Cumulative count
Hello
I'm controlling an engine step by step using pulses of (effectively) timed software to plant a probe against a flat surface, by varying its proximity. Voltage (for my setup) gradients are steeper near this flat surface, so I decided to experiment with the help of an exponential distribution (growth) of the pulses. Go from one pulse per increment (measuring station) near the surface of something like 30 pulses per increment of much more far where gradients are smaller.
I got the control itself work specifications (because it responds as ordered for the number of pulses sent) but I want to develop an easy way to track the total number of impulses, i.e. after 5 increments of say (pulses of 1, 2, 3, 4 and 5) on the 5th step I'll save 15 cumulative impulses. Maybe someone could provide a small example that shows how to do this.
Please note that this question does not refer to digital material / counting and I'm using labview v8.5.
Thank you.
Search LabVIEW help 'register shift. "
I recommend you watch the LabVIEW tutorials online
LabVIEW Introduction course - 3 hours
LabVIEW Introduction course - 6 hours
Tags: NI Software
Similar Questions
-
Running or Cumulative count based on multiple columns
Hello-
I created a table ZZCEL_CUST_TRIAL as follows:
CREATE TABLE 'RPT_MART '. "" ZZCEL_CUST_TRIAL ".
(
NUMBER OF "ORD_DAY_DW_ID."
NUMBER OF "DAYPART_DW_ID."
NUMBER OF "PRODUCT_DW_ID."
NUMBER OF "ACCOUNT."
KEY CONSTRAINT PRIMARY 'PK_CUST_TRIAL' ('ORD_DAY_DW_ID', 'DAYPART_DW_ID', 'PRODUCT_DW_ID')
)
The data of the table looks like this (sample data)
PRODUCT_DW_ID ORD_DAY_DW_ID DAYPART_DW_ID COUNTIES
5588 2 3316 6
5587 2 1323 3
5578 2 1323 3
5564 1 1323 8
5592 1 793 7
5580 1 3206 4
5592 1 1708 4
5589 2 3316 2
5566 1 1323 2
5603 3 3316 4
The column of numbers actually shows how many customers have bought this product in this range that day. Now, I want to get a (cumulative) current account of customers of each target and each product so basically the output will look like this:
Daypart_dw_id Product_dw_id RUNNING_COUNT
2 3316 8
3 3316 12
I'm trying to use this query to get the number of race, but the figures are not good...
SELECT DISTINCT CTR. DAYPART_DW_ID, CTR. PRODUCT_DW_ID
SUM (CTR. COUNTIES) (CTR ORDER. DAYPART_DW_ID, CTR. COUNTIES OF PRODUCT_DW_ID LINES BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING)
OF rpt_mart. ZZCEL_CUST_TRIAL CTR
That's what I have which is obviously not correct. How can I get a count of the number of CHARGES and target products. Thanks in advance for any help. Much appreciated!
DAYPART_DW_ID PRODUCT_DW_ID CHARGES 1 2 95765 1 2 223140 1 2 338856 1 52 399870 1 52 399894 1 52 400087 1 52 400234
Select
DAYPART_DW_
PRODUCT_DW_ID
sum (sum (counts)) on cumulative_sum (partition by order PRODUCT_DW_ID of DAYPART_DW_)
from the data
Group
PRODUCT_DW_ID, DAYPART_DW_
order by
PRODUCT_DW_ID, DAYPART_DW_
DAYPART_DW_ PRODUCT_DW_ID CUMULATIVE_SUM 1 793 7 1 1323 10 2 1323 16 1 1708 4 1 3206 4 2 3316 8 3 3316 12 -
Question about results Powercli vs what I see in Vcenter
Hi all
I use the following script below and have a question. When you look at the output say server has 7 days to CPU MAX it shows 30, 29, 27, 30, 31, 26, 30. When I look at
to Vcenter Server A for the last 7 days, I see spikes in CPU up to 70% almost everyday, why this would result in the results of the script for max CPU? I am
using level 1 in all areas save.Script is below.
Thank you
Greg
Server Connect-VIServer-name username-password password
$allvms = @)
$vms = get - Vm
$start = (get-Date). AddDays(-7)
$metrics = "cpu.usage.average", "mem.usage.average".
