Cursor starts to move all over the screen. How to stop it?

Similar Questions

• my mouse works correctly, it moves all over the screen on its own

  It started this morning very well, then unexpectedly, he starts slowly his way around the screen that I have never had this before, I use a trackball mouse, I already tried rebooting but also tried another mouse and even tried just unpluging the mouse and pluging it back

  Have you tried to use canned Air to clean the mouse?

  Using the uninstall/reinstall driver?

  Is the mouse still under warranty?  Contact manufacturer for a replacement

  There are nearby facilities that could conflict with the mouse?  Router, cell phone, phone?

  Yet away from the system.

  Here are links to support Logitech on the same issue

  See the latest response/resolution on the first thread.

  http://forums.Logitech.com/T5/keyboards-and-keyboard-mice/erratic-mouse-behavior/m-p/325613 
  http://forums.Logitech.com/T5/mice-and-pointing-devices/erratic-MX-performance-mouse-issues/m-p/711968

  http://forums.Logitech.com/T5/mice-and-pointing-devices/anywhere-MX-cursor-moving-on-it-s-own/m-p/663284

  http://forums.Logitech.com/T5/mice-and-pointing-devices/bought-a-Logitech-MX620-wireless-laser-mouse-erratic-mouse/m-p/344362

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• My counter top is everything about the place. the upper taskbar is ok. the background is all over the screen.

  My office is irrelevant. the upper taskbar is ok, but inside, we're all over the screen

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://Windows.Microsoft.com/en-AU/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite C600 - slider running around all over the screen

  I was delivered just the C600 Satellite and I can't type my cursor running around all over the screen. I followed the advice of other threads without success. 'FN + F9' does not disable the touchpad, and there is no touchpad under Mouse Properties tab. When I search the computer for "touchpad", in fact, there is no answer.

  Please advise!

  Hello

  Why try to disable the touchpad?

  The Satellite C series there is a BIOS update that will resolve this slider skip the question. There are already a lot of discussion here in the forum:
  http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

  Check this box!

• When you type my letters go all over the screen, everything happens with Firefox.

  After installing Firefox, when I type, the letters are going all over the screen, to the place where I try to type. I used to type without looking at the screen. Now, I have to watch... my cursor disappears, and the letters I type get into something that I previously typed correctly.

  Is when I installed Firefox, and it happens constantly.

  You have this problem when running in Firefox SafeMode?
  http://support.Mozilla.com/en-us/KB/safe+mode
  Do not choose anything at the moment, just use 'continue in safe mode.

• My office has changed color and is all over the screen

  Please help me if you can. Suddenly my office is simply not the same, the color changed and graphic design is all over the screen. I tried Aero who did something for you tell the truth, but he said there is always a problem to solve. It is recommended to go online to find the solution.

  Aero helped me 50% of the problem, now I find myself with the other half.

  It's like a sort of shadow on my screen. and my sidebar goes black. I had to delete all my gadgets, I couldn't see anything.

  Thanks in advance for your help.

  Georges.

  Hello
   
  Method 1:
  
  Troubleshoot Windows display the text on the monitor is not readable
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/
   
  Method 2:
  
  Uninstall and reinstall the display drivers and see if that helps.
  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the graphics card, right click on the map
  (d) click on uninstall
  (e) now go to your computer/device manufacturer site,
  Download the updated drivers and install them.
   
  Reference:
  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• mouse not working not properly. It jumps all over the screen by itself

  Since the upgrade to the latest version of El Capitan, I have a problem with my mouse and my Trackpad 2. The trackpad does not at all even though it is connected and bluetooth works. The mouse jumps around on the screen and it is difficult to land on the site I want.

  If the mouse you mention is a Magic Mouse 1, which is probably the reason why.   Magic mouse 1 works up to a point, but you need Magic Mouse 2 for maximum effect, once you have upgraded to El Capitan.  I would add, with new OS on the horizon (Sierra), your need for MM2 becomes even more pressing.

• Will not except the wordpad window placement... is moving all over the screen.

  I have this annoying problem... I open a wordpad document and set the widnow investment that I love and that you close the document. When I re - open the document window has shrunk and moved to another part of the screen.

  Often the window will be very small... almost half the size of my screen.

  I know that I can use the properties to maximize the window always open to but I work with several documents simultaneously and need access to my other links and expanded running does not allow this.

  Is there a way to keep the wordpad to remember the location of the window?

