Cushioning system. Behavior appeared after I installed huge Windows 8.1 update on October 14, 2014
Hello
on 14 October, I installed the huge Windows 8.1 update.
Since the system works fine for about an hour after the reboot. Then he hangs, works again, stalls.
When at a standstill, the app bar upstairs will "pale". I can't enter anything during periods of pale, or scroll the page (it took me 10 minutes to simply enter this text...). However, the music using Windows Media Player continues to play very well.
I have an Inspiron 5521.
The CPU usage remains at around 25%.
The list of the Task Manager does not show anything unusual.
All the advice that will allow me to live a normal life of new calculation :) you'd be grateful or just share a similar experience.
Kuhlewampe
For a solution to this problem, see
Kuhlewampe
Tags: Dell Software
Similar Questions
-
I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?
Hello
Please, try the suggestions mentioned here and see if they help you:
http://www.thewindowsclub.com/failure-configuring-Windows-updates
Hope this helps, good luck :)
-
Error code 643 prevents me to install my windows was last updated.
original title: error code 643 prevents me to install my windows was last updated. Recently, when I go out I told me repeatedly that I have 1 new updates to install. It never goes away. Is there a link?
When I try to install the latest version of my windows update fails because of an error 643. Also when I leave my computer I tells me several times that I have a new update. This has happened every time that I have left the system...
Hello Ray Kouri,.
Thank you for using the Microsoft answers Forums.
Solution for code 643:
It is a common problem with the updates of the .NET Framework.
http://support.Microsoft.com/kb/923100
Follow the steps in the link above to fix the problem.
That should make the tirck for you.Thank you.
Kind regards
Augustine. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.
-
Original title: screen saver does not start because MSVCR100.dll was not found
After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:
ScreenSaver: Photo screensaver.scr - unable to locate component.
This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.
The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.
Help, please. Thank you.
Hello
It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.
But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.
-
Windows will work not day after I installed the windows updates.
The next day, I installed the Windows updates, I turned on my laptop a short Vaio splash screen is displayed and a black screen comes up saying that "Windows couldn't start. A recent hardware or software change might be the cause. "I don't have the installation disc of Windows that it suggests to use the software is preinstalled. The safe mode and last known good configuration and the start windows normally get Windows running. It is simply scrolls a list of code and ends with a line crcdisk.sys, goes to a blue screen for less than a second, then goes to black screen. All the help I could get to address this issue would be greatly appreciated.
If Safe Mode doesn't work no and you don't have a Vista DVD from Microsoft, do a repair disc to do a startup repair or a system restore:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.
There is no Vista free download legal available.
http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
See you soon.
Mick Murphy - Microsoft partner
-
Can not access the updates after clean install of Windows 7 Pro
I have formatted my hard drive digital, preformed a clean install of Windows 7 Pro. Everything went well and OS seems to be properly authenticated.
The question is not able to 'find' updates. At startup, the message: NEW UPDATES AVAILABLE. When I check the updates, the process runs "forever" and never completes the process. The problem would be to my use of Office 2003? I have installed for messaging and Outlook calendar. Here's the MGADiag.exe diagnostic tests.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 96DXD - 3PDHD-FC6KT
Windows Product Key hash: FiWgfb/HBGU plus 7qzKd5NATMcX2iI
Windows product ID: 00371-OEM-9314963-39295
Windows product ID type: 8
Windows license type: COA SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {0AC450E6-A3AD-405E-B244-B6074CECBF8A} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 100 authentic
Microsoft Office Standard Edition 2003 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]
Other data-->
Office details:
{0AC450E6-A3AD-405E-B244-B6074CECBF8A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-FC6KT 00371-OEM-9314963-39295 8 S-1-5-21-323565687-595391911-2700631585 Dell Inc.. Latitude D630 Dell Inc.. A16 20090714000000.000000 + 000DE083907018400FA 0409 0409 Mountain Standard Time(GMT-07:00) 0 3 DELL M08 100 100 Microsoft Office Standard Edition 2003 11 qQgWhuDYJMzZ2Ra9gyv5SUkXuJA = 70141-051-9705975-56000 1 960A2760EC8D866 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514
Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
Activation ID: da22eadd-46dc-4056-a287-f5041c852470
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00186-149-639295-02-1033-7601.0000-0102016
Installation ID: 001986425316033083061411071895367413981866374930874720
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: FC6KT
License status: licensed
Remaining Windows rearm count: 3
Trust time: 25/01/2016 10:58:11
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:
--> HWID data
Current HWID hash: NgAAAAEABAABAAIAAAABAAAAAwABAAEA6GGi4iOfPAyIevyQRoOYoLzXkIWCAxbA4Klv5iqF
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL M08 APIC
FACP DELL M08
HPET DELL M08
MCFG DELL M08
ASF! REFERENCE DELL M08
TCPA
M08 DELL SLIC
SSDT PmRef CpuPm
Thank you in advance for any help you can provide.
