CUCM 8.5.1 with vmware ESXi 5 on UCS C250 M2 supported?

Hi all.

My name is Shin Jcob.

I'm Korean.

So I can't speak English.

But I have question and I want to know this information.

Now, my client use the CUCM 8.5.1 with vmware ESXi5 UCS C250 m2.

Unfortunately, it was to issue. T.T

Problem is error Vmware host.

Error message is I/O latency.

But I have my doubts C250 M2.

Because I tried to find the CUCM 8.5.1 with C250 not manage the text but I couldn't it.

Maybe if you know, then answer me.

Thank you very much for reading my poor English text.

Have you already reviewed the wiki of virtualization?

UC in a virtualized environment

http://docwiki.Cisco.com/wiki/Unified_Communications_in_a_Virtualized_Environment

This server does not show in the

Tested baselines (CRT)

http://docwiki.Cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29

HTH

Java

If it helps, please note

www.Cisco.com/go/pdihelpdesk

Tags: Cisco Support

Similar Questions

  • Hot migration is possible with VMWare ESXi 5.1.0 without an ESX server management

    Hot migration is possible with VMWare ESXi 5.1.0 without an ESX server management?
    I wonder for a future issue, a scenario where a system administrator must build a Win2008 + DC on local storage, server
    then, once the physical box is integrated into the class network, the physical box is connected to the classified SAN storage.
    Is it possible to hot - migrate the server Win2008 + CC local storage to SAN storage at this time, with only the
    free version of VMWare ESXi 5.1.0?

    Welcome to the community - I guess that you are looking to do this, while the virtual machine is currently running - this is not possible without a management server, also called vCenetr, but all is not lost because you would be able spend the VM local storage to the San with the VM posered using the client storage management features

  • VCenter Server with VMWare ESXi free 5 5

    Hi all

    Test the VCenter Server 5 Evaluation (60 day trial) to management all my 5 of VMWare ESXi (free license). It works with restrictions. These restrictions aren´t a problem for me. I need only to move (power off of virtual machines), clone, create templates for and organize my servers in a single interface VSphere Client. So, I would like to know what type of license of VCenter Server 5 woks if VMWare ESXi 5 free. Buy the VCenter Server 5 Standard?

    Another doubt is if VStorage works with VMWare ESXi free license I.

    Best regards

    Fabio Sobral

    Unfortunately the free ESXi hosts in vCenter management is not possible (except for the eval). The hosts of ESXi need a vCenter Server Agent license that is only available in editions 'paid' of ESXi.

    André

  • Anyone run a Terminal servers virtual with VMware ESXi 3.5 If Yes please share your experiences?

    Hello guys,.

    We are runnig Terminal Server with Windows Server 2003 Ent in a cluster environment (TS 7), we plan to go with VMware ESXi 3.5 to virtualize the TS. Does anyone have any kind of experiences that can help make a decision?

    Thank you.

    Keep an eye on the side esxtop ESX and see your % RDY meters in this output.  Don't forget, as underlined chamon, with high vSMP values do not match always the best performance.  Typical scenarios citrix/ts use 1-2 vCPU for more effective results.  If you bump up to a larger number of users, you also want to watch the overcommitt on your processors and vCPUs in the box.  Many users a lot of switching and use heavy context on the processors for the management of the OS and the user.  1-2 vCPU seems to be the sweet spot.  What kind of applications are underway within the environment?

    -KjB

    VMware vExpert

  • 2808 LAG for use with VMware ESXi and Linux collage

    I posted the month last about setting up my work with groups LAG http://en.community.dell.com/support-forums/network-switches/f/866/t/19537080.aspx servers (I'll effectively implementing implement this Saturday)

    I decided to buy a 2808 for my ESXi server get more aggregated connections to my staff iSCSI Linux server but now I'm worried I might have made a mistake to buy the 2808.

    After looking in the manual before I realized I could have been mistakenly assuming that the 2808 had STP and LACP, as I can't find LACP anywhere in the PDF file. I guess that the configuration of my Linux machine for 802.3ad is out (a hope to make mode 4), so now for the configuration of my house, I wonder (* 1 *) that I have to configure my VMware NIC team like and what mode of binding should I use on my Linux host? As for the section at the top (my working configuration) (* 2 *) I don't know what to do about the road other than the leave as 'route based on originating virtual port ID "? (This is how our other data centers are configured, but I'm waiting for my admin network as agglomerates ESXi hosts are configured with the channels of port on our cisco switches)

    For the House, I want to try to increase the bandwidth by using three NICs in each server, I was hoping that it works:
    VMware: Route of IP hash function?
    w/Linux: balance-alb?