$stats = get-Stat-entity $vms - start $start - Stat $metrics
$stats | Group-object - property {$_.} Timestamp.Day}, {$_.} @entity.name} | %{
$vmstat = "" | Select VmName, day, MemMax, MemAvg, MemMin, CPUMax, CPUAvg, CPUMin
$vmstat. VmName = $_. Values [1]
$vmstat. Day = $_. Group [0]. Timestamp.Date
$cpu = $_. Group | where {$_.} MetricId - eq "cpu.usage.average"} | Measure-object-property value - average - Maximum - Minimum
$mem = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average - Maximum - Minimum
$vmstat. CPUMax = [int] $cpu. Maximum
$vmstat. CPUAvg = [int] $cpu. Average
$vmstat. CPUMin = [int] $cpu. Minimum
$vmstat. MemMax = [int] $mem. Maximum
$vmstat. MemAvg = [int] $mem. Average
$vmstat. MemMin = [int] $mem. Minimum
$allvms += $vmstat
}
$allvms |
Export-Csv "c:\scripts\cpuandram\VMs.csv" - noTypeInformation
It is indeed all the averages, but not the same measures.
This is where the role of aggregation comes into play.
A short explanation
- the ESXi gets all parameters (there are no historic levels to an ESXi host) in every 20 seconds.
- vpx agent transfers these values to the vCenter, which held the first aggregation.
- the intervals of 20 seconds (real time) are converted into 1 historical range that has an interval of 5 minutes by default.
- The aggregation process creates new value from the corresponding values of 15 x 20 seconds. So it's not all come from the average cumulative counter. Maximum values to calculate the new maximum HI1...
- The value of cpu.usage.average may not correspond with the value cpu.usage.maximum for the values of the historical range.
The predefined intervals are most likely defined like this, because they serve the major requirements of a planner with admin/capacity of vSphere.
But there may indeed be other needs you need more granular data further in time.
This can be done by changing the levels of statistics (but which cost storage vCenter DB), discharging to an external DB values, or by using a more specialized tool (for example VCOPS) to the performance monitoring/capacity planning.
-
How do I add a cumulative word count pages
Help, please
5 pages provides a built in function of statistics of Word, on the view menu.
It provides a number of words for the entire document, but will also provide the number of words for a piece of selected text.
No selected text, the number of "words" for this document is 6972 (shown at the bottom left of the document).
With all the text selected on the first page only, the number of Word passes at 1318 (as can be seen, I used very small words)
By clicking on the bar of the word count reveals additional information:
Unfortunately, the information displayed cannot be copied (except by taking a screenshot). You will need to make manual notes if you want to keep a record.
Kind regards
Barry
-
Accurate count all in iteration
Hello ladies and gentlemen;
So, I have the following problem.
I want to know exact iterations a while loop is executed. The main problem is that, this while loop, doesn't always work, and sometimes he climbs to the next step of the program and return it to the same while loop.
In the attached VI you can see a variable named Y, color RED is, in fact, this particular counting while loop. The thing is that, when he meets the condition and goes forward in the program, then it has a possibility to come back to this particular loop, but when she returned, I lose my iterations account and start again.
The program is simple, it is just random numbers and whether it meets the conditions of > or< then="" it="" chooses="" the="" next="" path.="" the="" leds="" are="" there="" to="" know="" in="" wich="" while-loop="" it="" is="" runing.="" i="" have="" changed="" the="" wait="" in="" the="" while-loop="" i="" would="" like="" to="" measure="" so="" it="" can="" repeat="" itseld="" a="" lot="" if="">
Thanks, if I explained too well, folds made me know.
Kind regards
IRAN.
Here's how I would modify your VI to simply add the cumulative account (and not the other changes I suggested). I also put in the table indicator in there, so you should have a history of counties Y individual. I've shortened expects it 50 ms and the threshold to 99 to save time.
Edit: I made another change: the logic in the second image of the flat sequence had many redundancies. The output is equal to the > comparison 50 at all tiems so I eliminated the extra code.
