custom / probe 8.2 LV default

Hi all

I recently built myself a probe custom by right-clicking on a channel by creating a new probe, giving it a name and registering it under the directory Labview/probes.  However when I click with the right button on a channel and select probe (I'm eager to probe small default box) I rather get my custom automatically.  I want to access that by default all the time, but rather keep getting my custom!  Surely if I want my custom I will choose the probe-> custom-> mycustomProbe probes.  Does anyone know how to cancel it?

Thanks in advance

Craig

Hi Craig,.

I always get the last custom probe used. You must select probe custom, then the standard probe. The next time you select probe you should get the last used one (in this case--> std).

It will be useful.

Mike

Tags: NI Software

Similar Questions

  • ActiveX refnum probe custom in the numeric form

    Hi all

    OK this can be simple or impossible, but I can't understand it.

    When you explore a thread of refnum ActiveX on the diagram, it shows a unique number (or 0 if its not valid).  This is useful if the refnum changes (like walking through an XML using DOMDocument)

    However when I tried to make a customized probe, the probe is refnum control icon if you do not see a number.  This doesn't help me.  I tried to change this control in the custom to a digital probe, but it breaks.  (in fact when I tried to use a table as the probe custom LV2010 for a table of refnum, it gave me a message about incompatible type and then it crashed)

    Is there a way to show the number of the refnum in a custom probe?  I guess it would be the same as showing the number instead of the control in a regular front diagram, so maybe he has to be separated first, but how the probe simple builtin it do?

    On a side note, using the window spy Probe, 1 d or 2D tables, the probe display just a single element.  Is there a way to expand the table to display more than 1 item in this window? All values on the left side in a single line, but with 2D especially tables it's hard to see where the next column starts.

    Thanks for your help.

    TS9,

    Please refer to the following Knowledge Base when you attempt to display a value of refnum in labview. Using type cast to U32 I could extract the refnum and the output of an indicator number using the following code. I had to make the display format of the hexadecimal indicator; You can do this by clicking the indicator and click the display format.

    You can use this idea when you create a custom probe. Make sure you select 'New'... custom probe (and select new probe). This will create a vi with a panel front and block diagram. You could create a custom probe that does the same thing as this indicator.

    I hope this helps.

  • Can I set a profile of preflight custom as my default?

    The preflight profile base in InDesign doesn't grab text and boxes in RGB, so I put in place a custom profile that makes. I still need this checked, if I prefer my custom profile to be my default when I open any InDesign document. Is there a way to do this?

    Much obliged for the answers.

    SoC

    Well Yes, just open the preflight Panel. Access the flyout to panel´s and select the preflight Options and change your working profile...

  • Conditional probes

    Hi all

    I was hoping I might be able to get a little help with conditional LabVIEW probes in 2015.  My understanding about the conditional probes, it's that I would have to option to create a conditional probe for the data type of the thread I'm probe by going to the menu "Custom probe.  As in if I right click on a cluster of error thread I should be able to right click-Online Custom Probe-online conditional error probe.  My problem is that no option is there when I go to "Custom Probe".  I have only options for the 'Orders' and 'new '.... ».  Anyone can do the light as to where I could get the parameter to include conditional probes in my menu custom default probe?

    Thank you very much!

    Ian

    Thanks for the iniput, I worked in fact just the solution myself.  If someone else falls on a problem similar to the problem with my 'LabVIEW data' folder having appeared in a place that does not exist.  So LabVIEW was not load default probes in the folder _Probes on the inside, and they were not to appear.  The solution was to go options and point the 'default data directory"to an existing location and repair of LabVIEW.  Specifically, you need to change the data directory before repairing, or you'll end up sitting and waiting for LabVIEW to repair for nothing... maybe I did several times... Oops!

  • Zero window probe

    Hi all

    I saw zero Windows Probe events and its default action says 'change the package '. Please let me know what will be the exact action taken by IPS that I need to understand it perfectly. Please guide me.

    Concerning

    Kiran

    Hello Kiran,

    The action to modify the package signature line 1317.0 removes the package data probe Zero Window.

