers set 213.56.81.58
outside_map0 4 set transform-set GRANDVISION crypto card
life card crypto outside_map0 4 set security-association seconds 28800
card crypto outside_map0 4 set security-association life kilobytes 4608000
card crypto outside_map0 5 match address outside_cryptomap_3
outside_map0 card crypto 5 set pfs
outside_map0 crypto card 5 peers set 86.109.255.177
outside_map0 card crypto 5 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5
life card crypto outside_map0 5 set security-association seconds 28800
card crypto outside_map0 5 set security-association life kilobytes 4608000
Crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
outside_map0 interface card crypto outside
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP enable dmz
crypto ISAKMP enable wireless
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.72.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.72.0 255.255.255.0 inside
SSH GrandVisionSoesterberg 255.255.255.0 inside
SSH 213.144.239.0 255.255.255.192 outside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd dns 194.151.228.18 is 10.10.1.100
dhcpd outside auto_config
!
dhcpd address 192.168.72.253 - 192.168.72.253 inside
!
dhcpd address dmz 192.168.50.10 - 192.168.50.50
dhcpd enable dmz
!
dhcpd address wireless 192.168.40.10 - 192.168.40.99
dhcpd dns 194.151.228.18 wireless interface
dhcpd activate wireless
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Group Policy "pearle_vpn_Hyp only" internal
attributes of Group Policy "pearle_vpn_Hyp only".
value of server WINS 192.168.72.25
value of server DNS 192.168.72.25
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SplittnlHyperion
Split-dns value pearle.local
internal pearle_vpn_OOD_only group policy
attributes of the strategy of group pearle_vpn_OOD_only
value of Split-tunnel-network-list SplittnlOOD
internal pearle_vpn group policy
attributes of the strategy of group pearle_vpn
value of server WINS 192.168.72.25
value of server DNS 192.168.72.25
Protocol-tunnel-VPN IPSec l2tp ipsec svc
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list splittunnelclientvpn
Pearle.local value by default-field
Split-dns value pearle.local
username anyone password encrypted password
username something conferred
VPN-group-policy pearle_vpn_OOD_only
type of remote access service
tunnel-group 193 type ipsec-l2l
tunnel-group 193 ipsec-attributes
pre-shared-key *.
tunnel-group 193.173.12.193 type ipsec-l2l
IPSec-attributes tunnel-group 193.173.12.193
pre-shared-key *.
NOCHECK Peer-id-validate
type tunnel-group pearle_vpn remote access
tunnel-group pearle_vpn General-attributes
address pool VPN_Range_2
Group Policy - by default-pearle_vpn
pearle_vpn group of tunnel ipsec-attributes
pre-shared-key *.
type tunnel-group Pearle_VPN_2 remote access
attributes global-tunnel-group Pearle_VPN_2
address pool VPN_Range_2
strategy-group-by default "pearle_vpn_Hyp only".
IPSec-attributes tunnel-group Pearle_VPN_2
pre-shared-key *.
tunnel-group 213.56.81.58 type ipsec-l2l
IPSec-attributes tunnel-group 213.56.81.58
pre-shared-key *.
tunnel-group 212.78.223.182 type ipsec-l2l
IPSec-attributes tunnel-group 212.78.223.182
pre-shared-key *.
tunnel-group 86.109.255.177 type ipsec-l2l
IPSec-attributes tunnel-group 86.109.255.177
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:7d4d9c7ca7c865d9e40f5d77ed1238eb
: end
ASDM image disk0: / asdm - 613.bin
ASDM BESServer 255.255.255.255 inside location
ASDM VPN_Pool_2 255.255.255.0 inside location
ASDM OracleTwo 255.255.224.0 inside location
ASDM OracleOne 255.255.240.0 inside location
ASDM OracleThree 255.255.224.0 inside location
ASDM location Exchange2010 255.255.255.255 inside
ASDM location Grandvision 255.255.255.0 inside
ASDM Grandvision2 255.255.255.240 inside location
ASDM Grandvision3 255.255.255.0 inside location
ASDM Grandvision4 255.255.255.255 inside location
ASDM GrandVision_PC 255.255.255.255 inside location
ASDM location LanSweep-XP 255.255.255.255 inside
ASDM GrandVisionSoesterberg 255.255.255.0 inside location
ASDM location Pearle-DC02 255.255.255.255 inside
ASDM location Pearle-WDS 255.255.255.255 inside
ASDM location Swabach 255.255.255.0 inside
ASDM GrandVisionSoesterberg2 255.255.255.0 inside location
don't allow no asdm history
Where is that host (inethost)? Inside of the ASA, or on the internet (on the outside)?
If it is outside, you must configure the NAT for the pool of vpn as you turn on the SAA.
