Custom data centers

Similar Questions

• vRealize operations - custom data center

  I have created two centres of custom data in the vRealize operations 6.1 Standard edition (each consisting of two Clusters of ESXi). After the creation of the 'health', 'Risk' and 'Efficiency' show gray question marks in the Statute, but the alarms is correctly filled. When I log out vRealize operations and you connect again (a little later) my custom data centers has disappeared. Someone has any idea how to solve this problem?

  Thank you

  Roland

  The grey '? "badges at the start are expected.  (1) the created object is new. (2) vROps needs time to aggregate scores badge for multiple groups added to your custom data center.  It is therefore quite normal.

  As to why they would disappear, I have no idea, but here are a few things to check.  Check under explore the inventory and see if your custom data center still exists as an object.  If this is the case, make sure that you connect back with the same user ID that you have created with.  Make sure that the user has permission to view this object.  Preferably, use admin if possible.

• HP workspace: where are located the workspace of HP data centers?

  Hey everybody,

  Where are located the workspace of HP data centers?

  Thank you

  Bill

  HP workspace is currently supported by seven, SSAE16-SOC certified, regional data centers, serving many countries. Data centers are located in Australia, Germany, Ireland, Japan, Singapore, and two in the United States (California and Virginia). The workspace of HP team will be allowing multiple data centers in the coming months to provide global coverage for customers. To see a current list of regional data of the workspace of HP centers refer to www.hpworkspace.com.

• Custom data type

  We use a custom data type container and add variables to use in the sequence inhabitants.

  It seems that the field of the local variable names having to match domain names that they have seized originally in the custom data type container.

  We want to reuse the custom several times in the sequence container for data type and would like to have descriptive field names of their use, which changes throughout the sequence.

  Is it possible to just rename the names of the fields of a local variable is of the type, data type container custom, while maintaining the field names the original custom data type container?

  With the help of TestStand 2013

  Thank you

  Hi CC57,

  I also recommend trying a templateVariable. You can use this to create a container with a particular name that you can copy in various places in the variable pane and change the names of the properties of confined there.

• DLL custom data type

  I try to use a DLL in LabView that talks about an acquisition card. One of the functions requires a custom data type (MID2250_MDConfig_t) that LabView does not support by default. It is defined in the C header file as follows:

  typedef struct
  {
  int CoordsX;
  int CoordsY;
  } MID2250_PointCorrds_t;

  typedef struct
  {
  MID2250_PointCorrds_t ULPoint [4];
  MID2250_PointCorrds_t BRPoint [4];
  unsigned short u32SADThresholdValues [4];
  unsigned short u32MVThresholdValues [4];
  unsigned short u32SensitivityValues [4];
  } MID2250_MDConfig_t;

  Is there a way I can integrate this data type in LabView correctly. I saw people talking about wrapper dll on this forum but I'm a bit confused as to who. Can I create a similar cluster in LabView and pass it to the function using "node of the library call?

  abdel2 wrote:

  I try to use a DLL in LabView that talks about an acquisition card. One of the functions requires a custom data type (MID2250_MDConfig_t) that LabView does not support by default. It is defined in the C header file as follows:

  typedef struct
  {
  int CoordsX;
  int CoordsY;
  } MID2250_PointCorrds_t;

  typedef struct
  {
  MID2250_PointCorrds_t ULPoint [4];
  MID2250_PointCorrds_t BRPoint [4];
  unsigned short u32SADThresholdValues [4];
  unsigned short u32MVThresholdValues [4];
  unsigned short u32SensitivityValues [4];
  } MID2250_MDConfig_t;

  Is there a way I can integrate this data type in LabView correctly. I saw people talking about wrapper dll on this forum but I'm a bit confused as to who. Can I create a similar cluster in LabView and pass it to the function using "node of the library call?

  Since the tables are all fixed size (and not huge), they really are inline in the structure. This means that you can simulate a cluster containing many elements inside because it is the elements of the array. The first Point of the UL would be a cluster containing 4 cluster with each two int32 in it. Ditto for the second element. The third is a cluster with 4 uInt32 and so on.

