Custom report for several Datastore latencies


I would like to create a report from the latancy VMware Storage model, but have the ability to account for the multiple datatstores. I need to create a new report template to do this, or do I have to create a Service with the data store and to report on this service?

The only option I seem to get a store of data one selection.

Thanks in advance.

Giles program

Hi Giles

You use WVE 7.1 or earlier? I remember that the VMware storage latency report could run for the storage of personal data.

From WVE 7.2, you should be able to run against all data warehouses. Keep in mind the report displays only with latency data warehouses.

WVE 7.2 should be available in a few weeks.

I hope this helps.


Tags: Dell Tech

Similar Questions

  • Need help in the development of different customized reports for SCCM 2012 using the Report Builder version 3.0

    Members of the Group of respected

    I need your urgent assistance to solve my problem, if someone who at least somewhat or large information please help me.
    My problem is related to SCCM 2012 and SQL server 2008.
    : - I have to develop a custom reports for SCCM 2012 for one of my clients. I have configured all the settings required for preparing the report, and I have examples of reports provided with sccm 2012.
    I get the problem while developing new relationships, if I have examples of reports that I have studied the corresponding reports. I don't get detailed information from the database to create query and get the desired result. As I have not idea of detail of this database structure in it.
    So I need help to create the query as I am new on this database.
    If anyone understand please give me help or link where I can build the report
    Thanks in advance.

    Forums for this product are here:

  • To find existing custom reports for a module

    Hi all

    We have a requirement in which we want to find the existing custom reports for a particular module.
    I would like to confirm will help the following query:

    SELECT annual doc_name, doc_developer_key, doc_folder_id
    DOC eul5_us.eul5_documents
    WHERE doc_name AS < workbook name >

    The 'eul5_documents' table also contains the data of standard reports. If this is the case what specific verification, I need to extract only the customized reports.

    Kind regards

    Hi shruti,

    find existing custom reports for a particular module.

    The query you've written works very well. But for particular module as you say, you add the fnd_responsibility to the query.
    If you want to ge the details of reports customized.

    There is no such thing of specific check to find custom reports.

    I hope this helps. More than problems let us know.

    Best wishes

  • Several reports for several operating units

    Hi all

    I have a requirement as below. I need some ideas as to what may be the approach.

    I have a report (name: something OU1 report) defined for OU1 operational unit. Now, I need set the same report for another unit of operation with just the changed name as ' OU2 something Report "-which runs to power or 2.

    How to achieve this? We just create a COPY of the first report and rename it in the window define concurrent programs and assign it to the second operational unit? Or y at - it another option?

    Any thoughts/help will be appreciated.

    Thank you

    In my humble OPINION, it's an absurd requirement ;-)

    A possible solution is to create several simultaneous requests (whose name desired), but they all use the same simultaneous executable.


  • Configure alarms for VMware Datastore latency in version FREE Foglight!

    Hi all

    I downloaded the version free foglight and that I imported the FVO in my test harness. I want that when a data store has over 50ms latency so I should launch an alert.

    I can't see the alarms on the console free foglight.

    Can you please how can I do to achieve the same thing.

    Thank you


    Hi vaibhav,

    The free version does not include a rule to check latency of data store. I checked with development and looks like a new rule has been added to the Foglight for virtualization Enterprise Edition 7.2 (to be released in the following months). The new rule is called: VMW Datastore total latency.

    For the moment, in my view, there is a latency of data store rule included in one of the established community of cartridges. These cartridges are not created by Dell and are not supported. Take a look at it and see if it meets your request.

    Note: If your Foglight does not have the ability to install cartridges, chances are that you are running the Standard Edition version. If you have problems, please indicate the full version number. You should find it in the topic of the article.



  • Custom report for assistance of the form


    We just finished a contest where we collected the customer details. The e-mail address field should be no mandatory if we have hidden the required field in the code creating an email by default to work around and created our own text for the email address field.

    The problem is, when I extracted the data, the first name and last name fields that were in the form are white. Is it possible to access these data?

    Screen Shot 2015-03-23 at 9.57.04 am.png

    Thank you

    BC uses the address of electronic mail as a primary key, so I guess that FirstName and LastName have been replaced with a presentation of each new, rather than be unique for each presentation.