    RFC 793/1122 allow no data 1 byte of data or even a package of comprehensive data in Zero-Window probe.  If the window opens while the package is in transit, the receiving end can accept data. As the IPS has no way of knowing if the data will be accepted on the receiving end or not, it deletes the data. The IPS force package as a legitimate zero window probe and remove possible ambiguity on what data have been processed. Zero window probes are not malicious. The signature exists as a way to control the behavior of the normalizer.  The behavior is necessary for the normalizer can maintain the proper workflow status.

    Disabling this signature can cause the normalizer of a false positive in the following scenario:

    Client server

    ------------------Syn>

    -------------------ACK>

    -ZeroWindow >

    -ZeroWindow >

    If the receive window opens while the ZWP package above is in flight, the customer accepts the packet normalizer will be ignored and the normalizer is out of sync with the data stream. The normalizer will begin to produce false alarms.

    If the signature 1317.0 is selected, all data will be removed from the ZeroWindowProbe and there is no potential ambiguity.

    Please let me know if I can help with anything whatsoever in addition under this thread. If your question has been answered, please mark the thread as such so that it is useful to other users. Also, feel free to note this thread to take account of your experience.

    Thank you

    Blayne Dreier

    Cisco TAC team climbing

    * Please see our Podcasts *.

    TAC security show: http://www.cisco.com/go/tacsecuritypodcast

    TAC IPS Media Series: https://supportforums.cisco.com/community/netpro/security/intrusion-prevention?view=tags&tags=tac_ips_media_series

  • "Turn off monitor" in the behavior of type custom step

    Hello!

    Currently in the drafting of the types of custom step based on sequences (default adapter of my type of step is a sequence), I would like to define the right ' off track ' in my step type definition.

    The problem is that this option is not visible in the "default Options" tab... " The only way I found to do this using pre and Post Expression to the value "ThisContext.Tracing = True False'."

    But I don't like using Expressions of pre/Post in my type of stage (I prefer to leave empty for end users).

    Is there a way to do this without the use of Expressions?

    Hi zyl7,

    In your type of custom step, set the property to TS. SData.Trace on 'Off' (without the quotes).

    I hope this helps.

    -Jack

  • How can I probe wire values within a class?

    Hi all

    I use a Modbus Library built using classes. I need to view the data inside a VI that is part of a class in a tree inheritance. I can't set a breakpoint in this class, or the sons of the probe or retain the yarn values. I looked into creating a custom probe, but the option is not available. I have read in several documents on LabVIEW classes and tried the built-in help also, but I don't know I'm missing something obvious. Please could someone point me to the right resource to use, or tell me what I'm doing wrong.

    Thank you

    Ray

    Tarsel wrote:

    Hi Gregory

    If the program or running or not, I can normally do a right-click on a wire and probe option is available. In this case, the option is grayed out or non-visible (even for breaking points). [...]
    Ray

    This indicates that the VI is set to "Enable debugging" = False (disabled).

    Norbert

  • How can I change the default setting in Outlook Express?

    I'm not under Explorer anymore and when I try to click on a link in an e-mail message by using Outlook Express, he tries to throw in Solution Explorer. How can I change this?

    Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Choose a default browser. Select the option for the browser you are using.

  • LaserJet 1020: Custom page size that partially prints

    I have a number of Word documents that I customized the size. All this allows to print ok before the upgrade to windows 10. (I just used to cut the paper down set the charger on the printer & print or I used before paper-cutting).  I tried to do it today & I get only partially printed on the page. The printer works fine if not a custom paper size.

    Please help - I've tried everything I can thing including the abolition of the printer, restart your computer, plug in the printer and windows reinstalled automatically.

    Hey @Patbrew, welcome to the Forums of HP! I'd love to help you with the paper size of your client

    Please follow the following steps and let me know the results of your efforts.

    Step 1: Create the new custom paper size

    To set the new custom paper size, create the new size of the printer software.

    1. Go to the control panel and open devices and printers, printers or printers and faxes.

    2. Click on your printer icon, and then click Properties in the print server.

      Figure: Location of the print server properties

      NOTE:

      If the properties of the print server does not appear, right click on an empty area in the Printers window, select run as administrator from the menu drop-down, then selectServer properties.

    3. If the user account control window opens, click on continue.

    4. On the Forms tab, select Create a new form check box, and then type a name for the new format of paper in the name of the form.

