Custom iPad OS Pro and more 3rd Party Vendor involvement - Apple should do a

Similar Questions

• I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  find it hard to imagine that Apple could sell these defective products.

  If the seller is an authorized Apple reseller, an independent company,

  You may need to ask you if you could see & try a different product sample

  because you might be looking at something that has a defect.

  {According to the related help page, Type position should be more

  stable to use. However if the keyboard is not flat, this sounds like default.}

  Sounds as if you're not at the official Apple Store (apple retailer)

  but, on the contrary, are somewhere else. Could you give more information?

  Some keyboard accessories are made by third party companies; so

  If the product has an Apple product model number, we note here.

  When considering the purchase of an accessory, it's a good idea to test

  and check in the store before you buy. An official Apple Store has

  a different return policy as an independent reseller of Apple.

  Don't know if I can be useful; These chat rooms are usually Apple

  users of products such as yourself, who have taken their unpaid time

  to see if they can help the other users of the product.

  Good luck...!

• Problem with WLC and a 3rd-party NMS SNMP AP Assoc/cancellation interruption

  Hello

  I'm troubleshooting an issue, why our NMS is not able to automatically clear an alarm generated trap of an AP that has been separated and is associated with again.

  When debugging on the WLC snmp trap generation, I discovered that when the AP disassociates the WLC sends the trap of bsnAPDisassociated , which is perfectly defined and I can also find in the SNMP Object Navigator. However when the AP reassociates again the WLC sends the ciscoLwappApAssociatedtrap.

  Part 3 NMS is not able to understand it, but our WCS system does, that's why I then took a peek in the MIB file installed.

  I discovered that ciscoLwappApAssociated is a sheet of ciscoLwappApMIBNotifs (1.3.6.1.4.1.9.9.513.0. 4), which I have neither

  Cannot be found in the Cisco SNMP Object Navigator or the downloadable MIB.

  As the MIB in the WCS is a XML file I didn't how to get information in the 3rd-party NMS.

  Anyone have any idea on how to solve this problem or there at - it update CISCO-LWAPP-AP-MIB available somewhere?

  Our WLCs are running the latest version of the software (7.0.116.0) as well as our WCS (7.0.172.0)

  Thanks in advance!

  Kind regards

  Patrick

  Such discrepancies sometimes occur. Best is a matter of TAC in order to tackle the problem through a bug or have a new MIB published on cisco.com if necessary

• Want to sell my macbook pro and to buy a new one, what should I do to remove my cloud of mac license? [was: deavtivate]

  I want to sell my macbook pro and buying a new, what should I do to remove my license to mac? I have PS with the creative cloud

  Enable and disable Adobe products

• HP Photosmart 5515 stopped working with our iPad, MacBook Pro and Dell

  On the (Windows 7) Dell printer is called but says unable to communicate with the printer. On the MacBook Pro (OSX 10.8.3) it says no selected printer and I am unable to add a. It says no printer air found on the iPad. On the printer, the status of the network is ready and the wireless status is connected. The printer worked perfectly, but suddenly stopped 2 days ago. Help!

  On the machine Windows 7 running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

  I recommend that you check the network connection and make sure that it is connected to your network, these days, that it is not rare that the wifi to a neighbor to be picked up by the printer.

• Need HELP creating DVD Premiere Pro and MORE

  Hi everyone - please be gentle. IM new to this. I had a concert filmed using 3 cameras (Panasonic GH4 at 1080 p 24 frames per second and 2 GH2s 23.976 fps.) I am learning to cut pro first. I was doing so good, I used the multicam editing tool to create the different angles and have now a full HD version has exported for viewing online using the high-speed youtube HD preset encoding. My problem is to get the movie on a DVD SD to send to loved ones. I created with success of the menus to DVD etc. Yet and these work as they should and created a chronology of 25 fps and exported 720 x 576 PAL Mpeg2 for DVD SD widescreen. The film seems perfect, but with a little more motion blur, but I have done wrong to something else... The resolution does not. When I play the video when there is boxing on the sides and the top letter played on my dvd player and played on a disc hard tv.  It is, what do I do to get the pictures to fill the screen or the less simply having everything boxing letter up and down? Thank you much for the help.

  So I have a timeline-edited, but I now want to export to fill the screen when played on DVD. What should I do?   IM so confused now...

