Custom in the 6.2 grid

Similar Questions

• My playlists on apple music continues to repeat the first progress song and custom to the next song

  My playlists on apple music continues to repeat the first progress song and custom to the next song

  Hi, tabby1008!

  Thanks a lot for the use of Community Support from Apple! After reading your post, I understand that when you listen to music from Apple, one song keeps repeating instead of skip to the next track, when it finishes. I wouldn't listen to the same song over and over again when Apple's music catalog is so big, so I'm happy to help you!

  First of all, check that the "repeat" feature is not enabled. The following article gives some information about the feature 'repeat' and what to look for.

  Use of music music Apple in the app

  The "Shuffle and repeat your music" section provides this information:

  Shuffle or repeat your music

  Press on at the bottom of the playback screen to mix songs in a playlist or album. Alternatively, you can ask Siri to scramble your music.

  Type once to play entire playlist or album looped or twice to repeat a song.

  When activated, the icon for a repetition will be "BOLD". If this is the case, type just the icon to activate the recurrence at the wide. The next page of this article will show you where these buttons:

  

  If the repeat function is turned off, try closing the music app using the steps described in the article below.

  Force a nearby application on your iPhone, iPad or iPod touch

  Once the music app is closed, press the icon to open it again and then try to play your songs. If one is always repeat, restart the device. Instructions on the way can be found in the following article.

  Restart your iPhone, iPad or iPod touch

  Good listening!

• Customer at the vs Site

  I am looking to buy a Prosecure appliance for a client especially for VPN functionality.

  To give some background, they currently have 5 sites of connection to a main offfice. I know their number of sites will grow.

  They will also have a casual user that needs to connect to the House. Don't know how much at this time, but I guess just a couple. Yet once, this number may increase.

  I saw on the technical sheets for several products, they have a limited number of connections to the site Site but you do not specify a limit on the client to the site.

  Customer at the site in the limit from Site to Site or unlimited?

  Unfortunately, support both chat and phone confirms that a customer on Site for recorded in the limit from Site to Site. Really hoped he wasn't considering the price jumps a lot for 25 VPN clients.

• The default alignment grid size

  How to set the 'SIZE of GRID ALIGNMENT default"?

  The default size for the façade was 12. Now, it's 100. I don't know how he got that way.

  I set the default size from 100 to 12 in the properties of the VI repeatedly. However, whenever I start a new VI, the size of the grid by default is 100.

  Why the default size remains at 100?

  -Rodney

  Tools-> Options-> façade scroll down a bit and you will see the setting.

• ActiveX refnum probe custom in the numeric form

  Hi all

  OK this can be simple or impossible, but I can't understand it.

  When you explore a thread of refnum ActiveX on the diagram, it shows a unique number (or 0 if its not valid).  This is useful if the refnum changes (like walking through an XML using DOMDocument)

  However when I tried to make a customized probe, the probe is refnum control icon if you do not see a number.  This doesn't help me.  I tried to change this control in the custom to a digital probe, but it breaks.  (in fact when I tried to use a table as the probe custom LV2010 for a table of refnum, it gave me a message about incompatible type and then it crashed)

  Is there a way to show the number of the refnum in a custom probe?  I guess it would be the same as showing the number instead of the control in a regular front diagram, so maybe he has to be separated first, but how the probe simple builtin it do?

  On a side note, using the window spy Probe, 1 d or 2D tables, the probe display just a single element.  Is there a way to expand the table to display more than 1 item in this window? All values on the left side in a single line, but with 2D especially tables it's hard to see where the next column starts.

  Thanks for your help.

  TS9,

  Please refer to the following Knowledge Base when you attempt to display a value of refnum in labview. Using type cast to U32 I could extract the refnum and the output of an indicator number using the following code. I had to make the display format of the hexadecimal indicator; You can do this by clicking the indicator and click the display format.

  

  You can use this idea when you create a custom probe. Make sure you select 'New'... custom probe (and select new probe). This will create a vi with a panel front and block diagram. You could create a custom probe that does the same thing as this indicator.

  I hope this helps.

• Creating a custom for the current scale

  Hi guys,.

  I need help in the creation of a custom scale. I read motor current (analog I / P) and I want to show that on a chart and write it to a file. I need to use a linear scaling for custom scale. The slope is 2 and the intersection point is 0. I have attached the code to clearly indicate what I'm currently building. The way I put up right now, it's not the scaling. It has 2 spots in the code. I would like to create a custom for the first task, as in the attached code scale. I had a scale customized using VI to Express DAQ Assistant. But I do not see these options when I try to do the same with the DAQmx task. Please let me know how this can be done. Any help is greatly appreciated.

  Thank you

  REDA

  Ah.

  on the pallate DAQmx > advanced > the balance settings

  There is a scale property node and "Create Scale.vi"

• organize images in the form of grid

  Hello

  How to organize images in the form of grid as a form of the matrix 2 x 2.

  any solution please.

  Kind regards

  Hari

  Thinnker,

  I'm not sure I understand what you're trying to do, but I have modified what I could from your code to make it work without changing the structure so that it become unrecognizable to you.

  I've replaced your IMAQ control with control of 2D image, because I have not installed IMAQ. This VI works as expected and load your file of jpg files in the table of the photo.

  If you work with IMAQ, note that your images will be loaded all into the same reference IMAQ because you create only one (called untitled), so with each image you load, you override the earlier. You must move the IMAQ Create function in the loop For and generate a new reference for each image you want to load (each requires a unique string for its name).

• Hey.Can someone tell me the best setting of the equalizer custom on the "rocket"?

