Customer FTP works does not in Windows 7

I am completely confused at this point.

Any FTP client I use, I can not connect to any FTP site.

I checked that there is no limitation on my router, and I called my ISP to confirm.

I have my firewall Windows completely shut down and restarted my computer with my Panda Antivirus disabled.

Connect to any FTP or SFTP site gives me the following error:

Connection has expired.

First of all, this problem has occurred by using FileZilla, which is the program that I have used in the past to connect through sftp on my site.

I run The Network Setup Wizard and left my FTP connection in passive and he told me that I had an incorrect external IP address.

I went back in and put my FTP connection as Active and this allowed me to connect, but at the very last stage, it hangs and then reports Connection timed out.

I used programs like WinSCP and PuTTY to connect as well, and they both give me the same error: Connection timed out.

Someone at - it recommendations for troubleshooting?

I'm open to suggestions, if there is something that I may have missed in my settings also router.

Hi Liam,

Welcome to Microsoft Community forum.

I suggest you follow the suggestion provided by Muhammad Adeel Jules replied on 17 March 2013 in the next thread.

FTP does not connect in Windows 8

Note: the thread deals with Windows 8 , but the steps mentioned applies to Windows 7 .

For more information, you can also check out the link below.

File Transfer Protocol (FTP): frequently asked questions

Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

Thank you.

Tags: Windows

Similar Questions

  • FTP works does not on windows 7

    I have windows 7 and cannot access ftp sites, instead I get the message "425 can't open data connection". I checked the advanced on my firewall settings and all the firewall options are disabled. Which should I use to be able to download items from reputable sites, and which I use to be able to download from reputable sites without leaving me exposed to others?

    I had the same error 425.  My script FTP file was executed by scheduled tasks.  I found that using the FTP - option solved the problem for me.  Hope this helps someone.

  • WRT610N - FTP works does not correctly

    Hello

    I installed the latest firmware, b 02, 10. It's a total mess with FTP, it does not work correctly:

    -I can't share the whole disc and see the files with windows Explorer

    -J 'have a lot of files in a folder of 2' 500 and 1000 only appear in windows Explorer!

    -by transfer ftp, router hangs up

    ...

    I use windows XP, FileZilla Client and the latest version of each driver or program. I tried to format the drive (NTFS btw), restart the router, restore the default settings (with the web admin button). ...

    It seems I have to wait a few months to use the router as advertised! It's a scandal!

    OK, finally I got it back working again:

    -format the HD and giving him a short name ("external")

    -Reset by webUI

    -flash

    -new reset by webUI

    -new configures the router

    I managed to share the same directory ftp and external drive, which is the directory root named "external".

    As expected, the speed is still poor, and some bugs are still new: in a dir I have 2000 + files in the windows Explorer that they are not all shown (about 1000).

    This router is my biggest disappoinement in the material ever.

  • Satellite A100: webcam works does not for windows live messenger on Vista

    I recently lost my picture when working for video calls in windows live messenger, the sound of two ways and I can see them, but no one can see me.
    I also bought an external webcam, and it does not work either.

    When I go to Device Manager it says that the two cams don't work properly.
    I tried to update the drivers but they are up-to-date.
    I wonder if it's a problem of Windows live or Toshiba.
    I use Windows Vista Home Premium and the new version of messenger.

    > I also bought an external webcam and it doesn t work either.
    > When I go to Device Manager it says that the two cams don't work properly

    For me, it looks like a windows system problem.
    Usually two webcams operate independently from each other and so I don t think that it is a webcam driver problem I think that it s windows or windows live messenger problem
    Maybe something confused keys registry or files may be some updates to update or similar

    In your case, I recommend you to uninstall the software of webcam software, internal external webcam and the windows live messenger.
    Then, you must clean the BONES and the registry tool like CCLeaner cleaning, for example. It the free tool.

    After this, reinstall the Chicony webcam software and test functionality without installation of windows live messenger.
    If the webcam will be functions then you could install the windows live messenger again.

  • Want Dv6 - 7300st: finger print works does not for Windows 10

    Hello

    I've updated 10 64-BIT windows. then after I find, validity wbf ddk driver does not. It engages and works in the background

    Please help me driver for windows 10 64-BIT

    Hi @mahmutbasar,

    There is no newer driver for Windows 10 fingerprint sensor. It seems that the old driver is not compatible with the Windows 10 either. So, if the fingerprint work in previous windows, it's a matter of software with Windows 10.