  Thank you all.

  Sincerely, Jay.

  When you export your MPEG2-DVD of body, use the "Scale to fill" option (or perhaps the scale to adapt... not in yet, so don't remember the exact name of the option)

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn

• Photosmart HP 5510 B111a-printing of Ipads, host names and more!

  Hello

  I have 5 of these photosmart printers installation in various places around our school to allow printing of the iPad 2 that have been deployed to classrooms.

  The problem is it seems to be a way to identify the different printers on the network when printing of you ipads. When I click on print and then select a printer list shows "PHOTOSMART HP 5510 B111a [C95...

  The [C95 corresponds to the first three digits of the host name of the printer, the problem is that three out of five printers have the same first three digits and are all the same displayed as the example above and therefore gives no idea of what printer you select until you print.] Which is not very practical in a school of our size!

  I connected to the HP configuration page using the IP address and changed the host name, but it changed only on windows-based hardware.

  So my question is: is it possible to change the name of the printer to allow me to determine what printer I print from an iPad? If this isn't the case, any other solution would be great.

  Hello

  You can change the identification of the unit of the printer, following embedded Web server:

  1. Access SAP from your browser by using the IP address of the printer.
  2. Enter the network tab.
  3. Enter the network.
  4. Enter Hello.
  5. Change the Name of Service Hello , as required, the updated name will appear on any Apple device.
  6. Click apply to save the changes.

  Kind regards

  Shlomi

• Why can't I add more 3rd party widgets for Muse?

  Muse to update a few days ago, and now all the widgets from my Muse-themes are gone. The Add button which is normally located at the bottom of the library Widget Panel is gone. Anyone know why this is?

  Library of Muse option should be there in the import library panel. Try to create a library of page elements, and then re - check in the library panel, if you see same behaviour post some screenshots of the fashion design library panel.

  Thank you

  Sanjit

• First card plugin folder Pro 2014 (for 3rd party plugins)

  I am trying to install a video plugin for first, and their setup program asks for the location of the plug-in folder.  When I choose a location (say/Library/Application Support / Adobe / Plug - Ins), their installer places an alias to this place.  First does not seem to use this location as the "Plug-in" folder, like video Neat plugin is not found in the effects.  So where should I point the installer?

  Thank you

  -Tony

  I got it.  In my folder/Library/Application Support / Adobe / Common, I manually create 3 folders "Plug-ins/7.0/MediaCore" and put the alias in MediaCore.  Now, I can access the plugin in first.  Must have been a problem during installation or first dissemination of first CC 2014.

• content library for Adobe Creative Suite - for Premiere Pro and more. Use content CS6?

  Can I use the installer and CS6 download and apply it to my CS5 programs?

  Thank you!

  The basic content is an installer, so I want to say 'no '. t, but I do not know what he would actually do if CS6 is not installed. But the functional content Installer CS6 (for PR and FR) REMOVES the CS5.5 Encore library. Go figure.

  It's true some time ago, and I have not heard that it has been fixed.

  If the process will try and see if the content can be uncompressed. In the end, it is simply content in folders.

  For models library complete still and buttons etc, you can simply expand the compressed file and use it in CS5.

• UP2516D, 3rd party vendor, backlight problem

  Hi all

  I just bought a UP2516D in a UK online store. I started to experiment, and I noticed that when I content black on the screen there is an abnormal amount of light coming from the lower part of the monitor. I took the following photos in a bright environment dark and normal. Do you think that there is nothing that can be done? I could ask for a replacement, but I want to keep it as last chance if possible. Thanks in advance.

  

  For me, I could not justify an Exchange. I'm in the USA. Maybe UK Support technical opinion will be different. Or, if you are inside the first 30 days of the date of purchase by the dealer, contact them and see if they will be assigned a customer exchange for reasons of "satisfaction".

• Can I migrate my 3rd party applications on my mac pro with a new IMac with El Capitan Lion?

  I have many obsolete applications (Final Cut Pro 7 etc.) and applications 3rd party (Ms Office, final version of the project, etc.).  Can I move ALL of my external hard drive, which is a carbon copy of transfer cleaner everything on my mac pro?

  Yes, but they may be too old to work with El Capitan.  Look at RoaringApps.com to see if there is any inconsistency with these applications.

  

• BlackBerry smartphones running 3rd party on memory card applications?