      Figure: Forms tab in the properties of the print server

      1. Create a new form

      2. Name of the form

    5. Select metric or English, and then type the dimensions for your custom paper in the width and height text boxes.

      Figure: Forms tab in the properties of the print server

      1. Metric or English

      2. Width and height

      NOTE:

      Let the printer area margins set at 0.00.

    6. Click on save the form, and then click OK or close.

    NOTE:

    Supported paper sizes vary depending on the printer. If you enter the dimensions custom that your printer does not support, the new custom paper size does not appear when you try to print. Check the specifications of the printer for your printer for more information on supported paper sizes.

    Step 2: Select the new format of custom in the printer software paper

    To begin to print on custom paper size, select the new size of the printer software.

    1. In the printers and devices window that you opened in the previous step, right-click on your printer icon, then selectPrinting preferences.

    2. On the paper/quality tab, click Advanced.

    3. In paper size, select the name of the new custom paper size.

      Figure: Paper size with the new selected custom paper size

    4. Click OK.

      The custom paper size is now default paper for all printing on your computer. You can change the default paper size back to the printing options and selecting the desired size.

    Source

    If this resolves the issue, please be sure to mark your post as solved by clicking on the accept button Solution below. If you need help let me know and I will do everything I can to help.

  • BlackBerry Smartphones WITH the STORM's MAJOR PROBLEM! -Custom ringtones are NOT vibrate or go silent

    According to the Guide to storm: "you can receive different notifications for incoming messages and calls from specific contacts or groups of contacts. Call and message notifications for your contacts are received even if you switch your sound profile silent or vibrate only. »

    In other words, if you are in a meeting and on vibrate or silent mode, the phone will ring always if a call is received by a contact with a custom ring tone.  It is a defect and design MAJOR, in my view, totally unacceptable.  On all other BBs, vibrate and silent mode apply to all calls/messages - even those with custom ringtones.  Why is different from the storm.  He made the custom meaningless since once assigned ringtones, they can never extinguish. so for BB users who regularly attend meetings beware!  Assign a custom ring tone will be a career limiting move.

    As a loyal BB user for 5 years and more, I humbly ask RIM to fix this ASAP!

    I guess that when I changed it to the volume of the active profile that it would float to the active profile, being far away when it is to vibrate or silent or normal.  That doesn't seem to be the case.  It would be more logical than sense, though.

    However, I made a temporary fix.  I created a custom profile I call silent default.  I put the ringtone in this profile to:

    Ringtone: Ringer_ClassicPhone

    Volumeilent

    LED: Normal setting

    Vibration: on

    This causes the vibration when one of the call of people custom ringtone.

  • Mapping VLAN and probe Inline

    Hello

    I'm doing all my traffic flow of SSL VPN clients through a traffic Inline probe. From what I see, I should use the mapping feature VLAN. But I can't understand how the function works. ASA not very informative or extensive documentation.

    Currently my ASA has a network of interconnection on a VLAN to my router base, and all my internal network is routed to the base IP address. Default gateway of the router of my Core is the ASA. My ASA provides IP addresses to remote VPN SSL clients and is the default router for them. Remote traffic follows the remote client to the ASA, then through the interconnection to my internal networks. My only ASA works as my perimeter firewall and SSL VPN concentrator.

    I have map VLAN undestand will make all traffic from the remote clients to abandon the vehicle on a VLAN individual. So, I created a new VLAN and that added to a trunk on the SAA. Then I activated "restrict access to VLAN" and set it to my VIRTUAL LAN. My traffic Inline probe is connected to the VLAN and can provide DHCP.

    If it were a classic network, I'd Inline traffic probe the gateway by default for this VLAN and provide IP addresses and gateway with its DHCP server. But how does it work with ASA? I can in captivity the evacuation to this VLAN, but cannot find a way to make the traffic passes through the screen. As ASA does not support routing based on the source can't make the jump next to the probe traffic.

    I can do the bridge of the probe (L2) network for interconnection and the remote client VLAN. But the IP address of the ASA on the VLAN does not fall within the same range as the interconnection, so I can't understand if and how it worked.

    Can someone help me with the configuration or explaing me better how works the mapping VLAN?

    Thank you.