    -VMware:
    Before you begin:

    -Linux:
    * Descriptions of bonding modes *.
    + Mode 0 balance-rr: Round-robin policy: transmit packets in the sequential order of the first available through the last high school. This mode provides load balancing and fault tolerance.

    + 1 active-backup mode: Active-backup policy: only one slave in the link is active. A different slave becomes active if and only if, the active slave fails. MAC address of the binding is visible from the outside on a single port (NIC) to avoid confusion between the switch. This mode provides fault tolerance. The first option affects the behavior of this mode.

    + 2 balance-xor mode: XOR policy: transmit based [(adresse MAC XOR avec destination MAC traiterait de source) modulo County slave]. This selects the slave even for each destination MAC address. This mode provides load balancing and fault tolerance.

    + 3 broadcast mode: broadcasting policy: transmits everything on all slave interfaces. This mode provides fault tolerance.

    + Mode 4 802.3ad: IEEE 802.3ad dynamic aggregation of links. Creates aggregation groups who share the same speed and duplex settings. Use all the slaves in the active aggregator according to the 802.3ad specification.

    -Prerequisite:
    -1.Ethtool support in the base drivers to retrieve the speed and duplex of each slave.
    -Switch 2.A which takes care of IEEE 802.3ad dynamic aggregation of links. Most of the switches will require some type of configuration to activate 802.3ad mode.

    + Mode 5 balance-tlb: Adaptive load balancing transmission: Channel link that doesn't require any special switch support. Outgoing traffic is distributed according to the intensity of the current (relative speed) on each slave. Inbound traffic is received by the current slave. If the receiving slave fails, another slave takes over the MAC address of the failed receiving slave.

    -Prerequisite:
    -1.Ethtool support in the base drivers to retrieve the speed of each slave.

    + 6 balance-alb mode: Adaptive load balancing: includes balance-tlb plus receive balancing (rlb) for IPV4 traffic and doesn't require any special switch support. Receive load balancing is achieved by ARP negotiation. Link driver intercepts the ARP replies sent by the local system on their way and replaces the hardware address of source with the unique hardware address of one of the slaves in the bond as different counterparts use different physical addresses for the server.

    The topic dell nearest you, I have found a useful was: http://en.community.dell.com/techcenter/networking/f/4454/t/19415629.aspx

    my previous post was more concerned with VLAN tagging and spanning tree issues, but now I see I should have feared groups LAG it as well.

    Any help would be appreciated, thanks in advance all :)

    -

    PS. http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/dell-powerconnect-2800-series-spec_sheet.pdf said that the 2800 series supports LACP, so if I'm worried about anything on my iSCSI side slap me please in the face, but I guess even in this case, I'm still not sure how to configure the ESXi host because it does not support LACP without vSphere and my original configuration is a free version , so I have no web vSphere management needed to make the LACP allow the change.

    Not sure if it is of no use: example configuration of EtherChannel / switches control protocol LACP (Link Aggregation) with ESXi/ESX and Cisco/HP (1004048), but that's where I was to base the choice on IP hash from.

    It must have the support of layer 3 to achieve IP hash, IP addressing is a 3-layer technology, so a 6200 series or higher or the soon to be released N3000 series.

  • Channel Port LACP with VMWare ESXi IP hash Message: % SW_MATM-4-MACFLAP_NOTIF: < MAC > host in the vlan 1 is flapping between port

    Hello

    Currently I have a VMWare ESXi host with 2 network including 6 cards (3 of each) ports are connected to a X 3750.  I configured LACP on the switch and the Port of vDS group road based on IP Hash (802.3ad), my looks of config as follows:-

    src-dst-ip port-channel load-balance

    Interface Port-channel15

    switchport trunk encapsulation dot1q

    switchport mode trunk

    !

    interface GigabitEthernet1/0/15

    switchport trunk encapsulation dot1q

    switchport mode trunk

    bandwidth share SRR-queue 10 70 25 5

    form of bandwidth SRR-queue 10 0 0 0

    priority queue

    MLS qos trust dscp

    spanning tree portfast

    channel-protocol lacp

    active in mode channel-group 15

    !

    interface GigabitEthernet1/0/16

    switchport trunk encapsulation dot1q

    switchport mode trunk

    bandwidth share SRR-queue 10 70 25 5

    form of bandwidth SRR-queue 10 0 0 0

    priority queue

    MLS qos trust dscp

    spanning tree portfast

    channel-protocol lacp

    active in mode channel-group 15

    !

