Cursor and window break problems

Similar Questions

• PSC 950xi and Windows 7 problem: not all pages are printed

  This problem has been reported by other at least 2 x in the past, go back for 2010, but there is no satisfactory solution that worked for everyone.  A real difficulty should not be available now?

  My PSC 950xi printer works perfectly with Windows XP.  Then I got a new laptop with Windows 7 and the 'good' HP driver has been installed automatically, as described in your Web site.  But now most of my impressions are incomplete; only the first part of the document is printed, and the last printed page is reduced by half.  Sometimes nothing prints. "Error" appears in the print queue, and I have to cancel the document to even try another impression (which then often does not work). I tried reinstalling my driver, as explained by HP, but without success

  A user suggested defining the "printer" HPCPP118 (RAW data type) processor (printer properties > advanced > Print Processor).  It worked for him.  However, it is not possible for me (and at least one other user) because the only available print processor is winprint.

  I hope you can help.   PSC 950 is not on the list of printers HP can't stand not (at least not on the list I've seen online)

  It seems to have solved the problem (1) Control Panel/hardware and Sound/display devices and printers, then right clicking on my printing device and select remove device. T (2) with printer, I unplugged my USB connector and then plugged back in and Windows 7 found the right printer driver automatically. (3) I had to wait a period of time (less than a minute) for the printer (re) - added to appear as the device by default and with the right image. (4) I never chose "Add printer" at all; Windows 7 was able to add a new when the USB connector is connected.

• Satellite A200-1 and Windows 7 problem - function button does not work

  I have computer does model no A200-1The and windows Vista for windows 7 32-bit, I changed a moment my function button does not work.

  What should I do now? Maybe someone greet me some player? Please help me I can use my driver.

  Do you mean the FN key or what?
  > Please help me I can use my driver.
  My English is also not the best but what do you mean with driver?

• scrolling problems, running of the depot, retro-typing and cursor and windows boxes freezing in the process of disappearance. Help!

  I have a dell vostro 1000 laptop with windows Vista Basic program. I aggravating problems with scrolling, on each program Web site. I have mozilla firefox, chrome, IE I started to scroll down a page and he yanks back the Summit. This also happens offline. I feel like a tug of war. The other problem is the flashing running drop boxes. When I go to lets say google and I click on the search box type it then starts flashing and hurtling previous search words. It is difficult to stop this. right now I have some difficulties to type this question because I'm going to type a few words and then the cursor disappears also a previous sentence. Sometimes when I go to type a word in the search type box the first letter and then the cursor will return to the leading space and adds the letters before the first letter of the word. I feel like sometimes I write backwards. Oh! time comsuming. It does also offline. I have a wireless keyboard and mouse that I sometimes use the mouse works, then suddenly, the page is pulled to the top and I can only It control a few times with the arrow keys on your laptop. Sometimes, this work and others do not. My AutoFill will in to fill out the forms but the name, the address box etc. will follow down the rest of the form and I do not see other issues. I tried Control Panel for mouse problems and the keyboard and settings sometimes move for the reason so I can't set some options. Can someone please help me I've been struggling with this problem for over a year.

  Hi Butterfly3,

  Welcome to Microsoft Vista answers Forum!

  ·         Does the problem occur even when working with other programs such as WordPad and Notepad?

  (A.) it can happen that if drivers are not updated, you may update the drivers for keyboard and mouse on your machine, see steps to update the drivers:

  (i.) click Start > type in Device Manager in the start search > expand the keyboard and the mouse in Device Manager > right click on drivers > click Properties > click on the driver tab > click on update drivers > click OK.

  Now, restart the computer and check if the keyboard and mouse works fine without any problems.

  (B) if the problem persists, you may need to perform the analysis antivirus on the computer.

  You can also perform a complete analysis of the Service from the link: http://safety.live.com

  A.) you can also check by reducing the hardware acceleration on your computer, follow the steps below to reduce hardware acceleration:

  (i.) click Start > click Control Panel > click on appearance and personalization > click personalization > click on display settings > click Advanced settings > click the Troubleshooting tab, and then click on change settings.