  Then configure the setting to adjust the type and thread this cluster, and voila.

• How to create a custom data type

  Hello

  I'm using Labview 2009 and I am trying to create a custom data type and link it to the global variable that will be deployed in cRIO 9073. I couldn't find a method to achieve this. Please suggest a way to do this.

  Thank you

  Guilhem

  Right-click on a control and go to advanced-> customize.  This will open the control editor.  Change the type of a control to a Type def.  Customize if necessary and save the control.

• Where to define new custom data types?

  Hello

  In the past (TS 3.5) I created our own range of custom type file that has been used

  to store the new data types and then referred the case to other colleagues. The file would be

  stored in the ...\Program Files\...\User area.

  My question arose because we now use the TS 4.1/4.2, which is no longer a separate

  Directories of NOR and user in \Program Files.

  Because now I want to change an existing custom data type, I find that our range of custom type has

  fallen by the way side, forgotten.

  Even though I can see the custom data definitions within the sequence of type files that use

  custom data types, which means that I can edit them locally, I intend to return to

  a range of custom type, i.e. comprehensive definition.

  What is the relationship between the definitions in a range of custom type and custom data

  definitions of type of a file of sequence?

  When a palette to update file a file of sequence?, who takes over in the event of conflicts?

  is a really necessary sequence files palette file if they are separated by using the same custom data type

  can update the other? What is good practice when defining custom types of data?

  Thank you

  Gary.

  Hey guys,.

  This is a very interesting thread, and I've got everything right, in heart, with advice given so far. I just wanted to offer some additional tips on the conflicts of kind - with more response, the initial question concerning the definition of what is priority in case of conflict.

  It is important to note that TestStand uses type names and version numbers to identify the different types. It is also important to note that when you use a definition of type of customers within a sequence, the sequence (.seq) file containing the sequence will keep a copy of the type definition. This greatly facilitates distributed sequence files. However, it also opens the door to potential conflicts type.

  TestStand allows only one type of unique name to be loaded into memory at any given time, so that it uses the number of versions of the type to try to resolve these conflicts automatically. For example, TestStand can be configured to load any type is the largest version number (note that this can be changed via the tab Preferences dialog box Options of Station).

  All this information and more are found in the following tutorials...

  Conflicts and TestStand Type Versioning

  How to make a Type of custom step?

  Thanks for your time. I hope this has been helpful!

• Causing problems of custom data type to deploy the shared target RT variable

  I seem to have some difficulty in using a shared variable published network created from a customized data type when it is deployed as an executable on a target of cRIO RT.  I'll start by describing why I think that this is the rub.  I created my RT VI in the LabVIEW (LV 2012) development environment and everything works fine.  This VI is quite simple, because these were quickly devolved into an exercise in debugging.  The RT VI begins by simply flashing the LED to a couple of times and then starts a loop simple acquisition to read some values out of the material using the analytical engine (while still flashing the LED of the user).  After reading the material, the values are grouped in a cluster and written in a shared variable published to the network defined by a custom control type def.  The custom control contains five floats double precision.  If it's important, the RT cRIO system hosts the shared variable in this case.

  So I have that deploy in the development environment, and everything works fine.  The LED flashes merrily along, telling me that the program runs correctly.  Running a VI host who reads the shared network has published variable gives the desired result.  Everything is good.

  Now, I want the cRIO system to run this simple program by itself at startup.  I build, set it as start VI, deploy it, and then restart the cRIO target.  The LED never flashing... the VI doesn't seem to work.  I'll spare you the major part of the work of debugging and access to the end.  I basically "diagram Disabled" various sections of the code up to the VI began to run correctly in an executable file.  I kept reducing the size of the disabled code until something has been disabled: the writing in the shared variable for the custom data type.

