Cursor and default color for annotation
Hello
I am looking for a way to change the default color for the sliders and chart annotations. The default color is a bright yellow. I use white background graphics and they are almost invisible. Given that I have point find a way to change the default color, I searched for a way to detect that a cursor or annotation has been placed on the graph but there are no such events. Right now, the only way I found to solve the problem is to periodically read the lists of annotation and slider and change the colors of the sliders found in the black. However, this solution consumes precious tiles on my 500 MHz Geode CPU.
If there is a way to simply change the default color, it would be the best solution.
Anyone has an idea on how to do it?
Al hood
Hi Al,.
I do something similar in one of my applications, where a user can add cursors. I hijack the cursor event add and set the cursor before I add the cursor to cursor list.
Is not the same as defining the default color and I don't know how long this would save CPU, but it can be useful a go. Check the definition of the cursor cluster a typedef.
I know that the construction can be a problem, but this is just a quick fix
Dave
Tags: NI Software
Similar Questions
-
Limit default color for the chart of OBIEE 11 g
Hi, I'm using OBIEE 11 g (11.1.1.6.6)
When I use a graph (bar or pie), I note that OBIEE was only 12 colors by default to use in the chart. So it starts from blue, red, and so on, until the 12 color, then color 13 it will use the same blue once again, and so on.
The problem is that my column values are more than 12 (it could be 20, maybe 30, etc.). Thus, the color repeatedly makes no sense for graphics.
Could someone advise me please on how to increase the default number of default colors used by OBIEE (so that it will be like 50 default color set automatically by OBIEE,) just in case?
Thank you very much!Stewart,
the current graphics engine supports no more than 12 different colors predefined in venous thrombosis deep-graphic - skin.xml.
MOS [ID 1403233.1 | https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=117742688180992&type=DOCUMENT&id=1403233.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=bolbx0a6e_165]
>
# If you set less than 12 colors (for example only 6 colors), OBIEE will use the Oracle default colors for color n ° 7 to 12. Namely, your first 6 colors will not be repeated if you have more than 6 slices in Bie graphics for example.
# If you set more than 12 colors, OBIEE completely ignores your defined colors. -
How to change the default color for the text label
Hello friend
I have a question, Z10 Simulator has the default theme of the white background & Q10 thoroughly black theme, if I put a white background of the page, & txt for the label by default color is black on Z10 is good, but the same page on Simulator of Q10 has cause there default label text color is light (white grey) which is not visible.
It is a way to set the color of the default text of all labels in an application.
Thanks in advance
I think the best way is to use the same theme in both the model Z10 and bright theme Q10 or dark theme.
for this add-in
the light theme or
theme dark in your file descriptor-bar.
-
Can I set default colors for forms generated in first Pro CC?
I'm working on some video of the highlight where I need to generate an ellipse on each clip to highlight a player. I would use a yellow/yellow, the sweetness of 20%, the ellipse 8 thickness every time, but by default, PP gives me a ugly green/blue combination, and I need to change the colors of the indoor/outdoor, sweetness and thickness whenever I add a clip and generate an ellipse.
Is there a way to set a default indoor/outdoor color, thickness and smoothness setting for each new form generated so that I don't have to repeat these steps?
You cannot change the default behavior of the effect, but you can save it as a preset. It's easy.
or...
You could even turn the transparent video Clip into an asset in your project bin.
That might be more convenient and more accessible than a copy / paste routine.
Make a new sequence. > transparent Video Clip > Apply and design your Ellipse effect. (Do not apply framing key)
This sequence is now framed an asset that just waiting to be used and key aims.
-
Since the update to version 15.009.20071 and today 15.009.20077, I have no control of the drawing of the tools - lines always 'Reds' and the 'fill' is always transparent.
Before the update I could choose the line and color for filling tool tools right-clicking and selecting a range of.
Is this a problem of user (me) or has been removed from this capacity?
Your help is appreciated, as I frequently use these functions.
Hi Thomas,
If you use the comment line and you want to change the color or other settings then first draw a line, select and right click it and select Properties.
Please share more details on the other tool you want to know.
Thank you
Abhishek
-
How to change the default color for tables/pivot tables
Can someone share how to change the default font color or background for tables and PivotTables? In my view, there is a CSS or XML setting I need to change.
It is difficult to read the text when negative numbers are RED and the overall totals have a default NAVY background fill. I'm trying to find out how to change the color of these without doing it manually to each report.
Thank you.Jin
For pivot Table
Go to OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\b_mozilla_4\views.css
Change the PivotTable section code
For table veiw
Go to OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\b_mozilla_4\views.css
Change the section of the Table
PS:take backup your original file before you edit any css file. Don't forget to give the points/close the thread
Thank you
saichand.v -
default colors in flash CS4 with parameters alpha
In Flash CS3, you can set a default color with an alpha setting. I have not found a way to do this in CS4. Is there a way? Its nice to have default colors for shading that are easy to access.
Thank you
Is not his as we see the same thing. I can create a nuance to, say, green 50% alpha. Then create a new square and fill it with a different color to different alpha, say 100% alpha. Then I can apply the nuance, and it is the saved status green at 50% alpha. It's true that the alpha parameter will be recalled between choice of fill color, but the shade for me is to remember the correct value.
