Cursor does not move in my planning application

Hi, Experts!

I seriously need help with the following problem: I just created a 9.3.1 Classic planning an application and built a simple data entry form but my up-down-left-right arrows do not move my selection from cell to cell in the form of data. When I selects a cell to write with a mouse and try to enter a value of data in it and press ENTER, the data value gets just erased and the cursor remains in the same cell. Could someone help me with what's going on? Thank you!

There are javascript errors produced, you see in the lower left corner of the browser, I would of thought that to be the most likely issue.
I would like to some suspect something like an implicit sharing but that wipes the cell when you click Save not only during data entry.
It happens if you go to through the space and work directly in the planning.
If you build a new form with members of different Level0 get you the same question?

See you soon

John
http:

Tags: Business Intelligence

Similar Questions

  • When typing password, cursor does not move & nothing is displayed also cannot get to any other control panel or in the region

    Original title: password

    I have Win7

    I know that my password

    My computer starts up & goes to the screen where I put in password.

    I type password but the cursor does not move and nothing is displayed.

    I can't go to any other control panel or in the region

    Help, please

    try taking your laptop battery, if it is a desktop computer, unplug it, for some reason, it worked for me

  • Microsoft Bluetooth Notebook 5000 - I can click but the cursor does not move

    Greetings,

    I have a Bluetooth Notebook 5000 mouse that has a weird problem. It is well connected to my computer bluetooth, and I have all the updated drivers. Since last week, when I move the mouse, the cursor does not move (on the screen), but when I click on (either on the middle left, right, even scroll to the top and bottom), it works.

    My guess is that the laser under the mouse thing is probably broken. I tried different surfaces to see if I got any kind of reaction, but none works.

    Now the other problem is that the PID (as well as other numbers) number under the mouse is partially illegible due to wear. I can't see the last part of the PID.

    Anyone got any ideas? And is there a way that it could be replaced under warranty, even with an incomplete PID?

    Best regards

    Philippe

    Hello Philippe,

    Thanks again for the update.

    It is possible that there is a hardware problem.

    I suggest you to contact Microsoft hardware support.
    Reference:
    How to replace Microsoft software or hardware, order service packs and replace product manuals
    http://support.Microsoft.com/kb/326246

    Thank you

  • Touchpad on my HP Mini 110-1125NR is locked and the cursor does not move

    I've never locked my computer.  Everything has been implemented in the store where it was purchased about 4 years ago.  I put my computer in sleep mode yesterday afternoon and just tried to use this evening... somehow, the touchpad is inadmissible and the cursor does not move.  He remains in the middle condition of the screen.  I turned off the computer and restarted, nothing done.  Can anyone provide a solution?

    Hello

    Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    If the pointer is still frozen, try double clicking the top left of the button.

    Kind regards

    DP - K

  • Satellite L350 - the cursor does not move

    My L350/L350D cursor won't move to middle of the screen after start upward. Everything is good with the system comes with display sreen & icons.

    Ideas please.

    Hey Buddy,

    I m a bit confused about your ad because it s not very clear, it means you the touchpad doesn't work and t, you can move the cursor?
    Have you tested if the touchpad buttons work properly?

    Probably you have disabled the touchpad. Simply press the FN + F9 key combination to activate the touchpad.

  • Cursor does not move on Trackpad by pressing the keyboard

    * Original title: Gaming/Keyboard and mouse

    I have a lenovo yoga 2 with windows 8. But I play games online and it took me a minute to notice but the cursor won't move on the pavement while I hold down a key on the keyboard. I can't seem to find anything that helps or applys t this specific system. Please help I would like to solve this problem

    Hello

     
    Thanks for posting your query in Microsoft Community.
     
    According to the description of the problem, I understand that the slider on the trackpad will not move while holding the key on the keyboard.
     
    I suggest you follow the steps below to disable the check of palm and check if it helps:

    Follow these steps to disable PalmCheck:
     

    a. in the start menu, type Control Panel
    b. Select Control Panel
    c. If not already enabled select view by: large icons
    d. Select mouse
    e. Select the device settings tab
    f. Select Settings button
    g. Double click option Pointing to expand the list
    h. Select PalmCheck and double click on it and set it to 0.
    i. apply the setting.

    Hope this information helps, just reply to the State of the question for assistance, we will be happy to help you.
  • Mousepad satellite will let me only to scroll, the cursor does not move.

    Starting to get frustrated with this laptop.

