Similar Questions

• The mouse cursor does not appear on the center of the screen to start upward.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  Suggestions:

  Go to Safe Mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and selectSafe Mode with command prompt.

  1. in safe mode, please do a system restore. Choose the date where you did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. always in safe mode, do a check of the file system. See if file check will check for corrupted files and repair them.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Prblem with buttons; Cursor does not turn in the pointer (finger) into the mouseover state

  I'm programming the buttons on board animate, which are just symbols with their own timeline. I gave them actions to clicks, mouseover and mouseout/mouseouthandler(). They just call URL and are working properly, but I noticed that the cursor does not turn in the pointer (the hand with the index pointig) in the mouseover state. This creates a strange feeling, because users are not sure they are before buttons they click on them...

  Is there any solution for this?

  Thanks in advance!

  Hi Gzapiram,

  Click your button and in the properties panel, you will find a slider, with the auto default value section. Simply select the familiar hand cursor

  Gil

  

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• ccSvcHst.exe inhibits the CPU at 100% on XP Media Center 2002 (Service Pack 3). PC does not respond until the end of ccSvcHst.exe there domination of 30 to 90 minutes.

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  The list file you most often is a process associated with Norton 360. However, malware is sometimes assumed the names of the legitimate files in order to deceive the end user. Norton is a Devourer of known system and as a result, I wouldn't be surprised to learn that he is a legitimate file in your case. However, I recommend you download, to update and scan with Malwarebytes and Superantispyware, just to be sure. If the scans do not detect the file and the problem persists I would contact Norton or remove Norton making sure to use the tool to uninstall do.

  Malwarebytes.org

  SUPERAntiSpyware.com | Remove malware | Remove spyware - AntiMalware, AntiSpyware, adware!

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Left click of the mouse does not respond in the office and I could see 2 together (Picture) Office

  Everything works well today that the left click of the mouse is not responding on the desktop (icons does not meet the double click). Right click works ok, and left click works well on programs and in the taskbar.

  Weird things here, it's that I can see two desktop at the same time.

  I have attached a picture.

  Can someone help me?

  Thanks in advance.

  

  I got disabling the system restore, so I can't go back to a good version.

  Turn off the system restore makes things much more difficult. Your problem is probably due to an inappropriate registry setting. You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.

  Check the date of the file C:\Windows\System32\config\regback\System. It precedes the date when you became aware of your problem? If so, follow these steps:

  1. keep tapping F8 during the first phase of startup.

  2. Select repair in the menu that looks like this.

  3 log in as administrator if you are prompted.

  4. Select repair when prompted.

  5. Select the command line in the menu that looks like this.

  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands exactly:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  8 type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Cursor does not focus on the newly created line.

  I use JDeveloper 11.1.1.4. Whenever I create a new line in the table of the adf, the cursor does not focus on new line. He always focuses on the last line that clicked before adding the new line.

  see that this can give some ideas

  Information about ADF: creating a new line and create update auto focus

• Cursor does not change with the selection tool

  If anyone has experienced this?  My cursor suddenly does not change with the selection tools when working on the photos.  Once I roll over the image, the arrow disappears and becomes a strange 3 little things, so cannot do any work with precision.  Still using 7 PS in Windows 7.  It wasn't a problem before.  Already uninstalled and reinstalled and the problem is still there.  I searched where this can be corrected.  So far, no luck.  Any suggestions?

  Three cursors display in Photoshop, Bridge, and Camera Raw (Windows 7)

• Superior 1/4 screen does not respond to the mouse - cannot disconnect sites when Logout button is in this area, IE. Facebook, banks, etc.. This does not happen with IE. I reinstalled Firefox without result.

  Menu bar, tabs, history, research, etc. work fine, but in this area, I am unable to access anything whatsoever. For example, on the Firefox help screen the area on the right side of the screen that shows my user id - Sign Out - Inbox - and other applications will not respond to the mouse. Therefore, I will be unable to sign using Firefox. This is true for every Web site I have access. Fortunately, at least one of the banks that I use has an additional journal on area at the base of the screen that can be used.

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Mac Mini blocked, does not respond to the keyboard

  So, we have a mac mini since 2006. Since 2007, he has 24 hours a day.

  Now it has crashed, and while restarting it seems to be stuck at the gray screen with the apple logo.

  The circle under it is moving, it seems that it is still starting.

