Current version of the data in the database has changed since the user has launched the process of update: tabular

Similar Questions

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• Current version of the data in the database has changed...

  Hi, I have an updated report which hurts...
  
  This is the SQL code for it:
  
  Select
  "ITEM_BOM_LINE_ID,"
  "ITEM_BOM_ID,"
  "ITEM_ID",.
  "ID_PROCESSUS,"
  "SEQ,"
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  "VOLTAGE_PROBE,"
  'POSITION ',.
  "POS."
  "DESCRIPTION".
  of ' #OWNER # '. " TOFC_ITEM_BOM_LINES ".
  where "ITEM_BOM_ID" =: P20_ITEM_BOM_ID
  
  In that select it the ID_processus or the item_id is defined. Cannot assign at the same time.
  
  The description field is what hurt. When I run the page and try to write something in the description field on a line where ID_processus is defined this error appears:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum = "B54E29267EC18630B58818FF4B710D41" element = '925466414031BD2DE082A6F954889340' checksum., update of "trailers". "" TOFC_ITEM_BOM_LINES ""ITEM_BOM_LINE_ID"= value: b1, 'ITEM_BOM_ID' =: b2, 'ITEM_ID' =: b3, 'ID_processus' =: b4,"SEQ"=: b5, 'QUANTITY' =: b6, 'UOM_CODE' =: b7, 'DESCRIPTION' =: b8
  
  It works fine when I write something in the description field on a line where item_id is not null. Also all other fields work perfectly.
  
  Can someone tell me whats wrong?
  
  Thanks :)

  Hello

  After a re-read of your OP, I noticed that
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  in your query.
  And it breaks when ID_processus is NOT NULL (and ITEM_ID is null), isn't?
  That's because you change (sort of) the QUANTITY and the UOM_CODE when that happens. Your query retrieves different values than those contained in the database (for example "instead of the actual value). And these 'new' values are compared with the values of database and then there is a difference. Where the error.

  But now: how to solve?
  What exactly are you trying to achieve with this construction? Is there a business rule that AMOUNT and UOM_CODE must be blank if ID_processus is not null? To add a constraint validation to your table and just show the values in your table. Or to show or hide a value of the terms of use. Or use another (made) column in your query that is not bound to a database field.

  I hope this helps...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Mru error: ORA-20001: error in MRU: line = 1 current version of the data...

  Hi, I get this error msg
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum
  
  I'll try to show a picture of the form in which I can edit and add data
  When I use the wizzard that's fine with editing but I cant creat a new element because I insert my primary key and that shoud be done automatically.
  
  New on OK
  My PK is the first col1 and col2 second
  I got a drop-down list in which I choose an item in col1 to just display items in my form with this value, here is a possible results more
  No, I want to change until col4 col2
  or add a line with the same col1 col2 different and some values for col3 col4
  But if I add a line I want to insert col2 to until col4 (and the PK of col1 shoud be automatically insert in my list of dropwdown I chose before)
  I want to col2, a drop-down list
  so it all works very well I got all the changes I want, but when I try register or update my changes I got the error above frome
  I think the problem is the primary cause key thing I want to choose a part manually but I
  
  to get the new line u uses the line link add but I use rather after my statement select one
  Select Union: P62_PNR_VOll, null, null, null from double
  to get my first pk automatically of my item in the drop-down list (in my case: P62_PNR_VOLL)
  How can I solve this error?
  
  thx for your help
  
  regadrs
  Falk

  Hi Falk,

  I ask you if there is already data in the table. You said no. :D

  If you do not need the data, you can delete it. Otherwise, you will need to change your number sequence from 41 instead of 1.

  To change your dialing sequence, you must file the sequence and recreate it. Run these two statements, one at a time.

  DROP SEQUENCE "E_BEDARFSTRAEGER_ID_SEQ"
  

  CREATE SEQUENCE "E_BEDARFSTRAEGER_ID_SEQ" MINVALUE 41 MAXVALUE 99999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE
  

  Sometimes the trigger can become invalid by doing this, if yes, just run the following again:

  ALTER TRIGGER "E_Bedarfstraeger_BI" ENABLE
  

  Andy

• Trying to access the electronic books in the library of our audience. Downloaded the software, but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.

  Trying to access the electronic books in the library of our audience. Downloaded the software, (Overdrive Media Console) but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.5.0.1. How to do only what I can read ebooks? People have suggested using IE, but I prefer to much HELP Firefox!