    interface GigabitEthernet1/0/17

    switchport trunk encapsulation dot1q

    switchport mode trunk

    bandwidth share SRR-queue 10 70 25 5

    form of bandwidth SRR-queue 10 0 0 0

    priority queue

    MLS qos trust dscp

    spanning tree portfast

    channel-protocol lacp

    active in mode channel-group 15

    !

    interface GigabitEthernet1/0/18

    switchport trunk encapsulation dot1q

    switchport mode trunk

    bandwidth share SRR-queue 10 70 25 5

    form of bandwidth SRR-queue 10 0 0 0

    priority queue

    MLS qos trust dscp

    spanning tree portfast

    channel-protocol lacp

    active in mode channel-group 15

    !

    interface GigabitEthernet1/0/19

    switchport trunk encapsulation dot1q

    switchport mode trunk

    bandwidth share SRR-queue 10 70 25 5

    form of bandwidth SRR-queue 10 0 0 0

    priority queue

    MLS qos trust dscp

    spanning tree portfast

    channel-protocol lacp

    active in mode channel-group 15

    !

    interface GigabitEthernet1/0/20

    switchport trunk encapsulation dot1q

    switchport mode trunk

    bandwidth share SRR-queue 10 70 25 5

    form of bandwidth SRR-queue 10 0 0 0

    priority queue

    MLS qos trust dscp

    spanning tree portfast

    channel-protocol lacp

    active in mode channel-group 15

    Currently I see many MAC beat in the log of the switch.  From my understanding, I expect the MAC address out all ports, because that's what'd ESXi when you use 'route based on the hash of the IP.  I'm worried about the impact this might have on the CPU / switch.

    August 6, 09:42:05.700 TSB: % SW_MATM-4-MACFLAP_NOTIF: 0050.569e.0939 to host in the vlan 1 is flapping between port gi1/0/16 and article gi1/0/15

    August 6, 09:42:16.479 TSB: % SW_MATM-4-MACFLAP_NOTIF: 0050.569e.28e4 to host in the vlan 1 is flapping between port gi1/0/20 and 0/article gi1/17

    August 6, 09:42:18.719 TSB: % SW_MATM-4-MACFLAP_NOTIF: 0050.569e.7f6a to host in the vlan 1 is flapping between port gi1/0/19 and article gi1/0/20

    August 6, 09:42:20.766 TSB: % SW_MATM-4-MACFLAP_NOTIF: 0050.569e.0939 to host in the vlan 1 is flapping between port gi1/0/16 and article gi1/0/15

    Is it by design, if so can I disable the message?  If this isn't the case, please can you advise where I can check/change the configuration?

    Thank you

    Peter

    It is really gud who... .you mentioned your solution here.

    Can you please mark this question as answered, thatâ so it can help the other guys.

    Concerning

    Please rate if this can help.

  • HP Proliant Gen8 DL380e not charge controller B320i with VMWare ESXi 5.0 U3

    Hello community.

    Iam trying to install VMWare ESXi 5.0 U3 on a HP Proliant DL380e Gen8 server that has a B320i controller, I'm using support custom installation of HP, but yet when I select target the device doesn't show anything, I tried to raid 1+ 0 and raid 5, but I get No result.

    Ce is ISO which I download.

    https://my.VMware.com/Web/VMware/details?downloadGroup=HP-ESXi-5.0.0-U3-OCT2013 & ProductID = 229


    try Added to ISO customize the controller driver, but the ISO tells me that that driver already exists.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=MTX_0a122ebcbbac4c469ca9acd1ae


    In le BIOS J’ai activated the next option.

    http://h20564.www2.HP.com/hpsc/doc/public/imageServlet?docid=emr_na-c03907472-1/c03871500.jpg

    You can try the custom HP VMWare 5.5 ISO instead? Or do you need a reason 5.0 any?

    I'm running a Gen8 DL380e with 5.5 Update 1 without problems. 5.5 Update 2 has some problems about the new version of the hpvsa driver that gives massive drops in virtual machines to run.

    You have a BBU (battery backup) installed?

    It is also for the execution of the last PSP (Proliant ServicePack) to get the latest firmware and the BIOS before installing.

  • Clustering with VMware ESXi 4

    Hello

    Please can anyone provide me with step by step instructions on how to create a Quorum for use with Windows 2003 clustering on VMware ESXi 4.

    I need to know what I am doing on the server and how I then associate creating newly Quorum with the nodes.

    Thank you

    Andy

    Andy,

    You are welcome.

    Don't forget to set the thread to answer and consider to mark correct or helpful answers.

