Custom Logging Codes and Messages database options

I use TestStand 4.5 with the provided standard SQL database schema. I noticed that in the table UUT_RESULT the only time where what a UUT_ERROR_CODE or a UUT_ERROR_MESSAGE is written is when the UUT_STATUS is error. I would like to be able to connect our custom FileGlobals.Error_code and FileGlobals.Error_text in these fields when the UUT fails a test.

I'm rather not change the schema but just get help on how to get my global variables in the correct fields.

Thanks in advance.




To accomplish what you're trying to do, IE. the value of the message and the error code USE without updating the database schema, you would have to change the entry points for Single Pass and Test UUT for patterns that you use. You must add a step after the MainSequence called step that evaluates if the call to MainSequence failed and if that were the case, change the last result placed in the Locals.ResultList table. You must set the Locals.ResultList [x]. Error.Code and Locals.ResultList [0]. Error.Msg properties on this result for the global values you mentioned. If overall file values in the template file, then this is an easy task. If the global file value is in the customer file or another file, you will need succeed somehow to the entry point. Many options: store values in station model and global entry point will recover, have value assign customer at the local level in the point of entry using expression as RunState.Root.Locals... or create temporary properties on Execution.RunTimeVariables that contains the model entry point access determine if exists and pull values of. You will need to make sure that the previous values are disabled before the next USE. I hope this helps...

Tags: NI Software

Similar Questions

  • How to simplify the code to generate custom error codes and messages

    I designed a vi that generates the error when any data entry is missing, it works correctly, but the problem is that I want to simplify, because it is part of the main program and its block diagram is great to use as such (I tried to use this vi as a Subvi in the main program, but that does not work correctly) so I need help to simplify the code or if there is no other better medium to generate the error message.


    As shown in the previous example, to a different question of yours, it is always good to reduce with diagrams of huge block with repeated code.

    When you overwrite functionality even repeated several times, put it in a loop and run it to have recurrences of 4 or 5 of the same code.

    It will be evolving in the future.

    joined the vi changed for you.

    Note: when you want to simplify your program, isolate your code in functions, put each function inside a under vi.

    in your case, you can have the control to an empty string for all channels within a Subvi. build an array of strings and go through the subvi. Control in the sub that VI is that strings are empty.

    an array of Boolean output error. build your error string in another under vi. the wires together.

  • Range of custom error codes and error rings/Labview 2013 SP1


    for the error message personalized codes there are these assigned ranges:
    5000 to 9999
    500 000 to 599 999

    If I create an "error ring" in Labview 2013 SP1, then I am able to choose predefined error codes or I can put in some custom error codes. Curious as I was I chose 'Labview' in the menu drop down and looked up some error codes. I noticed that there are some affected error codes that are of the order of custom error codes (see attachment) of 538170 to 538193.

    Is this a bug or feature? What is the impact if I defined error codes customized with identical, already existing error codes?

    Kind regards



    It seems you have installed ModBus library. As it is an additional package, picking "custom error codes" is not bad even if the library fits in LV...


  • Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

    I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:


    and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

    PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

    I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

    Thank you very much!

    Try this to save your data:

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:


    Download/save the file Knoppix Live CD ISO above.


    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.
    Mick Murphy - Microsoft partner

  • My laptop and my iPad give me the access code and no other options

    I had already downloaded firefox home on my laptop and my iPad. After some problems with the app on my iPad, I decided to remove the app on my iPad and reinstall it. I did not remove the app on my phone.
    I downloaded the app on my iPad now and try to add as a new device.

    After you select 'I already have a sync account', on my laptop and iPad, both devices are give me an access code and tell me to come in on the other device. I don't give me no other options.

    I'm obviously something wrong, can you please tell me what.

