Cursed GTX 980 TI

Similar Questions

• GTX 980 and no splash screen

  I have a ti GTX 980 flashed running in a Mac Pro(on external power) 2010. It shows only a splash screen, however, so I attach a No 4 k monitor DVI port. Monitors Dell P2415Q 4 k (except for a random time) show no video until the initialization is complete. This means that I must keep an old DVI monitor on all the time to get not only the splash screen but even to get any video output at all on end of startup. Without a monitor DVI the Dells don't show any video and go mode 'sleep'. Bootcamp Windows 7 displays the same behavior. Any ideas?

  How the P2415Q is normally connected? If you try HDMI then try rather Displayport.

  If your card was flashed did buy you it from MacVidCards? If so, ask them for assistance.

• TI GTX 980 on external power

  It's smarter to run the 6 pin and 8 pin on the GTX 980 TI off external power supply, or is it better to run the six pins in the internal power supply and PIN 8 of the external power supply?

  Users say it is best to run all the form of power to the same source.

• GTX 980 TI still does not work

  I bought a GTX 980 TI knowing that I probably would feed the 6 and 8 pins externally. I thought it would work at least to normal loads while I built a more elegant solution. No dice. The machine just clicks and dies. I got a new PSU ATX modular power and jumped the Green and soil and can turn on the power. When I turn on the power supply with it connected to the 6 and 8 pins on the map, however, the power does not depend on it self. What gives? I found a PS jumped fastest way and dirty to power a card like this on the outside. PS won't even turn. Does anyone know if someone is always selling a solution mini itx 5.25 which can automatically detect and goes into the 5.25 Bay?

  I'm agree that normally one would expect this card to always allow to boot but would struggle at full load with just built-in power.

  In case you haven't seen them what follows are useful links about using a power supply with a Mac Pro.

  http://aphnetworks.com/tutorials/psu_paperclip_trick

  http://forums.MacRumors.com/threads/how-to-guide-install-auxiliary-PSU-without-d rilling - requires - soldering.1684482 /.

  on-HD-5870s-in-your-Mac-Pro-2009-2010.1076970/ http://forums.macrumors.com/threads/precise-instructions-for-Getting-x2-ATI-rade

  NG-a-second-GPU-w-w-o-soldering.1460429/ http://forums.macrumors.com/threads/How-to-Rig-a-2nd-PSU-for-Modern-GPUs-or-addi

  http://forums.MacRumors.com/threads/GPUs-with-aux-power-supply-CMP-2010.1714592/

  https://Vimeo.com/72823826

• Z420 HP: HP Z420 support gtx 980 ti

  Hello
  Does HP Z420 support GTX 980 Ti GPU?
  
  There are some problems, I am facing
  
  1. I put GTX 980 Ti GPU and changing the corsair PSU AX 860i but system does not work on
  
  2 - when I put GTX 980 Ti GPU and power separately yet system giving the beep and the red light
  
  Separately the means - for GPU I use different and default system HP Delta PSU power.
  
  3. when I try to run GTX 980 it with HP delta PSU shows insufficient power for GTX 980 Ti system, it took more power.
  
  Well help me I'm not what I'm doing wrong here.

  I wish I had an answer for you, but I don't see anything else to try.  The BIOS settings you tried are what I would have recommended.

• MAC PRO and Geforce GTX 980 ti

  I just bought a ti GTX 980 (only not flashed to mac). My MAC PRO 2010 IN Yosemite 10.10.5 system is supposed to have the latest drivers from quadro 4000 and k5000 as web base drivers where my new ti 980 should work, but the only response from switching on the computer is a black screen. I don't know what I have to do to get into the system or activate the drivers. I don't like to see the logo of apple or bootcam. I want to just use it with mac.

  My card is GIGABYTE 980 ti

  Help please

  Thank you!!

  Please read all THE information on all the links. You NEED to install drivers for this card.

  
  

  From:

  http://www.macvidcards.com/store/P49/Nvidia_GTX_980_Ti_6_GB.html

• GTX 980 + GT 120 (Mac) on a MAC PRO 5.1 (2012)

  Need help to install a NVIDIA GTX 980 and a GT 120 (Mac version) in a MAC PRO 5.1 (2012).

  See:

  NVIDIA Geforce GTX 980 Setup

• Pavilion HPE-H8-1221: will be a job of it Gigabyte Nvidia geforce gtx 980 with the mother of HP H8-1221.

  Nice day

  Looking to upgrade my Pavillion H8-1221 son with a better graphics card, currently it is running an EVGA geforce GTX 660 and we are looking for upgrade to GTX 980 it.  I was wondering if this will require an upgrade mobo as well or is the OEM card sufficient to manage this card.

  Thanks much for any help.

  SonicRising, welcome to the forum.

  I don't think that the video card will work on his computer.  980ti GTX requires UEFI in the motherboard instead of a standard BIOS.  The only BIOS update that is available is to win 8.  You will need to update in 8 Win.