NAT (outside) 1 192.168.75.0 255.255.255.0
-
Connection with the client VPN for RV110W problem
Hi guys: I just installed a RV110W router to my small business and I try to connect via VPN from home client. I was unable to do so, no matter what I try. Relevant information:
1. I can connect to the router via remote very well management, so I know that the router is accessible from the Net.
2. internal address of the router: 10.81.208.1
3. active PPTP. PPTP server IP address: 10.0.0.1
4 IP addresses for PPTP clients: 10.0.0.10 - 14
5. two VPN clients added - one with PPTP, with the QuickVPN Protocol Protocol. Both are enabled (and Yes, I triple checked passwords)
6 encryption MPPE and Netbios active.
7 IPSec, PPTP and L2TP all active gateways.
8 VPN client: 1.4.1.2
9. computer: laptop running Windows 7 family (64-bit), with the firewall Windows is activated.
10 home network: 192.168.2.196
It is causing to tear my hair out. What Miss me?
Shannon
Hi Shannon,
I am pleased to see that you're progress.
Shannon Rotz wrote:
I changed the RM port to 443. Unfortunately, now I can't connect to the router via browser, either by remote management or from the local network - I get the usual "page cannot be displayed". How do I get back into the router configuration GUI?
You should be able to reach the GUI by typing https://192.168.1.1(assuming that you have not changed the default IP address) normally once you replace http (port 80) with https (port 443) the internal router web server automatically will redirect you to the https page if you type http. Open your command prompt and try to do a ping of the IP address of the router to ensure that it still meets this address
With regards to the VPN client: Up until I changed the port, the same error message kept coming up, i.e. "Unable to establish connection" (or something like that), with a list of possible reasons why it couldn't connect. Now the message has changed - I'm getting "Server's certificate doesn't exist on your local computer". If I continue trying to connect, then it says "Activating Policy", followed by "Verifying Network", then "The remote gateway is not responding. Do you want to wait?" This is definitely progress, since I never got this far before.
You are a quarter inch offline. If you look at the log.txt in C:\Program Cisco Small Business\QuickVPN Client, in my view, you will see "Failed to ping router remote VPN! This means that your PC is blocking the ping to the router response. Usually, if you look at this point the status of Client VPN in the router (first of all need to remote management) you will see that your user status is "connected." If the router thinks that the connection is established, but the PC does not work. You might want to try another PC at this stage to verify that it is indeed a problem with your PC. This problem is usually caused by the 3rd party software antivirus/firewall blocking the ping response. Microsoft Security Essentials can do this as well, so if you turn it off. If you do not have another PC to test from, call Cisco Small Business Support and ask a technician, try to connect to the lab. You can find the number to call here
On an impulse, I tried setting up a Windows VPN connection, i.e. created a new VPN connection in Network and Sharing Center, using a PPTP client ID that I had created. That connection actually worked, except for one problem: I can't see the remote network. If I could solve that problem, I'll just tell the other clients to use a Windows connection rather than QuickVPN.
Good thought. If you do not see the remote devices, make sure that they do not block VPN connections. (Windows or third-party firewall, antivirus, antispyware) With a connection, PPTP or QuickVPN, you should be able to go to run, type the IP address of the device that you want to connect to (i.e. \\192.168.1.101 ) and see the list of shared folders. After the PPTP connection is established, try to ping the address LAN IP of the router. If it is successful, try to ping a LAN device such as a network printer or a PC. Again, PCs may block ping requests if they have a firewall running watch so for this.
Answer please if you have any questions.
-
Site to Site VPN and remote access on PIX 6.3 (3)
Hello
I have a vpn site-to site to remote access configured on the pix device. Everything works like a charm until I decide to perform authentication of the local client for remote vpn clients using the same card encryption from site to site. Thus, the tunnel from site to site is broken because that is trying to authenticate the local user.
Is it possible to use the authentication of the remote local user for vpn clients on PIX without breaking other tunnels that use the same cryptomap?
If the answer is to use separate crypro card so how can I assign the other encryption to use outside of the interface card, if only a single encryption card can be assigned to any given interface?
When you configure the isakmp key, use the command
ISAKMP KeyString keys by the peer-address [mask netmask] [No.-xauth] [No.-config-mode]
No.-xauth will tell the isakmp won't the isakmp xauth for L2L and non-config-mode does not distribute the ip address of the peer L2L.
Let us know if it works
-Vikas
-
Hello
I have 2 Cisco Pix (Pix1, Pix2) 515E (8.0.4). Between these devices exist VPN L2L, which are configured on the external interfaces. On Pix2 I configured remote access VPN on the external interface, too.
Is it possible to achieve LAN behind Pix1, by using remote access VPN on Pix2 then VPN L2L?
I don't want to set up remote access on Pix1.
Thank you very much.