Firecracker.DWR
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
I also recommend that download you and install Service Pack 3 for Office 2003, then look for updates in the Help menu.
-
Original title: problem with Windows 7 Media center
Is there anyway that I can replace the whole C:\Windows\ehome? There is a permissions issue, and I can't find a way to change the permissions...
The only reason I want to do is I did a clean install of windows 7 and the plugin TV Pluzz.fr and the internet do not work on this computer and it seems to be no work around. But I have a PC where WMC works fine and I can replace the entire record of WMC and it should work like the other PC (I think).
I could do if I ran linux or something, but I'm looking for something simple or a fix to this problem with WMC.
Hello
Thanks for the reply.
It is too bad to know the steps in my previous post did not help to solve the problem.
I would like to inform you that starting from September 20, 2012, the experience of Internet TV is no longer available. You can consult the following Microsoft article that has the same information:
Cannot open Internet TV in Windows Media Center
http://support.Microsoft.com/kb/2801382/en-us
For problems with Netflix, I suggest you follow the steps in the Microsoft article and check following:
http://support.Microsoft.com/kb/972496/en-us
Also applies to Windows 7.
Please answer us on the State of the question to help you further.
-
Just installed Windows 7 Ultimate 64 - bit version. I have already installed all the updates without problem, but when I try to install one of the recommended update language packs my computer hangs during the update "facility" progress bar gets about 90% full. I never get an error screen, the computer just hangs, even the mouse becomes unresponsive. I waited for hours in the hope, it was just temporary, but I ended up having to reset the computer. He told me he could not update and restores the changes when it starts. This happens whenever I try to install a language pack.
Hello
I suggest that you follow the steps below and check if the problem persists.
Step 1:
a. click on Start
b. open the Control Panel from the menu display by (up/right) select one of the views of the icon .
c. click Troubleshooting. On the bottom of the screen, under system and security , select fix problems with the Windows Update troubleshooting tool . Follow the instructions.
You can also check the information in the following article.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updatesStep 2:
If that does not solve the problem, start your computer in a clean boot State and install the update to KB972813 . There could be a software program of third party in conflict with the update. Clean boot helps eliminate conflicts of third party software.
Note: Follow step 7 to restart your computer after you install the update in a clean boot state as usual.
Let us know the results.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Error code 2-24 while installing the Windows Vista Security Update KB2494113
Original title: Windows Vista security KB2494113 update
Have tried several times to install Windows Vista Security Update KB2494113. I get an error code 2 24.
Hello
Please follow the steps below.
Method 1:
Step 1:
Put the computer to boot and then try to download and install the update manually from the Microsoft Download Center.
Click on the link below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
NOTE: after installing the update successfully, please return the computer to start as usual (see step 7 link mentioned above)
Step 2: Manually install the update starting from Microsoft Download Center.
a. go to the Microsoft Download site, type the number of "KB" of the update in the search box and then click press ENTER.
b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.
c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button, and then save the update to your desktop.
d. When you are prompted, click open to install the update.