  Regarding the upgrade of the motherboard, HP has their motherboards manufactured to their specifications.  Therefore, you must buy a Board that has holes that will correspond to the accessory in the case.  In addition, connectors can be owners, and may not correspond to those of the species.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Lenovo-ThinkPad-W541-20EFCTO1WW: is it possible to change/upgrade Quadro K2100M of GTX 980 M?

  is it possible to change/upgrade GPU - Quadro K2100M of GTX 980 M in ws laptop Lenovo "ThinkPad W541' (20EFCTO1WW)?

  I like the laptop, but the GPU portion is not for pc games, so iwould like to know weather is it physically possible to change this QuadroK2100M in the Lenovo ThinkPad W541 games GPU i.e. GTX 980 M?

  Thanks in advance!

  The GPU is soldered to the motherboard, so he can't be replaced.

  The K2100M should still work good for the games.

  The 980M is also a map of 100 watts, while the K2100M is a map of 55 watts. There is no way the W541 can handle it, even if you can replace the GPU.

• GeForce GTX 980 TI

  Aspire Acer Predator 605 G3

  GPU: GeForce GTX 980

  CPU: Intel Core i5-4590 CPU @ 3.30 GHz

  Memory: 12,00 GB of RAM (11.92 GB usable)

  Current resolution: 1920 x 1080, 30 Hz

  Driver version: 353.30

  Operating system: Microsoft Windows 8.1 Pro

  I'm sure it's a 500 + power supply that exists in the required power supply for a Geforce GTX 980 TI would be a more than 600 or 650 +, but after doing some reading, the statement was made when it was said...

  then I went out and bought a power supply 650 and the Ti-980. It turns out that this Acer pc uses some stupid 12 pins that doesn't use any other pc.

  I assume that the connector is used to SUPPLY rather than the GPU, so be it we have a PSU that fits directly in that I can use a GTX GPU 980?

  Hello Durand1981,

  So here, the background comes down to this: use Gateway (now owned by Acer) connectors owners 12v for their motherboards. This connector is unique to their products and creating a very difficult environment for those who choose to upgrade their PSUS.

  However, despite the difficulty of work around the exclusive wiring, there is a solution to this. It comes in the form of a DYI rewiring to set an adapter to make a 24 pins ON the connector that is compatible with the 12v rail. You can follow the instructions here if you want to explore this option.

  I personally recommend getting a new motherboard to complete your new GPU to make sure that no problem of compatibility - Although this might cancel your license OEM Windows OS. It is the easiest, although the most expensive solution, but it also provides an extra layer, ensuring that your system is ready for future upgrades and downtime than this mobo owner + PSU combo almost forbidden.

• XPS 8300 and GTX 980 Ti

  Hello

  I have an a XPS 8300, I was wondering if it will work with a GTX 980 Ti assuming that:

  • Power supply is upgraded (already have)
  • fits in the case (go to check)
  • Updated BIOS (I'm sure that I have of the A06 Bios will check)
  • have minimum 8G of ram (I do).
  • Still using Win 7.

  from what I've read, 980 seems to work if you have the above. What about a Ti 980?

  is there anything else I should be worried?

  Thank you

  On this page there was a guy by the name of "SlimJ87D" who put a 980ti in a 8700 successfully. I think it's basically the same deal.

  Unfortunately, due to the connectors being the end of the map that they were under the metal aside for him then, he said, it was not enough space to put in the pin connectors, while his shear part of the metal that you see in the picture he posted on this page that I linked.

  You may need to do the same thing that ti 980 you get. He used the MSI file that is listed as 5.51 inches in height.

  A smaller in size might very well fit. Here "agentblue" said the ti-980 EVGA adapt without the need to change the case. The ti PNY 980 is similar in size to the EVGA so it would probably be good too. Most of the others seem to be larger.

• Alienware 18/w 2 x GTX 980 M 8 GB problems SLI - 8 beeps and no video now detected

  Hey everybody,

  I picked up a 'is' 18 with 2 x GTX 980 m 8 GB cards discreet alienware.

  When you first start up, I got the dreaded "8 beeps" and a black screen.

  I did a lot of online guides, and all said that one or two video cards must be bad.

  So, I opened it and removed the two cards and then tried to turn on without all video cards, which works 100% great.

  I think I tried put 1 card in slot 1, and turns, but in BIOS, Manager devices, GPUz etc, the video card is not detected.

  I tried the same thing with Slot 2 only and the same problem.

  I also tried to reinstall just the two and I still had 8 beeps.

  These video cards are worth about $500 + each, so I'd like to find a way to at least get a job if possible.

  Someone at - it ideas?

  Thank you!

  Both cards video with SLI cable, everything works correctly! Wow!

  For all those who come to this page, here is my best explanation of what was the fix:

  Remove the battery, remove the video cards, maybe reinstall OS, replace the battery so that the video cards are out, update BIOS to later restore the default BIOS settings, reinstall the video card (1 at a time).