Lynn
-
line count (*) the amount and add it to the previous of the resulting column
Hello
I'm new to sql and I want to create an additional column which allows to calculate the value of a row in the column number with the rank of its predecessor on the column of the sum. This is the query. I tried to use CUMULATIVE, but it does not serve the purpose.
select to_char(register_date,'YYYY-MM') as "registered_in_month" ,count(*) as Total_count from CMSS.USERS_PROFILE a where a.pcms_db != '*' group by (to_char(register_date,'YYYY-MM')) order by to_char(register_date,'YYYY-MM')That's what I
registered_in_month TOTAL_COUNT-------------------------------------2005-01 12005-02 32005-04 82005-06 4But what I would like to show is less than
registered_in_month TOTAL_COUNT SUM----------------------------------------------2005-01 1 12005-02 3 42005-04 8 122005-06 4 16Hello
So all the ranks of the exit, you want a total cumulative up to and including this line. It's just that the analytical SUM function.
Here's one way:
SELECT TO_CHAR (TRUNC (hiredate, 'MONTH')
, 'fmMonth, YYYY ".
) AS registered_in_month
COUNT (*) AS total_count
, SUM (COUNT (*)) ON (ORDER OF TRUNC (hiredate, 'MONTH'))
AS total_so_far
FROM scott.emp
WHERE job! = "ANALYST."
GROUP OF TRUNC (hiredate, 'MONTH')
ORDER BY TRUNC (hiredate, 'MONTH')
;
I don't have a copy of your table, so I used scott.emp to illustrate.
I like the GROUP BY TRUNC (dt, 'MONTH') instead of GROUP BY TO_CHAR (dt,...) because it allows me to display in any format and always sort in chronological order.
For example, the output of the above query is:
REGISTERED_IN_M TOTAL_COUNT TOTAL_SO_FAR
--------------- ----------- ------------
December, 1980 1 1
February, 1981 2 3
April, 1981 1 4
May, 1981 1 5
June, 1981 1 6
September, 1981 2 8
November, 1981 1 9
December, 1981 1 10
January, 1982 1 11
May, 1987 1 12
Of course, YYYY-MM format works, too.
-
Cumulative total for each day - how to deal with nulls
I'm on 11.2.0.3. I want to write a query to calculate a running total of the incidents a day - this request will be used for an APEX line chart.
Sample table and data:create table sales ( id number primary key, time_of_sale date, item varchar2(20)); insert into sales values (1, to_date('02-JAN-2013','DD-MON-YYYY'), 'book'); insert into sales values (2, to_date('03-JAN-2013','DD-MON-YYYY'), 'candle'); insert into sales values (3, to_date('05-JAN-2013','DD-MON-YYYY'), 'bicycle'); insert into sales values (4, to_date('05-JAN-2013','DD-MON-YYYY'), 'football'); insert into sales values (5, to_date('07-JAN-2013','DD-MON-YYYY'), 'football'); insert into sales values (6, to_date('10-JAN-2013','DD-MON-YYYY'), 'elephant'); insert into sales values (7, to_date('10-JAN-2013','DD-MON-YYYY'), 'turtle'); insert into sales values (8, to_date('10-JAN-2013','DD-MON-YYYY'), 'book'); insert into sales values (9, to_date('10-JAN-2013','DD-MON-YYYY'), 'candle'); insert into sales values (10, to_date('10-JAN-2013','DD-MON-YYYY'), 'bicycle'); commit;For each of the days between 1 January and 10 Jan I want to get the total functioning of the number of sales.
So the output l would like is:
DAY ITEMS_PER_DAY
--------- -------------
1ST JANUARY 13 0
JANUARY 2, 13 1
JANUARY 3, 13 2
JANUARY 4, 13 2
5 JANUARY 13 4
JANUARY 6, 13 4
JANUARY 7, 13 5
JANUARY 8, 13 5
JANUARY 9, 13 5
10 JANUARY 13 10
So even if there is no sale on January 4, we show the total of the previous day.
If I can create a series of dates using the:
select trunc((to_date('01-JAN-2013','DD-MON-YYYY')-1) + rownum) day from dual connect by rownum <= 10And I can't the cumulative aid total:
select trunc(time_of_sale) as day, sum(count(*)) over (order by trunc(time_of_sale)) as items_per_day from sales group by trunc(time_of_sale)
Overall, it gives me:
SQL > select
2 a.day as the day,
3 b.items_per_day
4 of
5 (select trunc((to_date('01-JAN-2013','DD-MON-YYYY')-1) + rownum) as day
6 double
7 plug by rownum < = 10).
8 (select trunc (time_of_sale) day, sum (count (*)) (trunc (time_of_sale) order) as items_per_day
9 sales
10 group by trunc (time_of_sale)) b
11 where a.day = b.day [+] - replace by parentheses to avoid the formatting of the forum
12 order by a.day
13.