-
Photoshop CS4 and indexed color
The color swatches in the 64-bit version of Photoshop CS4 do not change to the samples used for indexed images, rather they show the default colors for Photoshop. I looked to see if there's a parameter to display the colors in use, but alas it not there no. Is this a feature or a bug?
Thank you
-Chris
Yes fair enough. I agree that the old way of work by which the changed plaletts automatically for the colors only you are authorized to use was better. It seems that now, you will save the tablet of color out and loading them in the color chart panle now, which is obviously slower and less convenient.
-
Data in graphic format (default colors)
Hi all
Where can I change color of the data in the chart? I know I could change it during graphic editing (disable the default option and define my own color), but nobody knows if is there any file (like xml or css) in which I could set my own default colors for chart?
Thank youWell, I wrote a few articles that can perhaps give you an alternative:
http://obiee101.blogspot.com/search/label/PCXML
http://obiee101.blogspot.com/search/label/chartconcerning
John
http://obiee101.blogspot.com -
PIXMA MG8220 default page for printing size is out for 6 x 4, need to letter
I have a PIXMA MG8220 and default page for printing size is out for 6 x 4, I need it to be paper letter size. I lose a lot of paper and cannot understand how to reset the default values on the individual mobile phones vs. using the printer printer?
Simon
Hi simonp.
To set the size of paper to print on, please follow these steps:
1. open an application such as TextEdit.
2. Mount the file and select print or press CMD + P keys on your keyboard.
3. Locate the PAPER SIZE field, and then select the format of LETTER paper.
4 search drop-down list labeled PRESETS, then expand this menu and choose SAVE AS.
5. enter a name of your choice for this setting by default, and then click OK.
Now we can select the above created the preset in any application you are printing from, with the default paper size is letter.
I hope this helps!
-
change the default color of the current time display
I want to change the default color for the display of the current time from blue to orange. Is this possible in 2015 CC?
Yes, this change has been made first Pro CC 20141 update.
Currently, there is no way to return to the previous.
Please fill out this feature request: feature request/Bug Report Form
Vinay
-
How to set a different color for the items in selectManyCheckbox
Hello
I would like to change the background color of text element for each item in selectManyCheckbox (different for each element).
It is only 5 points which could be static reference or select.
I only know how to change background for all items
AF | selectManyCheckbox:item-{text}
Background: orange;
}
How to select concrete question text and change color for them alone?
I have the similar problem.
CSS - background color defined for each individual p:selectManyCheckbox checkbox - Stack Overflowbut it don't work for me because I don't have a structure very adf
I need somethink like this:
AF | selectManyCheckbox:item - XXXX text - select a question by number here in the list or the id {}
Background: orange;
}
I use selectBooleanCheckbox in the forEach loop
-
Set default color in black and white for HP Officejet 4500 driver
Is it possible to set the default color setting black and white driver and not in color?
I know how to change the setting for each document that I want to print, but I print almost all black and you want to set the driver up to always default to black so I did not change the setting in the properties of each time.
Thank you
Hi Ltaff,
I can't wait to hear that you have questions. This can be set in the preferences. Please see the steps below. If you would like more information about your product, click here.
1. go to the device folder and printer
2. right click on the device
3. Select printing preferences
4. on the quality tab, select the Advanced button
5. in the aspect tab, find levels of grey or black only printing
6. click on the text to fill the drop down
7. Select printing in grayscale or black ink only
8. click on ok
9. on the Preferences dialog box, select apply (this keeps the setting)
10. then click ok
11. attempt print job
I hope this helps!
-
Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.
Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.
I was wondering if I saved a layer somewhere and set it as a default value.
If you group the layers, you will be left with a single layer, thus spreading your concern.
Suggest that you do the following:
- Make sure you have the latest drivers for your printers
- Reset the default preferences.
Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.
Items nearby and let regenerate the file.
-
Definition of default values for the inputs of button and the cursor?
Hello
I use Labview 8.5.1 and have a few entries button and zipper-type on my front. How can I set some of them having specific (as opposed to zero) default values when the VI is executed?
Thanks for the help
The default value for the type of slide of entry (or button).
Right-click on the control.
Select "Operations on the data" > "default to the current value of doing."
Maybe you are looking for
-
I can't find the setting in 23.0.1 to turn off the tabs. I don't use tabs and people with disabilities always have but for some reason any they have enabled and I do not know how to stop. Advice?
-
"Code" - no (on MBA 2011) photo images
2011 Macbook Air OS: El Capitan 10.11.4 Graphics card: Intel HD Graphics 3000 384 There are about 2 1/2 weeks (mid March 2016), when I go to look at a picture in preview, or just move the cursor to the bottom of the lists of jpg is to get a quick loo
-
S205 - problem with the keyboard (right shift key)
Hello. Google couldn't really help me, so I try my luck here Two days ago, I met a rather strange problem with the keyboard of my S205 (running Win7 64 bit). For some reason any the right shift key is no longer works as a shift key, but it has the sa
-
Only prints the left side of the page; If the envelope is present
My printer prints half the page if left an envelope in present in the document. I've never been sure that the problem is the printer or the program. I just upgraded from MS Office 2007 to 2010 and it does not solve the problem, so it seems that the p
-
Have a TV m8120n PC. You want to upgrade to the latest office of HP media. What is the best way to copy everything form my current comp to the new? They use Vista. Thank you