  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  (B) I suggest that you might have to reset the internet settings explorer explore on your computer, download the Microsoft Fix - it of the link which automatically resets the default browser settings, see the link: http://support.microsoft.com/923737

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CURSOR BLINKING WINDOWS XP PROBLEMS

  I have Windows XP Office. I have a master & slave to hard drives. When I start my computer, it displays a black screen with a cursor blinking in the corner. I would normally just re - install XP but I have VERY important information and don't want to lose him. I started it upward and went to recovery but still can not get it back. Y at - it a program or software that I can buy to recover my files? I was told to buy a "cable" that would eliminate the use of the crossing of riders (something that I don't know). Help, please! I'm not a computer pro, then you can use plain English (I know how to cut it on and turn it off)

  Hello

  ·        Remember to make changes to the system?

  ·        Have what measures you tried to solve your problem?

  ·         Have you tried to start in safe mode and check?

  I suggest you to check if the material physical connections are fine and if they are detected in the BIOS.

  I suggest you follow the methods mentioned below.

  Method 1:

  Start in safe mode and check if you are able to see the desktop. Follow the steps mentioned below.

  a. restart the system and then keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Check if you are able to see the desktop.

  Method 2:

  Check in last known good configuration. Follow the steps mentioned below.

  a. restart the system and then keep tapping F8 until you reach the start menu.

  b. Select last good known in the list and press ENTER.

  Check if you are able to see the desktop.

  Method 3:

  I suggest you follow the steps mentioned in the article below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 4:

  If this does not help, then I suggest do you a system restore recovery and audit. Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Satellite U500 - Eco utility and Windows activation problem

  Hello everyone

  I'm having some trouble with my satellite U500. Recently, I had to reinstall windows on my laptop and the problem is it not activate because of my motherboard was replaced some time ago (I have no more a recovery partition). I want to know is if it is possible to make it work again with recovery Toshiba dvd or by any other means.

  The other problem involves toshibas eco utility. Whenever I try to install it im getting an error message empty all I can do is click ok and then the installation is aborted. If someone had issues similar or is able to help me I would really appreciate it thx in advance. :)

  If you have original Toshiba Recovery disk use for installing Windows. Recovery image is already enabled, so it shouldn't be a problem. If you use a clean version that is another story.

  I hope that the Toshiba service provider has replaced the motherboard correctly and rewritten DMI information.

  Use please recovery disk and recovery image. This recovery image contains all of the tools of Toshiba and utility and all must be installed correctly including eco utility.

• Lock screen Satellite A100-153 and Windows login problem?

  I installed Windows XP Pro with Service Pack 1, everything worked fine, but when I updated the BIOS to 1.40 (WIN) at least once a day connection Windows crashes (I can move the mouse, but can't click on my username to type the password, alo TAB key does not work). Also, now when I press the key combination Fn + F1 to lock the screen, sometimes (not always) I can't go stay right back to the black screen!
  Someone knows what can be a problem?

  Hello

  According to these document Toshiba BIOS FAQ update of the BIOS can be done with 2 different procedures:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  It is possible that you have useed the wrong or bad BIOS BIOS update procedure.
  Well, it's not easy to say why the connection of the laptop freezes. The fact is that the Satellite A100 is a laptop very new and it comes with all service packs Microsoft (SP1 + Sp2). I don't know whether you have installed the device manually, but you must use the Toshiba Recovery CD.

  I would recommend recover the laptop with the Toshiba Recovery CD and finally, you check to see if the connection problem.

• Update the BIOS and Windows Update problem

  Hello

  I have a Pavilion laptop g7-2017us running Windows 7 Enterprise. October 18,2012, HP maintenance program informed me that he had to update my BIOS. HP maintenance program had not updated of the BIOS.  See my BIOS is F.08 (dated 03/05/12).  Manually, I been looking for the latest BIOS and found that it was identical to what is installed on my computer.  It seems that software of diagnosis of HP gave me false alarms.