  So, I guess my question is this: are custom data types defined by type def would be personalized orders authorized executables to RT?  I read through the cRIO Developers Guide, my book of development in real time course of NOR and the white paper using shared Variables and I see nothing that forbids it.  I know that there are things not allowed in the executable files that are allowed in the development environment (property nodes façade, dialogue live, operating system specific calls, etc.), but no mention of the shared variable type custom data.  Any ideas as to why my VI is running in the development environment, but does not update unless I have delete the entry on the published network variable shared?

  Thank you in advance for your help!

  You must disconnect the data types of variables and then recompile. You can find it useful to keep on disk, a copy of the original lvlib.

  Don't know if this is a bug or not. It was suggested by someone in the forum that putting the ctl files in the right position (the disk? in the draft?) would allow the rtexe start; I did a quick check and it didn't work then I dropped the tests more far.

• Custom - Date field that is this feature called?

  I need to create a custom date field. It is personalized because it shows, on the one hand, whatever it is related to the dates and then it indicates that one choice at a time.

  Kinda like this feature

  

  I want to create something like that, but not the dates. I want to add alist like apples, mangoes, peaches, and plums have a scrolling after another, without showing a huge drop; So basically in the above format. Help, or coding sample please.

  I think you can do this with a SpinBoxField, if you extend it to support of Bitmaps rather than the text that is, it supports at the moment.

• Using node NHP groups in multiple data centers

  Hello

  I was looking for information, I'll implement a distributed deployment of ISE.   We have two data centers, each will have its own group of PSN node (load balancing), I need a strategy where we can ensure that all the DNA do not point to a single group of PSN node.  In the config switch that I only noticed that the radius server registration option where first is referenced and secondary IP is used only if the primary Radius Server is unavailable.  We have many sites of the direction we want to deploy ISE, we would like to distribute the RADIUS AuthC/AuthZ evenly between the two DC.

  Thank you

  -Amin

  Just so we are clear, ISE node groups did not-load balancing, you need a for this external load balancer. If you are actually using a balancer for each domain controller, then you might have half of your switches just manually use a vip for primary and secondary school, and the other half upside down. Also, if you use aaa server groups in your switch, you can also do a local switch 'balancing', based on the current session how are radius on each server in the group.

  http://www.Cisco.com/c/en/us/TD/docs/iOS-XML/iOS/sec_usr_rad/configurati...

• What is custom data objects?

  Hello

  What is the custom data object? Use of custom data object?

  Thank you

  POOJA

  Hi Pooja,

  The custom data objects are used to store data that can be linked to a Contact or company record and they are not part of your account or customer contact record. Custom data object records can also go by the name data cards.

  Use: -.

  Send emails to contacts who have tweeted about a certain subject.

  Contacts of segment and filter for inclusion in an email campaign.

  Kind regards

  Eloqua Experts

• Cvent Feeder should send information to a Contact record or a custom data object?

  We use Cvent to organize our event series each year. The event series contains ~ 18 events each year. This will be the first year we try Cvent trough to connect the information that we collect to Cvent and push it in Eloqua? Should push us to a record of individual contact or a custom data object?

  My first inclination is to match to a contact record. My reasoning for this is that the event creates many new perspectives and we want these people to become contacts in Eloqua, so that they can be put in feed and then also synchronized in Salesforce. Our Organization has also had a very limited use of custom data objects so far, we're still learning the system, and it's so advanced capabilities of segmentation may still be beyond our capacity at the moment. My fear is that if we were to store data of Cvent in custom data objects, data objects that can be linked to a contact record because they are quite new perspectives there. On the other hand, a lot of information from the event record (beyond names, emails and addresses) is really intended for a custom data object. Any advice as to how we should do that?

  My recommendation is to use a custom data object. -Especially if you store specific information about the event.

  While I'm not 100% on the configuration of Cvent, you probably have the ability to set the default mapping that relates to the LCO to the contact table. -It is usually an email address

  Otherwise, you also have the option of specifying the parameter 'Mapping the default used in Upload' for the CDO. -Make sure it is set up properly as well. -Yet once, it is usually to address Email

  As long as they are set up correctly, the system will automatically create a new contact for you if the 'E-mail address' the participant Cvent is NOT already a contact Eloqua... More importantly, if the 'Email address' the participant Cvent is already a contact-> a new contact will NOT be created. (Instead, the existing contact will be related to multiple records LCO)... That's what you want

  This way don't unnecessarily create you more contacts than you need to.

