Curse Client has stopped working

Similar Questions

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• I can't start my pc. Error: Microsoft Mobile Pc presentation adaptability Client has stopped working

  I can't start my pc in Normal Mode, it has a pop up notice (Microsoft Mobile Pc presentation adaptability Client has stopped working), but it starts in Mode without failure. How to find and install this software. PLEASE HELP ME!

  Hi, Tan,

  Try the suggestions of the links given and check if they help:
  http://answers.Microsoft.com/

  http://www.ehow.com/how _

• to say an error message: DotMac Sync Client has stopped working

  Client synchronization DotMac has stopped working... Windows will close the program

  http://discussions.Apple.com/thread.jspa?threadID=2475961&TSTART=0 MS - MVP - Elephant Boy computers - don't panic!

• Hot keys on VSphere 4.0 Client has stopped working

  CTRL-ALT does not work on my PC.  It works on others in society.  I tried EVERYTHING I can think of to solve the problems.  ESX 4 does not have hot keys as the Workstation version preferences, so how can you address them?  It worked until I had to recreate the image on my PC and reinstall the VI Client.  Of course install VMTools "fixes" the problem, but it is a problem when installing a Linux VM.  I have to hit CTRL-ALT-DEL, to accuse received the warning about sending this command to the computer, change etc the CD all that setting (or read an email or go to another application) and then go back and get locked until the next time I need the mouse.

  I googled everywhere and no luck - no one has never had this problem? !

  Thank you

  Charlie

  I had a similar problem before. If you have changed the default ctrl-alt keys in VI client WS will be affected too.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• Implementation error "ConsolePrint has stopped working" on Server 2008 for printing from any windows client PC 7.

  I have a domain system ADS in my organization. Server, but also the client PC is in the same domain. These last days we receive error "consolePrint has stopped working" then we print from any client PC.  We use the laser printer, printers DMP. Printers are connected directly to any customer PC and shared with other computers.

  When we print from a client, whenever we get this popup error on Server 2008 "ConsolePrint has stopped working".

  Please help in this regard.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• dfsvc.exe has stopped working

  whenever I'm going to run an installer for the game client from curse for a game the dfsvc.exe error has stopped working. all said debugging is to install windows dates but ive that has already done and nothing again. tried to completely delete all files in the .net framework and put it back, same problem tried repairing it was good and then tried to install the client and it stopped working again. If you have any information on any other thing, I try can u please let me know.

  Try SR and ask in the Forums of the curse.

  http://www.curse.com/client/

  Link of the curse Forums at the link above...

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Thunderbird has stopped working

  Hello

  Count 08/04/2014 Thunderbird has stopped working in my PC somehow. I am running Windows 8.1 Pro x 64. Before that day, everything was ok and Thunderbird was not working. I asked a few friends using Windows 8 and they have the same problem. Thunderbird load e-mail accounts and will not send and receive all of the emails. It won't even add a new e-mail account. This is the message received when you try to add a new account "sorry - we are unable to communicate with our server subscription. Please check your connection. ». If we're going to try to go forward and add a new account anyway the answer will also be that Thunderbird can not connect to any server. We have uninstalled Thunderbird and install several times in the last days without success. I was trying to delete the folder Thunderbird of the t in Program files, but I can't. Uninstall it and install new procedure including the deletion of folder was a solution a few years but it seams that now no longer works.

  Over the last 2 weeks Thunderbird started working only for a few hours and we have the same problem again. I asked about 10 people working with Thunderbird and they have the same problem right now and they have had the same problem during the month.

  Of course I turned off windows firewall and test if Thunderbird will work, but it was not a solution. I am running windows 8.1 Pro x 64. Thunderbird is not on the list of authorized or unauthorized software through the firewall, and I can't find any option to add the Thunderbird to the list to try to resolve the problem.

  I use BitDefender Antivirus and I disabled the BitDefender firewall and the same thing happens. I also disabled the whole antivirus functions after and the same thing. I turned from bot windows firewall and firewall BitDefender or off all BitDefender and the same thing happens. I checked the BitDefender firewall and the Thunderbird has full access.