  Just got my "BOLD" and started 3rd party download applications. They download fine, but during the installation I am not invited if I want to download to media card!  You want to tell me that the media card is ONLY for photos, video and music files?  I can not load or run applications on my press card?

  Also, as I can see all the files of Desktop Manager, is there any type of file on the "BOLD" Explorer to see the files on my card?

  alfredjr wrote:

  the media card is ONLY for photos, video and music files?  I can not load or run applications on my press card?

  Correct as indicated. You cannot load the applications to run the press card.

  alfredjr wrote:

  Also, as I can see all the files of Desktop Manager, is there any type of file on the "BOLD" Explorer to see the files on my card?

  You can open your media icon > menu > look for a go.

  If you want advanced utlities filemanager, look among the many applications of third party file manager:

  http://www.blackberrynews.com/2009/02/02/File-Manager-Pro-eases-your-BlackBerry-file-utility-Blues/

• Standard e-mail client e-mail program 3rd - party

  Hello
  I'm working on a Danish high school, and I need to use a program e-mail - and conference 3rd party as my standard e-mail client. The customer is first class.
  When I install it and recognize the brand as standard e-mail client, Windows 7 does´nt, and when you click on a mailto link: in Explorer, it pops up with a message saying do not install Client standard fix.
  I tried to change the standard programs, but only Windows software pops up there and I can´t get my 3rd. client left to appear.
  How can I solve this problem?

  Hello
  I'm working on a Danish high school, and I need to use a program e-mail - and conference 3rd party as my standard e-mail client. The customer is first class.
  When I install it and recognize the brand as standard e-mail client, Windows 7 does´nt, and when you click on a mailto link: in Explorer, it pops up with a message saying do not install Client standard fix.
  I tried to change the standard programs, but only Windows software pops up there and I can´t get my 3rd. client left to appear.
  How can I solve this problem?

  Do you mean that you are faced with RM? Everyone in Britain said they are TERRIBLE. My compassion.

  I guess that is not compatible with Windows 7. Have you asked at RM about it? If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Is there a way to restore my deleted programs 3rd party after a refresh?

  I have an Acer 5750.  I have recently upgraded to windows 7 to windows 8.

  Initially, there is no problem, but after a very large update system would not open.  I had to do a refresh and my 3rd party programs, including a large number of my drivers have been deleted (even if the information was left on my laptop).  Some of the programs were very expensive (e.g., SPSS, MicrosoftOffice 2010).  I can reinstall some of the discs, but I can't find not all relevant records for all relevant programs.
  Is it possible to reinstall programs information remains on my laptop?

  I have an Acer 5750.  I have recently upgraded to windows 7 to windows 8.

  Initially, there is no problem, but after a very large update system would not open.  I had to do a refresh and my 3rd party programs, including a large number of my drivers have been deleted (even if the information was left on my laptop).  Some of the programs were very expensive (e.g., SPSS, MicrosoftOffice 2010).  I can reinstall some of the discs, but I can't find not all relevant records for all relevant programs.

  Is it possible to reinstall programs information remains on my laptop?

  Hello

  You will need to reinstall any missing applications using the same procedure that you used originally to install.

  It is recommended, after installation of Windows 8 and all your other Apps, that you create a custom Refresh Image.

  When you do so, the Image of custom refresh will be used whenever you refresh the computer and you will not lose all programs/software applications you have installed manually.

  To create a custom Refresh Image, perform the following steps.

  Important: Quit all running programs. If you are using a portable computer, plug the power adapter while you create the image.

  1. press the Windows key + X to display the System menu and select the command (Admin) prompt.

  2 in the command window, type the following command.

  recimg.exe /createimage C:\RecoveryImage

  Press enter.

  (Note the 2 spaces in the command)

  The process of creating displays 4 steps.

  Initialization - 100%

  Creating snapshot - 100%

  A picture writing - 100%

  Saving Image - 100%

  Note: The writing stage will not start immediately and will take about 30-45 minutes to complete, the other 3 stages are very fast.

  Once the command has completed, open Windows Explorer and navigate to the C:\RecoveryImage folder. You should see a file named CustomRefresh.wim.

  It is recommended to create an image of custom occasionally refresh to update changes made to the computer.

  Source:

  Refresh and reset your PC - Building Windows 8:

  http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspx

  Concerning