    In addition, if any entry name attributes that not exactly matches the field names BC was expected, that the data were never recorded.

  • Custom reports for IPCC Express

    I know with version 3.1, you can customize reports using Crystal but I can´t find information related to version 3.5 (3). Is is possible to use the Crystal also with this version?

    Yes. The compatibility matrix shows which is supported:

  • Directory of different report for each subsequence


    My test sequence contains a number of subsequences, representing different tests, which can be run separately.

    When all the subsequences (tests) is selected to be executed by the operator (as "Run selected Tests" and not as a part of "USE Test") I have to save the test report to its specific subdirectory in the reports directory. To do this, I created a variable in StationGlobals, which contains the name of the sub directory and is changed in the configuration section for each subsequence (test), according to the name of the test.

    I am trying to use the following expression as a path to the report file in Report Options:

    "StationGlobals.ReportsDirectory+"\\SN_\\"+StationGlobals.TestSubDirectory+"\\SN_[] []."

    The problem is that the path of the report expression is read before execution of the selected step starts (and the StationGlobals.TestSubDirectory is changed), this is why the report is always saved in the subdirectory of the previously executed test. Any change in the StationGlobals.TestSubDirectory made by the subsequence running will be 'seen' in the next run of one of the subsequences.

    I tried also to change the reports using the ReportOptions Callabck directory, but the same problem stop there as well (is executed before the subsequence selected, changing the StationGlobals, TestSubDirectory to the value of specific test).

    How can I get the name of the subsequence selected for execution in order to build a custom report for this subsequence directory/path?

    Other means will be appreciated as well.


    I solved the problem using my custom LabVIEW interface:

    When the report is displayed in the status display window, I send it to a printer. At this point, I read the value of the global variable Station (from TS), which contains the name of the directory in which the report should be saved (this variable has been already changed by the executed subsequence). Then I change the path to the PDF printer, depending on the value of the global of the Station, so that the report PDF file is placed in the correct directory.

  • Custom reports IPCCX

    Dear professionals,

    I am new to creating custom reports. To my knowledge, the only way to do it is to use Crystal Reports and query the database db_cra. This database provides the most granular information available? I know that there is a document database IPCCX schema, however, is there a document that describes the existing stored procedures?

    Thank you very much.



    See the following URL for the custom reports for IPCC Express crearing.



  • HASH value in a custom report


    I created a custom report for Top SQL on a monitored by Foglight Oracle DB. During the creation, for the input data, I check the HASH value. OK, it shows HASH values, but the format is not identical to the database.

    In the database, I have for example 432647

    but in Foglight report I 45 M or 67G.

    I am amazed. What is the problem with my report?

    Thank you.

    It looks like an inappropriate rendering engine has been configured for this area of the custom report. Did you leave the default rendering engine? If so, try some of the other converters and see if you get a better result.

    Kind regards

    Brian Wheeldon

  • Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.

    Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.

    Is this problem will soon be resolved? Thank you!

    You MUST have a 64-bit computer and operating system... What is your computer?

    -Programs are supposed TO not view or download if they are not installed on your computer

    MINIMUM for After Effects and Premiere Pro

  • I get it during the installation of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

    I get this message when installing an upgrade of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

    Warning: "Adobe software real failure of Validation...". » | Windows

  • Essential support for creating custom reports on "Openmanage" using "Essentials" command line Interface

    Good afternoon

    Please can you help to create custom reports in "Essential Openmanage" using "Essentials" command line Interface

    The default reports are not feasible.

    Hi there Oswaldo and thank you for the question.

    Currently, OME 1.3 doesn't have a custom report generator.  I don't think that the CLI help as it is mainly used to set up from the beaches of discovery and things like that.

    There is a REST API that _may_ allow to return by the data of the database of the MEO program.  The REST API guide is in the section of the Documentation on the Dell TechCenter for OME page.

    Thank you


  • Custom reports schedule out for these last days 2...

    I tried for a few days to create a custom - report

    When I click reports > custom reports > ecommerce > I select product and click Next and it expired systematically for a few days now...

    This kind of things is the reason why we deviate from British Colombia - you would think if great that adobe is that this platform would be more robust and stable. Very disappointing.

    * sigh *.