  Question #2: I periodically install updates to Windows.  I saw my story updates and found 2 failed: one who is 'recommended' and the other 'Important '.  I looked at the error code and they are all two "80004004. I did google search and learned this is very serious problem b/c Windows is damaged.  I tried using Microsoft 'Fix It', but it doesn't seem to help.  Anyone have any suggestions on what I should do?

  Thank you

  Jeff

  Open an elevated command prompt and type of each of these commands, press ENTER after each command, key when done try windows update in Control Panel. Don't forget to include spaces.

  net stop wuauserv

  rmdir /q /s %windir%\SoftwareDistribution

  rmdir /s /q %windir%\system32\softwaredistribution

  regsvr32 /s c:\windows\system32\wuaueng.dll

  regsvr32 /s wuaueng1.dll

  regsvr32 /s atl.dll

  regsvr32 /s c:\windows\system32\wups.dll

  regsvr32 /s wups2.dll

  regsvr32 /s wuweb.dll

  regsvr32 /s c:\windows\system32\dllcache\wucltui.dll

  net start wuauserv

• DMA2200 and Windows 7, problem to connect

  Hello

  I used the DMA 2200 per year + with Vista 32-bit, version of PH, with no problems (major...).

  Now I have a new install of Windows 7 64 bit, also Home Premium edition.

  It seams like there is a connectivity issue between the DMA and PC.

  PC detects the DMA and I start configuring the Extender, it works fine until the Extender needs to connect to the PC (according to the user interface, get a warning and error in the log events for the Media Center, have not found a page to decode, but I think it's a timeout).

  Someone at - it had the same problem and found a solution or have any idea what to do.

  Now I have to move my old Disc (via BIOS) Vista (recorded the Disc boot... * beep * chance) and between the new disc of Windows 7.

  Finally managed to do work.

  I guess that something wnet wrong in the initial configuration.

  Noticed that when you run > netstat - a

  port 3390 was not included in the list.

  Removed the user from the Extender, changed the name of the computer, etc. etc. (do not know what solves the problem), but suddenly the port 3390 was in the list (I think it's the port where Extender tries to connect to the PC).

  Now the Extender installed smothly and * beep *, now the Extender works really well, faster then with Vista, this is how it was supposed to work initially, when the extension has been put on the market. Unfortunately I think that extenders have a difficult time in the market.

  In any case, I am very satisfied with the Win7 - performance of the Extender.

• Problems with the Windows and Windows Update problem of Installation of KB2416472 component.

  Original title: I use SFC. EXE

  Error detected

  How can I fix this, or I have to re - install window again.

  CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  The same with 0000015c detail above.

  00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repair

  Having a problem with the Update window for

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)

  I followed the recommendation, that nothing has changed.

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  Thank you

  Hello

  Problems with the Windows Sidebar?

  It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if

  Follow these steps and check if it helps.

  Logon as administrator-

  a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out

  b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.

  c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
   
  d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  e. then copy and paste each of them following their tour to enter

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work.

  Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.

  Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "

  As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.

  Windows install 4.5 Redistributable
  For maore information, see: http://support.microsoft.com/kb/2416472

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• HP Office Jet 4622 and Windows 98 problem

  I need to print from a program of Windows 98 on my printer HP 4622, but apparently HP 4622 will not support earlier versions of Windows.  How can I solve this problem?

  Hello

  The printer requires at least Windows XP to operate.

  Any earlier version is not supported and the device cannot be used on this subject.

  You can find system requirements below:

  http://support.HP.com/us-en/document/c03149922

  Shlomi

• 100% Windows 8 using the drive and Windows Update problem

  I'm going to completely horrible with windows 8.  I use the computer for two reasons

  1.) to run a machine virtual linux which performs calculations for my work

  (2.) to run a very small application that connects to another computer and updates a display based on what is sent to it.  This application also shuts down the computer when the network computer told him to.

  The computer is not connected to the internet, so I chose not to do the windows updates (in Control Panel, never check, do not update, etc...), now that I have a set of drivers that work well.  Took me to update to the latest version of windows 8 (not 8.1), so that the service representative would talk to me, and the problem is more serious.

