Cubbies are going to win tonight...

Similar Questions

• If I'm going to Win 8 pro. I have to use the stupid face desktop phone or can't I actually run as if it were a real computer (like XP or Win7).

  If I'm going to Win 8 pro. I have to use the stupid face desktop phone or can't I actually run as if it were a real computer (like XP or Win7).

  There are many third-party programs that will probably do what you want:

  http://www.AddictiveTips.com/Windows-tips/best-Windows-8-start-screen-modifiers-start-menu-apps/

• What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• I have Outlook Express with 2 identities, but all emails are going to the 2nd identity. How to restore the original identity?

  A month ago I received an error message trying to download emails to my primary identity.

  "An unknown error has occurred. "Account: 'mail.optusnet.com.au', server: 'mail.optusnet.com.au', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133.
  However, all emails are going into my 2nd identity.
  How can I re - define these identities?

  A month ago I received an error message trying to download emails to my primary identity.

  "An unknown error has occurred. "Account: 'mail.optusnet.com.au', server: 'mail.optusnet.com.au', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133.

  However, all emails are going into my 2nd identity.

  How can I re - define these identities?

   
   
   
  1. The error message indicates a corrupt Inbox.
  2. Messages if even received any at least in the second ID, in tools | Accounts, you also have the first account ID listed. First fix the Inbox.
   
   
  Error number: 0x800C0133 = a corrupt Inbox.
   
  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
   
   
  To avoid this in the future:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

• After complaining to microsoft to lose my heart Chess.Freesell, Spider, and after that I going to win 10, my games on win 7 play in slow motion.

  Original title: win 7 games

  After complaining to microsoft to lose my heart Chess.Freesell, Spider, and after that I going to win 10, my games on win 7 play in slow motion. Microsoft would do that on purpose to make me use win 10?

  I found that the conime is a system process that comes with your Windows computer. It is used by Windows when in charge of Asian languages is enabled.  If you need active Asian language support I leave this point here.  However there is nothing wrong with turning it off (you can always reactivate later).

• People mistake app: we are going to have problems connecting to Facebook

  My Facebook is synchronized with the people app (using the Microsoft account), but now it only shows my friends list and unable to connect to the new Facebook or my profile (error: we are going to have problems connecting to Facebook). I checked all check the Live (https://profile.live.com/services/connect?sourceid=fb) profile and my network is complete connection.

  
  I tried to uninstall/reinstall the people app, run AppsDiagnostic, go to the Local account, delete/reissue Facebook account with my MS account, update the latest version of the app and sync App licenses on setting store updates, but nothing changes!

  That's happened? How can I solve this problem?

  Please help me!

  Hello

  Welcome to the Microsoft Community Forums.

  Looks like you got an error message "we are going to have problems connecting to Facebook" people app.

  Since you did all the steps, we will perform refresh on the computer to see if there is a problem with the settings of the application.

  Create installation media to perform the update:

  How to create an installation media for a PC refresh or reset

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  Perform Update and see if it helps.

  a: press the logo Windows + O to open the search box.

  b: now, type refresh your PC , and then press ENTER.

  c: Now click on Get Started under Refresh your PC without affecting your files.

  d: Now click on Next.

  Note: updating of Windows 8 will remove all third-party applications installed, and it resets all default Microsoft applications.

  Reference:

  How to restore, refresh or reset your PC

  http://Windows.Microsoft.com/is-is/Windows-8/restore-refresh-reset-PC

  Hope this information helps. Get back to us with the status so that we can help you.

• Mouse events are going "through" my JPanel in a JLayeredPane

  Hello
  
  I use the JLayeredPane to a JFrame to display a JPanel "above" normal display from my window. In this "popup" Panel, I have a few buttons - it works very well, but with a caveat:
  
  When I click on a button on my 'popup' Panel, but the Panel itself, mouse click events are going through this Panel the normal JPanel of my JFrame, maybe keys behind her. So, my JPanel Popup, which is on top of my normal JFrame/JPanel, consumes no capture/mouse events.
  
  Do you have any idea how to stop the mouse events through my popup window/panel behind Panel?
  
  
  Thanks a lot for your help!

  Add a listener for mouse (movement/wheel) in the Panel that does nothing. One annoying feature that mouse events are not passed at the top of the hierarchy so normally not consumed but its exactly what you want :).

• Pavilion 15-p206tx: going to win 8.1 drivers work if formatted for Win 7 64 bit?

  I'm really fed up of earn 8.1, I want to degrade to Win 7 64 bit ultimate. Can someone confirm me work C drive SwSetup drivers in Win 7 64 bit?