  Try to update the media player while using Internet Explorer. Windows Updates site uses ActiveX to perform "duties. Firefox does not support ActiveX.

• How to get the current version of the firmware of the ILO through VMware power CLI

  Hi all

  Task - need to know the current version of the firmware of the ILO (HP blades) and version the physical servers of IBM IMM.

  "I got the information through ESXi guest by ' smbiosDump | grep built-in-i"for IBM blades.

  For a server, it is easy to check by the manual connection. We need to check for multiple ESX hosts (also whole army has there own unique password)

  Is it possible, from where we can get this information from VMware CLI power by any script.

  We create 2 files, one for the hostnames of the host and in the other we can keep the password.

  Matt has a script that gets this information, see obtain information of Firmware HP to HP VMware hosts using PowerShell

• I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4 please guide properly.

  I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4

  Please guide properly.

  I use a 64-bit computer. I discovered the widgets were not made for earlier versions such as v7.4 had no 'library' to import these widgets to.

  Thanks for the reply but. I appreciate it.

• New version of the process, without affecting the current proceedings

  Hello

  We have long lived processes in Production.

  I noticed that if a new version of that process is deployed, that all instances of this process alive will begin to use the new version.  that is all the processes have not been completed.

  I'm just trying to work on what the best practice is to update a version of Production process?  Is there a way to make sure that all instances complete existing processes using the version they have been created with?

  I must:

  -deploy a new process and try just to allow for the current process to stall or fail?

  -Try to create a new version of the Application, or a parallel version of the process running side by side.

  If there is not a simple answer, so I see this as an important gap in the current implementation of process management.  Any thoughts would be appreciated.

  Thank you

  All instances of the current process will continue on the version they started with. All new instances will use a new. After the last 'in progress', instance is completed that the version is purged.

  Paul

• A later version of the Apple software update is already installed on this computer.

  Recently, I had a new iPhone 5, so I had saved my old iPhone 4 with iTunes so I could transfer all my information. But when I connected my iPhone 5 it came with this message: "the"Rachel's IPhone"iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.come to download the latest version of iTunes. " The iPhone 5 is iOS9.2

  So, I went on the website to download iTunes, since this was the 12.1.2 version and should be downloaded 12.3.2, went to do the implementation, then it came with the message: "a later version of the Apple software update is already installed on this computer." So, I tried to uninstall it (after each step on the Apple Support to do) but when I went back to uninstall all apple programs, I could not find "Apple Software Update", it wasn't in my programs...

  I did all the steps anyway, and the same message of "a later version of the Apple software update is already installed on this computer." came after I tried to reinstall iTunes.

  So, I guess my overall question is, what should I do? How can I fix?
  Please answer quickly.

  Try to repair the Apple Software Update of the programs and features Panel, remove it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Hi - I'm looking for the correction Adobe Illustrator 2014 1.2 update (ou.0.2) for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only visible update is Illustrator CC 20141 - that is what introduced bugs.

  Hi - I'm looking for the correction Adobe Illustrator 2014 1.2 update (ou.0.2) for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only visible update is Illustrator CC 20141 - that is what introduced bugs.

  The only thing I can think that may cause the problems I have a Mac Mini on the Mavericks.

  Dave

  Hello

  I discovered that my question above is a non issue. A user has triggered by watching the below article on Illustrator 2014 17.0.2 cc

  http://helpx.Adobe.com/Illustrator/release-note/Illustrator-17-0-2-release-notes.html

  He had recently improved to wht, we know now is 18.0 to 18.1, which is the latest version. He has read the foregoing artic

  the and assumed that it was a version of fixed a bug for its version - as the number of ov18 v17 is not displayed. It is usually just 2014 CC.

  I asked him to post a bug report on Adobe Illustrator CC 20141

  Dave

• "The current version of the database has changed since... "Error

  Now I downloaded my application at the APEX. ORACLE.COM and my workspace is PSGCA and I have problems with the page 310 - details of the Bill.  How can I get the APEX. ORACLE.COM gurus to look over the page?  I'm having a problem with the part detail of this master-detail page.  Specifically, if I add data or update data to the captain only section, no problem.  This is when I need to update the data on the detail starting with my problems section!  If I add to the start of the line, no problem.  If I add information to a field null, no problem.  The problem arises when I want to change the HOURS/DAYS and COSTS.  He will take the initial value, but if I want to change then I get the error "database version has changed since... »

  No indication of this error would be greatly appreciated!