DAY ITEMS_PER_DAY
--------- -------------
1st January 13 null
JANUARY 2, 13 1
JANUARY 3, 13 2
Value null 4 January 13
5 JANUARY 13 4
Value null January 6, 13
JANUARY 7, 13 5
Value null January 8, 13
Value null January 9, 13
10 JANUARY 13 10
It's not exactly what I'm looking for. I played a bit with a lag, but had no success.
Any ideas?
Thank you
John
Hi, John,.
You want to do the SUM after the outer join, like this:
WITH days_wanted AS
(
SELECT TO_DATE (January 1, 2013 ', 'DD-MON-YYYY') + ROWNUM - 1 day YOU
OF the double
CONNECT BY ROWNUM<=>
)
SELECT d.day
SUM (COUNT (s.id)) OVER (ORDER BY d.day) AS items_to_date
OF days_wanted d
S sale LEFT OUTER JOIN ON TRUNC (s.time_of_sale) = d.day
GROUP BY d.day
ORDER BY d.day
;
Note that we must use COUNT (s.id) instead of COUNT (*) here, because, given that it is evaluated once the outer join, COUNT (*) would be taken into account less than $ 1 a day, because the outer join ensures there will be at least 1 row in the game for each row in days_wanted, whether or not it matches anything in sales.
It wouldn't work using the old join syntax, too, but I suggest to use the ANSI syntax, especially for outer joins. It reduces the amount and the complexity of the coding, and which allows to reduce the number of errors. (Also, it avoids the problem of the display of this site.)
-
Count the unused paragraph styles
I want to check InDesign documents my students to see if they have been neatly with their style sheets. I have a script that works partially (I think this would work in CS4, if you replace CS4 CS5).
The bit that does not try to save the styles within groups. I commented in the script to display the error section. I get the error:
"Invalid value for the set property" applied paragraph style". "Planned to string, the style section or anything, but will put \"body text (body). " "number 30477
I tried to put the name of the style and the group, because that's how it works if you do it manually, IE body text (body). But it does not work.
Any help would be appreciated.
property myTypeReport: ' " - makes available anywhere.
" game of myTypeReport to '" - prevents report becomes cumulative when running several times.
Tell application "Adobe InDesign CS5"
the value myDocument to rating 1
game of unusedStyles to "'
game of myFoundItems to "'
game myDescription to "unused paragraph styles"
the value myParagraphStyleGroups for each paragraph style group of myDocument
the value myParagraphStyles for each paragraph style of myDocument
Repeat with I have a 3 in (County of myParagraphStyles)
define myStyle to the the point i of myParagraphStyles name
the value find text preferences for Nothing
the value text preferences to change anything
the value applied paragraph style to find text preferences to myStyle
tell myDocument
the value myFoundItems to find text
if (account myFoundItems) = 0 then the value unusedStyles to (unusedStyles + 1).
end say
end Repeat
-This is the section of the error
Repeat with x 1 to the number of myParagraphStyleGroups
set myGroup to the of the point x of myParagraphStyleGroups name
the value myParagraphStyles for this entire paragraph styles to paragraph style group myGroup of myDocument
Repeat with I have from 1 to (count of myParagraphStyles)
game of myStyle to (name of point i of myParagraphStyles) & "(" & myGroup & "") " string "
-Returns the myStyle
the value find text preferences for Nothing
the value text preferences to change anything
the value applied paragraph style to find text preferences to myStyle
tell myDocument
the value myFoundItems to find text
if (account myFoundItems) = 0 then the value unusedStyles to (unusedStyles + 1).
end say
end Repeat
end Repeat
-finish the section error
"myReport game to "(" & unusedStyles & "")" " & "\t\t" & myDescription
if (County unusedStyles) > 0 then the value myTypeReport to myTypeReport & myReport and return
return myTypeReport
end sayCan you make best use of all styles of paragraph in your document instead of styles of paragraph of the document, which should access the independent styles of groups? You would have to give on the name using as reference (probably a good thing anyway) and use the style itself (in your find/replace).
-
Hello
I have a question about the analytical functions. What I'm trying to achieve is: calculate the cumulative number of separate.
For example, to 20091001 I need to count the distinct subscribers on this date. I have need to also consider 20091001 to 20091002. 20091003 I must consider 20091001 to 20091002. You got the point.