    I have to resort using a usb mouse able to get to the page, including something I want to do.

    Most will not move to any, he'd just scroll up and down (when you drag a finger).

    I tried to reinstall the driver, nothing helps.

    I've had this laptop for about a year now, never had a problem until now.

    He is literally out the blue. Research on Google, there seems to be a well known problem, but there is not a solid solution of the issue, which is ridiculous.

    The mouse doesn't move if I'm holding down either the left or right click, click on the button, which is useless for me.

    Any help?

    I don't know what model of laptop, you have exactly, but if you have problems using the internal touchpad, I recommend you to check the additional parameters of the touchpad:
    Control Panel-> mouse-> last tab (click on the settings button)

    If you will find all the settings associated with this touchpad problem, please check if the touchpad is not disabled. Usually the FN + F5 (in some cases FN + F9) would enable or disable the touchpad.

    Finally and above all, the issue could be related to a hardware malfunction but before talking about hardware problem, the laptop should be recovered to the factory settings.

  • Cursor does not move while I am now pressed keys-victory 8, Toshiba laptop

    Hello world. I'm on a Toshiba Satellite C55 A5182 running Windows 8.

    I need to be able to press the keys on the keyboard (key letter, specifically) by moving the slider of my. I use the trackpad, not an external mouse. But when I press that the cursor is frozen as if the trackpad is disabled. This happens in all programs, not only that I am wanting to use.

    Doing some research I found someone with a similar problem and it was solved by disabling so-called 'touch check,' but it's in Windows 7 and I can't find this feature in Windows 8.

    Any help would be appreciated.

    Hello

    Let me help you with this problem.

    Disable PalmCheck and check if it helps:.

    Follow these steps:
    a. in the start menu, type Control Panel
    b. Select Control Panel
    c. If not already enabled select discovered by: large icons
    d. Select mouse
    e. Select the device settings tab
    f. click on settings button
    g. Double click option Pointing to expand the list
    h. Select PalmCheck and double click on it and set it to 0.
    I. apply the setting.

    Let us know if it helps.

  • Magic Mouse does not move the cursor

    After I pair my magic mouse, it scrolls and the buttons work, but the cursor does not move. What can I do to restore the mouse entirely, or even remove the name? Or what else should I do to solve the problems.

    What is the new Magic mouse (MM2) you have?

    And you're running with Yosemite, as shown in your profile.

  • The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

    The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

    The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

       * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    
  • I want to slow down the pace. When I move the cursor at the end of the tween, to drag the end of the Tween to the right to lengthen the interpolations, the cursor does not change to a double-headed arrow, as it should to.

    Hello.

    I want to slow down the pace in an animation frame-to-frame hand drawn at 24 frames per second. When I move the cursor at the end of the Tween (24 images), in order to drag the end of the Tween to the right to lengthen the interpolations, the cursor does not a double arrow as it should, but changes to a black arrow with a small white rectangle with a border dotted, to the lower right of the cursor. Therefore, I can't extend the interpolations. Can anyone say about this?

    I am on the 20th day of a trial of Adobe Flash Professional CC, on an iMac osx 10.11.2 El Capitan. I use a Wacom pen.

    Thanks for any help. (I'm a complete newbie to the animation)

    Thanks for this very useful information and thanks to other members of the forum who also gave me great advice.

    I will experience more away, using the excellent information, I have now.

    Thank you all.

  • Content does not move with the work plan

    Kind of a matter of newbie, but for some reason any when I try to rearrange work plans most of the content does not move with it.

    How can I change the content to associate with a specific work plan?

    Oh, layers shouldn't matter, unless they are maybe locked.

    Make sure you click on the "Move art with work plan" option when the artboard tool is selected.

  • Cursor does not change when you move the link to context menu

    I created a text for a context menu link. The link works, but the cursor does not change from a pointed finger, the standard link icon.

    I don't know much JavaScript, but can understand it if it's just adding the code. This has been done in CS3. Any help would be appreciated! Here is the code:

    function MM_openBrWindow (theURL, winName, features) {//v2.0
    Window.Open (Theurl, winName, Features);
    }

    Thanks in advance.

    Todd

    A link would be nice, but I suspect you aren't gettign the finger (you know what I mean) when you hover over the link as your href is not defined on anything whatsoever.

    
    

    Set your href on ' # ' or ' javascript:; -the latter is preferred.

  • When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move...