Click on the link below.
Microsoft Download Center
http://www.Microsoft.com/download/en/default.aspx
Method 2:
Follow the steps from the link below.
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Back up the registry
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
-
After installing add-on, everytime I open a new window or start a search on the web, there is a text of presentation boring jazz playing. How can I get him to stop?
If solve you this problem, post it here so that others can be helped.
-
Error - DRIVE - no IS NOT READY - the SYSTEM IS STOPPED after having installed a hard drive.
Original title: need HELP just installed new HARD DRIVE.
I adjusted has installed a new drive WD Desktop Hard in a Pent III; TRIED to raise the HD; computer and then tells me that the TRAINING SYSTEM - no IS NOT READY - IS INTERRUPED. I checked all cables & connections; & Yes by turning the hard drive. What am I missing or very probably wrong. Any HELP. Sincerely of Merlin
Hi Merlin,
Thank you for the information.
Have you tried to run a check disk from the BIOS (Basic Input Output System)? If this isn't the case, you can try to do a hard drive from the BIOS test & see if the problem still occurs.
If you are not comfortable with the BIOS, you you contact the manufacturer of your computer for help.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
10055 (setsockopt) system error appears after windows update in diet odin with a log in
I have power supply odin 9.1.0.5 installed in my home premeum Windows vista. It worked very well. but when I installed the updates from windows update security and tried to log in this error appeared. Please advise me how to solve.
Hello
See the bottom of thread that may help you resolve this problem.
http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/31d2736b-AC8C-479b-95ed-de080c93596fFor further assistance, I recommend you to contact the software publisher.
-
Just changed my old router live box for a NETGEAR router both at orange. Now can not receive or send emails using email [email protected], error 0 x 80048849. You can help solve.
Hello DavidClowes,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.
Do a clean reinstall.
Download a new copy of Firefox and save the file to the desktop.
- Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
- Uninstall your current version of Firefox.
- Do not remove the data of a personal nature when you uninstall the current version.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
-
FN bar does not appear after you have reinstalled Windows on Satellite A200
Hello.
First of all, sorry if my English is not very good, but I am French.
After a format, I installed some of the drivers of Toshiba. But, I'm not the bar at the top of the screen when I press the "fn". So I would like to know how the driver I need to install to have this bar.
PS: I have a Satellite A200.
Thank you for your help and I hope that you will understand me.Hello
Do not install some drivers but all only if you want to use all the features of Toshiba laptops ;)
The visible bar that controls the FN keys is Toshiba Vista Flashcards.
You can find this utility in the Toshiba value added package.But note; the common Modules located in the package of Toshiba value added too must be installed first!
Good bye
Maybe you are looking for
-
Qosmio F50-125 - yield is very low
I purchased a Qosmio F50-125 and right out of the box, it runs as a piece of junk. Everything is a little slow, when I boot it and it goes to welcoming screen, it says "Please wait" then 2 minutes. But worst of all is that everything is a bit slow an
-
I can't move my iphone 4s to ios 9
I tried to sync my iPhone to iTunes and he wouldn't let upgrade me yet, because I'm stuck on ios 7.1.2 on my iPhone 4s, with 9.46 GB free. Please tell me how to solve this problem, or if it is not repairable. Thank you
-
Unable to change the display settings of 100% to 75%
original title: Hi... I'm trying to set my screen to 75%. It doesn't matter how many times I changed it... It keeps going back to 100% once I disconnect. Please tell me how to set the screen for only 75%? Someon can you please tell me how to configur
-
can not open/download pdf file attachment to window live mail
-
I use Google Chrome only.
I only use Google Chrome and now for some reason when I click on the icon on my desktop I get another www.searchqu.com research field. I found it listed in the control panel and click on it to uninstall. He started to uninstall it, but then a mess