Below, I have attached the input data and also my goal. I tried some of the windowing functions with no luck.
With 10 gr 2 Enterprise edition
Thank you
Onur
DATA:
daily_calendar_id subsriber_id
20091001 1
20091001 3
4 20091001
20091001 3
4 20091001
5 20091001
20091001 6
20091001 2
4 20091001
20091001 1
20091001 1
20091001 3
20091002 7
20091002 8
20091002 3
20091002 2
20091002-1
20091002 5
20091002 12
10 20091003
12 20091003
4 20091003
6 20091003
4 20091003
3 20091003
4 20091003
17 20091003
16 20091003
20091004 17
20091004 18
20091004 19
20091004 20
20091004-1
20091004 2
20091004 21
EXPECTED RESULT:
daily_calendar_id Cumulative_distinct_subscriber_count
20091001 6
20091002 9
12 20091003
20091004 16
Published by: user6299691 on December 10, 2009 05:04with t as ( select 20091001 dt, 1 val from dual union all select 20091001, 3 from dual union all select 20091001, 4 from dual union all select 20091001, 3 from dual union all select 20091001, 4 from dual union all select 20091001, 5 from dual union all select 20091001, 6 from dual union all select 20091001, 2 from dual union all select 20091001, 4 from dual union all select 20091001, 1 from dual union all select 20091001, 1 from dual union all select 20091001, 3 from dual union all select 20091002, 7 from dual union all select 20091002, 8 from dual union all select 20091002, 3 from dual union all select 20091002, 2 from dual union all select 20091002, 1 from dual union all select 20091002, 5 from dual union all select 20091002, 12 from dual union all select 20091003, 10 from dual union all select 20091003, 12 from dual union all select 20091003, 4 from dual union all select 20091003, 6 from dual union all select 20091003, 4 from dual union all select 20091003, 3 from dual union all select 20091003, 4 from dual union all select 20091003, 17 from dual union all select 20091003, 16 from dual union all select 20091004, 17 from dual union all select 20091004, 18 from dual union all select 20091004, 19 from dual union all select 20091004, 20 from dual union all select 20091004, 1 from dual union all select 20091004, 2 from dual union all select 20091004, 21 from dual ) select dt, sum(cnt) over(order by dt) cnt from ( select dt, count(*) cnt from (select min(dt) dt from t group by val) group by dt) -
Retrieving dates from counties...
I am on the following platform:
Windows Server 2003
Oracle 10.2.0.4
Sample data:
Requirements:WITH items AS ( SELECT 1 AS ID, 'OPEN' AS STATUS, TO_DATE('01/15/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 2 AS ID, 'OPEN' AS STATUS, TO_DATE('01/16/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 3 AS ID, 'CLOSED' AS STATUS, TO_DATE('01/17/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 4 AS ID, 'CLOSED' AS STATUS, TO_DATE('01/22/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 5 AS ID, 'OPEN' AS STATUS, TO_DATE('01/23/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 6 AS ID, 'OPEN' AS STATUS, TO_DATE('01/27/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 11 AS ID, 'OPEN' AS STATUS, TO_DATE('01/28/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 11 AS ID, 'CLOSED' AS STATUS, TO_DATE('01/29/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 1 AS ID, 'CLOSED' AS STATUS, TO_DATE('02/03/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 2 AS ID, 'CLOSED' AS STATUS, TO_DATE('02/07/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 7 AS ID, 'OPEN' AS STATUS, TO_DATE('02/11/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 8 AS ID, 'OPEN' AS STATUS, TO_DATE('02/15/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 5 AS ID, 'CLOSED' AS STATUS, TO_DATE('03/24/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 6 AS ID, 'CLOSED' AS STATUS, TO_DATE('03/25/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 9 AS ID, 'OPEN' AS STATUS, TO_DATE('03/29/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL UNION ALL SELECT 10 AS ID, 'OPEN' AS STATUS, TO_DATE('03/30/2009','MM/DD/YYYY') AS TRANS_DATE FROM DUAL )
I want to meet the following, if possible in a single query:
1. I need to count the number of items whose STATUS is open in a given month this may be satisfied by the query below:
2. I need to count the number of items that are 'CURRENTLY' in the State OPEN at the beginning of each month.SELECT INITCAP(TO_CHAR(TRANS_DATE,'MONTH YYYY')) AS "Month/Year" , count(*) AS OPENED_IN_MONTH FROM ITEMS WHERE STATUS='OPEN' GROUP BY INITCAP(TO_CHAR(TRANS_DATE,'MONTH YYYY')) ORDER BY TO_DATE(INITCAP(TO_CHAR(TRANS_DATE,'MONTH YYYY')),'MONTH YYYY') Month/Year OPENED_IN_MONTH -------------- --------------- January 2009 5 February 2009 2 March 2009 2
