Currency not recognized USB.

Windows XP Service pack 3

I get the message "Motto USB not recognized."

I have a GPS of Holux GPSslim236 receiver. It works well with connection bluetooth on one of my computers, but with my work computer which doesn't have a blutooth connection but I have a data cable, windows will not recognize it can I somehow force Windows to recognize it by providing the GPS coordinates.

Thanks in advance

Well, you don't want to uninstall the controllers, instead, R.click USB

on them (one at a time), select "(mise à jour de logiciels ou pilotes), achieve internet,"

do it for all, close when thru.

Also, try to go to the web site of mfg MB (intel, amd, etc.), download the chipset installation utility.

or the update to the youre MB chipset. This includes software drivers for USB

Tags: Windows

Similar Questions

  • My usb ports are not recognized usb storage damage

    Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

    My usb ports are not recognized usb storage damage

    Hello

    · Do you think any yellow exclamation point inDevice Manager under USB devices?

    Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

    Method 1:

    Tips for solving problems of USB devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Method 2: Remove and reinstall USB controllers

    a. Click Start; in the start search type devmgmt.msc and press ENTER.

    b. expand Bus USB controllers.

    c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    d. restart the computer, and then Windows will reinstall the USB controllers.

    e. plug the removable USB storage device and test to make sure that

  • Portege R700-17Z bios not recognizing USB devices

    Hello

    I'm after some advice on a problem I'm having with my R700, I can't get the laptop to recognize USB hard drives start-up stage. I am trying to use Acronis to create an image that I have 40 of these laptops.

    The CD-ROM USB CD drive is recognized and is therefore a Corsair USB pen (which is unfortunately not large enough), but I have three hard drives USB (a Freecom Tough Drive, Buffalo MiniStation and Western Digital passport) and none of them are recognized by the BIOS. Legacy USB emulation is enabled.

    Am I missing something?

    Thank you, Karen

    Hello

    The BIOS does not support * USB HDD * as a boot device. Any reader USB CD/DVD or USB stick is bootable USB devices.

  • Equium A60 - Generic not recognized USB Hub

    Equium A60, XP Home Edition SP3.

    My Tevion USB 2.0 combo card reader is reported as being a USB device fails, is not recognized and implemented in the device as an unknown device manager.

    Here's the riddle:
    When I plug it into the same old PC under XP Pro SP3, it is recognized and works.
    When I plug it into a new PC running Vista Home Premium, it is recognized and works

    And finally, and especially:
    When I plug a USB 1 Hub 4 ports on the A60 Equium and then plug the Tevion USB2.0 card reader this Tevion card is recognized and works. There are a lot of bleating like a lost sheep on the run faster if connected to a USB 2 port, but if I plug it directly into the port from Toshiba it does not at all.

    Any ideas to solve this problem or similar experiences?

    Wizzer

    Is the gap of 4-port hub powered by the USB port of your satellite or is it a KVM?

    If self-powered it s then it s obviously needs a lot of power combo card reader which can be provided by all of your computers, but not the satellite.

    It is a theory that might make sense... :)

    Welcome them

  • Nighthawk R8500, USB 3.0 Flash drive not recognized USB 3.0 Port, Port of only 2.0

    My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.

    At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.

    Thanks in advance for any help, Carlos

    Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos

  • Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

    Does anyone have a solution to our problem?

    USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

    Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

    We had a 'ready' indication/led the 6251.

    We tried several things... (all do not work)

    1. we have installed DAQmx 9.3 (for Windows 7)

    2. clean MAX Database by the following

    http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

    Michael B.

    Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

    Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

    How does the monitor devices OR running in the interface of the status bar to the device loader service?

    I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

  • Toshiba laptop A105-S1013 msg device not recognized USB.

    will not recognize usb keys.

    right now, I don't have connection capabilities as I am waiting for AT & T to connect with DSL.

    tried to connect to a wireless Belkin device but the USB does not recognize the he or the Belkin drivers on another device.

    find WiFi driver update on the Toshiba site. will try and install from a cd that this update talks of G which seems to me the minimum required here in our mobile Park that requires WiFi.

    Also will try to connect to the library or McDonald's today.

    Is there a way re install the software for the USB that comes with the CD of the OS? I also searched on Toshiba, but there is no update for the USB driver.

    Last January, I re installed Windows XP on this laptop and at that time there all worked as it should. Now, we're back in the Park and the laptop was not for months and it all started with the USB recognizing one of my memory sticks.

    Thank you.

    Larry

    Hi Larry,

    Follow these methods.

    Method 1: Follow the steps in the article.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    Method 2: Update the chipset drivers.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

  • Device not recognized USB message with iPhone 3g

    Here's the story from the beginning, I hope that I have provide sufficient detail.