  Also, I checked the Windows updates. I am not usually accommodate updates in my PC. I remember I have choose to not install Microsoft updates ever. I checked the State and he is near the top is not to install Microsoft updates. I also checked the "update history" and empty status is "you have not tried to install updates on your computer.

  I started windows 8.1 Pro x 64 in safe mode with network and started Thunderbird while windows is in safe mode, and it has the same problem.

  I am trying to add Gmail and AOL accounts in Thunderbird. The emails are all browser set correctly and working well or another e-mail client.

  Today (21/04/2014) Thunderbird has the same problem.

  Any help will be much appreciated.

  Concerning

  Here, you also have the copy of troubleshooting information if necessary.

   Application Basics
  

     Name: Thunderbird
     Version: 24.4.0
     User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
     Profile Folder: Show Folder
  

               (Local drive)
     Application Build ID: 20140316131045
     Enabled Plugins: about:plugins
     Build Configuration: about:buildconfig
     Crash Reports: about:crashes
     Memory Use: about:memory
  

   Mail and News Accounts
     account2:
       INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
  

     account4:
       INCOMING: account4, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

   Extensions
     bdToolbar, 7.0, false, [email protected]
  

   Important Modified Preferences
  

     Name: Value
  

       browser.cache.disk.capacity: 358400
       browser.cache.disk.smart_size.first_run: false
       browser.cache.disk.smart_size.use_old_max: false
       browser.cache.disk.smart_size_cached_value: 358400
       extensions.lastAppVersion: 24.4.0
       font.name.monospace.el: Consolas
       font.name.monospace.tr: Consolas
       font.name.monospace.x-baltic: Consolas
       font.name.monospace.x-central-euro: Consolas
       font.name.monospace.x-cyrillic: Consolas
       font.name.monospace.x-unicode: Consolas
       font.name.monospace.x-western: Consolas
       font.name.sans-serif.el: Calibri
       font.name.sans-serif.tr: Calibri
       font.name.sans-serif.x-baltic: Calibri
       font.name.sans-serif.x-central-euro: Calibri
       font.name.sans-serif.x-cyrillic: Calibri
       font.name.sans-serif.x-unicode: Calibri
       font.name.sans-serif.x-western: Calibri
       font.name.serif.el: Cambria
       font.name.serif.tr: Cambria
       font.name.serif.x-baltic: Cambria
       font.name.serif.x-central-euro: Cambria
       font.name.serif.x-cyrillic: Cambria
       font.name.serif.x-unicode: Cambria
       font.name.serif.x-western: Cambria
       font.size.fixed.el: 14
       font.size.fixed.tr: 14
       font.size.fixed.x-baltic: 14
       font.size.fixed.x-central-euro: 14
       font.size.fixed.x-cyrillic: 14
       font.size.fixed.x-unicode: 14
       font.size.fixed.x-western: 14
       font.size.variable.el: 17
       font.size.variable.tr: 17
       font.size.variable.x-baltic: 17
       font.size.variable.x-central-euro: 17
       font.size.variable.x-cyrillic: 17
       font.size.variable.x-unicode: 17
       font.size.variable.x-western: 17
       mail.openMessageBehavior.version: 1
       mail.winsearch.firstRunDone: true
       mailnews.database.global.datastore.id: 8057ef62-d03a-4da8-a08b-58764ba65fd
       network.cookie.lifetimePolicy: 2
       network.cookie.prefsMigrated: true
       places.database.lastMaintenance: 1397398207
       places.history.expiration.transient_current_max_pages: 104858
       plugin.importedState: true
       privacy.donottrackheader.enabled: true
  

   Graphics
  

       Adapter Description: Intel(R) Iris(TM) Graphics 5100
       Vendor ID: 0x8086
       Device ID: 0x0a2e
       Adapter RAM: Unknown
       Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
       Driver Version: 10.18.10.3345
       Driver Date: 10-31-2013
       Direct2D Enabled: false
       DirectWrite Enabled: false (6.3.9600.16384)
       ClearType Parameters: ClearType parameters not found
       WebGL Renderer: false
       GPU Accelerated Windows: 0
  