• The stock 850w PSU is enough to power 2 - way SLI GTX 980 it?

  I want to eventually add a second GTX 980 Ti to my area 51 R2, but I am a little concerned about the needs running that will be such a facility. My other characteristics are the following:

  CPU: I7 5820 k OC'd to 3.8 ghz (level 2)

  RAM: 32 GB DD4 - 2133

  NVIDIA GTX 980 TI

  SSD 512 GB + 4 to 5400 RPM

  Thanks in advance for any help.

  I did it with area 51. This will work as long as you have not OC something crazy. I did and it stopped my Area 51 lol. Now just go ahead and bite the bullet and pick up a bigger power supply

  See my post very early

  en.Community.Dell.com/.../19668429

• Device not recognized in Alienware graphics (GTX 980 Ti, AW 15 R2 2016) amplifier

  Hello world.

  I have a problem with my Alienware graphics amplifier and Gigabyte GTX 980 Ti Xtreme Gaming gets, connected to my Alienware 15 R2 (Windows 10). I will describe the situation, and then include the details of the product later.

  Please note that the graphics card does not fit in my AGA, with gets fans, making the map too thick for the lid of the AGM close properly (it bulges on the side where the card is). I'm currently running by opening the lid of the AGM. Also, the AGM is not connected to any external screens, only to the AW15.

  When I run my AW15 without the AGM, it rolls with the edge GTX 980 M. I can play Rainbow Six seat (the only game in the testbed to date) to Max settings no problem.

  When I plug the AGM + the 980Ti and implementing power, things happening:

  • The entire system (AGA, AW15 + 980Ti) starts turning the power on. Everything turns on, the AGM fan spin, spin gets fans. He reached the first screen with the Klipsch brand image on it.
  • After a few seconds, the system stops. No lights except for the brick power connector and all fans of die down.
  • Another couple of seconds pass and the powers of the entire system to the top. This time, she continued turning the power on.
  • He stops at a black screen prints ' device not recognizedin amplifier graphic Alienware.» Graphic Alienware amplifier supports only NVIDIA or AMD Graphics cards. Press any key to continue...'.»
  • I press a key to continue. I even let it rest at this screen for about half an hour, with no difference.
  • The system will continue to boot normally, and I'm finally 10 Windows Home.
  • Look in the Device Manager recognizes two display devices: the Intel HD Graphics and the edge GTX 980 M.
  • The command AW Center indicates that the AGA is connected. It is said that external GPU is disabled, the internal GPU is on. I am able to play with the color of the light of the AGM.
  • The AW15 works and runs normally with the GTX 980 M edge, just as without the AGM.

  I'd appreciate any help to resolve or understand the problem. Thank you very much for your time. ^_^

  Technical details:

  • Alienware 15 R2, with processor Intel Core i7-6820HK, 10 Windows Home (64-bit), NVIDIA GeForce GTX 980 M (8 GB memory GDDR5), 16 GB of RAM (2x8GB), purchased in January 2016 at Dell website.
  • Alienware graphics amplifier.
  • Gigabyte GeForce GTX 980 Xtreme Gaming gets Ti
  • Alienware drivers up to date at the latest count from February 1, 2016, the Dell Web site.
  • GeForce Driver 361.75 WHQL for laptops, the NVIDIA site. Tested also with the same driver for desktop computers, with no difference.

  RESOLUTION

  Finally got the replacement of the card, and it is the EVGA GeForce GTX 980 Ti SC + ACX 2.0.

  He's stuck in graphics amplifier, Hung GA to my AW15R2 and now! Works like a charm! ^_^

  I don't know what is happening with the AG and the Gigabyte GTX 980 Ti Xtreme Gaming, but they are incompatible. The map has been tested to be very good. :(

• Gigabyte of R2 Alienware area 51 GTX 980 TI G1

  HELO everyone

  Ive wanted to change my GPU of a SLI GTX of 970 to a GIGABYT SLI GTX 980 TI G1. Ive been hearing rumors about area 51 R2 motherboard is not compatible, or something? Im not an expert in this so if someone could give me some advice on if it's fixed or not, I would be very grateful.

  My sheet atm are:

  Intel Core i7 - 5930K (6 hearts, 15 MB of cache, the overclocked up to 3.9 GHz w / Turbo Boost)

  Alienware Area 51 1500W chassis

  DDR4 Quad Channel 32 GB at 2133 MHz

  Hand of 256GB SSD 6 GB/s + 4 TB of storage 6kRPM SATA 6 GB/s

  Dual graphics card NVIDIA GeForce GTX 970 with total 8GB (2 x 4 GB) GDDR5 - NVIDIA SLI active

  PS ive purchased my alienware before alienware standard selling area 51 with 980 TI SLI gtx

  Hello

  I just spoke with our support tech LV3 Department and they have advised that there should not be problems with this configuration on the Alienware Area 51 R2. Let us know if you encounter any problems.