  Do you guys need for me to add table definitions and sample data.  In the past, I was told that it was not necessary; everything you had needed was the page.

  Is this correct?

  Can I add data and table definitions?

  For some reason that I could reduce it to the format mask on the expenditures column, which has been

  999G999G999G999G990D00PR
  

  When I changed it to

  999G999G999G999G990D00
  

  everything magically started working.

  For people wondering about the PR:

  PR

  9999PR

  Returns negative value in . Returns the positive value with a beginning and end empty. Restriction: The PR format item can only appear in the last position of a model number format.

  Documents: http://docs.oracle.com/cd/B19306_01/server.102/b14200/sql_elements004.htm

  I'm not sure why this particular mask causes. Because checksums are generated, I ran this sql to take a guess:

  select
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw(exp1)) md5_val1,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw(exp2)) md5_val2,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw('1.00')) md5_val1_1,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw('1.00')) md5_val2_2
  from (
  select
  expenses exp1,
  to_char(expenses,'999G999G999G990D00PR') exp2
  from invoice_details
  ) a
  

  which produces this output.

  MD5_VAL1	MD5_VAL2	MD5_VAL1_1	MD5_VAL2_2
  C4CA4238A0B923820DCC509A6F75849B	4DF59D42C9EE6119AEB2ADC95E7B7CF6	41CF2677CC4EC9356DAD8E76DFB87448	41CF2677CC4EC9356DAD8E76DFB87448

  Still not sure, but maybe it's to do with how and when checksums are generated?

  A space of drawing here - as you can see there is no guru, ace or oracle badge under my name, so I'm sure

  I've made changes on page 310, make backup to 24 but probably is not serious because your application is local. Probably no danger of change your credentials and/or remove your application.

  impressive effort on the example. This helps us better help you!

• Impossible to update to the current version of the software

  My iPad would not be updated wireless, so I tried to do it via iTunes (I have the current version). However, when I connected to iTunes, the summary indicates that my iPad is updated with IOS 9.3.5 (even when I choose Control upgrade).  Suggestions as to how I can update?  No harm in updating my iPhone.

  An iPad 2 can't be updated past 9.3.5. iOS 10 requires at least a processor A6.

  (145048)

• Toshiba 40SL733 - current version of the firmware?

  Hello

  I have a Toshiba 40SL733 with FW version 27.4.2010 10.1.41.4 30 16:06:46. What is the real version for my TV? If this isn't the case - where can I get the current version and how do I get the update?

  Thank you very much!!!

  CU
  Daggi4us

  Firmware for Toshiba released in European TVs can be downloaded from this page:
  http://www.Toshiba-OM.NET/firmware.php

  Now, you can find the firmware:

  v10.1.41.9 40SL733F (France) for
  v10.1.59.5 for 40SL733B (UK & Ireland)
  v10.1.59.6 for 40SL733G (for all other EU countries)

• Update the BIOS on the current version of the envy 15-1060ea is F05 10/2009

  I am wanting to update bios on envy 15-1060ea current version 10/2009 F05, is the F.26A 04/2010 latest update and it'll work? + Can I install updates latest according to available F.2BA current 10/2010? on this site

  Hi Paulmc79,

  I see that you are looking to update your BIOS. You should stick with the updates of the BIOS under your model, which is the f.2bs A version. You can download that from this link.

  Thank you

• Photoshop CC is not updated to the current version on the desktop.

  I have two computers on CC, a Lenova laptop and a Dell Precision Workstation, the two Windows 10. On this last update the Lenovo updated fine, Lightroom and PS, Dell seems to be on the old version of PS, 2015.0.0 (screen with ladies face etc.). The Adobe Updater it shows than the current version. On my laptop the PS version is 2015.1.2, (different startup screen and the interface). The version of Lightroom on both machines are the same, 2015.4. (Current version?). I tried to uninstall Photoshop on my computer and reinstalling without change. I noticed the updater CC seemed to run and update on my computer but I don't think he did it on the laptop, which seems to be properly updated.

  If you uninstall again, clean and restart before you reinstall the cc application, use of the Adobe Creative Cloud cleaning tool to solve installation problems