  And while I'm on this subject, my excel 2000 does the same thing, but it slides to the top of the screen, each opening until the title bar is off the screen (I keep my taskbar at the top).

  Thanks in advance

  Go to start / Control Panel / folder Options / display and check the box next to remember each folder view settings.  If it is already done, this obviously won't work.

  I don't know what else to think.  This should not occur and there is no settings in Wordpad to control this type of behavior (or on the desktop also).

  As far as Excel goes, try to post the question on the Excel Forum: http://social.answers.microsoft.com/Forums/en-US/excslcreate/threads where experts in Excel will be happy to help you.  Maybe this solution will solve Wordpad as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• NVIDIA Display 6200 I have lines all over the screen and I can barely read what writing

  I have lines on the screen and I reading wrong with everyone writing have the same problem

   

  This is usually a sign that the video card is failing or the monitor is going bad. Have you tried another monitor or tried the card in another computer?

• a vertical line white and pink shadow all over the screen

  I bought Dell Inspiron 15r 5521 in February 2013. Recently, the screen becomes pink when I open the lid. I line up the lid of the laptop in an obtuse angle or a sharp angle to get the normal screen.

  And a white vertical line began appearing left most of custom screen.it disappear no matter what.

  I press printscreen and pasted into paint to see if it is a software error. But the fine search. Is it a hardware error? I think it is caused by lcdcable rupture.please help me find my problem

  Connect an external monitor - the fault shows here?  If so, it's probably a bad video chip.

  If not, unplug the system, remove the battery and hold the power for 30 seconds.  Disconnect, then reconnect both ends of the LVDS cable that runs between the motherboard and the back of the display panel.  Check the cable of obvious damage - if it is damaged, replace it.

  If this does not resolve the problem, the display panel is the issue - replace it.

• My cursor jumps all over the screen while typing.

  Original title: TYPING PROBLEM

  MY CURSOR JUMPS AROUND WHEN I TAPE. I DID A SCAN BUT NO HELP.

  Ok. I use a Dell computer. I can only show how I do in my Dell computer.

  Basically, you need to perform the settings with touchpad you. He is too sensitive. When you start typing, you touched the touchpad inadvertently, and moved the cursor.
  Here's how I'd do...

  Right-click on a free space of the desktop > customize > mouse pointers > (this is where if you do not have a Dell PC, you may not be able to follow. But you should have an idea right after that).

  I click Dell Touchpad tab > Device Select > I would like to either click on 'Disable' under the Touchpad > or put a check mark on "Disable Touchpad when external mouse usb is present." > OK

  

  Another method >
  Click Touchpad > Touchpad settings > under tactile sensitivity, move the slide to the RIGHT (heavy)
  > OK

  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• So, basically I just want to complain about windows 7 built in game "hearts", I don't like this layout of games under windows 7, they are too widely all over the screen! Microsoft should make an option to change the layout of cards the same as it was in w

  Well, as I mentioned above, layout of cards that bothers me in game of hearts of windows 7.

  http://input.Microsoft.com will accept suggestions for 7 soon.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Portege Z30-A-191 - the cursor starts to move by itself

  Hello. I have a problem with the touchpad: sometimes (but quite often) the cursor starts to move by itself in a diagonal direction. Finally he stops, moving independently, but the problem can resume later. When the problem occurs, the notebook computer becomes unusable.

  I ask a technician here at my work, focus on the problem, and he said that the drivers are up to date.

  Is there any solution for this?

  Can you please do a little test. Remove the driver for the touchpad from the system and check its operation with "standard driver. Please send us comments.

• Re: Mouse cursor jumps all over the documents on Satellite

  Bought my Satellite in August 08. Cursor jumps all over the document, a spreadsheet, or a text document.
  I saw messages that the problem existed on Toshibas in 2002!

  How to solve this problem?
  How can this company having the same problem since 65 years?
  I would not buy another Toshiba.

  Help.

  > How this company may have the same problem since 65 years?
  Nice and funny statement. Really funny. I don't me remember more that this computer has developed there is 65years :D

  First of all, it would be really useful if post you a few details on your OS and your laptop model

  Secondly, I have read similar questions might appear if you accidentally touch the surface of the touchpad while typing. That is why it s advisable to disable the touch pad using the FN + F9 key and to check if this problem still persists.

  Last but not Lea check if you are using the latest version of the BIOS. If this isn't the case, then update it!

  Good bye