3. I need to count the number of items that are 'CURRENTLY' in the State FARM at the beginning of each month.
The result expected for conditions 2 and 3 is:
The final outcome for all requirements would be:Month/Year OPEN_AT_START CLOSED_AT_START -------------- ------------- --------------- January 2009 0 0 February 2009 4 3
If anyone has any other questions please let me know. Thank you!Month/Year OPEN_AT_START CLOSED_AT_START OPENED_IN_MONTH -------------- ------------- --------------- --------------- January 2009 0 0 5 February 2009 4 3 2 March 2009 4 5 2Hello
Thanks for posting the sample data and results so well!
Try this:
WITH got_deopened AS ( SELECT status , TRUNC (trans_date, 'MM') AS mnth , CASE WHEN status = 'CLOSED' AND LAG (status) OVER ( PARTITION BY id ORDER BY trans_date ) = 'OPEN' THEN 1 ELSE 0 END AS deopened FROM items -- WHERE ... -- any filtering you do goes here ) , by_month AS ( SELECT mnth , COUNT (CASE WHEN status = 'OPEN' THEN 1 END) AS open_cnt , COUNT (CASE WHEN status = 'CLOSED' THEN 1 END) AS closed_cnt , SUM (deopened) AS deopened_sum FROM got_deopened GROUP BY mnth ) SELECT TO_CHAR (mnth, 'Month YYYY') AS month_year , NVL ( SUM (open_cnt - deopened_sum) OVER ( ORDER BY mnth ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING ) , 0 ) AS open_at_start , NVL ( SUM (closed_cnt) OVER ( ORDER BY mnth ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING ) , 0 ) AS closed_at_start , open_cnt AS opened_in_month FROM by_month ORDER BY mnth;I'm also confused that Salim is in regards to what you want, but I made an assumption.
You seem to allow ID that have never been OPENED to CLOSED (for example, id = 3, which was 'CLOSED' on 17 January). It seems you want events like this one to count number closed_at_start of the month, but not to the imputed on the total cumulative open_at_start. I derived the deopened for that column.
The query above Gets the results you want with one exception.
It gets open_at_start = 4 (not 6) in the line of March. If this wasn't a typo, then explain what open_at_start is really, and how you calculate the numbers you want in three rows. -
Hello
Anyone know how I can reach a cumulative number?
For example, I have the select statement:
Select deptno from scott.emp
20
30
30
40
20
10
what I get is the following:
DEPTNO County
20 1
30 2
30 2
40 3
20 3
4 of 10
I'm playing my mind with analithycal functions, but without result so far.
Have a tip?
Thank you in advance!
Published by: user817006 on January 23, 2009 06:15user817006 wrote:
No, he should count on all ranks, how many separate departments are to this day. Like this:Well you shouldn't change your needs when someone is already working on it. ; P
SQL> ed Wrote file afiedt.buf 1 select deptno, sum(rn) over (partition by 1 order by empno) cnt 2 from ( 3 select empno, deptno, decode(row_number() over (partition by deptno order by empno),1,1,0) rn 4 from emp 5 ) 6* order by empno SQL> / DEPTNO CNT ---------- ---------- 20 1 30 2 30 2 20 2 30 2 30 2 10 3 20 3 10 3 30 3 20 3 30 3 20 3 10 3 14 rows selected. SQL> -
I recently bought a new macbook pro 13 inch (my first macbook never) and decided to read a little about the life of the battery.
To my surprise, I realize that my cycle was 7!
(Note: I only bought the macbook for about 4 days and charged for 3 - 4 times)
And according to the sites, cycle counts only account all costs 100% (fresh short accumulation).
In addition, my battery life estimated at 05:10 hours at 92%, but jumped to 08:40 hours to 84%.
Should I be worried?
I read that you can actually leave your macbook to charge overnight, but do you do with the power supply on or off?