  I tried all kinds of different key combi any reboots, but nothing seems to work. Even the light caps lock does not work on the keyboard.

  Have you tried to dismantle the mini and put back together. No luck.

  Can someone tell me what is happening? Would appreciate your help!

  Best guess would be a failing hard drive. You can try to boot from the original CD/DVD comes with your Mac or DVD for an improved version of OS X, run disk utility to repair the internal disk partition.

  Note: It is advisable to restart your Mac on a regular basis as opposed to she works 24 hours a day for 8 years.

  It also helps to provide as much information as possible on your Mac. There are 4 different models MacMini that can be described as of 2006, and you do not identify the version of your OS X.

• pointer does not move in the games full screen

  My pointer do not move in the games when they are full screen on windows 7. In windowed mode, it works but it do not fit with all the games because I can't scroll.

  I've updated all my drivers...

  It's a well known problem with Windows Vista, but it had an impact on many users... seemed random.  Microsoft produced a patch for Vista.

  http://support.Microsoft.com/default.aspx/KB/932653/en-us

  Windows 7 can get a similar fix in time.  In the meantime, it is possible to download the Vista fix & install it via a right click on the Setup file, clicking on properties, then the Compatibility tab and it runs as an application in Vista.

  Nu WinBreak.com - video game Fanblogging

• gamepad Xbox 360 as seen in "Device Manager", but not recognized as "game controller": does not work in the game

  I connected my xbox 360 controller to my pc with the usb cable and downloaded the driver (I run XP Pro 32).  His does not work in-game.  I can see the controller in Device Manager (under the new group called xbox 360 devices) but it does not appear under "game controllers" in the control panel.  Im trying to use it with the Flight Simulator x.

  Hi Absolutemar,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your problem, please visit the below mentioned link.

  http://www.xbox360forum.com/Forum/

  Please perform the following steps also suggests:

  First we suggest you to download the Xbox 360 controller from the below mentioned link:

  http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx

  Then install the Xbox 360 on your computer:

  Note You must install the software on your computer before you connect the gamepad Xbox 360 for Windows on your computer.

  To install the software, follow these steps:

  1. open the software that you downloaded from the Microsoft Windows gaming website or insert the Xbox 360 Controller for Windows installation disc in your computer's DVD or CD drive.

  If the screen does not appear automatically, click Start, click run, type the following command in the Open box and then click OK:

  DriveLetter : Setup

  For example, if the CD-ROM or DVD drive is drive E, type type, and then click OK.

  2. on the configuration screen, click install.

  3. follow the instructions in the Installation Wizard to complete the installation.

  Note You may be prompted to restart the computer.

  For more information about the Xbox 360 installation on your computer, visit the below mentioned link:

  http://support.Microsoft.com/kb/906347

  In this case, you need more information, you can visit the link below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Games for windows Live does not work on the games?

  Hello

  I bought guerrilla red faction 2011 on steam. I did the installation of clicked cloth expected to download then when I got round to play, he said Xlive.dll is missing from you're computer re install the program can solve this problem. But anyway this isn't why I ask this question when I enter my windows live game isn't on the game I press home nothing happens so I can't save my game it says when I click on play on steam, it is said that its installation, but it does nothing please help I love this game into pieces! :(

  Many old games install an outdated version or GFQL.
  Try to download and install the latest version of GFWL-

  Download: Details games for the installation of software for Windows 3.5 - Microsoft Download Center - Download

  Support stuff more GFWL.

  Games for Windows - LIVE: Support Documents

  "When I enter my windows live game isn't on the game when I click on the game on steam, it is said that its installation, but it does nothing.

  Don't know what you're saying.
  -"When enter you your game;
  This would indicate that the game is installed, Yes?

  -"When I click on play on steam it says that his installation--
  While the game may have installed does not mean that Steam will allow you to play again. Almost always fixes/updates Steam games (even solo) before it will let you play.
  It is the same for the Steam Client. They tried to make updates at different times, and you have
  Let him do what he wants.

  -"I press home nothing happens so I can't save my game it says.
  You can usually save a game without logging in GFWL, but when you can't.
  or do not want to access GFWL online, it will not save your progress and stats on your online GFWL
  account for everyone to see.
  When a game when steam is offline, you can not connect to GFWL being GFWL
  a line only "Star".

  For more information, try medium Steam-
  Knowledge Base - Steam support
  .