    I got my iPhone 3 G is replaced. Therefore, a new phone... I went on iTunes in the middle of the restoration... It gave an error message and put my phone in recovery mode. Since my computer gives me the message "USB DEVICE NOT RECOGNIZED" and appears as an "unknown device" in Bus USB controller in Device Manager.

    I went to apple and they finished the restoration... I plugged the phone on other computers... It is therefore not the phone.

    Still nothing pops up... It keeps giving me "USB DEVICE NOT RECOGNIZED" I have uninstalled iTunes the right way... as Apple people walking through and reinstalled... the Apple Mobile Device is started.

    I still get nothing... everything is... newly installed... Windows doesn't recognize just... that it doesn't show up as a camera... and it does not even charge my phone.

    I tried different ports... and I get the same message... my camera and my sisters iPod shuffle connect correctly.

    I really need help! I don't know what else to do... I need to work on this computer. It's a Toshiba Satellite Windows Xp SP3

    I just went through two weeks of tampering with my 'old' computer trying to recognize my new 4370dn Canon multifunction printer after installing Windows 7.  I tried to reinstall Windows XP, uninstall the USB ports and hubs in Device Manager, update the printer drivers and several combinations of these elements.  In my case the ports would recognize external hard drives and flash drives, but my printer would come as a device not recognized.  Finally, what worked for me was to uninstall all the ports/USB hubs listed in Device Manager (they get automatically reinstalled with a soft reboot of the computer) again, download a driver from the Intel website (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/16023/a08/infinst_autol.exe&agr=&ProductID=&DwnldId=16023&strOSs=&OSFullName=&lang=eng) chipset installation utility and restart the computer.  When I plugged the USB cable from the printer, the normal process of new device was launched.
  • When I plug my USB in Iget the message not recognized usb device

    I have a storage device removable I store my files in. Yesterday after saving my work, I closed my laptop and removable storage in as well as my mouse to the left. I came back after several hours and tried to open a file that was on removable storage, but it was not listed. In others, I go to my computer and select the removable disk f for example, but he wasn't there. So I unplugged it and donated to the is when I got the message saying: USB device not recognized one of the usb devices has malfunctioned and windowes dose not recognize it. So I put in my laptop to marry and got the same answer. I have no problem with the wireless mouse.

    Hello

    Once removed the HDD data can't be recovered. However, you can use your favorite search engine to browse third-party data recovery software and use this software to recover data.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    You can also view the following link to recover lost or deleted files and try the steps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

    Hope this information is useful.

  • Device not recognized USB error message - all USB ports.

    Apologies if all this seems a bit simple, but I'm not an expert, so bear with me.

    I have a laptop Fujitsu Siemens Amilo Li 1718.

    My USB ports have stopped working in 2-3 weeks.  I get the message "USB device not recognized.  One of the devices attached to this computer has malfunctioned and Windows does not recognize... »

    I don't seem to get any yellow exclamation point in device, all my drivers in Device Manager and software are up to date and Windows Update is running.

    My mobile phone and ipod always charge when I plug them in and out of this problem, everything works fine.

    In addition to the usual updates of Windows, only two other things have occurred since last, they worked.  One was that I renewed my subscription to Norton Antivirus, the other was that my laptop battery ran right out while he was in mode 'sleep' as I did not know that I had not plugged to the socket properly.

    So far, I went through some process as suggested by various items and/or help & support on Microsoft.com.  They include:

    * (From multiple locations) system restore has failed.
    * Diagnostic software Ran Fujitsu Siemens, which says that my computer is fine.
    * Run the virus scan who come clean.
    * Tries to connect via a USB hub.
    * Deletied the USB controllers in Device Manager to re - install.
    * Changing the settings of ForceHcResetOnResume 3-to-1
    * Change AdditionalCriticalWorkerThreads from 0 to 2

    (The last two I've changed back again after neither worked).

    My opinion of beginner, it's that looks like it will create new registry details for each device when valid seem to exist already is not thankful.  Although given my lack of technical knowledge, this could well be stating the obvious.

    So, now, I drew a blank.  Anyone got any ideas?  Got 9 months left a 3-year warranty, I don't want to go through the hassle if it can be avoided without too much trouble.

    Thanks in advance!

    Tim

    Hello

    Maybe these will help.

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Have you tried to use an external hub powered by USB power is very limited in a computer and if overloaded
    strange problems will come up.

    ------------------------------------------

    Even if you did some of this departure please up and work until low and if necessary check
    with the utility.

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
    USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
    Try to remove all instances and restart then plug the drive.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Device not recognized USB - mouse

    Hi - write a new thread that I raised in a previous which I suppose is not sought at the most. Mods - delete please if you always looked at the other thread.