    What you are trying to reach is configurable through the "tunnel" default route, and it would force all traffic of VPN with this default route special.

    for example:

    If your traffic probe Inline between the ASA inside your heart and the interface, you can configure:

    Route inside 0.0.0.0 0.0.0.0 in tunnel

    Requiring all VPN traffic route to IP CORE that would go through your online traffic probe

    Here's the order for your info reference:

    http://www.Cisco.com/en/us/docs/security/ASA/asa83/command/reference/QR.html#wp1840612

    Hope that helps.

  • I want to send an email manually with the fields email drives custom object? Is this possible?

    I want to send an email manually with the fields email drives custom object? Is this possible?

    Hey,.

    Yes, however, the object record Email custom fields only fill with default values. For the custom field object Record is filled, it must be sent via the event Actions or a generating program so that he knows in which case it is associated.

    Thank you...

  • Icon by default does not get replaced the device

    I build my app Gap telephone building (cli - 6.3.0), and I can't seem to get my custom icon to replace the default icon (stock cordova icon) appearing on the (android) device, once installed. My config.xml file contains the following entry:

    < src = "icon.png icon" / > "

    In my folder structure, the aforementioned icon.png is in my directory, and the file config.xml and index.html.

    I've read through previous discussions on the topic, as well as the docs of pit of phone, and I can't seem to determine the cause. All resolved issues seem to be related to issues that do not seem to apply to my case (incorrect folder structure, correspondence between the value name and the config directory, etc.).

    I should add that the icon "does" appear on the construction site...

    What should I do to my custom icon is displayed on an android device after installation, and not the default icon?

    Thanks in advance!

    What are all these icons in the part "android"? You seem to believe that you must declare all the icons/images that you use in your application. However, you are supposed to specify different densities app icons, only. These are the icons that appear on the home screen of the Android OS.

  • Applications and levels of under by default UI 5.6?'

    I thought that 5.6 would allow Applications and levels must be created in the default user interface or the custom user interface and then you can view the collection of either env?

    It seems that I can create a group of 'applications' in the default user interface, but not the application levels.  If I create a "pane App" group in default user interface and then create an 'app' group and try to associate the application layer to the app group, it won't let me.

    Also, if I create an application in the custom user interface is not visible as an application in the default user interface.

    -MattG

    It's the custom in the UI by default/vSphere groups are not related.  Your app in the custom user interface groups are not exposed in the user interface of vSphere.

  • Oracle UCM - metadata custom

    Hello

    Thank you for taking the time to read this, I'm pretty new with the Oracle Content Management System. I use 11G.

    I have a metadata field custom from which users select two options in a drop - down 'Yes' or 'No' - which is used by an archiver to determine whether this content is ready to be promoted to another server.

    Currently, I have this default value for the field of metadata to the option 'No' and when the user is done with the editing of their content, they change to 'Yes' and return to the question in the content server. This step causes an issue - from here out, the custom metadata field is always on 'Yes' by default whenever the content item is retrieved for editing, instead of 'No' which is how I like it. I understand that the default setting can relate only to the initial creation of the content, but I'm looking for a way to replace it.

    I tried to implement a Java component custom to solve this problem. In doing so, I have seen some progress using my custom Java code and the filter hook 'loadMetaDefaults' but this filter hook applies only when the metadata information are seen and not when contributors are only edit and resave (consignment) content.

    In essence, I am looking for information on the following:

    1. is it possible to do a metadata field custom specific back to its default value for a content item whenever the point is checked on the content server?

    2 If 1 is accomplished by the use of a custom component, which filter hooks (as appropriate) are executed whenever a content item is checked (not verified and archived).

    If the steps above are not possible, I think there is a way for the archiver process pass the field of metadata once it has run, however, I don't think not that this is an ideal solution.

    Thanks again for your time,

    Josh

    Hi Josh,.

    It is certainly possible meet your requirement. However, implementation may vary according to the few details. In fact, a similar request was recently described in another thread, see limiting access to metadata field for some people.

    In a Word,.

    -You can by default all metadata of any value on CheckIn (not on the Fund). IMHO you won't need a filter here, a global rule should be sufficient

    -as stated in the thread, you should consider the user experience. If the meaning is "ready to be promoted to another server", I assume that the right time to change the value would be the time when the promotion will run, wouldn't it? In fact, need you better a three-States-logic here: not ready - ready - promoted

    Jiri

Maybe you are looking for