    Hi Tom,

    You mention support live chat case or worn?  This is obviously not a normal behavior and should be wound so past yet.

    If you have an existing case please provide it so I can check the status.  Otherwise, please proceed in direct support with this.

    Kind regards


  • Run the FDM report on several places


    We are the FDM What I'm trying to do is the design/FDM reports may change so that she can turn on several locations. I can get the report to run on the current location, a location selected by the user or can get it to work on all locations (takes way too long). I want to be able to do is put up to run the report for all children under a review of control location. Anyone who has ever tried this or you have understand how? Any suggestion would be appreciated.

    Thank you

    To think.

    The best way to proceed would be to have a stored procedure / SQL query that the report will hit that will give him exactly what he needs.

    -If you're OK with hard coding values in places, I agree that it is a good idea to group Tag. You can retrieve all the places with a query such as:

    select * from tPOVPartition where PartNotes = 'GroupNameHere'

    or assuming that it will be used where clause:

    Select blah blah blah
    the blah blah blah
    where blah blah blah and (PartitionKey to (select PartitionKey from tPOVPartition where PartNotes = 'GroupNameHere'))


    -If you are NOT OK with rigid group coding labels and just want to let the natural hierarchy works, there is hope.

    By using the tStructParitionLinks table, you can browse the hierarchy and get your list.

    Assuming that You have nothing deeper that the 1 level, the SQL tracking will work:
    (NOTE: place of departure would be the parent and Endlocation child)

    SELECT     a.StartLocationID, a.EndLocationID, b.PartName
    FROM         tStructPartitionLinks AS a INNER JOIN
                          tPOVPartition AS b ON a.EndLocationID = b.PartitionKey
    where a.StartLocationID = 

    The problem here is that if you have several nested levels, this query will not return all the basic elements. If you need something to do, what you want to do is to create a nested stored procedure. I won't provide a because it would take me a bit to write.

    The basic premise is:
    -The stored procedure accepts an input parameter, ParentID
    -The stored procedure uses a temporary table to store the results of
    -The stored procedure keeps track of its recursive level and starts at one. (SQL Server handles this built in, assume as well done oracle)
    -When you call the routine, he takes the ParentID, analyzes the link Partition table and out of all the children who are directly linked to it.
    -For each of the children, it adds an entry to the temporary database table.
    -Then, it checks to see if this book of the child is also a parent in the table.
    -If it's a parent, he calls another instance of itself (stored procedure) this time passing the ID of the child as the ID of the parent
    -Possibly after you have exhausted all children/parents, you find yourself at the end of the initial call and at this stage, you return the content of the temporary table.


    -A third option would be to use the FDM script to achieve this. In theory, you could throw something in a script, have it pull the list of children and do pass this info on to the report and run it. The following script will give you a list of children for a parent:

    Sub ShowChildren()
    'Hyperion FDM CUSTOM Script:
    'Created By:       cbeyer
    'Date Created:       2012-02-22-10:43:06
    'Declare variables
    Dim lngLocID
    Dim lngParentID
    Dim strParentName
    Dim strChildren 
    'Get current ID by current POV
    'NOTE: You could easily change this around to accept a parameter, etc, by using GetName/GetID calls shown below.
    lngLocID = STRUCTMGR.fGetLocationIDFromName(API.POVMgr.PPOVLocation)
    'Get parent ID
    lngParentID = STRUCTMGR.fGetLocationParent("Controls", lngLocID)
    'Get Name of parent
    strParentName = STRUCTMGR.fGetLocationName("Controls", lngParentID)
    'Create recordset and Enumerate children
    With STRUCTMGR.frsChildrenAll("Controls", lngLocID)
       If Not .BOF And Not .EOF Then
           Do While Not .EOF
              strChildren = strChildren & .Fields("PartName").Value & vbCrLf
           'No children
           strChildren = "Location has no children"
       End If
       'Close recordset
    End With
    'Display the children information
    If LCase(API.DataWindow.Connection.PstrClientType) = "workbench" Then
         MsgBox "List of Children for " & strParentName & " : " & strChildren
         'Web Client (Set API action properties)
         RES.PlngActionType = 2
         RES.PstrActionValue = "List of Children for " & strParentName & " : " & strChildren
    End If
    End Sub

Maybe you are looking for