    I started intermittently gel experience with my old USB mouse, so I replaced it, that to have my new mouse (Canyon CNR-MSL7) begin to experience the same problems. Intermittent at first, but it became unusable over time - error "USB device not recognized". I tried two mice in another PC and they work fine. I use Vista is said by the way.

    I had a hard disk separated on my laptop (Sony VAIO VGN-AR71S) failure so I sent away for repair. I advised the hardware failure Sony and my USB mouse problems - she is back with a new HD but they said they found no defects with the USB.
    the mouse worked for about 1 day before I started getting the error 'USB device not recognized' again.

    A system restore will obviously work for me because my hard drive has been replaced and I have the same problem I had before, despite the installation of the more updated version of vista to Sony.

    The laptop has the most until drivers date etc, but does still not more than 95% of the time. I went through different threads here and I checked that everything is fine with the USB etc hubs, but not joy.

    I checked the ports are feeding correctly and that they are.

    I tried power down, stop and remove the advice of battery given here that seems to have worked so well for people but it does not work for me unfortunately.

    Is someone of MS can advise if it is sought in order to create a solution that works for those of us who does not work for the option "disconnect"? I tried all the solutions to this problem listed on the various threads on this subject in this area and other forums. Or can someone tell me if there is anything I can buy to remove the problem? Equipment etc? I thought that an upgrade to windows 7 could help, but I've seen a lot of discussion here that clearly show the same problem that appears for people who use it.

    Another new mouse like the ticket to me if you have hardware problems (and this is
    my best bet).

    Rob - bicycle - Mark Twain said it is good.

  • HP PRINTER P2035 NOT RECOGNIZED USB.

    I BOUGHT THE NEW PRINTER HP P2035 LASER PRINTER AND NOT ABLE TO INSTALL IN WINDOWS 7. I USE THE ORIGINAL CD TO INSTALL IT BUT WHEN THE TIME TO CONNECT USB, I CONNECT BUT NOT RECOGNIZED AT ALL. I CHANGED THE USB PORTS BUT SAME PROBLEM. ALL USB PORTS ARE WORKING OTHER DEVICES WORK IN ALL THE USB PORTS ON MY DESKTOP COMPUTER.

    I DOWNLOADED THE NEW VERSION UPDATE OF P2035 HP/SUPPORT STILL THE SAME PROBLEM. I FORMATTED MY DESKTOP SAME PROBLEM. I UNINSTALLED THE ANTIVIRUS BUT NO USE. THE OPERATION OF THE SOFT WARE TILL PRINTER CONNECT THE USB CABLE AFTER THAT NO RESPONSE. NOW I AM IN TROUBLE, SINCE I AM NOT ABLE TO USE THIS NEW PRINTER. I HAVE OTHER MODELS OF PRINTERS HP (P1006, P1102) AS THESE ARE INSTALLED VERY SOON. ONLY THE MODEL P2035 IS FACING PROBLEM.

    I INSTALLED THE USB 2.0 & 3.0 DRIVERS TO CHECK IT OUT. SAME QUESTION. EVEN WITHOUT INSTALLING ANY DRIVERS, ANY PRINTER IS ON AND JUST CONNECT WITH THE USB PRINTER CABLE TO THE COMPUTER IT WILL RECOGNIZE. THIS PRINTER HAS NO ANSWER AT ALL.

    NOW WHAT SHOULD I DO?  IF YOU SOLVE MY PROBLEM, I TRY TO INSTALL MY NEW PRINTER.

    Thank you

    PRABHA

    (PII removed)

    Hello Prabha,

    Thanks for posting your query in Microsoft Community Forum.

    1. Do you have an error message when it is not detected? If YES, what is the exact and complete error message that you receive?

    I understand that the USB device is not detected by your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

    If method 1 does not work, try Method 2.

    Method 2:

    Remove and reinstall all USB controllers.

    1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of the categories of equipment, locate and expand Bus USB controllers.
    3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    4. Restart the computer and let the USB controllers get reinstalled.
    5. Plug in the removable USB device and test to make sure that the problem is solved.

    If the problem persists, go to method 3.

    Method 3:

    Disable USB selective suspend framework. This method prevents your power off USB device.

    1. Click the Start button, type power management in the search box, and then click choose a power plan.
    2. Next to your currently selected plan, click Change Plan settings.
    3. Click change advanced power settings.
    4. Click in the box USBsettings, and then expand the USB selective suspend settings.
    5. Click on the area, and then click the menu drop down and select disabled.
    6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
    7. Click apply, and then click OK.

    If your problem still exists, go to method 4.