    Thank you

    Hi nzluke,

    Then you previously installed sync successfully on your laptop? You may need to redefine your account and for this you will need your recovery key and the following steps

    If you do not have the recovery key, your only option is to reset the recovery key. To do this, follow these simple instructions:

    1. Click on «Set up Firefox Sync»
    2. Click on 'Connect' as I already have an account.
    3. In this window, forget the code and click on 'I don't have the camera with me' right underneath the 3 boxes.
    4. In this window, under the 'Sync key' field, there is a paragraph with a link to the end. "I lost my other device."
    5. Click on it and follow the instructions. In the end, you'll be ready to go. Just reset your Firefox Home app and that's all.

    Hope this helps!

  • View the log files and message tracking

    Just our ES3300 running. Looked through the Administrator's guide and searched a bit, is there not another way to view a log of what happened through the system of having to download log files?

    Message tracking would be done in the audit.

    Is not necessary to download and browse through the newspapers unless your train to solve a problem.

  • Code and the database tables in different schemas

    My version of db: database Oracle 11 g Enterprise Edition Release - 64 bit Production

    I would like to understand the advantages and disadvantages of the following situation:
    We have only one request.
    The design of the db for this application has 44 paintings, of which 28 are base tables related by PK and FK relations. The other 16 are look upward and refer to tables that are not related to one.
    The team has decided to place the tables in a diagram 28 A and the other 16 in another schema B within the same database. (The reason for this is... because it's done in other projects to do it here too).
    Coming now to the code (stored procedures, functions, packages, etc.). Teams want to ask most of the code in the diagram B with the Ref 16 tables. (the reason being again the same).
    What are the advantages and disadvantages this?
    Please advice.

    I have googled and find something on these lines:
    o harder to manage
    o harder to upgrade
    o harder to patch
    o harder to maintain
    o causes your shared pool size to increase 1,000 times (shared sql goes down the tubes)
    o takes more space
    o queries against the dictionary will be impacted
    o latching on the shared pool goes WAY up (latching = locks = serialization device = 
    slows you down)
    o none that I can think of.

    From my experience, if you see natural divisions that give you smaller patterns, well contained, you should take advantage of them and start with separate schemas. If done correctly, it can greatly improve the maintainability of your application.

    Assume that your initial project will have 60 paintings and they might fall into three groups of 15, 20 and 25 tables respectively. There are also objects of code such as PL/SQL packages. Your choice is:
    -Use a single scheme of 60 paintings, suppose that with 100 objects in code.
    -Use 3 diagrams divided as described. The total code objects will probably be a little more that unique schema design, because they need to provide interfaces with others. So let's assume that schemas will have 30, 40 and 50 code objects each.

    Now, wait 3 years.

    The history of single-schema:
    -The single-schema is passed to 120 tables. There has been a corresponding increase in code, now more than 200 objects. But they are very complex. Over time, each piece of code will interact with the tables more and more and many other objects in code.
    -You (the architect or Manager) can not really apply any internal for this structure since no subsidy is required to add dependencies. Therefore, if you change a table there is a vast impact.
    -You can easily divide the responsibilities because everything affects everything else. You can't manage simultaneous development efforts because the impact widespread changes cause the same tables/components to be affected by multiple projects. If you have the project execution dependencies / as you have interdependencies technique/code.
    -You have a "big ball of mud" and it is very difficult to get out of this situation.

    Multi-schema history:
    -Each of the 3 original patterns has grown, but some more than others. A fourth was added a year ago, when there was a major expansion in a new district, as a result of "natural divisions.
    -On the inside of each of these schemas, it is always a challenge to impose internal structure. But those patterns more smaller and therefore more small problems.
    -Through schemes, subsidies are necessary to allow interaction, this is not a "wild west" where everyone can access everything (and introduce dependencies on everything). Teams to define interfaces (packages or the views that are specifically intended to be interface points) where the interactions with other scehmas are necessary.
    -If changes to a table are needed, the impact can be limited to the schema that contains naturally. You know that no one else has created dependencies at this table, because you were never issued grants on this.
    -The responsibility for these schemas was divided between 2 teams, each team having full responsibility for its 2 diagrams.
    -Teams can complete projects much more easily, even with a parallel development, because there is less than a "domino effect" with each change.