  You need not install W7.

  If you want to update the BIOS (which I don't recommend unless your laptop is having issues addressed by the BIOS update), and then update the BIOS by using the file on your laptop support page by using the operating system supported.

  It goes the same for firmware.  Firmware and BIOS updates are hardware specific and are not pilots (they are the binary code that can be compared to the brain and nervous system of the unit).  If a problem occurs during the update, or you apply them to the wrong material, you can start your laptop in the trash.

• IPF in nonpaged area blue screen Win 7 64

  To run Win 7 64 BSOD delivery bit and got with error message Page Fault in non paged area. Recommended that I try Safe Mode. Then turned PC on again, came back to a screen which recommended repair or Normal startup. I have authorized the default setting - repair. Win 7 attempted to restart, then BSOD again with the same message. Turned PC off again and this time chosed F8 during startup to access Safe Mode options. Has been presented on the screen to choose and I chose Safe Mode. Minimum drivers scroll towards the bottom of the screen and the PC begins to start, never to switch Mode without failure. New BSDO is displayed. I unplugged all the USB devices, Zune HD, external hard drive, etc leaving only mouse and keyboard.

  Tried again to go to Safe Mode and it comes back to the BSOD.

  If I choose to start Win7 normally, I see the Win7 splash screen as it will start upwards, then returns to the screen recommending to select repair or start normally. If I chose the repair, it goes back to the BSOD. If I chose Normal startup, it will come back to this screen. So it seems to be an endless loop and no way to get into Safe Mode.

  I have not tried a repair of the Win7 disk yet, because I don't know if there is something I should do first, like entering the CMD Mode if it will let me, etc and try different commands.

  I feel it's related material based on what I've read online from my work PC, but I need to raise Win7 so I can dig & run diagnostic tests. Last thing I did on Sunday has been add my new Zune HD in the Zune software client and that I could see, all updated very well. I used the Zune PC client software for my Zune 120 previously without problems.

  Any help would be appreciated so I can check 'how to' on work on the home PC.

  Thank you!

  Hi Wasipeer,

  Welcome to the Microsoft community.

  For better assistance, answer the following questions.

  1. What is the brand and model of your computer?

  2. do you get any error code or message?

  3 did you do any change in the computer?

  See the following Microsoft Help article and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Reference:

  Follow the link.

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559023 (v = vs. 85) .aspx

  I hope that this information will help you.

  Please reply with the status of the issue so that we can better help you.

  Thank you.

• Topics in RoboHelp 8 projects are going through

  I have several projects I have improved imported in RoboHelp 8.  Initially, when in each project, all topics are correct.  But after importing projects from second and the next, when I return to the first project, it shows the subjects of the latest project?  What is going on?  I tried searching to see if this has happened to others, but don't see anything other... Any help would be appreciated...

  Hi all

  It might help if we take a moment to understand a bit of the evolution of RoboHelp.

  Pull your chairs a little closer and I'll tell you a story. In the first years of RoboHelp projects are managed by the. File of the metatarsophalangeal joint. Because the MPJ file kept track of all aspects of the project, it was possible to store as many projects as you want in the same main folder. It was nice of the appearance of sharing content. You can configure things so that you have common subjects and images in several projects. If one of them has changed, you changed them in any project and they changed for all projects using them. Of course, this meant you had to recompile or re - build each project if they have changed, but the change actually was held only once.

  Now comes the long X 5 with a new file structure. XML format. This means changes. Unfortunately, some of the changes that effectively blew this way of working completely out of the water. You may wonder why. Well, that's because while each project is often unique, some of the underlying files are rather generically named. For example, you have the ProjectName.XPJ, which is specific to each project, but that reference XPJ generic files with the extensions of file APJ (Anaheim project). Files such as rhskins.apj, rjsnippet.apj and so on.

  My guess as to what happened here is that with a single instance of these files can be in one folder, the one who saved the last wins.

  What you see before you is the next task.

  1. You need to split the project into separate folders to make each project in its own folder.
  2. THEN you upgrade each project.

  You should probably start by restoring the backup that you did before you attempt the upgrade.

  You, uh, did, haven't you?

  Well done to all... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Satellite L355D - some drivers are missing for Win 64 bit

  I received this L355D in a trade for a unit of the computer.

  Supposedly, he had a virus on it and don't run so the previous owner wiped the drive and installed an operating system Linux on it before offering to me in a job and I didn't have the password for Linux and the owner previous couldn't be contacted, so I cleaned the disk and installed XP Professional 64 that I purchased and had installed on the Tower I exchanged (I kept the hard drive). XP Pro 64 only comes with SP2.