       AzureCanvasBackend: skia
       AzureFallbackCanvasBackend: cairo
       AzureContentBackend: none
  

   JavaScript
  

   Incremental GC: 1
  

   Accessibility
  

     Activated: 0
     Prevent Accessibility: 0
  

   Library Versions
  

       Expected minimum version
       Version in use
  

       NSPR
       4.10.2
       4.10.2
  

       NSS
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

       NSS Util
       3.15.4
       3.15.4
  

       NSS SSL
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

       NSS S/MIME
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

• Command ' / remotelogout ' has stopped working

  Hello

  The command "/ remotelogout" has stopped working after the upgrade the Skype to the latest version (7.1.0.105).

  Karel

  Download the new version 7.2:

  http://www.Skype.com/en/download-Skype/Skype-for-Windows/downloading/

  The / commands are server side controls and should not be affected by the version of the client (download in any case).

• Skype has stopped working

  I had this problem for the last few weeks. I tried the solution posted here, but it does not work:

  https://community.Skype.com/T5/Windows-desktop-client/how-to-fix-Skype-has-stopped-working-a-problem...

  Here's what he said in the event viewer:

  Name of the failing application: Skype.exe, version: 7.23.0.105, time stamp: 0x5723592e
  The failed module name: mshtml.dll, version: 8.0.7601.17514, time stamp: 0x4ce7b8f3
  Exception code: 0xc0000005
  Offset: 0x000d5b8e
  ID of the process failed: 0 x 1424
  Start time of application vulnerabilities: 0x01d1b5058ee17290
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Windows\SysWOW64\mshtml.dll
  Report ID: 1d58fe72-2109-11e6-9ea2-bc5ff449670c

  All advice on what I need to do to fix this?

  I tried to uninstall and reinstall already.

  Thank you

  You need to upgrade your Internet Explorer to version IE11 for Windows 7.

  https://www.Microsoft.com/en-us/download/Internet-Explorer-11-for-Windows-7-details.aspx

• Satellite Pro L20: Adapter WLan has stopped working and will not allow

  Hello

  I have a L20 Pro Satalite, which works very well. However, just before Christmas 2006, the adapter wireless (Atheros AR5005G) has stopped working.

  Windows XP Pro SP2 can see the adapter and network connections shows as being activated, but he sees not all networks.

  The Atheros Client Utility says that the adapter pases troubleshooting TI test diagnosis up to the Radio, when he says that the Radio is disabled and must be enabled in the Client utility.

  'Excellent!', I thought: opening the utility forward. Looked in the Action menu to find "turn on the Radio" is greyed out!

  Help!

  Any help is very welcome.

  See you soon,.

  Barry Smith.

  Is there a hardware option to enable and disable your wireless network card? (switch)
  You upgrade your Wlan driver recently? (If Yes, maybe with the wrong driver?)

  I had a similar problem once and resolved through driver updates... want to give it a try?

  You can download the driver generic Atheros (Version 5.0.0.107) available here:

  http://www.DD-WRT.com/DD-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip

  Concerning

  chain

• I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

  When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

  I suggest to see if there are updates or new versions available for IncrediMail.

  If still no luck, I suggest to ask the support of IncrediMail

  I hope this helps.

  See you soon,.

  J

  

• I tried to delete a spam message, but whenever I tried the program has stopped working. Any thoughts on how I can remove this message?

  I got a message from someone I know who included an attachment that did not open. When I tried to delete the message several times, the program has stopped working and when I reboot Mail message is still there. Any ideas?

  Hello

  1. What is the exact error message?

  2 have you made any changes to the computer before the show?

  3 What is this problem only occurs with email?

  4. what service provider or of the E-mail client that you are using?

  5. what version of windows are you using?

   
   
  I suggest you to provide more information about the issue.
  http://support.Microsoft.com/kb/555375

• delivery of VoIP has stopped working

  I couldn't use voip discount. Mentioned that the client to make voip calls has stopped working please give any recourse .thank you

  Hello

  You should check with the support of VOIP that you use and program in their forums (if any).

  Look for updates for the network drivers as well as your antivirus/antispyware/security
  programs as these can affect VOIP.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">