    When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are

    (1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...

    what I've done

    I did a key recovery... even I am facing problem... Please tell me the steps to fix

    Original title: DESKTOP PROBLEM

    Hello

    Check with Lenovo support, their drivers and documentation online and ask in their forums
    on known problems.

    Support from Lenovo and downloads
    http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

    Lenovo forums
    http://forums.Lenovo.com/

    Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.

    =============================

    More troubleshooting if necessary:

    Error: Windows Explorer has stopped working
    http://support.Microsoft.com/kb/2694911

    Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
    http://support.Microsoft.com/kb/2681286#method22

    Performance and Maintenance<- check="" these="" especially="" the="">
    http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

    Other methods of troubleshooting to use according to your needs:

    Use the startup clean and other methods to try to determine the cause of and/or
    eliminate problems.

    ---------------------------------------------------------------

    References to Vista also apply to Windows 7.

    What antivirus/antispyware/security products do you have on the machine? Include
    everything you've ALWAYS had on this machine, including those you have uninstalled (they
    remains of leave behind which can cause strange problems).

    ----------------------------------------------------

    Follow these steps:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows
    Vista or Windows 7

    http://support.Microsoft.com/kb/929135

    Use advanced tools to solve performance problems in Windows 7
    http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    Optimize Windows 7 for better performance
    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Open the troubleshooter of Performance
    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

    To see everything that is in charge of startup - wait a few minutes without doing anything-
    then right click on taskbar - task manager - take a look at Applications.
    Process - Services - this is a quick reference (if you have a little box on)
    Lower left - show for all users, then check that).

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Is a quick check to see who are loading method 2 - using MSCONFIG
    then after a list of these here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what files, registry keys, and other objects
    processes have open, which DLLs they have loaded and more. This unique
    powerful utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically
    When your system boots and you connect. Autoruns also shows you the complete list
    locations of registry and files where applications can configure start automatic settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor file system, registry, process, thread and DLL
    activity in real time.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are
    loaded automatically when Windows starts. For each application, what follows
    the information is displayed: Type of startup (registry/Startup folder), Command - Line
    Channel file, the product name, Version, company name, location in the registry or
    file system and more. It allows you to easily disable or remove unwanted programs
    that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe
    not. The window Watcher says it all, every window created by each execution of the statement
    program, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp
    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Think about it an absolute must - manually update your drivers.

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded: run DriverView - set
    SEE drivers to hide Microsoft - update those with Dump in their names. (Also
    updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

    -Free - DriverView utility displays the list of all device drivers currently loaded
    on your system. For each driver in the list, additional useful information is
    Poster: load address of the driver, description, version, product name,.
    company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit Maker as replacements and system manufacturer of device which are
    the most recent. Control Panel - write - graphics card - device manager
    the brand and complete model of your video card - double click - tab of the driver-
    Note the version information. Now click on UPdate Driver (this can do nothing
    MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
    If there are 3rd party with their own software and drivers and the other main device drivers
    you have.

    Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
    and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
    their latest versions. (Look for the system to update the BIOS, Chipset and software updates
    Site of the manufacturer here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
    REBOOT after each installation.

    Always check in the Device Manager - drivers tab to be sure the version you are
    installation actually appears. This is because that some rollback of drivers before the
    later is installed (particularly that audio drivers) so install a driver - reboot.
    Make sure that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
    SCANNER - check manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using
    the above methods is preferable to ensure the latest drivers from the manufacturer of system
    and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable driver facilities
    in the updates of Windows, which leaves on Windows updates, but it will not be installed
    pilots who are generally older and cause problems. If updates provides a new
    driver then hide it (right click on it) and then go get new ones manually if
    you want.

    How to stop Windows 7 automatically install drivers
    http://support.Microsoft.com/kb/2500967

    ===========================================

    Refer to these discussions because many more excellent advice however remember to check
    your antivirus, the main drivers and BIOS update programs and also to solve problems
    with the first method cleanboot.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • The mouse cursor does not appear on the center of the screen to start upward.

    The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

    The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

    Suggestions:

    Go to Safe Mode:

    Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and selectSafe Mode with command prompt.

    1. in safe mode, please do a system restore. Choose the date where you did not have this problem as your restore point.
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.

    2. always in safe mode, do a check of the file system. See if file check will check for corrupted files and repair them.

    Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
    Note: there is a space between 'sfc' and ' / '.
    To sit and wait. It will take time.
    When finished, exit the cmd window.
    Reboot (restart your computer)

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

Maybe you are looking for