Kind regards
Vladislav
NAT (outside) 1 140.40.30.0 255.255.255.0 (PAT for RA vpn to access the internet if you complete tunnel)
It is simply because I have configured tunnel RA as complete tunnel instead of split, nat (outside) 1 at the RA 140.40.30.0 pool have internet access through your firewall ASA_SITE_B and translate with global ID 1 who is your external interface of the firewall SA_SITE_B. This has nothing to do with what you are trying to accomplish, but I posted it because it was part of the very common scenario. There are some example PIX 6.3 cases where you will need split tunnel so that RA users have internet access not passing not through the encrypted tunnel code 6.0 does not feature of intra-interface support but 7.x above is of the code. Other examples are that some people configure split RA RA user tunnel will have access to their local resources in their homes as the printers network etc...
It is therefore, I need to translate 172.27.1.0/24 RA pool?
No there is no address translation in place in this scenario to work and you don't need to translate something too long, there is no of networks that overlap in one of the SITES u do not need to translate, this scenario is completely free sheep as you access lists free of nat in two firewalls for networks involved in communication in tunnels ASA_SITE_B.
Because I want to see IP addresses from PIX_SITE_A to 172.27.1.0/24, not 140.40.30.0/24. Is it possible to do it this way?
Im not clear on this issue, but if I think what it means, it's possible but you need to have political NATing but I think this will make complicated setup, I would say to make this as simple as possible.
Concerning
All helpful PLS rate valid if it helped
-
Create the new user and remote access
Hello, I create a new user from the admin panel. Now, I want to ask how my friend will have access to my nas also. He tries to connect from https://readycloud.netgear.com/ but it does not connect!
I want to create some users and they can have access to my files from ther House. How can I do?
I sin ready 102.
Thank you
Hi h_tsopelas,
Please check this articleReadyCLOUD.
I hope this helps!
Kind regards
BrianL
NETGEAR community -
Routing and remote access - on three subnetworked, two subnet unable to reach to the internet!
Hello
Good evening everyone.
I had a problem in Routing and remote access on windows 2003 server. This server is already configured as a file server, domain server, and application server. Also configured as a router (thanks to access routing & remote) to connect the three different networks with each other. If this server has three NICs installed and each separate NIC network cards represent.
three different networks are - 192.42.160.0/24, 192.42.161.0/24, 192.42.162.0/24
Three cards of the NETWORK adapter installed on the server as with the IP - next
NIC - 1 = 192.42.160.220, Sub - 255.255.255.0, gateway - No.
NIC - 2 = 192.42.161.220, Sub - 255.255.255.0, gateway - 192.161.220.112 (this ip address for internet access then 4 g router IP)
-3 = 192.42.162.220, NETWORK cards, Sub - 255.255.255.0, gateway - No.
Now the question is I can get Internet & (also scathing in router ip 192.42.161.112) one network i.e. - 192.42.161.0/24, BUT when I try to access the internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I can not access and in addition can not ping to internet router ip - 192.42.161.112...
So, how do I access the internet to another two network also?
I was already the configuration of static routing for all three network but I wasn't always successful. I don't really know what exactly static routing this should be done in access routing & remote area so that all three network can reach to the internet?
Here is the result of the current track...
D:\Documents and Settings\Administrateur > route print
IPv4 routing table
===========================================================================
List of the interface
0x1 ........................... MS TCP Loopback interface
0x2... 00 30 05 8f ad 5 c... Broadcom NetXtreme Gigabit Ethernet - Mi Teefer2
niport
0 x 3... 0E 00 c4 f8 a7 0c... Network Intel(r) PRO/1000 GT Desktop Adapter - Teefer2 M
iniport
0 x 4... 0E 00 0c a7 c5 85... Intel (r) PRO/1000 GT Desktop Adapter #2 - Teefer
2 miniport
===========================================================================
===========================================================================
Active routes:
Network Destination gateway metric Interface subnet mask
0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
Default gateway: 192.42.161.112
===========================================================================
Persistent routes:
NoneSorry if I'm not able to explain properly. Please let me know if you have to explain more about it...
Thank you all.
Mahesh
Hello Manu,
Please post this question in the forums TechNet for Windows Server 2003. They will be able to guide you further.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home
-
The Routing and remote access could not start, error 214500037 (0x80004005)
My windows server 2003 r2, failed to start the Routing and remote access services. And in the event an observer log, it has error code
Event ID: 7024, with service specific error 2147500037 (0x80004005)
I tried to reset tcp/ip and replace ias.mdb and dnary.mdb by a new, but it did not work.Thank you
Hi budhihartono,
Since you are facing problems with windows server 2003 r2, it would be better suited in the Technet Windows forum. Please post your question in the following TechNet Windows server forum to improve assistance:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
I can't access my library of music on my iPod Touch 5th generation with the latest OS. When I press the icon of the music, a screen with the Apple logo and the word 'Music' only, not my list of playlists, artists, or songs.