    André

  • Getting started with VMware ESXi

    Please forgive me, because I'm just getting started with virtualization in the data center (ESX and ESXi). I been using virtualization desktop and server (player and GSX Server and Workstation) for several years now and I'd like to see if ESXi would be a good choice for an amateur system in order to use a training platform.

    Are my limited infrastructure management tools, or are there third-party or community free equivalents that will make the most much (not necessarily all) Infrastructure functions for me getting started with ESXi? I can't afford the cost of a license of Infrastructure to learn just the platform and also have a few questions regarding the ESXi environment.

    ESXi abstract everything, or I can pass through some devices (for example, a map of Zaptel for VoIP Asterisk) to a guest operating system? That would be my only reason for the use of a Linux host and stick with VMware Server instead of going completely virtual.

    Any assistance to the start-up, as well as good resources for someone new data center virtualization (no virtualization in general) would be very appreciated. I tried to read some briefs VMware tech directly, and a part of the documentation can be downright confusing.

    Thanks in advance, and I look forward to the next meeting.

    ESX are equipped with a fully functioing 60 days trial license - ESXi when correctly entered, you will receive an unexpiring licenses to run ESXi - discover https://www.vmware.com/tryvmware/?p=esxi

  • Nexus 9396 VPC with VMware ESXi 5.5 switch Standard

    We have just upgraded our central office switch in a Nexus 9396, which is linked to double UCS 6248 FI and also individually to some Dell R710 with dual 10 GB Ethernet card. When it connects to these stand-alone servers with a VPC etherchannel, the IP address of management rises and falls and some hosts can speak while others do not. If I leave a disabled port, it works fine. However, as soon as the two are enabled, connectivity breaks down. These ESXi servers are on a standard license, so distributed switches are out of the question. I have activate eval license and installation a vDS using the LACP improved and that works fine, it just doesn't work as an etherchannel standard with a standard virtual switch. The connectivity of the 6248 works also without any problems running in LACP. Here is the configuration:

    SW01 Nexus:

     interface Ethernet1/5   description ESX vPC Member   switchport mode trunk   channel-group 202   no shutdown interface port-channel202   description ESX   switchport mode trunk   vpc 202 

    SW02 Nexus:

     interface Ethernet1/5   description ESX vPC Member   switchport mode trunk   channel-group 202   no shutdown interface port-channel202   description ESX   switchport mode trunk   vpc 202 

    Configuration of ESXi is a standard switch with "Route based on the IP hash" and the two active adapters. Am I missing something? This configuration is not supported? Any help/advice would be greatly appreciated.

    Thank you!

    What happens if you do not use Portchannel, only 2 10gig (1/5 on each switch)?

    I think that the on the ESX host using maps network HA and can use only a single link. Once an operation fails, it uses it.  I think, I remember because the same problem with ESX hosts a couple of years.

    You can test the redundancy with physical ports and Portchannels?

    HTH

  • Best practices for Exchange 2003 with VMWare ESXi 3.5 and iSCSI SAN

    Hello guys,.

    Here's the Q? We have 1 physical Exchange 2003, the HOST of 4 and 1 iSCSI SAN with LUN 3, 1 for data, 1 for VMWare and 1 for SQL, if we're going to virtualize it, I don't know where to put data Exchage and newspapers. I do not think that that is a good practice to put together the data but I do not have another SAN. So, what can I do?

    Thank you.

    We have 813 mailbox.

    I agree with cainics, start an average size and go from there.  I know it's a production mail server and you can not exactly 'play' with the settings because this requires time, but if you do the VM too big, you would have nothing left for other virtual machines.

    I would go 2 vCPU and at least 4 GB of RAM, maybe 8GB.  There must be parameters for the Exchange mailbox 813 and X users # to implement your environments in order to get an idea of the amount of RAM that will be... 4GB seems minimal to me, but 8 GB would probably be better like that.

  • Can I install the vmware tools on a HP Proliant 380 G5 with VMware ESXi 3.5 Installable U3 with HP management components?

    Hello, I have install ESXi 3.5 U3 on a Hp Proliant 380.

    I have created a virtual machine to Windows 2003, and when I want to install VMWARE TOOLS from Vmware Infrastructure Client, it does not install on the virtual machine vmware tools. Nor has received all messages from a Client Infrastructure and neither of the virtual machine.

    Why could this happen?

    Thanks in advance

    NO.

    The installation of vmware tools lies in an iso file, which is located on your host ESX itself and is mounted on the virtual machine when you click "install vmware tools".