  I also disabled windows update service.

  Also, after startup, svchost.exe takes 100% of the use of the disc for anywhere from 1 minute to 3 hours.  It is usually about 5 minutes, but takes more time after an update.  I reinstalled windows many times, and the problem persists.  When no other applications running, 10 minutes after the start, opening of windows Explorer takes about a minute.  This computer has a disk decently fast (I tried to replace), a processor quad core and 16 GB of RAM.  When running normally, it is extremely fast.

  My problem is that when I'm at work, a team of 20 or so programmers and engineers may have to wait up to 3 hours for the use of the disc down before you start to work because Windows 8 is unable to work properly.  How can I get rid of this?

  I am considering really just to start the linux and rewrite of the application image bit will run in windows, but I don't want the headache of Active Directory on linux.

  http://social.technet.Microsoft.com/search/en-us?query=Windows%208%20%26%20linux%20virtual%20machine&AC=5

  Try this link for windows 8 & virtual machine. Also, if it's a pc intel based,.

  go to intel.com/support/software/drivers,locate the update utility intel that

  will scan the pc for auto drivers/software.

  Even with the new CD of the OS, you must always configure the hardware on the pc for

  the operating system, most of the cds do not understand that. No windows OS takes also, that

  long to make it ready for the tasks, no more than 10 minutes without

  Progress, stop the execution of its tasks, its in an "open loop"...

• AVG and WINDOWS SECURITY problems 8

  Since the installation of Windows 8 Pro, the operating system is not recognizing my AVG Internet Security 2013 and Red Guard scoring only two windows and

  AVG Security are turned off.

  When I try and turn on AVG, nothing happens. The AVG Control Center is showing that my computer is fully protected, and all systems work

  correctly.

  As a temporary measure, I can turn off all Windows follow-up or activate the Windows Firewall and defender. I currently use the latter.

  I worked for a while with the support staff AVG, which were extremely useful, but we all verification, we can. Their point of view is that it is a

  Problem of Windows 8, because it worked perfectly under Windows 7 Home Premium, and I agree.

  I would be extremely grateful if anyone can shed some light on my problem.

  FYI main Hugh Parker my e-mail address is * address email is removed from the privacy *

  I had this problem too. I looked and looked for a solution without success. But there is a simple solution that I accidentally discovered the problem.

  1. go in Control Panel > administrative tools and run Disk Cleanup
  2 when the disk cleanup is finished to calculate how much space can be freed, click Clean Up system files.
  3 disk Cleanup recalculates and when to ensure that there is a check mark next to the Windows Clean-up update.
  4. click OK (depending on the amount of the Windows Update files to clean it can take some time.)
  5. When this is done, restart your PC/laptop.

  The problem should be solved, at least it was for me, if there is no 100% guarantee.

• Sony NW - E507 MP3 File Manager and Windows 7 problem

  Until very recently, I was using a custom PC with Windows XP Pro installed to transfer my music on the MP3 player using the "MP3 File Manager" software that connected the MP3 itself.

  Now, both my PC under Windows 7 64 bit and I found that I can't transfer music to the player more.

  Is there an alternative piece Manager style of files of the software available that will allow me to transfer files to my player?

  The player is in perfect condition and I'm reluctant to buy a newer model that my drive works fine except for not be able to transfer music to it. If there is no solution then I guess I might have to invest in a new Sony's MP3 player that has a software that is compatible with Windows 7 64 bit and later.

  Can anyone help?

  Thank you very much

  Rob

  The Walkman player is not compatible with windows 7 OS. You use Windows Vista, XP, 2000, 98 OS to transfer music to portable player.

  If my post answered your question, please mark it as an "accepted Solution".

• MagicJack and Windows 7 problems

  Any ideas on how I can restore my Magicjack in Windows 7? have tried everything to get the Magicjack to run in Windows 7 64 bit and I re - start or make a backup, I have to every time to lose and need to call their support to access my computer remotely

  You will need to contact MagicJack support people on this subject. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com