What is the best way to charge your macbook?
If you are not satisfied with this experience, please return it and get another.
You can return a Mac within 14 days of the purchase.
For more information:
-
in fact, I want to install windows os (not authentic) because I'm fond of counter strike
so, mac support this game?
or it takes 8 GB ram to play counter strike?
operating system windows (not authentic) will cause no effect on mac?
If I install the windows on mac operating system, I will award 58 GB in the windows operating system and remains to mac, goes no problem in the future, due to the windows operating system?
ALSO POINT OUT THE ADVANTAGES AND DISADVANTAGES OF INSTALLING WINDOWS ON A MAC.
operating system Windows (not authentic)
This means that you ask for assistance on the use of a pirate copy of Windows?
If you install Windows, you have the advantage of being able to run Windows and the inconvenience of having to deal with all the viruses and stuff for which Windows systems are prone.
Why not just buy the Mac version? It seems relatively inexpensive: http://store.steampowered.com/app/730/
-
iCloud says it is complete, but it is count files that do not exist
Hello world.
I have a problem with iCloud reports that it is full, but when it calculates the space that I used, it's counting the things that have been deleted and removed from all appliances (including bins/albums "recently deleted").
I was testing my iPad battery life, because I want to do a shoot and I wanted to see how long I could record for. On both devices, I made a video of 10 GB and a 20 GB video.
As soon as I finished filming, I deleted the videos. Also, I went into the album "recently deleted" and removed them.
A few days later, however, I got a warning: my 50 GB of storage iCloud was completely full, and had ceased to backups.
I looked at my MacBook Photos app, and of course, the videos have been synchronized and downloaded, despite me to delete and remove the "recently deleted".
I deleted the videos from my MacBook photo library and once again removed from the tray.
My photo library real iCloud should take 19 GB. However, when I looked at the Finder to "Library.photoslibrary Photos", it took 49.5 Go. I dug into the library, and despite videos being removed from the MacBook photo library, the actual files themselves were still sitting here in my library.
In addition, iCloud had ceased to sync my actions regarding these two files, so deleting a device has not removed the from all devices. I had to go through this same process on my Mac Mini, my iPhone etc.
But on all my devices, if I go to "storage utilization & iCloud", he always tells me that my photo library iCloud is 49.5 gb and my storage is full.
These files do not exist on any device. They are not visible when I go on iCloud.com - they are nowhere.
What can I do? Still, the synchronization does not reliable (a few photo editing are not synchronized between devices now and some destruction of photo are not replicated between devices - obviously, 'something' is a little messed up because of these two files).
My only option will be to disable and remove my iCloud photo library and wait 30 days?
If anyone can give me any help, I would appreciate it.
The iPads are: Mini 2 and Pro, originally in iOS9.3.5 and now on 10.0.1; Macs are: retina 2014 of the MacBook Pro and Mac Mini end of 2012, both on OS X 10.11.6. I've done different things, like turning off iCloud photo library on all devices, deleted photos, emptied bins, rebooted devices, switch things on.
Thank you all
What happens when you turn on the backup/disable under settings > iCloud?
-
How many time you listen to a song to count as "played" (= 1 flow)?
How many time you listen to a song to count as "played" (= 1 flow)? I know it is 30 seconds for Spotify, is it different for music from Apple?
Thank you
Leo
Until the end of the song.
Maybe you are looking for
-
Logic Pro 9 unexpected leave after updating Mac OS Sierra
Here's a new update of Mac OS installed and new problems with Logic Pro (9). While working, I can't open any save / open / export popup - no matter what, this finder calls - logical popup just closes in a second. Never have met this funny on thank yo
-
Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this
-
I have Vista's Window, already have Flash Player and Java installed, can anyone help me with this problem?
-
bug Simulator Beta 2 auto scale?
Hello My application properly on Simulator version 1 layout. I just install the new version of the Simulator and the same application is not put on the page properly. I discovered that my LabelButton seems too close to the right edge and the version
-
iSCSI - two subnets on a vswitch iscsi ports link
HelloIs less than supported scenario about binding ports for the software iSCSI (ESXi 6.x)?Two in two different subnets (2 controllers) iSCSI storage devices: 192.168.10.x and 192.168.20.x (mask 255.255.255.0).ESXi host with a vSwitch iSCSI.Four exch