  Once you get this sorted out, you'll be amazed how it is easy to start to use these CDO into Segments.

  Let me know if it helps.

  ***********

  Chris Continenza

  Senior Marketing Automation Consultant at Tegrita Consulting Group

  Tegrita Consulting Group

  Web: tegrita.com

  Phone: 1.800.771.3308

  E-mail address: [email protected]

• How to migrate exadata overall in data centers?

  How to migrate exadata overall in data centers? Forklift (lift & shift) is only option for this kind of migration since we are talking about migration unit?

  Best practices/experiences around these migrations?

  Thank you

  Aerts

  Hello

  We recently had a data center move and moved some exadata machines to a new location.

  There are a few things to consider before the move is going;

  (1) prepare the network on the new data center and make sure all connectivity (for example, you can remote access to it) work.  In our case, the new centre has same network IPs.

  (2) download the seller who transported material Machines.

  (3) on the last day before moving, stop the Exadata Machine (close the database, RAC nodes db stop, knots of cell, endless tape etc...)

  (4) turn off the Exadata Machine

  (5) disconnect all network cables.

  (6) let the equipment cool.

  (7) transportation to the new location and move the machine to fix the Bay and wait for the machines to be acclimated

  (8) connect the network cables.

  (9) power on Exadata.

  I found a Support which also notes, you can view; What must be done when moving Cluster nodes to a new data center (Doc ID 1332423.1)

  HTH,

  Pradeep

• Can I evaluate and fill out a form with data from a custom data object?

  I'm not a developer, but I'm trying to find as much information for my web team so they can implement this for me.  We use the E10.

  I have some information for the contacts stored in a data object custom I want to use for pre-population information access door and in another form.  For example:

  1. User enters his email address into a form and hands
  2. A search and contact and custom data object (CDO)
     1. If the contact has a CDO with the required information, he fills the following form with the information
     2. If the contact does not have the required ORDER, it displays information and a link to the place where to go next

  Is it possible, and where should I direct my developers learn more about treatments?

  Richard

  Hi Richard,

  You can certainly do so using data for the Eloqua Web search (Setup > data Web Look Ups). A database search allows you to request data stored in Eloqua, bring up the page and with a few JS, we determine if they will go on track 1 or 2 you described above.

  

  Is that an advanced feature requires knowledge of HTML and JS. Here is a good article on data search that should help:

  Using the Eloqua Cookie to customize your Web site

  If you have any specific questions, our support team is very familiar with this feature and can help to solve problems or answer specific questions.

  -Andrew.

• Boxes and custom data objects

  I am creating a form with a list of checkboxes based on interests of customers - there are 8 in total and they can select several options.

  What I want to do is to create shared lists for each option which will serve as a member of segment for future mailings.

  I also need to store data for that person together so if I never, I can go and say ' well, Joe Bloggs here is interested in X, Y and Z, so I'll put him in the countryside, A and B'.

  Are the data objects custom the way forward? I had a go at creating and mapping it, but I don't know what to do with these boxes!

  Thank you!!

  For the shared list, simply use the step "Add to shared Contact list" of your form and make it to the condition that the box is checked. You will need 8 of these steps, one for each option.

  To preserve the data, I would like to use a custom data object. Create a new CDO set with an address field of the email and one for each of your boxes (and any other information you want, of course.) And then use the processing stage of 'Update Custom Data object - With Custom Values'. You can define this step to add a 'yes' or 'on' or whatever you want to the appropriate field in the ORDER. Yet once, make this step on the box being checked in your form. Yet once, you need to create 8 of these steps, but once you get the first fact, others should go faster.

  PS, I kept typing "from" instead of "form". Argh.