    Now, these benefits depend on "natural divisions that give you the diagrams smaller, well contained." If you make the wrong choice here, you will always have a mess. You design with the end in mind scenario.

  • I entered the Redemption Code and message says page not found for photoshop

    Unable to install Photoshop. It says 'Page not found '.


    Please visit to use the code for Photoshop Creative Cloud.

    See also the article:

    Please write if it helps.

    Kind regards


  • test of the formatting codes and messages

    lets see whether this worked                                                                                                                                                                                                                            

    When you type:




    It appears that:


    When you post the it.
    Just put the {noformat

    {noformat} tag before and after the text you want to post formatted and/or indented.
  • I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

    I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

    See this previous thread on the problem: en - US & q = + site: + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

    Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

    Good luck!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • get the error code 66A message, what to do and how to fix it?

    get the error code 66A message, what to do and how to fix it?


    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    Also, try to put the KB numbers in the search on the link below and then manually download the

    or repost in the correct windows update forum

  • Smartphones blackBerry email settings AND Message option Services



    I have my BB Storm connected to my outlook (aka my work email) and two 1) to gmail and 2) MSN personal e-mail accounts. And on the screen of the main menu of my blackberry, I have three icons labeled as:

    Messages (outlook), Messages (gmail account) and Messages (MSN account)

    But what is a little irritating, it's that the emails sent from Outlook (running on my PC at work) to my Gmail or my MSN account, ALL themselves in my icon of Messages (outlook) on my BB Storm. I put the 'Save copy in sent folder' to no.


    In addition, I can't understand the purpose of the drop-down list "Messsage Services". There are three items in the list:

    (1) Desktpo 2) my MSN address email and 3) my gmail address. I know that when I select MSN or gmail as the 'Message Services' the available options for change. But the global options? or are they specific to the 'message service "I chose?".

    I hope I am clear. I could not find much support DOCs or on the BB site.

    Thank you


    Hello and welcome to the Forums of Support

    1. your key messages folder will get all THE electronic, all. We cannot dissociate the BIS personal mail out, but you can BES email (work) to help empower BES Inbox. Google for more information.

    2. the "office" is your work email. The options change whether you use your work email account or accounts of the persona that the first is BES and the last two are BIS accounts who have options and different functions.

  • When you try to download my code, and the series only. There is an option to use a 24-bit or a 64-bit format. Apparently I choose evil, but I can't go home to change.   How can I clear it so I can continue the download process

    When you try to download my code and serial No., there is an option to use a 24-bit or a 64-bit format. APPARENTLY, I GOT ONE WRONG, but I can't go back to this page to change this option. It is a question...

    Do you mean 32-bit or 64-bit?

    What version number and program?

    Download & install instructions can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help

    Also go to

    - and also read

  • I need to activate my membership creative cloud on my second computer but I get a message telling me that I have already installed on 2 computers, which I did not, and the only option it gives me is to uninstall all my computers, which I'm read again

    That I need to activate my membership creative cloud on my second computer but I get a message telling me that I have already installed on 2 computers, which I did not, and the only option it gives me is to uninstall all of my computers, I am reluctant to do because it works on my main computer (MacBook Pro) and I don't want to ruin that.  How to install on my desktop (iMac) counter without uninstalling on my another computer first?  My subscription tell me I can have it installed on 2 computers!

    that option is not to uninstall, it is disconnected.

    Click Yes and disconnect all others.  then you can connect on the one you want.

    and when you start a program adobe on your other program will give you the option to connect.

    end of the number.

  • Dreamweaver CS6 how can I automatically indent the code? I've already put the presets and the codeview options, but it does not work.

    Dreamweaver CS6 how can I automatically indent the code? I've already put the presets and the codeview options, but it does not work. Thanks for advice

    Commands > apply Source format.

    I use it so often, I created a shortcut to it.

    Nancy O.

Maybe you are looking for