    Method 4:

    This method will install the latest drivers from device to your USB device.

    1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
    2. Click find updates. When the scan finished, click optional review updates.
    3. Click the check box next to the update, and then click install updates.
    4. If you are prompted, read the license agreement, then click I agree.
    5. Follow the instructions on the screen to download and install updates.
    6. If you are prompted, restart your computer.

    More information: Update a hardware driver that is not working properly

    If the device fails after updating the driver, you can try to roll back the driver with its previous version.

    Restore a driver with its previous version

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

    Kind regards

  • LASERJET 1022 device not recognized USB

    When I connect my laserjet 1022 printer on my computer, I get the message "USB device not recognized". normally, I use Windows 7 64 bit, but I try to connect another computer that has Windows XP OS. Win7 or Win XP allows to print anything with appropriate drivers. I think that this is not a driver problem, it seems to be a hardware problem. Everybody respected this problem before, I can't use this printer.

    also we have an another 1022 that works, I replace my printer to it and my printer is not yet printed.

    If I have a hardware problem somebody advice me anything.

    Thanks for your help,

    The printer will print a test if not connected to the computer page? If this isn't the case, then the hardware problem is the printer that is connected.

    If you print a page of test if not connected to the computer, then the problem is on the side of the computer. Try another cable USB or port. Some computers, especially laptops, can have very delicate USB ports (my laptop Lenovo's ) and USB cables can go wrong.

  • Gamepad - "Device not recognized USB" Windows 7 32-bit

    I own an INTEX it-gpo2 plugnplay Gamepad... earlier it used to work well... but these last days, when I connect it to my pc an error indicating "USB device not recognized" I HAV changed the port, but it shows the same error... I HAV tried also to install the drivers provided on the cd, but it also won't work... someone please help...

    Hi ArkaBarman,

    This problem is usually caused due to hardware or driver related issues. I would like to know some information about this problem so that we can help you further.

    1. have you made changes on the computer before this problem?

    2 What problem confined to the joystick?

    3. have you tried to connect the gamepad on another computer?

    4. What is the model of the joystick number?

    I would suggest trying the following steps and check if it works for you.

    1. click on Startand then click Control Panel.

    2. click on system and Maintenance, click System, and then click Device Manager.

    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    3     in Device Manager, double-click on it to develop a 'Bus USB controllers', right click on the controller host, click "Uninstall" and click "OK".
    4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

    Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

    Please respond with more information about this problem so that we can better help you.

  • Device not recognized USB keeps popping up - Windows 7

    I have been using a wireless keyboard with the Sony Vaio laptop with Win 7 64 bit for a year and, yesterday, the keyboard no longer works.  The keyboard works fine with 2 other laptop computers (Win7 and XP).  Even when I unplug the dongle, the message "USB device not recognized" keeps popping up ever minute or more.  All other USB devices (i.e., memory keys, portable HDs, etc) work very well.  I uninstalled all the USB controllers in Device Manager and rebooted (multiple times).  I tried to go back to a system since a couple of days restore point.  Nothing solves the problem.

    I wish that the keyboard to work again, but also really want the message stop appearing.

    Thank you.

    Thank you for your advice.  I tried all these.  None worked.

    Suggestions posted another user, I completely turned off my Sony notebook; has out the battery. waited a few minutes; restarted and viola - no more boring don't pop up error message, no error in Device Manager and I use the USB keyboard Adesso WKB-3000 wireless key in the response.

Maybe you are looking for

  • Is there a way of in Firefox to shorten a URL?

    I want to be able to shorten a URL without using the Google URL Shortener I use now. Is there an add-on or another way of in Firefox to shorten a URL? Thank you.

  • Satellite L750D shows the internal battery warning message

    Audio and video of my computer are slowing to almost as noise. I recently saw an error/warning note onto the internal battery life ending (?) What does that mean? What should I do?

  • D recovery Partition is maximally and Red-can I extend partition on the drive HARD internal OEM?

    On my Presario CQ60 renovated, built in the recovery D: partition / disk hard internal (250GB) is appx. 12 GB but is maxed out, red color, and play with her risk of crashing the entire operating system (done).  Is there a setting I can do the d: / pa

  • Library not found or failed to load

    Hi all I am a first year student competely on LabView. Here's my problem: I got a file .vi of my co-workers, but I couldn't run. The problem is "this vi to own library is missing. According to the solution on the Internet, I selected the file and it

  • Cannot enter BIOS mode

    1. type of computer - ENVY HP dv7-7250nr 2 opporating 8 64-bit windows system Recently, I received this computer. It is amazing that the only thing that could use a change is the keyboard. I got this as a gaming PC, but the function keys can be acces