  I had the same problems with missing drivers.
  I have become aware that the original problem WAS NOT a virus as the previous owner thought due to its stop suddenly, the device was overheating due to an accumulation to high dust and other fuzz at the entrance to the fan.

  I downloaded the drivers from Toshiba which are provided for are the Vista 64 platform (I use XP 64-bit, as much, I hate Vista) some had to have a second attempt, but I managed to install almost all of them, and they work!

  This cured the wireless Altheros and it works well but is not the ethernet Altheros
  This cured the issue with Realtek ethernet and it works well and is now in use
  The Realtek multimedia works with all others.

  Also, I use MS Essentials for security (no particular reason) and if you decide to use, select Vista 64 as your operating system XP 64 is not supported and will not not install, but if you lie and say you're a Vista 64 will be, sometimes it don't dΘmarre so a simple 'restart' solves the problem.

  I have the same questions and don't know what to do to solve them without creating new ones.

  Not available ACPI\TOS1901\2 & DABA3FF & 0
  The drivers for this device are not installed.

  SM Bus controller
  PCI\VEN_1002 & DEV_4385 & SUBSYS_FF681179 & REV_14\3 & FB68 B1B & 0 & A0
  The drivers for this device are not installed.

  my functions of keys do not work...

  I'd appreciate any help to solve these problems. I like much this portable

  Hello

  Windows XP 64-bit drivers were never published by Toshiba.
  The 32-bit Windows has been used in the past and the 64-bit Windows versions are popular since Vista and Win 7.

  However, the ACPI\TOS1901 seems to be Uitility password or the supervisor password utility.
  Maybe the 32-bit version would work.

  The VEN_1002 & DEV_4385 SM bus controller appears to be from a controller from ATI
  I could find the VEN ID in database PCI
  http://www.PCIDatabase.com

  PS: What L355D-xxx you have exactly?

• I don't see local area network. Win 7, IE 10. How can I do so?

  I do not see local networks with my win 7-64 bit, that is to say 10.  How can I do so?

  Hi David,

  Please answer a few questions to refine the question.

  1. When you say LAN. you earn to the available network connections?

  2. are you using wired or Wi - Fi?

  3. are you able to access the network with other browsers?

  Try to run the network troubleshooter and see if that fixes the problem:

  Check out this link to do the same thing:

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Provide more information so that we can help you.

• Can I use vista drivers or are there drivers Win 7 available, you want to upgrad DV6-129TX for Win 7,.

  I have a Pavilion DV6129TX running Windows XP Pro. I intend to upgrade the disk to a 5400 RPM 100GB to a 7200 RPM 500 GB and also upgrade the operating system. I prefer Windows 7 32 bit but HP customer care advice was that there are no drivers to support hardware on this laptop to run win7. I have a copy of Vista spare laying around so I'm more than happy to use it as I know that Vista was an option on this laptop, but as I said, the 7 is my favorite option. Someone can tell me if I can switch to Win7 and use Vista drivers or are their drivers available to run Win7? I ran the Win7 Upgrade Advisor and the only program which, appears, will have problems is HP QuickPlay.

  Look in the templates section of level 3 in theWin 7 Upgrade Guide , you should be fine with Win 7 better than Vista.

  I've seen a few problems reported with hard disk of 500 GB on these older laptops. No problem with 320 GB.

• Anyone know where you are going to change credit card for your membership information

  where are you going to change credit card. I changed it for a few products, but no link to change other adobe products in my account

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

• CS3: Audio are going on track 4, 5, 6, etc..

  Hello

  I use Adobe Premiere Pro CS3 and when I bring in a video and place it in the timeline audio automatically goes to the audio track 4. And there are two titles as audio is at 4 and 5. I tried to manually put the audio up to track 1, 2 or 3 and it's just a habit. Everything is going well except that it's just very annoying, I can work around him and I have for a few weeks now, but I just finally had enough. H

  This was happening to anyone else? Have I accidentally changed some setting somewhere? How can I fix it?

  Thank you

  Nicholas

  By default, your sequence has three stereo tracks. You import probably mono tracks, that are automatically added after stereo tracks, so Channel 4, 5, etc. Mono can't go to a mono, stereo track only to a stereo and 5.1 only to a 5.1 track. Check the speaker icon on the left side of the audio track. It makes no difference, but you can remove stereo tracks if they are empty and so climb the mono tracks in Visual representation.