  • ITunes 9.1 works does not for Windows Vista

    I've recently updated itunes 9.1 and when I click to open the program, nothing happens

    It is open in the process in the Task Manager

    I tried to uninstall, download of the installer on the itunes site and still does not work

    I am running Windows Vista

    Help would be greatly appreciated, thanks

    Hi all

    You can watch on the Apple site for troubleshooting iTunes and Windows Vista.

    http://www.Apple.com/support/iTunes/

    The article watch is titled: iTunes for Windows Vista or 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Webcam works does not for windows 8

    Hello

    Yesterday I installed GoogleVoiceandVideoSetup to use Gtalk WebCam but after installing it, my webcam does not work.
    It doesn't show any picture, can someone help me on this.
    Kind regards
    Gaurav Dey

    I found the solution: -.

    I went to the Device Manager. Rode to the previous setting, and after that I re-installed the latest drivers and it works for me.
    :)
  • Export custom LUTS works does not in 2015?

    I just upgraded to 2015. However I export the coils that usually, I add a custom .cube LUT for export. In the 2015 version, this gives just a low level error and nothing happens. Encoder Media also seems to me does not allow to select a LUT either. Everyone race in this issue?

    My current workaround is to change in Pr2014.

    Hi mercy,.

    Yes, we have reported this problem to the relevant team.

    Also, you can open the color Lumetro Panel and apply to READ it and then try to export by Media Encoder.

    Check out the link for more information below.

    Export with a LUT

    Vinay

  • FTP works does not correctly

    For some reason any my site tries to recharge completely every time I do an FTP transfer.  Since my site has about 1,000 static images which are used to search only the FTP process can take up to two hours where it should take a few minutes.  It's like the Muse does not compare the images to see if they have changed and need download.

    (1) when there is an update of Muse, the generation of code changes (for new features, bug fixes, workarounds for bugs in the updates of the browser, performance improvements, etc.). Files of a Web site are linked together, that is why most of the records is regenerated and re downloaded, because most will have been changed due to the change of code generation.

    (2) for the 2014.3 update the compression of the image has been improved (especially for PNG images). This is why the images of your site are likely to have changed (to now be in smaller files and so more fast loading time of a page for visitors to the site) as a result of the update. So they're all being downloaded.

    Once you have downloaded with a version specific muse and saved your following to .muse file download, later additions should be that for all the files affected by any changes have been made since the previous download.

  • Pavilion dvd-6b27nr: 25-digit Code of Activation on the botom of my laptop works does not for Windows 10 Upgrade

    The machine was updgraded to 10via the free update of microsoft windows.  I did an update of the windows 10 system today and the aircraft crashed.  Try to re - load windows 10 and now it's saying my product from the bottom of my laptop key) is bad.

    I'm stuck the recovery partion disappeared, so the only option I have is windows 10...

    You can not install Windows 7 Pro with a Windows Home key. You must create the Windows 10 installation media using the multimedia authoring tool and install it according to the instructions in the previous links.

    You can install Windows 10 KEYLESS.

    https://www.Microsoft.com/en-us/software-download/Windows10

  • Installer of Firefox works does not for Windows 8.1?

    I downloaded the latest installer of Firefox and tried to run. I had the Windows prompt to accept the installation of the software and then... nothing. The installer never runs. Does anyone know what seems to be the problem?

    If you caught the small Installer "stub" on the main page, try again using the "full" Installer on the 'all versions' page here (scroll down to your language):

    https://www.Mozilla.org/en-us/Firefox/all/

    This one does work on Windows 8.1?

  • Internet works does not for Windows 7 on Pavilion g4-2235dx.

    G4-2235dx Pavilion

    Windows 7

    Downloaded Windows 7 on a new computer with Windows 8

    Ethernet controller:

    Download and install the 6th on the list (auto install):

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    Network wireless controller:

    http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54972.exe

    PCI device:

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56545.exe

    SM BUS controller and Bus USB controller: Download Driver Chipset

    http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  • MFC - 290C scanner does not. Windows error solution

    MFC - 290C scanner does not. Windows error solution

    Hello

    ·        You did changes to the computer before the show?

    ·        If it works much earlier?

    ·        What is the exact error message you get?

    I suggest that you follow the steps in the link and check if it helps you to solve the problem:

    http://www.brother.com/E-FTP/windowsvista/us.html

  • WIFI doesn't work does not correctly after driver update

    I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

    Problems...

    1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

    2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

    If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

    If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

    For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

    Best regards
    ERICO

  • Software LJ 2055dn - FTP site does not?

    Hi people, tried to download the installer for the Laserjet 2055dn but the HP FTP site does not respond.  Can someone give me a HTTP link for the installation of the complete software for the United States / Europe?

    Much obliged if you can help!

    Hello

    I have no problem with them (I mean, I took 5 of them randomly). You can try a different browser to see any good - I use Firefox.

    Please try this and let me know that it does not work:

    http://ftp.HP.com/pub/softlib/software11/COL33807/LJ-84320-1/P2055_default_install_v6.1_ww.exe

    Kind regards.

Maybe you are looking for