I myself have solved by doing a reset.
-
ASA 5510 VPN for remote access clients are asked to authenticate on box
Don't know what's the matter, but my remote access users are invited to join the ASA before connecting to the tunnel. How can I disable this? Config is attached. Thank you all -
For remote access connections, you can turn off the prompt xauth (user/pass) with the following:
Tunnel ipsec-attributes group
ISAKMP ikev1-user authentication no
-heather
-
I live in a rural area that does not have consistent internet access. questions: what I have to have internet access to work with the ambient light and photoshop or is the program downloaded on my computer while I did not need to be online?
That is, the work programme is located in my computer or is it online?
Thank you.
adobe (and perpetual license) subscription programs are installed on your computer. You need to be online for installation and activation, and then you must be online periodically thereafter.
with a monthly subscription, one time every 30 days is necessary to maintain your activation. for an annual subscription, all 91 days once is enough. These checks online to check your license status.
-
Information on the routing of traffic of the client VPN to PIX.
Hey all,.
I could follow the VPN Wizard included in the PDM and able to connect with the VPN Clients for the PIX. But I'm looking for more information about how the routing is done.
For example, my remote is 67.71.252.xxx and my inside is 192.168.1.xxx. But if I connect via VPN to PIX Client, all data is transferred through my VPN to PIX and then trying to get out to the Internet.
I'll settle for data goes 192.168.1.xxx for transit through the VPN. This configuration made via the PIX or is it the responsibility of the Client machine to set up rules of the road?
All links to the guides to installation, or technical notes would be great.
Thank you inadvance.
Paul
Hello
I think the key word you are looking for is "split tunneling". This can be validated on the PIX using the vpngroup split access_list tunnel GroupName command.
"Split tunneling allows a remote VPN client or encrypted simultaneous Easy VPN remote access device to the corporate network and Internet access. Using the vpngroup split-tunnel command, specify the access list name with which to associate the split tunneling of traffic. "
In this example configuration: http://www.cisco.com/warp/public/110/pix3000.html, note that the same access list is used to "nat 0" and split-mining:
access-list 101 permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0
(Inside) NAT 0-list of access 101
vpngroup vpn3000 split tunnel 101
Order reference:
Please let us know if this helped
Kind regards
Mustafa
-
AnyConnect 3.0 supports IPSec VPN for remote access?
Hello world
I've read about Cisco AnyConnect 3.0 issues that it supports IPSec VPN for remote access:
I downloaded and installed the Client AnyConnect Secure Mobility Client 3.0.0629, but I'm not able to get the IPSec VPN works. Also, it has no option to use the previous of Cisco IPSec VPN client PCF files.
Can someone point me in the right direction to get IPSec VPN AnyConnect 3.0 work?
Thank you in advance!
Hello
Takes AnyConnect support IPSEC from version 3.0, but only in combination with IKEv2.
There is no option to use a CPF file with it and the config should be pushed through a profile Anyconnect.
More information on this:
You should also change the ASA config so that it accepts negotiations IKE v2:
http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/vpn_ike.html#wp1144572
Kind regards
Nicolas
-
Client VPN and WinXP compatibility issue
I have the Cisco VPN client installed on my WinXP SP2 for VPN access occasionally to our or networks to do. Suddenly I lost the ability to ping or against opening a TCP/UDP on my PC in LAN connection last week. All communications initiated FROM my PC worked fine. I did a lot of experiments and found that the issue is a Cisco VPN Windows service. As soon as the service, everything is OK. Some updates of Windows came last week and I thing that some of them is not interoperable with the Cisco VPN client. The client is 4.8.01.0300.
Does anyone have the same experience or a solution without stopping the service manual?
Have you tried to disable the Stateful Firewall VPN Client in the menu Options too?
Maybe you are looking for
-
Problem with the installation of iOS 10
I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the
-
HP Envy 17 LOL32PA #ABG: AccelerometerSt.exe - (0xc000007b) error at startup
After that I upgraded my laptop Windows 10 of 8.1 to Windows at startup after a while, I would get an error message for the so-called AccelerometerSt.exe gives me error (0xc000007b). How can I get rid of him? After some googling, I found that it happ
-
Live stream 8 doesn't screen flip during a rotation
Hello It's been a while since my Stream 8 screen doesn't flip/turn not when the device is rotated. I tried to look for the solution in the settings menu, but it is not yet resolved. Are there any suggestions? Thanks in advance
-
HP 4315 all-in-One: application of the HP Solutions Center in point 8.1 of Windows
Windows 8.1 installed and reinstalled driver for HP 4315 All In One. The HP Solutions Center's application is not found and I can't locate it on the web. I followed the link to HP, but the solution Center wasn't there.
-
Blue screen: Plug and Play detected an error, probably due to a bad driver?
Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver? I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death a