  Im trying to do the quality of the sound of my "rocket" at its optimum level if someone can tell me the best setting of the equalizer custom on the "rocket"? Even if this is not the best can someone tell me what is their custom Equalizer setting?

  any help would be greatly appreciated.

  SR - rox wrote:

  WOW I didn't know custom Equalizer sucked upwards of battery most. I use a set of earbud headphones(not_sure_of_the_model_name).well sansa if you change your song to a slow, you need to change the eq to a slow to get the best result in law?, but it is really tiring to do over and over again? or is there another method?

  Thanks a lot for your answer.

  SR - rox

  No, the speed of the song has nothing to do with the equalizer. The EQ is on the sound, not the speed. Experiment a bit with the presets and you can understand a little better.

  P.S. I wouldn't trade away normal EQ as long as you use the Sansa earphones... they are OK but only capable of so much

• The fonts using custom with the NDK

  Hello. I develop a simple game with the NDK and would like to know if anyone knows how I can load a police custom in the playbook in my game. I tried to copy it with the rest of the resources and charging from there, but when I try to load the font with the "FT_New_Face" function, I get an error and the error code returned is 1. I tried with different fonts (ttf and OTF) and the result is always the same. Anyone know how I can solve this problem, or even if it is possible? Thank you.

  I found the problem on my end, typo. The path must contain no attack "/":

  "app/native/BILLH___.TTF"
  

  Scott

• Location of the custom in the filesystem MX200 background image

  Hello

  I'm having a problem of downloading an image personalized to a MX200 TC6.1.1 running. I have a pc with access to this MX200, but the browser is not compatible, so I'm unable to download the image custom through the web interface. I'm looking for the file where I can transfer the file png via winscp and then run a command via SSH to use the custom image. I found a site that has the background images, but it is read-only and I do not think it is the right one. Any help is appreciated.

  Thank you!

  I have not and MX200, but I checked on my EX60, wallpaper, I just downloaded is located in:

  posters/user /.

  Despite what he called on my computer, it has been renamed simply "wallpaper".  If you do not already know the command to change the wallpaper you want will be:

  xConfiguration video wallpaper: Custom.

  It will be useful.

  Patrick

• Custom in the ALX files properties

  Hello

  in fact I deploy my application OTA. I added some special parameters in the JAD file to configure the application before it is downloaded to the device. Using the CodeModuleGroupManager I can then read properties and use them in my application.

  Now, I have received the request to deploy my application using Blackberry Enterprise Manager. The administrator has informed me, he uses an ALX file to install the application on the device. Now, my problem is that the additional settings to configure my application are no longer there (it is not possible to install the jad with alx files). Is it possible to add custom in the alx file properties? Or y at - it another way to do with BES?

  Thanks for your help,

  Lars

  Take a look at BES Admin Manual. On the side of the unit, you can query the TI custom policy settings using the ITPolicy class.

• 12.2 EBS on CARS; Do I need to install the infrastructure of grid on the applications node?

  I have my cluster of 2 nodes running without any problem.

  I do the rapidwiz for applications and then when it got to the point where say you, it's what you want put on some RAC nodes, when I clicked on the button

  It gave me an error about how it has not found the RAC nodes in an .xml file.

  Is it because you have to have the infrastructure installed grid and back up and running for applications to be able to search the RAC nodes?

  Also, do I need to configure the grid Infrastructure on the node applications in some way?

  
  

  I found several guides on how to do it, but I'm running into some different questions.

  Thank you

  Lady Allora.

  Hello

  Yes, you need to have PAP/GRID services i.e., CRS, CSS etc. must be running.

  When you select CARS as installation on screen rapidwiz, it prompts you for the nodes on which RAC services are running.

  If you have 2 node RAC, it will list the 2 nodes and you will need to select them for your installation.

  It is not that I know of any special configuration required.

  Kind regards

  Hugues

• What is the name of the table that has the name of the custom in the Oracle database Section?

  What is the name of the table that has the name of the custom in the Oracle database Section?

  Thank you

  Nefertari

  The names of the custom Sections are stored in commonExtendedAttributeML, the extended attribute table.

• AutoVue Office: syntax to specify a file of .gui custom in the .properties files

  Hello.

  My company must specify a menu custom for some users.

  We do not use the client desktop application built-in but Autovue

  It is possible to specify a custom file 'users.gui' in a property like 'autovue.properties' file, in order to distribute tho files on already installed customers.

  If I ' am on the wrong means to tell me.

  Thanks in advance

  Hello

  When you use AutoVue Desktop Deployment, you can specify the GUI file customized in the autovue.properties file by using this option:

  param - GUIFILE = mynewguifile.gui

  It should be added to autovue.cmdline.

  Also the new GUI file should be in your folder "\bin\Profiles".

  Thank you

  Daniel

• Add custom in the analytical center of the lines of obiee11g lines

  Hello

  I want to add custom table lines. Only lines custom placed after the specified lines, based on requirements.

  In the screenshot, lines custom here is sum (1 + 2 + 3), sum(4+5), sum (6 + 7 + 8)

  

  To do this, I created RPD and exported in Ms.

  I have the analytic choice to create the report.

  To add lines custom, I choose Add custom calculated item.

  I tried. But I have no way out.

  Please see the screenshots

  

  

  

  See the output

  

  Please help me. I couldn't place the lines custom after the specified lines.

  Thnaks in advance,

  Bruno has.

  Make 1 more column for Prod_ID and then use fx of expression to sort values Prod_ID using the Case statement.

  using PivotTable the aggregate value or icon of sigma to sum up the values.