    Weather or not your host has a cdrom drive is not serious, you can always add a virtual cdrom drive to your guests and use iso files, or the cdrom drive on the PC that you are using the VI client from.

    If you vm doesn't have a virtual cdrom drive, it can't mount the vmware tools iso, and you cannot install the vmware tools.

  • VMware esxi 4.1 compatibility with ASUS PIKE 2008 interface?

    Hello VM ware Folks,.

    Can you let me know if ASUS PIKE 2008 interface card is compatible with vmware esxi 4.1 since I intend to install vmware server.

    Appreciate your help.

    Thank you

    Srikanth.

    Hi Srikanth,

    PIKE is an exclusive feature of expansion for ASUS motherboards. These motherboards are found in the HCL, but it seems that ASUS has not put the PIKE in the process of certification as a discreet storage card. ASUS claims nor that it is supported on anything other than Windows and Linux operating systems.

    You just have to try it and see, really. I think he's probably going to work perfectly, but it probably is not an adapter of storage supported for VMware ESX or ESXi, if you are having problems.

  • Upgrade VMware ESXi 6.0 Update 2 VMware ESXi 6.0

    Hello I am running my PowerEdge T110 II with VMware ESXi 6.0 - Dell customized image. I see that from April 15, 2016 Dell just introduced VMware ESXi 6.0 Update 2 and I'd like to update my system.

    On the download page , I see there is an option to download and the ISO file. I wonder if this installation will completely be wipeout my existing VMware ESXi 6.0 - Dell custom and all the settings and I have to start all over again or update 2 ISO just 'modernize' my network?

    Hello

    You can use it to update without doing a new install. KB.VMware.com/.../Search.do; cmd = displayKC & externalId = 2109711 #Inter

  • VMWare ESXi 5.5 - VMotion & HA supported MDM physical or virtual

    Hello

    Hope someone can shed some light on the survey below:

    1. can you VMWare ESXI 5.5 HA and Vmotion supported with vmdk files located in front of multiple vmfs datastore 3/5? I have problems with VMotion or HA?

    2. can you VMWare ESXI 5.5 HA and Vmotion (not storage Vmotion) support with a VM scenario below:

    3 three nodes with iSCSI SAN storage

    VM1
    -Drive C-> vmfs Datastore1
    -Drive D-> RDM (is this support on a physical or virtual compatibility mode)

    VM2

    -Drive C-> vmfs Datastore 1

    -Drive D-> vmfs Datasore 2


    IV ' e seen these link below no mention if need pyshical or virtual mode
    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1005241
    https://pubs.VMware.com/vSphere-55/index.jsp?topic=%2Fcom.VMware.vSphere.storage.doc%2FGUID-D9B143D8-9F93-41D1-A32F-9FF4DE4CDF14.html

    3. can you multiple access by 5.5 ESXi host the same data store (located on a San) vmfs using the free version of ESXi 5.5?
    Can I use this in a production environment? I have seen some companies test this on a non-production environment. Technically, it works.

    Thank you
    Paul

    Welcome to the community-

    (1) as long as the DRS HA cluster hosts see data even warehouses there will be no problem

    (2) once more, also longer than the nose can see data warehouses including the LUNS as the RDM it home should be without issue.

    (3) Yes multiple instances of the free version of ESXi can access LUNS shared - Yes it can be used in a production environment, but remember you can not handle the free hypervisor with vCenter.

Maybe you are looking for

  • The reactivation of several disabled

    I lost my Skype number some time ago and he would like to return. I don't think that it is used by anyone. How would I go to do this?

  • Re: Satellite C660D - 10L - Map WLAN there?

    Hello We are looking for a laptop using as a computer ThinClient-IGEL. For this reason, ist ist important to know the type of the WIFI chip. Thanks for the information. Karl-H. Brandt

  • Bluetooth is not working properly on Tecra M9

    I have a problem, try to use my Bluetooth on Toshiba TecraLaptop of M9.When I go into the Panel "Bluetooth devices" does not appear on the list. The only reference to Bluetooth is "Bluetooth Com". If I double click on the Bluetooth in the Systray ico

  • Powerful on password on NW9440

    A few years back I swapped the motherboard on my NW9440 as a diagnostic step.  It turns out not to be the problem that I had then.  The old motherboard has been kept since then, and I have disabled BIOS passwords before withdrawing. Recently, the sys

  • Beginner LabVIEW - XY graph and audio files

    Hello I am very new to LabVIEW. I'm doing a program as follows: The LabVIEW VI to simulate two temperatures of entry. You can simulate each of them through a random number generator (be sure to keep the numbers in a temperature range of imaginary), o